L Commands

l2-unknown-unicast

l2-unknown-unicast <WORD>

Description: Change Unknown Unicast flood behavior

Syntax:

WORD

Unicast Unknown threatment

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# l2-unknown-unicast <WORD>

l3-unknown-multicast

l3-unknown-multicast <WORD>

Description: Change L3 Multicast flood behavior

Syntax:

WORD

IP Multicast unknown Fram handling

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# l3-unknown-multicast <WORD>

l3out

l3out <WORD>

Description: Configuration for L3Out

Syntax:

WORD

L3Out name (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l3out <WORD>

l4l7-peer

l4l7-peer tenant <WORD> out <WORD> epg <WORD> redistribute WORD

Description: Configure l3external epg association for a l4l7 graph connector.

Syntax:

tenant

tenant under which the l3external epg resides

WORD

WORD

out

l3external outside name

WORD

WORD

epg

l3external-epg name

WORD

WORD

redistribute

Protocol Redistribute Settings

WORD

Protocol Redistribute Settings

Command Mode: connector : Configure Connector for a Service Node

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 graph <WORD> [contract <contract-option>]
(config-graph)# service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode <Available Modes>]
(config-service)# connector <WORD> [cluster-interface <WORD>]
(config-connector)# l4l7-peer tenant <WORD> out <WORD> epg <WORD> redistribute WORD

l4l7

l4l7 graph <WORD>

Description: Associate a l4l7 graph with this subject

Syntax:

graph

l4l7 graph to associate with

WORD

Service Graph name (Max Size 64)

Command Mode: subject : Configuration a subject on the contract

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# subject <WORD>
(config-tenant-contract-subj)# l4l7 graph <WORD>

l4l7 cluster import-from

l4l7 cluster import-from <WORD> device-cluster <WORD>

Description: Import a L4-L7 Service Device Cluster

Syntax:

WORD

Tenant name (Max Size 63)

device-cluster

Device Cluster name

WORD

Device cluster name (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster import-from <WORD> device-cluster <WORD>

l4l7 cluster name

l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]

Description: Add a L4-L7 Service Device Cluster

Syntax:

WORD

Device cluster name (Max Size 64)

type

Type of l4l7 Device Cluster

type

Type of l4l7 Device Cluster

vlan-domain

Physical or Virtual vlan domain to use for allocating encaps

<domain-name>

Physical Or Virtual vlan domain to use for allocating encaps

service

(Optional) Indicates the type of service the device cluster provides

function

(Optional) Indicates the type of function the device cluster provides

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]

l4l7 graph

l4l7 graph <WORD> [contract <contract-option>]

Description: Configure L4-L7 Service Graph

Syntax:

WORD

Service Graph name (Max Size 64)

contract-option

(Optional) Name of Contract

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 graph <WORD> [contract <contract-option>]

label match

label match provider|consumer any|one|all|none

Description: Specify the match type for the provider or consumer label

Syntax:

provider

Matching type for provider

consumer

Matching type for consumer

any

Match if ANY label is found in the contract relation

one

Match if exactly ONE label is found in the contract relation

all

Match if ALL labels are found in the contract relation

none

Match if NO labels are found in the contract relation

Command Mode: subject : Configuration a subject on the contract

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# subject <WORD>
(config-tenant-contract-subj)# label match provider|consumer any|one|all|none

label name

label name <WORD> provider|consumer

Description: Add a provider or consumer label to the subject

Syntax:

WORD

Name of the label to add (Max Size 64)

provider

Matching type for provider

consumer

Matching type for consumer

Command Mode: subject : Configuration a subject on the contract

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# subject <WORD>
(config-tenant-contract-subj)# label name <WORD> provider|consumer

lacp fast-select-hot-standby

lacp fast-select-hot-standby

Description: Enable LACP fast select for hot standby ports

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# lacp fast-select-hot-standby

lacp fast-select-hot-standby

Description: Enable LACP fast select for hot standby ports

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# lacp fast-select-hot-standby

lacp fast-select-hot-standby

Description: Enable LACP fast select for hot standby ports

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# lacp fast-select-hot-standby

lacp graceful-convergence

lacp graceful-convergence

Description: Enable LACP graceful convergence

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# lacp graceful-convergence

lacp graceful-convergence

Description: Enable LACP graceful convergence

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# lacp graceful-convergence

lacp graceful-convergence

Description: Enable LACP graceful convergence

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# lacp graceful-convergence

lacp load-defer

lacp load-defer

Description: Enable LACP load defer member ports

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# lacp load-defer

lacp load-defer

Description: Enable LACP load defer member ports

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# lacp load-defer

lacp load-defer

Description: Enable LACP load defer member ports

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# lacp load-defer

lacp max-links

lacp max-links <NUMBER>

Description: Configure maximum number of links

Syntax:

