bandwidth <NUMBER>

Description: Set the desired bandwidth to police to

Syntax:

Command Mode: qos parameters : Configure the global QOS policies

Command Path:

# configure [['terminal', 't']]
(config)# qos parameters level1|level2|level3
(config-qos)# bandwidth <NUMBER>

basedn <WORD>

Description: The LDAP base DN for user lookup in the LDAP directory tree

Syntax:

Command Mode: ldap-server host : LDAP server DNS name or IP address

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# basedn <WORD>

bash

Description: bash shell for unix commands

Command Mode: exec : Exec Mode

Command Path:

# bash

bfd enable

Description: Enable Bidirectional Forwarding Detection

Syntax:

Command Mode: template ospf interface-policy : Configure OSPF Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf interface-policy <WORD> tenant <WORD>
(config-interface-policy)# bfd enable

bfd enable

Description: Enable Bidirectional Forwarding Detection

Syntax:

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# bfd enable

bfd ip|ipv6 authentication keyed-sha1 keyid <NUMBER> key <WORD>

Description: Configure BFD authentication

Syntax:

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# bfd ip|ipv6 authentication keyed-sha1 keyid <NUMBER> key <WORD>

bfd ip|ipv6 authentication keyed-sha1 keyid <NUMBER> key <WORD>

Description: Configure BFD authentication

Syntax:

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# bfd ip|ipv6 authentication keyed-sha1 keyid <NUMBER> key <WORD>

bfd ip|ipv6 inherit interface-policy <WORD>

Description: Inherit BFD interface template policy

Syntax:

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# bfd ip|ipv6 inherit interface-policy <WORD>

bfd ip|ipv6 inherit interface-policy <WORD>

Description: Inherit BFD interface template policy

Syntax:

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# bfd ip|ipv6 inherit interface-policy <WORD>

bfd ip|ipv6 tenant mode

Description: Enable BFD Tenant Mode

Syntax:

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# bfd ip|ipv6 tenant mode

bfd ip|ipv6 tenant mode

Description: Enable BFD Tenant Mode

Syntax:

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# bfd ip|ipv6 tenant mode

bgp fabric

Description: Border Gateway Protocol (BGP)

Syntax:

Command Mode: pod : Pod configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# bgp fabric

binddn <WORD>

Description: The LDAP bind DN for user lookup in the LDAP directory tree

Syntax:

Command Mode: ldap-server host : LDAP server DNS name or IP address

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# binddn <WORD>

bpdu-filter

Description: Enable BPDU filter for extended chassis ports

Command Mode: spanning-tree : STP MST configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# spanning-tree mst configuration
(config-stp)# bpdu-filter

bridge-domain <WORD>

Description: Configuration for bridge-domain

Syntax:

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>

bridge-domain member <WORD>

Description: Bind the EPG to a bridge-domain

Syntax:

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# bridge-domain member <WORD>

bridge-domain <WORD>

Description: Bind the EPG to a bridge-domain

Syntax:

Command Mode: inband-mgmt : Enter Inside In-band management mode to modify inband properties or create new inband

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# inband-mgmt epg <WORD>
(config-inb-epg)# bridge-domain <WORD>

bridge-domain member <WORD>

Description: Bind the EPG to a bridge-domain

Syntax:

Command Mode: external-l2 : L2 external EPG creation/configuration

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l2 epg <WORD>
(config-tenant-l2ext-epg)# bridge-domain member <WORD>

bridge-domain tenant <tenant> name <name>

Description: Configure Bridge Domain For a L4-L7 Graph Connector.

Syntax:

Command Mode: connector : Configure Connector for a Service Node

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 graph <WORD> [contract <contract-option>]
(config-graph)# service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode <Available Modes>]
(config-service)# connector <WORD> [cluster-interface <WORD>]
(config-connector)# bridge-domain tenant <tenant> name <name>