GNU Copyright Statement

Chapter 1. A Commands

aaa authentication login console

aaa authentication login default

aaa authentication login domain

aaa banner

aaa group server ldap

aaa group server radius

aaa group server tacacsplus

aaa scvmm-certificate

aaa user default-role

absolute

access-group

access-list

account-status

action

address-family

address

admin-state-enable

admin

advertise-subnet

aggregate-address

allow-origin

allow-self-as

allow-writes

allowed-self-as-count

application

area default-cost

area l3out

area loopback

area nssa

area nssa default-information-originate

area nssa no-redistribute

area nssa translate

area range

area route-map

area stub

arp flooding

asn

attribute

attribute match custom

attribute match datacenter

attribute match domain

attribute match guest-os

attribute match hypervisor-id

attribute match ip

attribute match mac

attribute match vm-id

attribute match vm-name

attribute match vnic

authenticate

authentication-key

auto-cost

autonomous-system

Chapter 2. B Commands

bandwidth

basedn

bash

bfd

bfd ip ipv6 authentication

bfd ip ipv6 inherit

bfd ip ipv6 tenant

bgp

binddn

bpdu-filter

bridge-domain

Chapter 3. C Commands

callhome

catalog-version

cdp

cert-chain

cert

certificate

channel-group

channel-mode

ciphers

clear-encryption-key

clear-pwd-history

clear endpoints

clear snapshot file

clear snapshot job

clear techsupport controllers

clear techsupport switch

clear troubleshoot epext session report

clear troubleshoot eptoep session report

clock display-format

clock show-offset

clock timezone

cluster-device

cluster-device query-device-health

cluster-device query-device-statistics

cluster-device query-device-validation

cluster-interface

comm-policy

configure-avs

configure-dvs

configure

connection intra service

connection terminal

connector

console

contract-id

contract

contract consumer

contract deny

contract enforce

contract provider

controller-group

controller

cost

country

crypto aes

crypto ca

crypto keyring

crypto webtoken

csr

customer-id

Chapter 4. D Commands

data

dead-interval

debug log reset

debug log set

decommission controller

decommission switch

default-information

default-originate

deploy-epg tenant application epg type

deploy-epg tenant application epg vlan

deployment-mode

descr

description

destination-profile

destination

destination destip

destination interface

destination tenant

dhcp option

dhcp relay policy

dhparam

direction

disable-connected-check

disable-peer-as-check

distance

dns

dnssearchsuffix

dnsservers

dnssuffix

domain

dsr-vip

dsr

Chapter 5. E Commands

ebgp-multihop

echo-address

echo-mode

echo-rx-interval

email-addr

email-contact

email

enable-ssl

encryption

end

endpoint

endpoint loop-detect action bd-learn-disable

endpoint loop-detect action port-disable

endpoint loop-detect enable

endpoint loop-detect factor

endpoint loop-detect interval

endpoint move-detection

endpoint retention bounce-age-interval

endpoint retention hold-interval

endpoint retention local-age-interval

endpoint retention move-frequency

endpoint retention policy

endpoint retention remote-age-interval

enforce-subnet-learning

epg

eraseconfig

errdisable recovery cause bpduguard

errdisable recovery cause ep-move

errdisable recovery cause mcp-loop

errdisable recovery interval

erspan-id

exec

exit

expiration

expires

export

external-l2

external-l3

external-l3 epg

Chapter 6. F Commands

fabric clear

fabric show

fex-interface-group

fex-profile

fex

file

filter

filter tenant bd

filter tenant vrf

firewall-logging

firewall

firmware-version

firmware

firmware repository add

firmware repository delete

firmware upgrade controller-group

firmware upgrade switch-group

first-file

first-name

format

Chapter 7. G Commands

graceful-restart-helper

graceful-restart

group

Chapter 8. H Commands

hello-interval

http

https

Chapter 9. I Commands

inband-mgmt

inband-mgmt epg

inherit

inherit bgp address-family

inherit bgp dampening

inherit eigrp

inherit ipv4

inherit ipv6

instance

interface

interface ethernet

interface inband-mgmt0

interface mgmt0

interface port-channel

interface vlan

interface vpc

ip

ip address-range

ip address

ip address tenant application

ip address tenant external-l2

ip address tenant external-l3

ip bandwidth

ip bfd

ip dhcp relay address tenant application

ip dhcp relay address tenant external-l2

ip dhcp relay address tenant external-l3

ip distribute-list eigrp

ip dscp

ip hello-interval

ip hold-interval

ip igmp snooping fast-leave

ip igmp snooping last-member-query-interval

ip igmp snooping optimise-multicast-flood

ip igmp snooping policy

ip igmp snooping querier

ip igmp snooping query-interval

ip igmp snooping query-max-response-time

ip igmp snooping startup-query-count

ip igmp snooping startup-query-interval

ip next-hop-self

ip ospf authentication-key

ip ospf authentication

ip ospf bfd

ip ospf cost

ip ospf dead-interval

ip ospf hello-interval

ip ospf inherit

ip ospf mtu-ignore

ip ospf network

ip ospf passive-interface

ip ospf prefix-suppression

ip ospf priority

ip ospf retransmit-interval

ip ospf transmit-delay

ip passive-interface

ip prefix-list

ip prefix-list permit le

ip router eigrp

ip router ospf default

ip shared address consumer

ip shared address provider

ip split-horizon

ip summary-address eigrp

ip throughput-delay

ip ttl

iprange

ipv6

ipv6 address-range

ipv6 address

ipv6 address tenant application

ipv6 address tenant external-l2

ipv6 address tenant external-l3

ipv6 bandwidth

ipv6 bfd

ipv6 dhcp relay address tenant application

ipv6 dhcp relay address tenant external-l2

ipv6 dhcp relay address tenant external-l3

ipv6 distribute-list eigrp

ipv6 hello-interval

ipv6 hold-interval

ipv6 link-local

ipv6 nd hop-limit

ipv6 nd managed-config-flag

ipv6 nd mtu

ipv6 nd ns-interval

ipv6 nd ns-retries

ipv6 nd other-config-flag

ipv6 nd policy

ipv6 nd prefix

ipv6 nd ra-interval

ipv6 nd ra-lifetime

ipv6 nd reachable-time

ipv6 nd retrans-timer

ipv6 nd suppress-ra-mtu

ipv6 nd suppress-ra

ipv6 next-hop-self

ipv6 ospf bfd

ipv6 ospf cost

ipv6 ospf dead-interval

ipv6 ospf hello-interval

ipv6 ospf inherit

ipv6 ospf mtu-ignore

ipv6 ospf network

ipv6 ospf passive-interface

ipv6 ospf prefix-suppression

ipv6 ospf priority

ipv6 ospf retransmit-interval

ipv6 ospf transmit-delay

ipv6 passive-interface

ipv6 router eigrp

ipv6 router ospf default

ipv6 shared address consumer

ipv6 shared address provider

ipv6 split-horizon

ipv6 throughput-delay

isis

isolation

Chapter 10. K Commands

key

Chapter 11. L Commands

l2-unknown-unicast

l3-unknown-multicast

l3out

l4l7-peer

l4l7

l4l7 cluster import-from

l4l7 cluster name

l4l7 graph

label match

label name

lacp fast-select-hot-standby

lacp graceful-convergence

lacp load-defer

lacp max-links

lacp min-links

lacp port-priority

lacp port-priority interface

lacp rate

lacp rate fast normal interface

lacp suspend-individual

last-name

ldap-server attribute

ldap-server basedn

ldap-server filter

ldap-server host

ldap-server retries

ldap-server timeout

leaf-group

leaf-interface-group

leaf-interface-profile

leaf-policy-group

leaf-profile

leaf

legacy

link

lldp

lldp holdtime

lldp reinit

lldp timer

local-as

locality

logfile

logging

logging audit

logging description

logging event

logging fault

logging server-group

logging session

logging severity

lsp-fast-flood

lsp-gen-interval

lsp-mtu

Chapter 12. M Commands

mac-address

match

match arp

match bridge-domain

match community

match icmp

match ip

match ipv6

match prefix-list

match raw

match tcp

match udp

max-lsa

max-validity-period

max concurrent

max running

maximum-paths

maximum-prefix

mcp

mcp action

mcp enable

mcp factor

mcp init-delay

mcp transmit-frequency

member

message-level

message-size

metric

mgmt-epg

microsoft-domain

microsoft

min-rx

min-tx

min

mode

modulus

monitor

monitor access

monitor fabric

monitor tenant

monitor virtual

mtu-ignore

mtu

multi-destination

multi-site-mac-address

multicast-address

multiplier

Chapter 13. N Commands

name-lookup

negotiate

neighbor

network

next-hop-self

ntp

Chapter 14. O Commands

oob-mgmt

oob-mgmt epg

optimize

option

org-name

org-unit-name

Chapter 15. P Commands

passive-interface

passphrase

password

password change-count

password change-during-interval

password change-interval

password history-count

password no-change-interval

password pwd-strength-check

path

peer-dead-interval

periodic-inventory notification

phone-contact

phone

pod

policy-group

policy-map

policy-map type data-plane

policy-map type qos

port

porttrack delay

porttrack minlinks

porttrack state

power

prefix-suppression

preview

priority

priv-type

priv

private-as-control

protocol

pwd-lifetime

Chapter 16. Q Commands

qos parameters

qos preserve

query-cluster-health

query-cluster-statistics

query-cluster-validation

query-profile

query

queue control

queue limit

Chapter 17. R Commands

radius-server host

radius-server retries

radius-server timeout

rbac role

rbac rule

rbac security-domain

realm

recurring

redirect

redistribute

redundancy-mode

region

reload controller

reload switch

remote-as

remote

request-status-count

reset-to-factory

response-incl

response-subtree

retransmit-interval

retries

revision

role

route-map

route-profile

route-reflector

router-id

router bgp

router eigrp

router ospf

rtr-cfg

run-mode

Chapter 18. S Commands

schedule

scheduler

scheduling

scope

scvmm

second-file

security-domain

security

send-community

server

service-policy

service

session-record-flags

set

set burst

set cir

set community

set conform-cos-transmit

set conform-dscp-transmit

set conform

set dampening

set dscp

set exceed-cos-transmit

set exceed-dscp-transmit

set exceed

set excessive-burst

set local-preference

set metric-type

set metric

set mode

set pir

set qos-class

set tag

set target-dscp

set type

set violate-cos-transmit

set violate-dscp-transmit

set violate

set weight

shellinabox

show aaa authentication

show aaa groups

show access-list

show accounting log

show application

show audits

show audits tenant

show audits tenant application

show audits tenant application epg

show audits tenant bridge-domain

show audits tenant bridge-domain detail

show audits tenant interface bridge-domain

show audits tenant interface bridge-domain detail

show audits tenant vrf

show audits tenant vrf detail

show audits tenant vrf external-l3 bgp

show audits tenant vrf external-l3 bgp node

show audits tenant vrf external-l3 eigrp

show audits tenant vrf external-l3 eigrp detail

show audits tenant vrf external-l3 epg

show audits tenant vrf external-l3 epg detail

show audits tenant vrf external-l3 epg name

show audits tenant vrf external-l3 epg name detail

show audits tenant vrf external-l3 interfaces

show audits tenant vrf external-l3 interfaces detail

show audits tenant vrf external-l3 ospf

show audits tenant vrf external-l3 ospf detail

show audits tenant vrf external-l3 static-route

show audits tenant vrf external-l3 static-route detail

show audits tenant vrf external-l3 static-route node

show audits tenant vrf external-l3 static-route node detail

show bridge-domain

show bridge-domain detail

show callhome

show callhome common destination-profile

show callhome common query-profile

show callhome common transport-email

show catalog

show cli command

show cli internal audit

show cli internal transaction

show cli list

show cli manpage

show cli path

show clock

show communication ciphers

show communication http

show communication https

show communication shellinabox

show communication ssh-service

show communication telnet

show communication web-requests

show contract-type

show contract

show controller

show controller detail

show cores

show debug counter

show debug log

show dns-address

show dns-domain

show endpoints

show endpoints leaf interface ethernet

show endpoints leaf interface port-channel

show endpoints vpc

show epg

show epg detail

show events

show events controller

show events controller detail

show events leaf

show events leaf fex

show events leaf fex module

show events leaf interface ethernet

show events leaf interface l3instance

show events leaf interface mgmt

show events leaf interface portchannel

show events leaf interface tunnel

show events leaf inventory chassis

show events leaf inventory fans

show events leaf inventory module

show events leaf inventory module fabricport

show events leaf inventory module leafport

show events leaf inventory powersupply

show events leaf inventory supervisor

show events leaf protocol