<number>

Range 1 to 16. Number range from=1 to=16

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# lacp max-links <NUMBER>

lacp max-links <NUMBER>

Description: Configure maximum number of links

Syntax:

<number>

Range 1 to 16. Number range from=1 to=16

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# lacp max-links <NUMBER>

lacp max-links <NUMBER>

Description: Configure maximum number of links

Syntax:

<number>

Range 1 to 16. Number range from=1 to=16

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# lacp max-links <NUMBER>

lacp min-links

lacp min-links <NUMBER>

Description: Configure minimum number of links

Syntax:

<number>

Range 1 to 16. Number range from=1 to=16

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# lacp min-links <NUMBER>

lacp min-links <NUMBER>

Description: Configure minimum number of links

Syntax:

<number>

Range 1 to 16. Number range from=1 to=16

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# lacp min-links <NUMBER>

lacp min-links <NUMBER>

Description: Configure minimum number of links

Syntax:

<number>

Range 1 to 16. Number range from=1 to=16

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# lacp min-links <NUMBER>

lacp port-priority

lacp port-priority <arg>

Description: Set Lacp priority

Syntax:

arg

Priority Value. Number range from=1 to=65535

Command Mode: leaf-interface-group : Configure Leaf Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>
(config-leaf-if-group)# lacp port-priority <>

lacp port-priority <arg>

Description: Set Lacp priority.

Syntax:

arg

Priority Value. Number range from=1 to=65535

Command Mode: fex-interface-group : Configure Fex Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# fex-profile <WORD>
(config-fex-profile)# fex-interface-group <WORD>
(config-fex-if-group)# lacp port-priority <>

lacp port-priority <NUMBER>

Description: Set Lacp priority.

Syntax:

<1-65535>

Priority Value. Number range from=1 to=65535

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# lacp port-priority <NUMBER>

lacp port-priority interface

lacp port-priority <arg> interface ethernet

Description: Set Port Priority on specific Ports

Syntax:

arg

Priority Value. Number range from=1 to=65535

ethernet

Configure Physical Interface

arg

Provide range of Interfaces

Command Mode: leaf-interface-group : Configure Leaf Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>
(config-leaf-if-group)# lacp port-priority <> interface ethernet

lacp port-priority <arg> interface ethernet

Description: Set Port Priority on specific Ports

Syntax:

arg

Priority Value. Number range from=1 to=65535

ethernet

Configure Physical Interface

arg

Provide range of Interfaces

Command Mode: fex-interface-group : Configure Fex Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# fex-profile <WORD>
(config-fex-profile)# fex-interface-group <WORD>
(config-fex-if-group)# lacp port-priority <> interface ethernet

lacp rate

lacp rate fast|normal

Description: Set Lacp rate

Syntax:

fast

Set rate to fast

normal

Set rate to normal

Command Mode: leaf-interface-group : Configure Leaf Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>
(config-leaf-if-group)# lacp rate fast|normal

lacp rate fast|normal

Description: Set Lacp rate

Syntax:

fast

Set rate to fast

normal

Set rate to normal

Command Mode: fex-interface-group : Configure Fex Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# fex-profile <WORD>
(config-fex-profile)# fex-interface-group <WORD>
(config-fex-if-group)# lacp rate fast|normal

lacp rate fast|normal

Description: Set Lacp rate

Syntax:

fast

Set rate to fast

normal

Set rate to normal

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# lacp rate fast|normal

lacp rate fast normal interface

lacp rate fast|normal interface ethernet

Description: Set Port Priority on specific Ports

Syntax:

fast

Set rate to fast

normal

Set rate to normal

ethernet

Configure Physical Interface

arg

Provide range of Interfaces

Command Mode: leaf-interface-group : Configure Leaf Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>
(config-leaf-if-group)# lacp rate fast|normal interface ethernet

lacp rate fast|normal interface ethernet

Description: Set Port Priority on specific Ports

Syntax:

fast

Set rate to fast

normal

Set rate to normal

ethernet

Configure Physical Interface

arg

Provide range of Interfaces

Command Mode: fex-interface-group : Configure Fex Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# fex-profile <WORD>
(config-fex-profile)# fex-interface-group <WORD>
(config-fex-if-group)# lacp rate fast|normal interface ethernet

lacp suspend-individual

lacp suspend-individual

Description: Enable LACP individual Port suspension

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# lacp suspend-individual

lacp suspend-individual

Description: Enable LACP individual Port suspension

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# lacp suspend-individual

lacp suspend-individual

Description: Enable LACP individual Port suspension

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# lacp suspend-individual

last-name

last-name <WORD>

Description: Set The last name of the locally-authenticated user.