show events leaf vpc

show events leaf vrf

show events spine

show events spine interface ethernet

show events spine interface l3instance

show events spine interface mgmt

show events spine interface tunnel

show events spine inventory chassis

show events spine inventory fabric

show events spine inventory fans

show events spine inventory module

show events spine inventory module fabricport

show events spine inventory powersupply

show events spine inventory supervisor

show events spine inventory system

show events spine protocol

show events spine vrf

show events tenant

show events tenant application

show events tenant application epg

show events tenant bridge-domain

show events tenant bridge-domain detail

show events tenant endpoints

show events tenant endpoints leaf interface ethernet

show events tenant endpoints leaf interface port-channel

show events tenant endpoints vpc

show events tenant interface bridge-domain

show events tenant interface bridge-domain detail

show events tenant vrf

show events tenant vrf detail

show events tenant vrf external-l3 bgp

show events tenant vrf external-l3 bgp node

show events tenant vrf external-l3 eigrp

show events tenant vrf external-l3 eigrp detail

show events tenant vrf external-l3 epg

show events tenant vrf external-l3 epg detail

show events tenant vrf external-l3 epg name

show events tenant vrf external-l3 epg name detail

show events tenant vrf external-l3 interfaces

show events tenant vrf external-l3 interfaces detail

show events tenant vrf external-l3 ospf

show events tenant vrf external-l3 ospf detail

show events tenant vrf external-l3 route-map

show events tenant vrf external-l3 route-map detail

show events tenant vrf external-l3 static-route

show events tenant vrf external-l3 static-route detail

show events tenant vrf external-l3 static-route node

show events tenant vrf external-l3 static-route node detail

show external-l2 epg

show external-l2 epg name

show external-l2 epg tenant

show external-l3 bgp

show external-l3 bgp tenant

show external-l3 bgp tenant vrf

show external-l3 bgp tenant vrf node

show external-l3 eigrp

show external-l3 eigrp detail

show external-l3 eigrp node

show external-l3 eigrp node detail

show external-l3 eigrp tenant

show external-l3 eigrp tenant detail

show external-l3 eigrp tenant vrf

show external-l3 eigrp tenant vrf detail

show external-l3 eigrp tenant vrf node

show external-l3 eigrp tenant vrf node detail

show external-l3 epg

show external-l3 epg detail

show external-l3 epg name

show external-l3 epg name detail

show external-l3 epg tenant

show external-l3 epg tenant detail

show external-l3 epg tenant vrf

show external-l3 epg tenant vrf detail

show external-l3 interfaces

show external-l3 interfaces detail

show external-l3 interfaces node

show external-l3 interfaces node detail

show external-l3 interfaces tenant

show external-l3 interfaces tenant detail

show external-l3 interfaces tenant vrf

show external-l3 interfaces tenant vrf detail

show external-l3 interfaces tenant vrf node

show external-l3 interfaces tenant vrf node detail

show external-l3 ospf

show external-l3 ospf detail

show external-l3 ospf node

show external-l3 ospf node detail

show external-l3 ospf tenant

show external-l3 ospf tenant detail

show external-l3 ospf tenant vrf

show external-l3 ospf tenant vrf detail

show external-l3 ospf tenant vrf node

show external-l3 ospf tenant vrf node detail

show external-l3 route-map

show external-l3 route-map detail

show external-l3 route-map name

show external-l3 route-map name detail

show external-l3 route-map tenant

show external-l3 route-map tenant detail

show external-l3 route-map tenant vrf

show external-l3 route-map tenant vrf detail

show external-l3 route-map tenant vrf node

show external-l3 route-map tenant vrf node detail

show external-l3 static-route

show external-l3 static-route detail

show external-l3 static-route node

show external-l3 static-route node detail

show external-l3 static-route tenant

show external-l3 static-route tenant detail

show external-l3 static-route tenant vrf

show external-l3 static-route tenant vrf detail

show external-l3 static-route tenant vrf node

show external-l3 static-route tenant vrf node detail

show fabric-recovery status

show faults

show faults controller

show faults controller detail

show faults l4l7-cluster

show faults l4l7-graph

show faults leaf

show faults leaf fex

show faults leaf fex module

show faults leaf interface ethernet

show faults leaf interface l3instance

show faults leaf interface mgmt

show faults leaf interface portchannel

show faults leaf interface tunnel

show faults leaf inventory chassis

show faults leaf inventory fans

show faults leaf inventory module

show faults leaf inventory module fabricport

show faults leaf inventory module leafport

show faults leaf inventory powersupply

show faults leaf inventory supervisor

show faults leaf protocol

show faults leaf vpc

show faults leaf vrf

show faults microsoft domain

show faults microsoft domain name

show faults microsoft domain name hyperv

show faults microsoft domain name port-group

show faults microsoft domain name scvmm

show faults microsoft domain name vm

show faults microsoft domain name vm name

show faults spine

show faults spine interface ethernet

show faults spine interface l3instance

show faults spine interface mgmt

show faults spine interface tunnel

show faults spine inventory chassis

show faults spine inventory fabric

show faults spine inventory fans

show faults spine inventory module

show faults spine inventory module fabricport

show faults spine inventory powersupply

show faults spine inventory supervisor

show faults spine inventory system

show faults spine protocol

show faults spine vrf

show faults tenant

show faults tenant application

show faults tenant application epg

show faults tenant bridge-domain

show faults tenant bridge-domain detail

show faults tenant interface bridge-domain

show faults tenant interface bridge-domain detail

show faults tenant vrf

show faults tenant vrf detail

show faults tenant vrf external-l3 bgp

show faults tenant vrf external-l3 bgp node

show faults tenant vrf external-l3 eigrp

show faults tenant vrf external-l3 eigrp detail

show faults tenant vrf external-l3 epg

show faults tenant vrf external-l3 epg detail

show faults tenant vrf external-l3 epg name

show faults tenant vrf external-l3 epg name detail

show faults tenant vrf external-l3 interfaces

show faults tenant vrf external-l3 interfaces detail

show faults tenant vrf external-l3 ospf

show faults tenant vrf external-l3 ospf detail

show faults tenant vrf external-l3 static-route

show faults tenant vrf external-l3 static-route detail

show faults tenant vrf external-l3 static-route node

show faults tenant vrf external-l3 static-route node detail

show faults vmware domain

show faults vmware domain name

show faults vmware domain name epg

show faults vmware domain name esx

show faults vmware domain name port-group

show faults vmware domain name vcenter

show faults vmware domain name vm

show faults vmware domain name vm name

show firmware repository

show firmware repository detail

show firmware upgrade status

show firmware upgrade status controller-group

show firmware upgrade status controller-group detail

show firmware upgrade status detail

show firmware upgrade status switch-group

show firmware upgrade status switch-group detail

show health

show health l4l7-cluster

show health l4l7-graph

show health leaf

show health leaf fex

show health leaf fex module

show health leaf interface ethernet

show health leaf interface l3instance

show health leaf interface mgmt

show health leaf interface portchannel

show health leaf interface tunnel

show health leaf inventory chassis

show health leaf inventory fans

show health leaf inventory module

show health leaf inventory module fabricport

show health leaf inventory module leafport

show health leaf inventory powersupply

show health leaf inventory supervisor

show health leaf protocol

show health leaf vpc

show health leaf vrf

show health spine

show health spine interface ethernet

show health spine interface l3instance

show health spine interface mgmt

show health spine interface tunnel

show health spine inventory chassis

show health spine inventory fabric

show health spine inventory fans

show health spine inventory module

show health spine inventory module fabricport

show health spine inventory powersupply

show health spine inventory supervisor

show health spine inventory system

show health spine protocol

show health spine vrf

show health tenant

show health tenant application

show health tenant application epg

show health tenant bridge-domain

show health tenant bridge-domain detail

show health tenant interface bridge-domain

show health tenant interface bridge-domain detail

show health tenant vrf

show health tenant vrf detail

show health tenant vrf external-l3 bgp

show health tenant vrf external-l3 bgp node

show health tenant vrf external-l3 eigrp

show health tenant vrf external-l3 eigrp detail

show health tenant vrf external-l3 epg

show health tenant vrf external-l3 epg detail

show health tenant vrf external-l3 epg name

show health tenant vrf external-l3 epg name detail

show health tenant vrf external-l3 interfaces

show health tenant vrf external-l3 interfaces detail

show health tenant vrf external-l3 ospf

show health tenant vrf external-l3 ospf detail

show health tenant vrf external-l3 static-route

show health tenant vrf external-l3 static-route detail

show health tenant vrf external-l3 static-route node

show health tenant vrf external-l3 static-route node detail

show inband-mgmt

show inband-mgmt controller

show inband-mgmt switch

show interface bridge-domain

show interface bridge-domain detail

show ip interface bridge-domain

show ipv6 interface bridge-domain

show l4l7-cluster

show l4l7-graph

show l4l7-package

show ldap-server

show locator-led

show locator-led status leaf

show microsoft domain

show microsoft domain name

show microsoft domain name hyperv

show microsoft domain name port-group

show microsoft domain name scvmm

show microsoft domain name vm

show microsoft domain name vm name

show microsoft vm

show monitor access

show monitor fabric

show monitor tenant

show monitor virtual

show ntpq

show oob-mgmt

show oob-mgmt controller

show oob-mgmt switch

show policy-map

show policy-map type data-plane

show policy-map type qos

show port-channel leaf

show port-channel map

show port-channel map leaf

show radius-server

show resource

show resource conflict encap-vlan epg

show resource conflict encap-vlan epg node

show role

show running-config

show sessions

show sessions controller

show sessions controller detail

show sessions leaf

show sessions spine

show snapshot active

show snapshot files

show snapshot jobs

show snmp

show snmp clientgroups

show snmp community

show snmp engineid

show snmp hosts

show snmp users

show stats

show stats granularity leaf

show stats granularity leaf fex

show stats granularity leaf fex module

show stats granularity leaf interface ethernet

show stats granularity leaf interface mgmt

show stats granularity leaf interface portchannel

show stats granularity leaf inventory fans

show stats granularity leaf inventory powersupply

show stats granularity leaf inventory supervisor

show stats granularity spine

show stats granularity spine interface ethernet

show stats granularity spine interface mgmt

show stats granularity spine inventory chassis

show stats granularity spine inventory fabric

show stats granularity spine inventory fans

show stats granularity spine inventory module

show stats granularity spine inventory powersupply

show stats granularity spine inventory supervisor

show stats granularity spine inventory system

show stats granularity tenant

show stats granularity tenant application

show stats granularity tenant application epg

show switch

show switch detail

show tacacs-server

show techsupport all

show techsupport controllers

show techsupport host

show techsupport switch

show tenant

show tenant access-list

show tenant application

show tenant application endpoints

show tenant application endpoints leaf interface ethernet

show tenant application endpoints leaf interface port-channel

show tenant application endpoints vpc

show tenant application epg

show tenant application epg detail

show tenant application epg endpoints

show tenant application epg endpoints leaf interface ethernet

show tenant application epg endpoints leaf interface port-channel

show tenant application epg endpoints vpc

show tenant bridge-domain

show tenant bridge-domain detail

show tenant contract-type

show tenant contract

show tenant detail

show tenant endpoints

show tenant endpoints leaf interface ethernet

show tenant endpoints leaf interface port-channel

show tenant endpoints vpc

show tenant epg

show tenant epg detail

show tenant external-l2 epg

show tenant interface bridge-domain

show tenant interface bridge-domain detail

show tenant ip interface bridge-domain

show tenant ipv6 interface bridge-domain

show tenant policy-map

show tenant policy-map type data-plane

show tenant policy-map type qos

show tenant vrf

show tenant vrf detail

show tenant vrf external-l3 bgp

show tenant vrf external-l3 bgp node

show tenant vrf external-l3 eigrp

show tenant vrf external-l3 eigrp detail

show tenant vrf external-l3 epg

show tenant vrf external-l3 epg detail

show tenant vrf external-l3 epg name

show tenant vrf external-l3 epg name detail

show tenant vrf external-l3 interfaces

show tenant vrf external-l3 interfaces detail

show tenant vrf external-l3 ospf

show tenant vrf external-l3 ospf detail

show tenant vrf external-l3 route-map

show tenant vrf external-l3 route-map detail

show tenant vrf external-l3 static-route

show tenant vrf external-l3 static-route detail

show tenant vrf external-l3 static-route node

show tenant vrf external-l3 static-route node detail

show troubleshoot epext session

show troubleshoot epext session atomiccounter

show troubleshoot epext session audit

show troubleshoot epext session contracts

show troubleshoot epext session deployments

show troubleshoot epext session events

show troubleshoot epext session faults

show troubleshoot epext session monitor

show troubleshoot epext session reports

show troubleshoot epext session statistics

show troubleshoot epext session topology

show troubleshoot epext session traceroute

show troubleshoot epext sessions

show troubleshoot eptoep session

show troubleshoot eptoep session atomiccounter

show troubleshoot eptoep session audit

show troubleshoot eptoep session contracts

show troubleshoot eptoep session deployments

show troubleshoot eptoep session events

show troubleshoot eptoep session faults

show troubleshoot eptoep session monitor

show troubleshoot eptoep session reports

show troubleshoot eptoep session statistics

show troubleshoot eptoep session topology

show troubleshoot eptoep session traceroute

show troubleshoot eptoep sessions

show username

show username detail

show version

show vlan-domain

show vmware domain

show vmware domain name

show vmware domain name epg

show vmware domain name esx

show vmware domain name port-group

show vmware domain name vcenter

show vmware domain name vm

show vmware domain name vm name

show vmware vm

show vpc

show vpc map leaf

show vrf

show vrf detail

shut

shutdown

site-id

slow-timer

snapshot download

snapshot export

snapshot import

snapshot rollback

snapshot upload

snmp-server clientgroup

snmp-server community

snmp-server contact

snmp-server host

snmp-server location

snmp-server protocol

snmp-server user

source

source application

source interface ethernet

source interface port-channel

source interface vpc

spanning-tree

spanning-tree bpdu-filter

spanning-tree bpdu-guard

speed

spf-interval

ssh-key

ssh-service

ssl-protocols

ssl-validation-level

state

static-endpoint

static-tep

statistics

storm-control level

storm-control pps

street-address

subject

summary-address

switch-group

switch

switching

switchport

switchport access vlan tenant application

switchport access vlan tenant external-svi

switchport trunk allowed vlan inband-mgmt

switchport trunk allowed vlan tenant application

switchport trunk allowed vlan tenant external-l2

switchport trunk allowed vlan tenant external-svi

switchport trunk allowed vlan tenant legacy-forwarding

switchport trunk native vlan tenant application

switchport trunk native vlan tenant external-svi

switchport vlan

syslog

system cluster-size

system controller-id

system dynamic-load-balance

system fabric-security-mode

system jumbomtu

system switch-id

Chapter 19. T Commands

tacacs-server host

tacacs-server retries

tacacs-server timeout

tag

target

telnet

template bfd

template bgp address-family

template bgp timers

template community-list expanded

template community-list standard

template dhcp option

template dhcp relay

template eigrp interface-policy

template eigrp vrf-policy

template endpoint retention policy

template extcommunity-list expanded

template extcommunity-list standard

template ip igmp snooping policy

template ipv6 nd policy

template ipv6 nd prefix

template leaf-policy-group

template ospf interface-policy

template ospf vrf-policy

template policy-group

template port-channel

template route-profile

template route tag

tenant

terminal

time

time start daily

time start weekly

timeout

timers

timers lsa-arrival

timers lsa-group-pacing

timers throttle lsa

timers throttle spf

tp

transmit-delay

transport email from

transport email mail-server

transport email reply-to

trigger fabric-recovery

trigger shutdown

trigger snapshot download

trigger snapshot export

trigger snapshot import

trigger snapshot rollback

trigger snapshot upload

trigger techsupport all

trigger techsupport controllers

trigger techsupport host

trigger techsupport local

trigger techsupport switch

trigger troubleshoot epext session report

trigger troubleshoot eptoep session report

trigger vmware

troubleshoot epext session atomiccounter

troubleshoot epext session description

troubleshoot epext session latestminutes

troubleshoot epext session monitor destination apic

troubleshoot epext session monitor destination prefdestgroup

troubleshoot epext session monitor destination tenant

troubleshoot epext session scheduler

troubleshoot epext session srcextip destip tenant application

troubleshoot epext session srcextip destip tenant vrf

troubleshoot epext session srcip tenant application epg destextip

troubleshoot epext session srcip tenant vrf destextip

troubleshoot epext session starttime

troubleshoot epext session traceroute

troubleshoot epext session traceroute protocol icmp

troubleshoot epext session traceroute protocol tcp

troubleshoot epext session traceroute protocol udp

troubleshoot eptoep session atomiccounter

troubleshoot eptoep session description

troubleshoot eptoep session latestminutes

troubleshoot eptoep session monitor destination apic

troubleshoot eptoep session monitor destination prefdestgroup

troubleshoot eptoep session monitor destination tenant

troubleshoot eptoep session scheduler

troubleshoot eptoep session srcip tenant application epg destip tenant application

troubleshoot eptoep session srcip tenant application epg destip tenant vrf

troubleshoot eptoep session srcip tenant vrf destip tenant application

troubleshoot eptoep session srcip tenant vrf destip tenant vrf

troubleshoot eptoep session srcmac tenant application epg destmac tenant application

troubleshoot eptoep session srcmac tenant application epg destmac tenant vrf

troubleshoot eptoep session srcmac tenant vrf destmac tenant application

troubleshoot eptoep session srcmac tenant vrf destmac tenant vrf

troubleshoot eptoep session starttime

troubleshoot eptoep session traceroute

troubleshoot eptoep session traceroute protocol icmp

troubleshoot eptoep session traceroute protocol tcp

troubleshoot eptoep session traceroute protocol udp

trusted-key

Chapter 20. U Commands

ui-idle-timeout-seconds

unicast

update-source ethernet

update-source loopback

update-source vlan

use-keyring

use-vrf

user

username

Chapter 21. V Commands

vcenter

vlan-domain

vlan-pool

vlan

vmware-domain

vnic

vpc context

vpc domain consecutive

vpc domain explicit

vpc domain reciprocal

vrf

vshield

vxlan

vxlan multicast-pool

vxlan pool

Chapter 22. W Commands

webtoken-timeout-seconds

weight

where

where detail

winservers

Chapter 23. Z Commands

zone

zones

Preface

Audience

Document Conventions

Related Documentation

Documentation Feedback

GNU Copyright Statement

Please send general FSF & GNU inquiries to gnu@gnu.org. There are also other ways to contact the FSF. Please send broken links and other corrections or suggestions to bug-bash@gnu.org. Please see the Translations README for information on coordinating and submitting translations of this article.

Copyright © 2007, 2009, 2011 Free Software Foundation, Inc. Verbatim copying and distribution of this entire article are permitted worldwide, without royalty, in any medium, provided this notice, and the copyright notice, are preserved. Updated: Date: 2011/06/28 02:44:32

Chapter 1. A Commands

- aaa authentication login console

- aaa authentication login default

- aaa authentication login domain

- aaa banner

- aaa group server ldap

- aaa group server radius

- aaa group server tacacsplus

- aaa scvmm-certificate

- aaa user default-role

- absolute

- access-group

- access-list

- account-status

- action

- address-family

- address

- admin-state-enable

- admin

- advertise-subnet

- aggregate-address

- allow-origin

- allow-self-as

- allow-writes

- allowed-self-as-count

- application

- area default-cost

- area l3out

- area loopback

- area nssa

- area nssa default-information-originate

- area nssa no-redistribute

- area nssa translate

- area range

- area route-map

- area stub

- arp flooding

- asn

- attribute

- attribute match custom

- attribute match datacenter

- attribute match domain

- attribute match guest-os

- attribute match hypervisor-id

- attribute match ip

- attribute match mac

- attribute match vm-id

- attribute match vm-name

- attribute match vnic

- authenticate

- authentication-key

- auto-cost

- autonomous-system

aaa authentication login console

aaa authentication login console

Description: Configure console methods

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# aaa authentication login console

aaa authentication login default

aaa authentication login default

Description: Configure default methods

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# aaa authentication login default

aaa authentication login domain

aaa authentication login domain <WORD>

Description: Configure domain methods

Syntax:

WORD

Login domain name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# aaa authentication login domain <WORD>

aaa banner

aaa banner <LINE>

Description: CLI informational banner to be displayed before user login (wrap with single quotes)

Syntax:

LINE

CLI informational banner to be displayed before user login (wrap with single quotes) (Max Size None)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# aaa banner <LINE>

aaa group server ldap

aaa group server ldap <WORD>

Description: LDAP server group name.

Syntax:

WORD

LDAP server group name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# aaa group server ldap <WORD>

aaa group server radius

aaa group server radius <WORD>

Description: RADIUS server group name.

Syntax:

WORD

RADIUS server group name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# aaa group server radius <WORD>

aaa group server tacacsplus

aaa group server tacacsplus <WORD>

Description: TACACS+ server group name.

Syntax:

WORD

TACACS+ server group name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# aaa group server tacacsplus <WORD>

aaa scvmm-certificate

aaa scvmm-certificate <WORD>

Description: AAACertRule

Syntax:

WORD

Certificate name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# aaa scvmm-certificate <WORD>

aaa user default-role

aaa user default-role <default-role-policy>

Description: Default role assigned by aaa-admin for remote authentication

Syntax:

<default-role-policy>

<default-role-policy>

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# aaa user default-role <default-role-policy>

absolute

absolute window <WORD>

Description: Absolute window configuration mode

Syntax:

window

Configure scheduler window

WORD

Window name (Max size 31)

Command Mode: scheduler : Scheduler configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# scheduler fabric|controller schedule <WORD>
(config-scheduler)# absolute window <WORD>

access-group

access-group <WORD> <WORD>

Description: Apply an access-list on this subject

Syntax:

WORD

Name of the access-list to apply (Max Size 64)

WORD

Directions

Command Mode: subject : Configuration a subject on the contract

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# subject <WORD>
(config-tenant-contract-subj)# access-group <WORD> <WORD>

access-list

access-list <WORD>

Description: Create access-list

Syntax:

WORD

Access-list Name (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# access-list <WORD>

account-status

account-status <WORD>

Description: Set The status of the locally-authenticated user account.