Syntax:

WORD

last name (Max Size 32)

Command Mode: username : Create a locally-authenticated user account

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# last-name <WORD>

ldap-server attribute

ldap-server attribute <WORD>

Description: An LDAP endpoint attribute to be used as the CiscoAVPair

Syntax:

<WORD>

LDAP endpoint attribute (Max Size 63)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server attribute <WORD>

ldap-server basedn

ldap-server basedn <WORD>

Description: The LDAP base DN for user lookup in the LDAP directory tree

Syntax:

<WORD>

user lookup in LDAP directory tree (Max Size 127)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server basedn <WORD>

ldap-server filter

ldap-server filter <WORD>

Description: LDAP search filter for the LDAP endpoint

Syntax:

<WORD>

search filter for the LDAP endpoint (Max Size 63)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server filter <WORD>

ldap-server host

ldap-server host <A.B.C.D|A:B::C:D|WORD>

Description: LDAP server DNS name or IP address

Syntax:

A.B.C.D|A:B::C:D|WORD

Provide a hostname or IPV4/IPV6 address

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>

ldap-server retries

ldap-server retries <NUMBER>

Description: Global LDAP server retransmit count

Syntax:

<0-5>

Global LDAP server retransmit count. Number range from=0 to=5

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server retries <NUMBER>

ldap-server timeout

ldap-server timeout <NUMBER>

Description: Global LDAP server timeout period in seconds

Syntax:

<1-60>

Global LDAP server timeout period in seconds. Number range from=1 to=60

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server timeout <NUMBER>

leaf-group

leaf-group <WORD>

Description: Configure Leaf Group

Syntax:

WORD

Leaf Group name (Max Size 64)

Command Mode: leaf-profile : Configure Leaf Profile

Command Path:

# configure [['terminal', 't']]
(config)# leaf-profile <WORD>
(config-leaf-profile)# leaf-group <WORD>

leaf-interface-group

leaf-interface-group <WORD>

Description: Configure Leaf Interface Group

Syntax:

WORD

Leaf Interface Group name (Max Size 64)

Command Mode: leaf-interface-profile : Create Leaf Interface Profile

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>

leaf-interface-profile

leaf-interface-profile <WORD>

Description: Create Leaf Interface Profile

Syntax:

WORD

Leaf Interface Profile name (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>

leaf-interface-profile <WORD>

Description: Attach Leaf Interface Profile to the Leaf Profile

Syntax:

WORD

Leaf Interface Profile name (Max Size 64)

Command Mode: leaf-profile : Configure Leaf Profile

Command Path:

# configure [['terminal', 't']]
(config)# leaf-profile <WORD>
(config-leaf-profile)# leaf-interface-profile <WORD>

leaf-policy-group

leaf-policy-group <WORD>

Description: Configure leaf policy group

Syntax:

WORD

Leaf policy name (Max Size 64)

Command Mode: leaf-group : Configure Leaf Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-profile <WORD>
(config-leaf-profile)# leaf-group <WORD>
(config-leaf-group)# leaf-policy-group <WORD>

leaf-profile

leaf-profile <WORD>

Description: Configure Leaf Profile

Syntax:

WORD

Leaf Profile name (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# leaf-profile <WORD>

leaf

leaf <101-4000>

Description: Provide a Range of Nodes

Syntax:

<101-4000>

Leaf Range or Leaf Name List

Command Mode: leaf-group : Configure Leaf Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-profile <WORD>
(config-leaf-profile)# leaf-group <WORD>
(config-leaf-group)# leaf <101-4000>

leaf <101-4000>

Description: Configure Leaf Node

Syntax:

<101-4000>

Leaf Range or Leaf Name List

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>

legacy

legacy forwarding vlan <NUMBER> vlan-domain <WORD>

Description: Set the bridge domain to behave as a L2 vlan in traditional ethernet environment