Syntax:

WORD

status of the locally-authenticated user account

Command Mode: username : Create a locally-authenticated user account

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# account-status <WORD>

action

action merge|replace

Description: Snapshot import action merge|replace

Syntax:

merge

Merge with existing configuration

replace

Replace existing configuration

Command Mode: snapshot import : Configuration import setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot import <WORD>
(config-import)# action merge|replace

address-family

address-family ipv4|ipv6 unicast

Description: EIGRP Policy Address Family

Syntax:

ipv4

Address Family IPv4

ipv6

Address Family IPv6

unicast

Unicast

Command Mode: vrf : Configure VRF information

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router eigrp default
(config-eigrp)# vrf member tenant <WORD> vrf <WORD>
(config-eigrp-vrf)# address-family ipv4|ipv6 unicast

address-family ipv4|ipv6 unicast

Description: Configure an address-family for peer

Syntax:

ipv4

Configure IPv4 address-family

ipv6

Configure IPv6 address-family

unicast

Configure Unicast sub-address-family

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# address-family ipv4|ipv6 unicast

address-family ipv4|ipv6 unicast

Description: Configure an address-family

Syntax:

ipv4

Configure IPv4 address-family

ipv6

Configure IPv6 address-family

unicast

Configure unicast address-family

Command Mode: vrf : Virtual Router Context

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# address-family ipv4|ipv6 unicast

address

address <A.B.C.D> [preferred]

Description: Configure the ip address for dns servers

Syntax:

A.B.C.D

IP address in format i.i.i.i

preferred

(Optional) Configure the address to be preferred

Command Mode: dns : Configure default dns policy

Command Path:

# configure [['terminal', 't']]
(config)# dns
(config-dns)# address <A.B.C.D> [preferred]

admin-state-enable

admin-state-enable

Description: Enable the state of the SSH communication service

Command Mode: ssh-service : SSH communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# ssh-service
(config-ssh-service)# admin-state-enable

admin-state-enable

Description: Enable the state of the TELNET communication service

Command Mode: telnet : TELNET communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# telnet
(config-telnet)# admin-state-enable

admin-state-enable

Description: Enable the state of the shellinabox communication service

Command Mode: shellinabox : SHELLINABOX communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# shellinabox
(config-shellinabox)# admin-state-enable

admin-state-enable

Description: Enable the state of the HTTP communication service

Command Mode: http : HTTP communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# http
(config-http)# admin-state-enable

admin-state-enable

Description: Enable the state of the HTTPS communication service

Command Mode: https : HTTPS communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# https
(config-https)# admin-state-enable

admin

admin enable

Description: Set admin state of syslog group

Syntax:

enable

Enable

Command Mode: logging : Logging server group configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# logging server-group <WORD>
(config-logging)# admin enable

advertise-subnet

advertise-subnet

Description: Set OSPF Interface Policy Controls

Command Mode: template ospf interface-policy : Configure OSPF Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf interface-policy <WORD> tenant <WORD>
(config-interface-policy)# advertise-subnet

aggregate-address

aggregate-address <IP-PREFIX/LEN> [as-set]

Description: Route summarization

Syntax:

IP-PREFIX/LEN

Aggregate IPv4 address and mask length

as-set

(Optional) Autonomous system set path information and community information

Command Mode: vrf : Virtual Router Context

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# aggregate-address <IP-PREFIX/LEN> [as-set]

allow-origin

allow-origin <WORD>

Description: The URL to return in the Access-Control-Allow-Origin HTTP header

Syntax:

WORD

The URL to return in the Access-Control-Allow-Origin HTTP header (Max Size 256)

Command Mode: http : HTTP communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# http
(config-http)# allow-origin <WORD>

allow-self-as

allow-self-as

Description: Accept as-path with my AS present in it

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# allow-self-as

allow-writes

allow-writes

Description: Allow writes for the RBAC rule

Command Mode: rbac rule : Create RBAC rule, security domain users can read subtree starting at specific object

Command Path:

# configure [['terminal', 't']]
(config)# rbac rule <DN> <WORD>
(config-rule)# allow-writes

allowed-self-as-count

allowed-self-as-count <NUMBER>

Description: The number of occurrences of a local access service network

Syntax:

<1-10>

Number of occurrences of AS number, default is 3. Number range from=1 to=10

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# allowed-self-as-count <NUMBER>

application

application <WORD>

Description: application configuration mode

Syntax:

WORD

Application name (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>

area default-cost

area <A.B.C.D|NUMBER> default-cost <0-16777215>

Description: Set OSPF default area cost

Syntax:

<A.B.C.D|NUMBER>

OSPF area ID

<0-16777215>

Cost value

Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router ospf default
(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-ospf-vrf)# area <A.B.C.D|NUMBER> default-cost <0-16777215>

area l3out

area <A.B.C.D|NUMBER> l3out <l3out name>

Description: Enable OSPF in the l3Out

Syntax:

<A.B.C.D|NUMBER>

OSPF area ID

<l3out name>

Configure ASN on an API configured L3Out

Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router ospf default
(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-ospf-vrf)# area <A.B.C.D|NUMBER> l3out <l3out name>

area loopback

area <A.B.C.D|NUMBER> loopback <Loopback Ip Address>

Description: Configure OSPF on Loopback

Syntax:

<A.B.C.D|NUMBER>

OSPF area ID

<Loopback Ip Address>

Loopback Ip

Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router ospf default
(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-ospf-vrf)# area <A.B.C.D|NUMBER> loopback <Loopback Ip Address>

area nssa

area <A.B.C.D|NUMBER> nssa

Description: Configure area as nssa

Syntax:

<A.B.C.D|NUMBER>

OSPF area ID

Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router ospf default
(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-ospf-vrf)# area <A.B.C.D|NUMBER> nssa

area nssa default-information-originate

area <A.B.C.D|NUMBER> nssa default-information-originate [no-redistribute]

Description: Originate a default route

Syntax:

<A.B.C.D|NUMBER>

OSPF area ID

no-redistribute

(Optional) No Redistribute area option

Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router ospf default
(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-ospf-vrf)# area <A.B.C.D|NUMBER> nssa default-information-originate [no-redistribute]

area nssa no-redistribute

area <A.B.C.D|NUMBER> nssa no-redistribute [default-information-originate]

Description: Configure area as no-redistribute

Syntax:

<A.B.C.D|NUMBER>

OSPF area ID

default-information-originate

(Optional) Originate a default route

Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router ospf default
(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-ospf-vrf)# area <A.B.C.D|NUMBER> nssa no-redistribute [default-information-originate]

area nssa translate

area <A.B.C.D|NUMBER> nssa translate type7 suppress-fa

Description: Translate LSAs

Syntax:

<A.B.C.D|NUMBER>

OSPF area ID

type7

From Type 7 to Type 5

suppress-fa

Suppress forwarding address in translated LSAs

Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router ospf default
(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-ospf-vrf)# area <A.B.C.D|NUMBER> nssa translate type7 suppress-fa

area range

area <A.B.C.D|NUMBER> range <IP-PREFIX/LENGTH> [cost <cost>]

Description: range

Syntax:

<A.B.C.D|NUMBER>

OSPF area ID

IP-PREFIX/LENGTH

Summarized IP

cost

(Optional) Route cost

Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router ospf default
(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-ospf-vrf)# area <A.B.C.D|NUMBER> range <IP-PREFIX/LENGTH> [cost <cost>]

area route-map

area <A.B.C.D|NUMBER> route-map <WORD> out

Description: Set Route Map

Syntax:

<A.B.C.D|NUMBER>

OSPF area ID

WORD

Route Map Name (Max Size 63)

out

Apply policy to outgoing routes

Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router ospf default
(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-ospf-vrf)# area <A.B.C.D|NUMBER> route-map <WORD> out

area stub

area <A.B.C.D|NUMBER> stub

Description: Configure area as a stub

Syntax:

<A.B.C.D|NUMBER>

OSPF area ID

Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router ospf default
(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-ospf-vrf)# area <A.B.C.D|NUMBER> stub

arp flooding

arp flooding

Description: Enable ARP flooding

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# arp flooding

asn

asn <NUMBER>

Description: Configure BGP Autonomous System number

Syntax:

<1-4294967295>

Number that uniquely identifies an autonomous system. Number range from=1 to=4294967295

Command Mode: bgp : Border Gateway Protocol (BGP)

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# bgp fabric
(config-pod-bgp)# asn <NUMBER>

attribute

attribute <WORD>

Description: An LDAP endpoint attribute to be used as the CiscoAVPair

Syntax:

<WORD>

LDAP endpoint attribute (Max Size 63)

Command Mode: ldap-server host : LDAP server DNS name or IP address

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# attribute <WORD>

attribute match custom

attribute <WORD> match custom <WORD> <arg> <WORD>

Description: Configure a Custom attribute

Syntax:

WORD

uSeg attribute name

match

Match criteria

WORD

custom label name

arg

WORD

string to be matched

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# attribute <WORD> match custom <WORD> <> <WORD>

attribute match datacenter

attribute <WORD> match datacenter <arg> <WORD>

Description: Configure a Datacenter name attribute

Syntax:

WORD

uSeg attribute name

match

Match criteria

arg

WORD

Value

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# attribute <WORD> match datacenter <> <WORD>

attribute match domain

attribute <WORD> match domain <arg> <WORD>

Description: Configure a Domain name attribute

Syntax:

WORD

uSeg attribute name

match

Match criteria

arg

WORD

Value

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# attribute <WORD> match domain <> <WORD>

attribute match guest-os

attribute <WORD> match guest-os <arg> <WORD>

Description: Configure a Guest-OS attribute

Syntax:

WORD

uSeg attribute name

match

Match criteria

arg

WORD

Value

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# attribute <WORD> match guest-os <> <WORD>

attribute match hypervisor-id

attribute <WORD> match hypervisor-id <arg> <WORD>

Description: Configure a Hypervisor ID attribute

Syntax:

WORD

uSeg attribute name

match

Match criteria

arg

WORD

Value

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# attribute <WORD> match hypervisor-id <> <WORD>

attribute match ip

attribute <WORD> match ip <ip-addr/mask>

Description: Configure a IP address attribute

Syntax:

WORD

uSeg attribute name

match

Match criteria

<ip-addr/mask>

Full IP Address and mask

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# attribute <WORD> match ip <ip-addr/mask>

attribute match mac

attribute <WORD> match mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE

Description: Configure a MAC address attribute

Syntax:

WORD

uSeg attribute name

match

Match criteria

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# attribute <WORD> match mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE

attribute match vm-id

attribute <WORD> match vm-id <arg> <WORD>

Description: Configure a VM identifier attribute

Syntax:

WORD

uSeg attribute name

match

Match criteria

arg

WORD

Value

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# attribute <WORD> match vm-id <> <WORD>

attribute match vm-name

attribute <WORD> match vm-name <arg> <WORD>

Description: Configure a VM name attribute

Syntax:

WORD

uSeg attribute name

match

Match criteria

arg

WORD

Value

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# attribute <WORD> match vm-name <> <WORD>

attribute match vnic

attribute <WORD> match vnic <arg> <WORD>

Description: Configure a Vnic name attribute

Syntax:

WORD

uSeg attribute name

match

Match criteria

arg

WORD

Value

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# attribute <WORD> match vnic <> <WORD>

authenticate

authenticate

Description: Configure authentication for the default ntp policy

Command Mode: ntp : Configure the default ntp policy

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# ntp
(config-ntp)# authenticate

authentication-key

authentication-key <id> [md5 <md5>]

Description: Configure ntp authentication keys for the default ntp policy

Syntax:

id

Id for the authentication key. Number range from=1 to=65535

md5

(Optional) Configure the authentication key (Max Size 510)

Command Mode: ntp : Configure the default ntp policy

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# ntp
(config-ntp)# authentication-key <id> [md5 <md5>]

auto-cost

auto-cost reference-bandwidth <NUMBER>

Description: Set OSPF Policy Bandwidth Reference

Syntax:

reference-bandwidth

OSPF Policy Bandwidth Reference

<1-4000000>

Bandwidth Reference Value in Mbps. Number range from=1 to=4000000

Command Mode: template ospf vrf-policy : Configure Router OSPF Timer Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf vrf-policy <WORD> tenant <WORD>
(config-vrf-policy)# auto-cost reference-bandwidth <NUMBER>

autonomous-system

autonomous-system <NUMBER> [l3out <l3out>]

Description: Autonomous System Configuration for EIGRP

Syntax:

<1-65535>

The autonomous system number. Number range from=1 to=65535

l3out

(Optional) Configure ASN on an API configured L3Out

Command Mode: vrf : Configure VRF information

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router eigrp default
(config-eigrp)# vrf member tenant <WORD> vrf <WORD>
(config-eigrp-vrf)# autonomous-system <NUMBER> [l3out <l3out>]

Chapter 2. B Commands

- bandwidth

- basedn

- bash

- bfd

- bfd ip ipv6 authentication

- bfd ip ipv6 inherit

- bfd ip ipv6 tenant

- bgp

- binddn

- bpdu-filter

- bridge-domain

bandwidth

bandwidth <NUMBER>

Description: Set the desired bandwidth to police to

Syntax:

<0-100>

Bandwidth percentage guaranteed as %. Number range from=0 to=100

Command Mode: qos parameters : Configure the global QOS policies

Command Path:

# configure [['terminal', 't']]
(config)# qos parameters level1|level2|level3
(config-qos)# bandwidth <NUMBER>

basedn

basedn <WORD>

Description: The LDAP base DN for user lookup in the LDAP directory tree

Syntax:

<WORD>

user lookup in LDAP directory tree (Max Size 127)

Command Mode: ldap-server host : LDAP server DNS name or IP address

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# basedn <WORD>

bash

bash

Description: bash shell for unix commands

Command Mode: exec : Exec Mode

Command Path:

# bash

bfd

bfd enable

Description: Enable Bidirectional Forwarding Detection

Syntax:

enable

Enable BFD

Command Mode: template ospf interface-policy : Configure OSPF Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf interface-policy <WORD> tenant <WORD>
(config-interface-policy)# bfd enable

bfd enable

Description: Enable Bidirectional Forwarding Detection

Syntax:

enable

Enable BFD

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# bfd enable

bfd ip ipv6 authentication

bfd ip|ipv6 authentication keyed-sha1 keyid <NUMBER> key <WORD>

Description: Configure BFD authentication

Syntax:

ip

IPv4

ipv6

IPv6

keyed-sha1

Configure Keyed SHA1 authentication

keyid

Configure authentication key ID

<keyid>

Authentication key ID. Number range from=1 to=255

key

Configure shared authentication key

WORD

Shared authentication key (Max Size 20)

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# bfd ip|ipv6 authentication keyed-sha1 keyid <NUMBER> key <WORD>

bfd ip|ipv6 authentication keyed-sha1 keyid <NUMBER> key <WORD>

Description: Configure BFD authentication

Syntax:

ip

IPv4

ipv6

IPv6

keyed-sha1

Configure Keyed SHA1 authentication

keyid

Configure authentication key ID

<keyid>

Authentication key ID. Number range from=1 to=255

key

Configure shared authentication key

WORD

Shared authentication key (Max Size 20)

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# bfd ip|ipv6 authentication keyed-sha1 keyid <NUMBER> key <WORD>

bfd ip ipv6 inherit

bfd ip|ipv6 inherit interface-policy <WORD>

Description: Inherit BFD interface template policy

Syntax:

ip

IPv4

ipv6

IPv6

interface-policy

Associate the interface with a BFD interface policy

WORD

Policy name

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# bfd ip|ipv6 inherit interface-policy <WORD>

bfd ip|ipv6 inherit interface-policy <WORD>

Description: Inherit BFD interface template policy

Syntax:

ip

IPv4

ipv6

IPv6

interface-policy

Associate the interface with a BFD interface policy

WORD

Policy name

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# bfd ip|ipv6 inherit interface-policy <WORD>

bfd ip ipv6 tenant

bfd ip|ipv6 tenant mode

Description: Enable BFD Tenant Mode

Syntax:

ip

IPv4

ipv6

IPv6

mode

Mode

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# bfd ip|ipv6 tenant mode

bfd ip|ipv6 tenant mode

Description: Enable BFD Tenant Mode

Syntax:

ip

IPv4

ipv6

IPv6

mode

Mode

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# bfd ip|ipv6 tenant mode

bgp

bgp fabric

Description: Border Gateway Protocol (BGP)

Syntax:

fabric

Fabric BGP configuration

Command Mode: pod : Pod configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# bgp fabric

binddn

binddn <WORD>

Description: The LDAP bind DN for user lookup in the LDAP directory tree

Syntax:

<WORD>

user lookup in LDAP directory tree (Max Size 127)

Command Mode: ldap-server host : LDAP server DNS name or IP address

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# binddn <WORD>

bpdu-filter

bpdu-filter

Description: Enable BPDU filter for extended chassis ports

Command Mode: spanning-tree : STP MST configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# spanning-tree mst configuration
(config-stp)# bpdu-filter

bridge-domain

bridge-domain <WORD>

Description: Configuration for bridge-domain

Syntax:

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>

bridge-domain member <WORD>

Description: Bind the EPG to a bridge-domain

Syntax:

member

Bind the EPG to a bridge-domain

WORD

bridge-domain to associate (Max Size 64)

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# bridge-domain member <WORD>

bridge-domain <WORD>

Description: Bind the EPG to a bridge-domain

Syntax:

WORD

bridge domain associated with epg suggestion use "inb"

Command Mode: inband-mgmt : Enter Inside In-band management mode to modify inband properties or create new inband

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# inband-mgmt epg <WORD>
(config-inb-epg)# bridge-domain <WORD>

bridge-domain member <WORD>

Description: Bind the EPG to a bridge-domain

Syntax:

member

Bind the EPG to a bridge-domain

WORD

bridge-domain to associate (Max Size 64)

Command Mode: external-l2 : L2 external EPG creation/configuration

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l2 epg <WORD>
(config-tenant-l2ext-epg)# bridge-domain member <WORD>

bridge-domain tenant <tenant> name <name>

Description: Configure Bridge Domain For a L4-L7 Graph Connector.

Syntax:

tenant

Tenant in which the bridge domain is available

<tenant>

Tenant in which the bridge domain is available

name

Bridge domain name

<name>

Name of bd

Command Mode: connector : Configure Connector for a Service Node

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 graph <WORD> [contract <contract-option>]
(config-graph)# service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode <Available Modes>]
(config-service)# connector <WORD> [cluster-interface <WORD>]
(config-connector)# bridge-domain tenant <tenant> name <name>

Chapter 3. C Commands

- callhome

- catalog-version

- cdp

- cert-chain

- cert

- certificate

- channel-group

- channel-mode

- ciphers

- clear-encryption-key

- clear-pwd-history

- clear endpoints

- clear snapshot file

- clear snapshot job

- clear techsupport controllers

- clear techsupport switch

- clear troubleshoot epext session report

- clear troubleshoot eptoep session report

- clock display-format

- clock show-offset

- clock timezone

- cluster-device

- cluster-device query-device-health

- cluster-device query-device-statistics

- cluster-device query-device-validation

- cluster-interface

- comm-policy

- configure-avs

- configure-dvs

- configure

- connection intra service

- connection terminal

- connector

- console

- contract-id

- contract

- contract consumer

- contract deny

- contract enforce

- contract provider

- controller-group

- controller

- cost

- country

- crypto aes

- crypto ca

- crypto keyring

- crypto webtoken

- csr

- customer-id

callhome

callhome common

Description: Callhome common policy configuration mode

Syntax:

common

Callhome common policy configuration mode

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# callhome common

catalog-version

catalog-version <version>

Description: Change catalog version

Syntax:

<version>

firmware version

Command Mode: firmware : Firmware upgrade configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# catalog-version <version>

cdp

cdp enable|default

Description: Configure CDP parameters on DVS uplink ports

Syntax:

enable

Enable CDP

default

Remove CDP override policy

Command Mode: configure-dvs : Configure a VMware Domain as DVS type

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-dvs
(config-vmware-dvs)# cdp enable|default

cdp enable|default

Description: Configure CDP parameters on AVS uplink ports

Syntax:

enable

Enable CDP

default

Remove CDP override policy

Command Mode: configure-avs : Configure a VMware Domain as AVS (N1K) type

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-avs
(config-vmware-avs)# cdp enable|default

cdp enable

Description: Configure CDP interface parameters

Syntax:

enable

Configure CDP parameters

Command Mode: template policy-group : Configure Policy Group Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# cdp enable

cdp enable

Description: Configure CDP interface parameters

Syntax:

enable

Configure CDP parameters

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# cdp enable

cdp enable

Description: Configure CDP interface parameters

Syntax:

enable

Configure CDP parameters

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# cdp enable

cdp enable

Description: Configure CDP interface parameters

Syntax:

enable

Configure CDP parameters

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# cdp enable

cdp enable

Description: Configure CDP interface parameters

Syntax:

enable

Configure CDP parameters

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# cdp enable

cert-chain

cert-chain <WORD>

Description: Set The PEM-encoded chain of trust from the trustpoint to a trusted root authority.

Syntax:

<WORD>

The PEM-encoded chain of trust from the trustpoint to a trusted root authority

Command Mode: crypto ca : Configure certificate authority related information

Command Path:

# configure [['terminal', 't']]
(config)# crypto ca <WORD>
(config-ca)# cert-chain <WORD>

cert

cert <CERTIFICATE>

Description: Provide a certificate, that contains public key and signed information.

Syntax:

<CERTIFICATE>

Provide a certificate in quotes, that contains public key and signed information

Command Mode: crypto keyring : A keyring mode to create and hold an SSL certificate

Command Path:

# configure [['terminal', 't']]
(config)# crypto keyring <WORD>
(config-keyring)# cert <CERTIFICATE>

certificate

certificate <WORD>

Description: Create AAA user certificate in X.509 format.

Syntax:

WORD

Name for the user certificate

Command Mode: username : Create a locally-authenticated user account

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# certificate <WORD>

channel-group

channel-group <WORD> [vpc]

Description: Create Port Channel

Syntax:

WORD

Port-Channel/VPC Name (Max Size 64)

vpc

(Optional) Configure channel-group as VPC

Command Mode: leaf-interface-group : Configure Leaf Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>
(config-leaf-if-group)# channel-group <WORD> [vpc]

channel-group <WORD> [vpc]

Description: Configure Port Channel on Fex

Syntax:

WORD

Port-Channel/VPC Name (Max Size 64)

vpc

(Optional) Create the channel-group as a VPC

Command Mode: fex-interface-group : Configure Fex Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# fex-profile <WORD>
(config-fex-profile)# fex-interface-group <WORD>
(config-fex-if-group)# channel-group <WORD> [vpc]

channel-group <WORD> [vpc]

Description: Associate a Channel Group to this Interface

Syntax:

WORD

Port-Channel/VPC Name (Max Size 64)

vpc

(Optional) Create the channel-group as a VPC

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# channel-group <WORD> [vpc]

channel-mode

channel-mode on|active|passive|mac-pinning

Description: Configure LACP mode override on DVS uplink ports

Syntax:

on

Set channeling mode to ON (static)

active

Set channeling mode to ACTIVE

passive

Set channeling mode to PASSIVE

mac-pinning

Set channeling mode to MAC-PINNING

Command Mode: configure-dvs : Configure a VMware Domain as DVS type

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-dvs
(config-vmware-dvs)# channel-mode on|active|passive|mac-pinning

channel-mode on|active|passive|mac-pinning

Description: Configure LACP mode override on AVS uplink ports

Syntax:

on

Set channeling mode to ON (static)

active

Set channeling mode to ACTIVE

passive

Set channeling mode to PASSIVE

mac-pinning

Set channeling mode to MAC-PINNING

Command Mode: configure-avs : Configure a VMware Domain as AVS (N1K) type

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-avs
(config-vmware-avs)# channel-mode on|active|passive|mac-pinning

channel-mode on|active|passive|mac-pinning

Description: Configure channeling mode

Syntax:

on

Set channeling mode to ON (static)

active

Set channeling mode to ACTIVE

passive

Set channeling mode to PASSIVE

mac-pinning

Set channeling mode to MAC-PINNING

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# channel-mode on|active|passive|mac-pinning

channel-mode on|active|passive|mac-pinning

Description: Configure channeling mode

Syntax:

on

Set channeling mode to ON (static)

active

Set channeling mode to ACTIVE

passive

Set channeling mode to PASSIVE

mac-pinning

Set channeling mode to MAC-PINNING

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# channel-mode on|active|passive|mac-pinning

channel-mode on|active|passive|mac-pinning

Description: Configure channeling mode

Syntax:

on

Set channeling mode to ON (static)

active

Set channeling mode to ACTIVE

passive

Set channeling mode to PASSIVE

mac-pinning

Set channeling mode to MAC-PINNING

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# channel-mode on|active|passive|mac-pinning

ciphers

ciphers <WORD>

Description: HTTPS cipher suite

Syntax:

WORD

Provide a valid cipher name

Command Mode: https : HTTPS communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# https
(config-https)# ciphers <WORD>

clear-encryption-key

clear-encryption-key

Description: Clears AES encryption key

Command Mode: crypto aes : AES encryption configuration

Command Path:

# configure [['terminal', 't']]
(config)# crypto aes
(config-aes)# clear-encryption-key

clear-pwd-history

clear-pwd-history

Description: Clears the password history of a locally-authenticated user

Command Mode: username : Create a locally-authenticated user account

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# clear-pwd-history

clear endpoints

clear endpoints leaf <node-id> tenant <tenant-name> bridge-domain <bd-name> vlan <NUMBER>

Description: Clear endpoints

Syntax:

leaf

Leaf Number

node-id

Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807

tenant

Tenant Hosting the endpoints

tenant-name

Tenant Hosting the endpoints (Max Size 63)

bridge-domain

Bridge-Domain Hosting the endpoints

bd-name

Bridge-Domain Hosting the endpoints (Max Size 64)

vlan

The encapsulation VLAN Hosting the endpoints

<1-4094>

The number of the encapsulation VLAN, from 1 to 4094. For example, for vlan-23 you enter 23 in this field.