Syntax:

forwarding

Forwarding keyword

vlan

Legacy Vlan Number

<1-4094>

Legacy Vlan Number. Number range from=1 to=4094

vlan-domain

Name of the vlan domain to use

WORD

Name of the vlan domain to use (Max Size 64)

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# legacy forwarding vlan <NUMBER> vlan-domain <WORD>

link

link debounce time <NUMBER>

Description: Configure link

Syntax:

debounce

Configure link debounce timer

time

Link debounce time

<time>

Timer value (in milliseconds). Number range from=0 to=5000

Command Mode: template policy-group : Configure Policy Group Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# link debounce time <NUMBER>

link debounce time <NUMBER>

Description: Configure link

Syntax:

debounce

Configure link debounce timer

time

Link debounce time

<time>

Timer value (in milliseconds). Number range from=0 to=5000

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# link debounce time <NUMBER>

link debounce time <NUMBER>

Description: Configure link

Syntax:

debounce

Configure link debounce timer

time

Link debounce time

<time>

Timer value (in milliseconds). Number range from=0 to=5000

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# link debounce time <NUMBER>

link debounce time <NUMBER>

Description: Configure link

Syntax:

debounce

Configure link debounce timer

time

Link debounce time

<time>

Timer value (in milliseconds). Number range from=0 to=5000

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# link debounce time <NUMBER>

link debounce time <NUMBER>

Description: Configure link

Syntax:

debounce

Configure link debounce timer

time

Link debounce time

<time>

Timer value (in milliseconds). Number range from=0 to=5000

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# link debounce time <NUMBER>

lldp

lldp receive|transmit|both|default

Description: Configure Interface LLDP parameters on DVS uplink ports

Syntax:

receive

Enable LLDP reception

transmit

Enable LLDP transmission

both

Enable LLDP in both directions

default

Remove LLDP override policy

Command Mode: configure-dvs : Configure a VMware Domain as DVS type

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-dvs
(config-vmware-dvs)# lldp receive|transmit|both|default

lldp receive|transmit|both|default

Description: Configure Interface LLDP parameters on AVS uplink ports

Syntax:

receive

Enable LLDP reception

transmit

Enable LLDP transmission

both

Enable LLDP in both directions

default

Remove LLDP override policy

Command Mode: configure-avs : Configure a VMware Domain as AVS (N1K) type

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-avs
(config-vmware-avs)# lldp receive|transmit|both|default

lldp receive|transmit

Description: Configure Interface LLDP parameters

Syntax:

receive

Enable LLDP reception on interface

transmit

Enable LLDP transmission on interface

Command Mode: template policy-group : Configure Policy Group Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# lldp receive|transmit

lldp receive|transmit

Description: Configure Interface LLDP parameters

Syntax:

receive

Enable LLDP reception on interface

transmit

Enable LLDP transmission on interface

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# lldp receive|transmit

lldp receive|transmit

Description: Configure Interface LLDP parameters

Syntax:

receive

Enable LLDP reception on interface

transmit

Enable LLDP transmission on interface

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# lldp receive|transmit

lldp receive|transmit

Description: Configure Interface LLDP parameters

Syntax:

receive

Enable LLDP reception on interface

transmit

Enable LLDP transmission on interface

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# lldp receive|transmit

lldp receive|transmit

Description: Configure Interface LLDP parameters

Syntax:

receive

Enable LLDP reception on interface

transmit

Enable LLDP transmission on interface

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# lldp receive|transmit

lldp holdtime

lldp holdtime <NUMBER>

Description: Specify the hold time to be sent in LLDP packets

Syntax:

<10-255>

Holdtime in sec. Number range from=10 to=255

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# lldp holdtime <NUMBER>

lldp reinit

lldp reinit <NUMBER>

Description: Specify the delay for LLDP initialization on an interface

Syntax:

<1-10>

Reinit Delay in sec. Number range from=1 to=10

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# lldp reinit <NUMBER>

lldp timer

lldp timer <NUMBER>

Description: Specify the rate at which LLDP packets are sent

Syntax:

<5-254>

Rate of packets in sec. Number range from=5 to=254

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# lldp timer <NUMBER>

local-as

local-as <NUMBER> no-prepend|replace-as|dual-as

Description: Local Autonomous System Configuration for a BGP Peer

Syntax:

<1-4294967295>

The local autonomous system number. Number range from=1 to=4294967295

no-prepend

Do not prepend local-as to updates from ebgp peers

replace-as

Replace real AS with local AS in the EBGP updates

dual-as

Accept either real AS or local AS from the ebgp peer

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# local-as <NUMBER> no-prepend|replace-as|dual-as

locality

locality <WORD>

Description: Set The city or town of the organization.