Command Mode: exec : Exec Mode

Command Path:

# clear endpoints leaf <WORD> tenant <WORD> bridge-domain <WORD> vlan <NUMBER>

clear snapshot file

clear snapshot file <WORD>

Description: Remove snapshot file

Syntax:

WORD

Snapshot file name

Command Mode: exec : Exec Mode

Command Path:

# clear snapshot file <WORD>

clear snapshot job

clear snapshot job <WORD>

Description: Remove snapshot job

Syntax:

WORD

Snapshot job name

Command Mode: exec : Exec Mode

Command Path:

# clear snapshot job <WORD>

clear techsupport controllers

clear techsupport controllers <NUMBER> <WORD>

Description: Clear techsupport status for controllers

Syntax:

<1-32>

Controller id. Number range from=1 to=32

WORD

Techsupport collection time

Command Mode: exec : Exec Mode

Command Path:

# clear techsupport controllers <NUMBER> <WORD>

clear techsupport switch

clear techsupport switch <NUMBER> <WORD>

Description: Clear techsupport status for switch

Syntax:

<101-4000>

Switch id. Number range from=101 to=4000

WORD

Techsupport collection time

Command Mode: exec : Exec Mode

Command Path:

# clear techsupport switch <NUMBER> <WORD>

clear troubleshoot epext session report

clear troubleshoot epext session <ession_name> report

Description: Remove all non-pending reports of a troubleshoot session

Syntax:

session

session

ession_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# clear troubleshoot epext session <ession_name> report

clear troubleshoot eptoep session report

clear troubleshoot eptoep session <session_name> report

Description: Remove all non-pending reports of a troubleshoot session

Syntax:

session

session

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# clear troubleshoot eptoep session <session_name> report

clock display-format

clock display-format local|utc

Description: Configure Clock Display Format

Syntax:

local

Local display format

utc

UTC display format

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# clock display-format local|utc

clock show-offset

clock show-offset enable

Description: Enable/Disable Display of the Offset

Syntax:

enable

Enable/Disable Display of the Offset from UTC

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# clock show-offset enable

clock timezone

clock timezone <timeZone>

Description: Configure clock timezone

Syntax:

timeZone

The Timezone Selection

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# clock timezone <timeZone>

cluster-device

cluster-device <WORD> [vcenter <WORD>] [vm <WORD>]

Description: Configure L4-L7 Cluster Device

Syntax:

WORD

device name (Max Size 64)

WORD

(Optional) vcenter name (Max Size 64)

WORD

(Optional) vm name (Max Size 128)

Command Mode: l4l7 cluster name : Add a L4-L7 Service Device Cluster

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]
(config-cluster)# cluster-device <WORD> [vcenter <WORD>] [vm <WORD>]

cluster-device query-device-health

cluster-device <WORD> [vcenter <WORD>] [vm <WORD>] query-device-health

Description: Re-query for Device Health

Syntax:

WORD

device name (Max Size 64)

WORD

(Optional) vcenter name (Max Size 64)

WORD

(Optional) vm name (Max Size 128)

Command Mode: l4l7 cluster name : Add a L4-L7 Service Device Cluster

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]
(config-cluster)# cluster-device <WORD> [vcenter <WORD>] [vm <WORD>] query-device-health

cluster-device query-device-statistics

cluster-device <WORD> [vcenter <WORD>] [vm <WORD>] query-device-statistics

Description: Re-query for Device Statistics

Syntax:

WORD

device name (Max Size 64)

WORD

(Optional) vcenter name (Max Size 64)

WORD

(Optional) vm name (Max Size 128)

Command Mode: l4l7 cluster name : Add a L4-L7 Service Device Cluster

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]
(config-cluster)# cluster-device <WORD> [vcenter <WORD>] [vm <WORD>] query-device-statistics

cluster-device query-device-validation

cluster-device <WORD> [vcenter <WORD>] [vm <WORD>] query-device-validation

Description: Re-query for Device Validation

Syntax:

WORD

device name (Max Size 64)

WORD

(Optional) vcenter name (Max Size 64)

WORD

(Optional) vm name (Max Size 128)

Command Mode: l4l7 cluster name : Add a L4-L7 Service Device Cluster

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]
(config-cluster)# cluster-device <WORD> [vcenter <WORD>] [vm <WORD>] query-device-validation

cluster-interface

cluster-interface <WORD> [vlan <NUMBER>]

Description: Configure L4-L7 Cluster Interface

Syntax:

WORD

Cluster interface name (Max Size 16)

<vlan>

(Optional) Static Encap/VLAN to user for this cluster interface. Number range from=1 to=4094

Command Mode: l4l7 cluster name : Add a L4-L7 Service Device Cluster

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]
(config-cluster)# cluster-interface <WORD> [vlan <NUMBER>]

comm-policy

comm-policy <WORD>

Description: Configure any communication policy, ssh/telnet/shellinabox/http/https

Syntax:

WORD

Provide a communication policy name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>

configure-avs

configure-avs

Description: Configure a VMware Domain as AVS (N1K) type

Command Mode: vmware-domain : Create a VMM VMware Domain

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-avs

configure-dvs

configure-dvs

Description: Configure a VMware Domain as DVS type

Command Mode: vmware-domain : Create a VMM VMware Domain

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-dvs

configure

configure [['terminal', 't']]

Description: Configuration Mode

Syntax:

terminal

(Optional) configure using terminal

terminal

(Optional) configure using terminal

Command Mode: exec : Exec Mode

Command Path:

# configure [['terminal', 't']]

connection intra service

connection <WORD> intra_service service1 <WORD> connector1 <WORD> service2 <WORD> connector2 <WORD>

Description: Configure l4l7 connection between service nodes

Syntax:

WORD

Connection name (Max Size 64)

service1

Service node 1

WORD

service-node-1 name (Max Size 64)

connector1

Connector on service node 1 that connects to the connection

WORD

service-node-1 connector name (Max Size 64)

service2

Service node 2

WORD

service-node-2 name (Max Size 64)

connector2

Connector on service node 2 that connects to the connection

WORD

service-node-2 connector name (Max Size 64)

Command Mode: l4l7 graph : Configure L4-L7 Service Graph

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 graph <WORD> [contract <contract-option>]
(config-graph)# connection <WORD> intra_service service1 <WORD> connector1 <WORD> service2 <WORD> connector2 <WORD>

connection terminal

connection <WORD> terminal provider|consumer service <WORD> connector <WORD>

Description: Configure l4l7 connection to terminal

Syntax:

WORD

Connection name (Max Size 64)

provider

Provider terminal

consumer

Consumer terminal

service

Service node that connects to a terminal node

WORD

service node name (Max Size 64)

connector

Connector on the service node that connects to a terminal node

WORD

connector name (Max Size 64)

Command Mode: l4l7 graph : Configure L4-L7 Service Graph

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 graph <WORD> [contract <contract-option>]
(config-graph)# connection <WORD> terminal provider|consumer service <WORD> connector <WORD>

connector

connector <WORD> [cluster-interface <WORD>]

Description: Configure Connector for a Service Node

Syntax:

WORD

Connector name (Max Size 64)

WORD

(Optional) Cluster Interface name (Max Size 16)

Command Mode: service : Configure L4-L7 Service

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 graph <WORD> [contract <contract-option>]
(config-graph)# service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode <Available Modes>]
(config-service)# connector <WORD> [cluster-interface <WORD>]

console

console [severity severity <severity-value>]

Description: Enable the logging to console(switches only)

Syntax:

severity <severity-value>

(Optional) The severity level for the logs

Command Mode: logging : Logging server group configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# logging server-group <WORD>
(config-logging)# console [severity severity <severity-value>]

contract-id

contract-id <WORD>

Description: Service contract id of the customer

Syntax:

WORD

The contract id (Max Size 512) surrounded by quotes

Command Mode: destination-profile : Configure destination profile Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# destination-profile
(config-callhome-destnprof)# contract-id <WORD>

contract

contract <WORD> [type <type>]

Description: Configure binary contracts between Application EPGs

Syntax:

WORD

Name of the contract to create (Max Size 64)

type

(Optional) whitelist (permit) or blacklist(deny) or oob-mgmt type of contract

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]

contract consumer

contract consumer <WORD> [qos-class <WORD>]

Description: Add the supplied contract to be consumed by any AEPg on this VRF

Syntax:

WORD

Whitelist contract to consume (Max Size 64)

WORD

(Optional) Qos Level

Command Mode: vrf : Configuration for vrf

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# contract consumer <WORD> [qos-class <WORD>]

contract consumer <WORD> [imported] [label <WORD>] [qos-class <WORD>]

Description: Add a contract consumed by this AEPg, along with an optional list of subject labels

Syntax:

WORD

Whitelist contract to consume (Max Size 64)

imported

(Optional) used for contracts imported from other tenants

WORD

(Optional) Per-Contract label (Max Size 64)

WORD

(Optional) Qos Level

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# contract consumer <WORD> [imported] [label <WORD>] [qos-class <WORD>]

contract consumer <contractName> [imported] [label <WORD>]

Description: Add a contract consumed by this EPG, along with an optional list of subject labels

Syntax:

<contractName>

Whitelist contract to consume

imported

(Optional) Used for contracts imported from other tenants

WORD

(Optional) Per-Contract label (Max Size 64)

Command Mode: external-l3 epg : External L3 EPG configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>]
(config-tenant-l3ext-epg)# contract consumer <contractName> [imported] [label <WORD>]

contract consumer <contractName> [label <label>]

Description: Add a contract consumed by this In-band Epg, along with an optional list of subject labels

Syntax:

<contractName>

link to contract name

label

(Optional)

Command Mode: inband-mgmt : Enter Inside In-band management mode to modify inband properties or create new inband

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# inband-mgmt epg <WORD>
(config-inb-epg)# contract consumer <contractName> [label <label>]

contract consumer <WORD> [imported] [label <WORD>] [qos-class <WORD>]

Description: Add a contract consumed by this EPG, along with an optional list of subject labels

Syntax:

WORD

Whitelist contract to consume (Max Size 64)

imported

(Optional) used for contracts imported from other tenants

WORD

(Optional) Per-Contract label (Max Size 64)

WORD

(Optional) Qos Level

Command Mode: external-l2 : L2 external EPG creation/configuration

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l2 epg <WORD>
(config-tenant-l2ext-epg)# contract consumer <WORD> [imported] [label <WORD>] [qos-class <WORD>]

contract consumer <WORD> [imported]

Description: Add a consumer contract

Syntax:

WORD

Whitelist contract to consume

imported

(Optional) Used for contracts imported from other tenants

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD>
(config-leaf-vrf-route-map-match)# contract consumer <WORD> [imported]

contract deny

contract deny <WORD>

Description: Attach a taboo contract to this AEPg

Syntax:

WORD

Name of the blacklist contract (Max Size 64)

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# contract deny <WORD>

contract deny <contractName>

Description: Attach a taboo contract to this EPG

Syntax:

<contractName>

Name of the blacklist contract

Command Mode: external-l3 epg : External L3 EPG configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>]
(config-tenant-l3ext-epg)# contract deny <contractName>

contract deny <contractName>

Description: Attach a taboo contract to this InBand Epg

Syntax:

<contractName>

Name of the blacklist contract

Command Mode: inband-mgmt : Enter Inside In-band management mode to modify inband properties or create new inband

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# inband-mgmt epg <WORD>
(config-inb-epg)# contract deny <contractName>

contract deny <WORD>

Description: Attach a taboo contract to this EPG

Syntax:

WORD

Name of the blacklist contract (Max Size 64)

Command Mode: external-l2 : L2 external EPG creation/configuration

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l2 epg <WORD>
(config-tenant-l2ext-epg)# contract deny <WORD>

contract enforce

contract enforce [ingress] [egress]

Description: Add a policy enforcement

Syntax:

ingress

(Optional) Policy will be applied at the Ingress Node

egress

(Optional) Policy will be applied at the Egress Node

Command Mode: vrf : Configuration for vrf

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# contract enforce [ingress] [egress]

contract provider

contract provider <WORD> [qos-class <WORD>]

Description: Add the supplied contract to be provided by any AEPg on this VRF

Syntax:

WORD

Whitelist contract provided (Max Size 64)

WORD

(Optional) Qos Level

Command Mode: vrf : Configuration for vrf

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# contract provider <WORD> [qos-class <WORD>]

contract provider <WORD> [label <WORD>] [qos-class <WORD>]

Description: Contract provided by this AEPg, along with an optional list of subject labels

Syntax:

WORD

Whitelist contract to provide (Max Size 64)

WORD

(Optional) Per-Contract label (Max Size 64)

WORD

(Optional) Qos Level

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# contract provider <WORD> [label <WORD>] [qos-class <WORD>]

contract provider <contractName> [label <WORD>]

Description: Add a contract provided by this EPG, along with an optional list of subject labels

Syntax:

<contractName>

Whitelist contract to provide

WORD

(Optional) Per-Contract label (Max Size 64)

Command Mode: external-l3 epg : External L3 EPG configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>]
(config-tenant-l3ext-epg)# contract provider <contractName> [label <WORD>]

contract provider <contractName> [label <label>]

Description: Add a contract provided by this AEPg, along with an optional list of subject labels

Syntax:

<contractName>

link to contract name

label

(Optional)

Command Mode: inband-mgmt : Enter Inside In-band management mode to modify inband properties or create new inband

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# inband-mgmt epg <WORD>
(config-inb-epg)# contract provider <contractName> [label <label>]

contract provider <WORD> [label <WORD>] [qos-class <WORD>]

Description: Add a contract provided by this EPG, along with an optional list of subject labels

Syntax:

WORD

Whitelist contract to provide (Max Size 64)

WORD

(Optional) Per-Contract label (Max Size 64)

WORD

(Optional) Qos Level

Command Mode: external-l2 : L2 external EPG creation/configuration

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l2 epg <WORD>
(config-tenant-l2ext-epg)# contract provider <WORD> [label <WORD>] [qos-class <WORD>]

contract provider <contractName>

Description: Add a contract provided by this AEPg, along with an optional list of subject labels

Syntax:

<contractName>

Name of the contract to be provided

Command Mode: oob-mgmt : Creates/Modify the out of band mgmt under the tenant mgmt

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# oob-mgmt epg <epgval>
(config-oob-epg)# contract provider <contractName>

contract provider <WORD>

Description: Add a provider contract

Syntax:

WORD

Whitelist contract to provide

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD>
(config-leaf-vrf-route-map-match)# contract provider <WORD>

controller-group

controller-group

Description: Controller Upgrade Configuration Mode

Command Mode: firmware : Firmware upgrade configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# controller-group

controller

controller

Description: Configure Controller Node

Syntax:

arg

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# controller

cost

cost <NUMBER>

Description: Set OSPF cost for the interface

Syntax:

<0-65535>

OSPF cost. Number range from=0 to=65535

Command Mode: template ospf interface-policy : Configure OSPF Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf interface-policy <WORD> tenant <WORD>
(config-interface-policy)# cost <NUMBER>

country

country <WORD>

Description: Set The two-letter ISO code for the country where the organization is located.

Syntax:

<WORD>

The two-letter ISO code for the country where the organization is located

Command Mode: csr : A csr mode to create and hold an SSL certificate

Command Path:

# configure [['terminal', 't']]
(config)# crypto keyring <WORD>
(config-keyring)# csr
(config-csr)# country <WORD>

crypto aes

crypto aes

Description: AES encryption configuration

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# crypto aes

crypto ca

crypto ca <WORD>

Description: Configure certificate authority related information

Syntax:

WORD

Trustpoint label (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# crypto ca <WORD>

crypto keyring

crypto keyring <WORD>

Description: A keyring mode to create and hold an SSL certificate

Syntax:

WORD

Provide a keyring name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# crypto keyring <WORD>

crypto webtoken

crypto webtoken

Description: The cryptographic data used for generating and verifying web tokens.

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# crypto webtoken

csr

csr

Description: A csr mode to create and hold an SSL certificate

Command Mode: crypto keyring : A keyring mode to create and hold an SSL certificate

Command Path:

# configure [['terminal', 't']]
(config)# crypto keyring <WORD>
(config-keyring)# csr

customer-id

customer-id <WORD>

Description: The customer id

Syntax:

WORD

The customer id (Max Size 512) surrounded by quotes

Command Mode: destination-profile : Configure destination profile Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# destination-profile
(config-callhome-destnprof)# customer-id <WORD>

Chapter 4. D Commands

- data

- dead-interval

- debug log reset

- debug log set

- decommission controller

- decommission switch

- default-information

- default-originate

- deploy-epg tenant application epg type

- deploy-epg tenant application epg vlan

- deployment-mode

- descr

- description

- destination-profile

- destination

- destination destip

- destination interface

- destination tenant

- dhcp option

- dhcp relay policy

- dhparam

- direction

- disable-connected-check

- disable-peer-as-check

- distance

- dns

- dnssearchsuffix

- dnsservers

- dnssuffix

- domain

- dsr-vip

- dsr

data

data <LINE>

Description: Set A user public key in PEM format.

Syntax:

LINE

user public key in PEM format in quotes (Max Size None)

Command Mode: ssh-key : Update ssh key for the user for ssh authentication

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# ssh-key <WORD>
(config-ssh-key)# data <LINE>

data <CERTIFICATE>

Description: Set PEM encoded certificate

Syntax:

CERTIFICATE

PEM encoded certificate in quotes

Command Mode: certificate : Create AAA user certificate in X.509 format.

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# certificate <WORD>
(config-certificate)# data <CERTIFICATE>

dead-interval

dead-interval <NUMBER>

Description: Set the interval between hello packets from a neighbor before the router declares the neighbor as down

Syntax:

<1-65535>

Interval in seconds. Number range from=1 to=65535

Command Mode: template ospf interface-policy : Configure OSPF Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf interface-policy <WORD> tenant <WORD>
(config-interface-policy)# dead-interval <NUMBER>

debug log reset

debug <node-name> <process> log reset

Description: Reset the log levels to default log level

Syntax:

<node-name>

Node name

<process>

Process name

Command Mode: exec : Exec Mode

Command Path:

# debug <node-name> <process> log reset

debug log set

debug <node-name> <process> log set <topic> <level>

Description: Set log level for a topic

Syntax:

<node-name>

Node name

<process>

Process name

<topic>

Topic name

<level>

Level name

Command Mode: exec : Exec Mode

Command Path:

# debug <node-name> <process> log set <topic> <level>

decommission controller

decommission controller <NUMBER>

Description: Decommission controller

Syntax:

<1-32>

Controller ID. Number range from=1 to=32

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# decommission controller <NUMBER>

decommission switch

decommission switch <NUMBER> [remove-from-controller]

Description: Decommission switch

Syntax:

<101-4000>

Node ID. Number range from=101 to=4000

remove-from-controller

(Optional) Remove the switch from controller (optional)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# decommission switch <NUMBER> [remove-from-controller]

default-information

default-information originate [always]

Description: Control origination of a default route

Syntax:

originate

Originate a default route

always

(Optional) Always advertise default route

Command Mode: vrf : Configure VRF information

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router eigrp default
(config-eigrp)# vrf member tenant <WORD> vrf <WORD>
(config-eigrp-vrf)# default-information originate [always]

default-information originate [always]

Description: Control origination of a default route

Syntax:

originate

Originate a default route

always

(Optional) Always advertise default route

Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router ospf default
(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-ospf-vrf)# default-information originate [always]

default-originate

default-originate

Description: Originate a default toward this peer

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# default-originate

deploy-epg tenant application epg type

deploy-epg tenant <WORD> application <WORD> epg <WORD> type micro-segmented

Description: Deploy micro-segmented AEPg on leaf

Syntax:

tenant

Tenant hosting the AEPg to deploy

WORD

Tenant hosting the AEPg to deploy (Max Size 63)

application

Application hosting the AEPg to deploy

WORD

Application Name (Max Size 64)

epg

AEPg to be deployed on the leaf

WORD

EPg that uses the statically enabled Encap. (Max Size 64)

micro-segmented

micro-segmented AEPg

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# deploy-epg tenant <WORD> application <WORD> epg <WORD> type micro-segmented

deploy-epg tenant application epg vlan

deploy-epg tenant <WORD> application <WORD> epg <WORD> vlan <NUMBER> vlan-domain member <WORD>

Description: Deploy regular AEPg on leaf

Syntax:

tenant

Tenant hosting the AEPg to deploy

WORD

Tenant hosting the AEPg to deploy (Max Size 63)

application

Application hosting the AEPg to deploy

WORD

Application Name (Max Size 64)

epg

AEPg to be deployed on the leaf

WORD

EPg that uses the statically enabled Encap. (Max Size 64)

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

vlan-domain

Vlan Domain for Encapsulation Vlan

member

Vlan Domain for Encapsulation Vlan

WORD

vlan-domain to use to validate encapsulation vlan. (Max Size 64)

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# deploy-epg tenant <WORD> application <WORD> epg <WORD> vlan <NUMBER> vlan-domain member <WORD>

deployment-mode

deployment-mode <WORD>

Description: Set zone deployment mode

Syntax:

WORD

Zone Deployment Mode

Command Mode: zone : Create zone policy

Command Path:

# configure [['terminal', 't']]
(config)# zones
(config-zones)# zone <WORD>
(config-zone)# deployment-mode <WORD>

descr

descr <WORD>

Description: RADIUS server descr for authentication

Syntax:

<WORD>

descr for authentication (Max Size 128)

Command Mode: radius-server host : RADIUS server's DNS name or its IP address

Command Path:

# configure [['terminal', 't']]
(config)# radius-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# descr <WORD>

description

description <description>

Description: Add a description to a power supply redundancy policy

Syntax:

<description>

Power supply redundancy policy description string

Command Mode: power : Create a power supply redundancy policy

Command Path:

# configure [['terminal', 't']]
(config)# power redundancy-policy <WORD>
(config-power)# description <description>

description <LINE>

Description: Set description

Syntax:

LINE

Set description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: rbac security-domain : Create AAA security domain for processing authentication requests.