Syntax:

<WORD>

city or town (Max Size 64)

Command Mode: csr : A csr mode to create and hold an SSL certificate

Command Path:

# configure [['terminal', 't']]
(config)# crypto keyring <WORD>
(config-keyring)# csr
(config-csr)# locality <WORD>

logfile

logfile [severity <severity>]

Description: Enable the logging to logfile

Syntax:

severity

(Optional) The severity level for the logs

Command Mode: logging : Logging server group configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# logging server-group <WORD>
(config-logging)# logfile [severity <severity>]

logging

logging server-group <WORD>

Description: Logging server group configuration mode

Syntax:

server-group

Logging Server-Group configuration

WORD

Logging server-group name (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# logging server-group <WORD>

logging audit

logging audit

Description: Enable audit and session logs to the policy

Command Mode: callhome : Callhome common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# logging audit

logging audit

Description: Enable audit logs to the policy

Command Mode: syslog : Syslog common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# syslog common
(config-syslog)# logging audit

logging description

logging description <WORD>

Description: Add description for syslog common

Syntax:

WORD

Description (Max Size 128) surrounded by single quotes

Command Mode: syslog : Syslog common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# syslog common
(config-syslog)# logging description <WORD>

logging event

logging event

Description: Enable event logs to the policy

Command Mode: callhome : Callhome common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# logging event

logging event

Description: Enable event logs to the policy

Command Mode: syslog : Syslog common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# syslog common
(config-syslog)# logging event

logging fault

logging fault

Description: Enable fault logs to the policy

Command Mode: callhome : Callhome common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# logging fault

logging fault

Description: Enable fault logs to the policy

Command Mode: syslog : Syslog common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# syslog common
(config-syslog)# logging fault

logging server-group

logging server-group <WORD>

Description: Logging server group configuration

Syntax:

WORD

Logging server-group name (Max Size 64)

Command Mode: syslog : Syslog common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# syslog common
(config-syslog)# logging server-group <WORD>

logging session

logging session

Description: Enable session logs to the policy

Command Mode: syslog : Syslog common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# syslog common
(config-syslog)# logging session

logging severity

logging severity info|notice|emergency|alert|critical|error|debug|warning

Description: Configure minimum severity level for logs generated

Syntax:

info

Info

notice

Notice

emergency

Emergency

alert

Alert

critical

Critical

error

Error

debug

Debug

warning

Warning

Command Mode: callhome : Callhome common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# logging severity info|notice|emergency|alert|critical|error|debug|warning

logging severity emergencies|debugging|critical|errors|warnings|information|alerts|notifications

Description: Configure minimum severity level for logs generated

Syntax:

emergencies

Emergencies

debugging

Debugging

critical

Critical

errors

Errors

warnings

Warnings

information

Information

alerts

Alerts

notifications

Notifications

Command Mode: syslog : Syslog common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# syslog common
(config-syslog)# logging severity emergencies|debugging|critical|errors|warnings|information|alerts|notifications

lsp-fast-flood

lsp-fast-flood

Description: Enables the ISIS LSP fast flood

Command Mode: isis : Intermediate System to Intermediate System (IS-IS)

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# isis fabric
(config-pod-isis)# lsp-fast-flood

lsp-gen-interval

lsp-gen-interval level-1 <NUMBER> <50-120000> <50-120000>

Description: Set the ISIS LSP generation maximal wait interval

Syntax:

level-1

Level 1

<50-120000>

LSP generation maximum wait interval. Number range from=50 to=120000

<50-120000> <50-120000>

Initial and secondary wait intervals (both values are required)

Command Mode: isis : Intermediate System to Intermediate System (IS-IS)

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# isis fabric
(config-pod-isis)# lsp-gen-interval level-1 <NUMBER> <50-120000> <50-120000>

lsp-mtu

lsp-mtu <NUMBER>

Description: Set the configuration of link-state packet (LSP) maximum transmission units (MTU) value

Syntax:

<256-4352>

The configuration of link-state packet (LSP) maximum transmission units (MTU).. Number range from=256 to=4352

Command Mode: isis : Intermediate System to Intermediate System (IS-IS)

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# isis fabric
(config-pod-isis)# lsp-mtu <NUMBER>