Command Path:

# configure [['terminal', 't']]
(config)# rbac security-domain <WORD>
(config-security-domain)# description <LINE>

description <WORD>

Description: The description of callhome destination-profile

Syntax:

WORD

The description (Max Size 128) surrounded by single quotes

Command Mode: destination-profile : Configure destination profile Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# destination-profile
(config-callhome-destnprof)# description <WORD>

description <WORD>

Description: Add switch-group description

Syntax:

WORD

Description string, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128)

Command Mode: switch-group : Create switch firmware upgrade policy

Command Path:

# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# switch-group <WORD>
(config-firmware-switch)# description <WORD>

description <STRING>

Description: Configure STP description

Syntax:

STRING

Description

Command Mode: region : STP MST region configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# spanning-tree mst configuration
(config-stp)# region <WORD>
(config-stp-region)# description <STRING>

description <WORD>

Description: Description string, surrounded by single quotes if with spaces ex: 'My descr'

Syntax:

WORD

Description string, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128)

Command Mode: template dhcp relay : Create a DHCP Relay policy

Command Path:

# configure [['terminal', 't']]
(config)# template dhcp relay policy <WORD>
(config-template-dhcp-relay)# description <WORD>

description <description>

Description: Update Policy-Group Template description

Syntax:

<description>

Command Mode: template policy-group : Configure Policy Group Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# description <description>

description <description>

Description: Update Port-Channel Template description

Syntax:

<description>

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# description <description>

description <WORD>

Description: Add a description string to a tenant, surrounded by single quotes if with spaces ex: 'My descr'

Syntax:

WORD

Description string, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# description <WORD>

description <WORD>

Description: Add a description on a contract, surrounded by single quotes if with spaces ex: 'My descr'

Syntax:

WORD

Contract description, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128)

Command Mode: contract : Configure binary contracts between Application EPGs

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# description <WORD>

description <WORD>

Description: Add a description on a subject, surrounded by single quotes if with spaces ex: 'My descr'

Syntax:

WORD

Subject description, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128)

Command Mode: subject : Configuration a subject on the contract

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# subject <WORD>
(config-tenant-contract-subj)# description <WORD>

description <WORD>

Description: Add a description on a vrf, surrounded by single quotes if with spaces ex: 'My descr'

Syntax:

WORD

VRF description, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128)

Command Mode: vrf : Configuration for vrf

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# description <WORD>

description <WORD>

Description: Add a description on an application, surrounded by single quotes if with spaces ex: 'My descr'

Syntax:

WORD

Description string, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128)

Command Mode: application : application configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# description <WORD>

description <WORD>

Description: Add a description on an epg, surrounded by single quotes if with spaces ex: 'My descr'

Syntax:

WORD

Description string, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128)

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# description <WORD>

description <epgDescr>

Description: Add a description on an epg

Syntax:

<epgDescr>

Command Mode: inband-mgmt : Enter Inside In-band management mode to modify inband properties or create new inband

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# inband-mgmt epg <WORD>
(config-inb-epg)# description <epgDescr>

description <WORD>

Description: Add a description on a bridge-domain, surrounded by single quotes if with spaces ex: 'My descr'

Syntax:

WORD

Bridge-domain description, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128)

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# description <WORD>

description <WORD>

Description: Add a description on an epg, surrounded by single quotes if with spaces ex: 'My descr'

Syntax:

WORD

Description string, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128)

Command Mode: external-l2 : L2 external EPG creation/configuration

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l2 epg <WORD>
(config-tenant-l2ext-epg)# description <WORD>

description <epgDescr>

Description: Add a description on an epg

Syntax:

<epgDescr>

Command Mode: oob-mgmt : Creates/Modify the out of band mgmt under the tenant mgmt

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# oob-mgmt epg <epgval>
(config-oob-epg)# description <epgDescr>

description <WORD>

Description: Description string, surrounded by single quotes if with spaces ex: 'My descr'

Syntax:

WORD

Description string, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128)

Command Mode: template dhcp relay : Create a DHCP Relay policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template dhcp relay policy <WORD>
(config-tenant-template-dhcp-relay)# description <WORD>

description <LINE>

Description: Update igmp snooping policy description

Syntax:

LINE

IGMP snooping policy description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: template ip igmp snooping policy : Create an IGMP snooping policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ip igmp snooping policy <WORD>
(config-tenant-template-ip-igmp-snooping)# description <LINE>

description <LINE>

Description: Update Leaf Interface Profile description

Syntax:

LINE

Leaf-If-Profile description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: leaf-interface-profile : Create Leaf Interface Profile

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# description <LINE>

description <LINE>

Description: Update Leaf Interface Group description

Syntax:

LINE

Leaf-If-group description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: leaf-interface-group : Configure Leaf Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>
(config-leaf-if-group)# description <LINE>

description <LINE>

Description: Update Leaf Profile description

Syntax:

LINE

Leaf-Profile description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: leaf-profile : Configure Leaf Profile

Command Path:

# configure [['terminal', 't']]
(config)# leaf-profile <WORD>
(config-leaf-profile)# description <LINE>

description <LINE>

Description: Update Leaf Group description

Syntax:

LINE

Leaf-group description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: leaf-group : Configure Leaf Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-profile <WORD>
(config-leaf-profile)# leaf-group <WORD>
(config-leaf-group)# description <LINE>

description <LINE>

Description: Update Fex Profile description

Syntax:

LINE

Fex-Profile description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: fex-profile : Configure Fex Profile

Command Path:

# configure [['terminal', 't']]
(config)# fex-profile <WORD>
(config-fex-profile)# description <LINE>

description <LINE>

Description: Update Fex Interface Group description

Syntax:

LINE

Fex-If-group description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: fex-interface-group : Configure Fex Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# fex-profile <WORD>
(config-fex-profile)# fex-interface-group <WORD>
(config-fex-if-group)# description <LINE>

description <LINE>

Description: Update interface vlan description

Syntax:

LINE

interface vlan description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# description <LINE>

description <LINE>

Description: Update Interface description

Syntax:

LINE

Interface description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# description <LINE>

description <LINE>

Description: Update Port-Channel description

Syntax:

LINE

Port-Channel description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# description <LINE>

description <LINE>

Description: Update VPC description

Syntax:

LINE

VPC description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# description <LINE>

description <LINE>

Description: Add description to the session

Syntax:

LINE

Session description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: monitor access : Configue monitor session for access interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# description <LINE>

description <LINE>

Description: Add description to the session

Syntax:

LINE

Session description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: monitor fabric : Configue monitor session for fabric interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor fabric session <session_name>
(config-monitor-fabric)# description <LINE>

description <LINE>

Description: Add description to the session

Syntax:

LINE

Session description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: monitor tenant : Configue monitor session for tenant EPGs

Command Path:

# configure [['terminal', 't']]
(config)# monitor tenant <tenant_name> session <session_name>
(config-monitor-tenant)# description <LINE>

description <LINE>

Description: Add description to the session

Syntax:

LINE

Session description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: monitor virtual : Configure monitor session for virtual switches

Command Path:

# configure [['terminal', 't']]
(config)# monitor virtual session <WORD>
(config-monitor-virtual)# description <LINE>

description <STRING>

Description: Configure schedule description

Syntax:

STRING

Scheduler description

Command Mode: scheduler : Scheduler configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# scheduler fabric|controller schedule <WORD>
(config-scheduler)# description <STRING>

description <WORD>

Description: Add description for this server-group

Syntax:

WORD

Description (Max Size 128) surrounded by single quotes

Command Mode: logging : Logging server group configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# logging server-group <WORD>
(config-logging)# description <WORD>

description <WORD>

Description: Add zone description

Syntax:

WORD

Description string, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128)

Command Mode: zone : Create zone policy

Command Path:

# configure [['terminal', 't']]
(config)# zones
(config-zones)# zone <WORD>
(config-zone)# description <WORD>

destination-profile

destination-profile

Description: Configure destination profile Parameters

Command Mode: callhome : Callhome common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# destination-profile

destination

destination <WORD>

Description: Configure destination Parameters

Syntax:

WORD

The name (Max Size 64)

Command Mode: destination-profile : Configure destination profile Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# destination-profile
(config-callhome-destnprof)# destination <WORD>

destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>

Description: Configure monitor remote destination

Syntax:

tenant

tenant

tenant_name

tenant name (Max Size 63)

application

application

application_name

application name

epg

epg

epg_name

epg name

destination-ip

destination IP

A.B.C.D

IP address

source-ip-prefix

source IP prefix

A.B.C.D/M

IP adddress prefix

Command Mode: monitor fabric : Configue monitor session for fabric interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor fabric session <session_name>
(config-monitor-fabric)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>

destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>

Description: Configure monitor remote destination

Syntax:

tenant

tenant

tenant_name

tenant name (Max Size 63)

application

application

application_name

application name (Max Size 64)

epg

epg

epg_name

epg name (Max Size 64)

destination-ip

destination IP

A.B.C.D

IP address

source-ip-prefix

source IP prefix

A.B.C.D/M

IP adddress prefix

Command Mode: monitor tenant : Configue monitor session for tenant EPGs

Command Path:

# configure [['terminal', 't']]
(config)# monitor tenant <tenant_name> session <session_name>
(config-monitor-tenant)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>

destination destip

destination destip <A.B.C.D>

Description: Configure monitor remote destination

Syntax:

A.B.C.D

Destination IP address

Command Mode: monitor virtual : Configure monitor session for virtual switches

Command Path:

# configure [['terminal', 't']]
(config)# monitor virtual session <WORD>
(config-monitor-virtual)# destination destip <A.B.C.D>

destination interface

destination interface ethernet <ethernet> leaf <leaf Id>

Description: Configure monitor local destination

Syntax:

ethernet

ethernet

<ethernet>

<ethernet>

leaf

leaf

<leaf Id>

leaf Id

Command Mode: monitor access : Configue monitor session for access interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# destination interface ethernet <ethernet> leaf <leaf Id>

destination tenant

destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>

Description: Configure monitor remote destination

Syntax:

tenant_name

tenant name (Max Size 63)

application

application

application_name

application name (Max Size 64)

epg

epg

epg_name

epg name (Max Size 64)

destination-ip

destination IP

A.B.C.D

IP address

source-ip-prefix

source IP prefix

A.B.C.D/M

IP adddress prefix

Command Mode: monitor access : Configue monitor session for access interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>

destination tenant <WORD> application <WORD> epg <WORD> mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE

Description: Configure monitor local destination

Syntax:

WORD

tenant name (Max Size 63)

application

application

WORD

application name (Max Size 64)

epg

epg

WORD

epg name (Max Size 64)

mac

mac

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

Command Mode: monitor virtual : Configure monitor session for virtual switches

Command Path:

# configure [['terminal', 't']]
(config)# monitor virtual session <WORD>
(config-monitor-virtual)# destination tenant <WORD> application <WORD> epg <WORD> mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE

dhcp option

dhcp option <WORD> id <NUMBER> data <WORD>

Description: Add or modify an existing DHCP option when relayed from the server to the client

Syntax:

WORD

Name of the option to add (Max Size 64)

id

ID of the option

<0-255>

ID of the option. Number range from=0 to=255

data

Body of the Option TLV as hex string

WORD

Body of the Option TLV as hex string, surrounded by single quotes ex: 'foo*' (Max Size 256)

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# dhcp option <WORD> id <NUMBER> data <WORD>

dhcp relay policy

dhcp relay policy tenant|infra <WORD> [option <WORD>]

Description: Associate the BD with a DHCP Relay policy

Syntax:

tenant

Select DHCP policies from current Tenant

infra

Select DHCP policy from infra

WORD

Name of the DHCP relay policy (Max Size 64)

WORD

(Optional) Name of the DHCP option policy (Max Size 64)

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# dhcp relay policy tenant|infra <WORD> [option <WORD>]

dhparam

dhparam <dhparam>

Description: Set the DH parameter used for HTTPS communication service

Syntax:

dhparam

DH Param as comma separated values like val1,val2,..valN

Command Mode: https : HTTPS communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# https
(config-https)# dhparam <dhparam>

direction

direction both|rx|tx

Description: Monitor direction

Syntax:

both

both

rx

rx

tx

tx

Command Mode: source interface ethernet : Configure monitor for ethernet access interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# source interface ethernet <ethernet> leaf <leaf Id>
(config-monitor-access-source)# direction both|rx|tx

direction both|rx|tx

Description: Monitor direction

Syntax:

both

both

rx

rx

tx

tx

Command Mode: source interface port-channel : Configure monitor for port-channel interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# source interface port-channel <port-channel list> leaf <leaf Id> [fex <fex Id>]
(config-monitor-access-source)# direction both|rx|tx

direction both|rx|tx

Description: Monitor direction

Syntax:

both

both

rx

rx

tx

tx

Command Mode: source interface vpc : Configure monitor for VPC interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# source interface vpc <vpc list> leaf <leaf Id1> <leaf Id2> [fex <fex Ids>]
(config-monitor-access-source)# direction both|rx|tx

direction both|rx|tx

Description: Monitor direction

Syntax:

both

both

rx

rx

tx

tx

Command Mode: source interface ethernet : Configure monitor for ethernet fabric interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor fabric session <session_name>
(config-monitor-fabric)# source interface ethernet <ethernet> switch <switch Id>
(config-monitor-fabric-source)# direction both|rx|tx

direction both|rx|tx

Description: Monitor direction

Syntax:

both

both

rx

rx

tx

tx

Command Mode: source application : Configure EPG as monitor source

Command Path:

# configure [['terminal', 't']]
(config)# monitor tenant <tenant_name> session <session_name>
(config-monitor-tenant)# source application <application_name> epg <epg_name>
(config-monitor-tenant-source)# direction both|rx|tx

direction both|rx|tx

Description: Configure monitor source direction

Syntax:

both

both

rx

rx

tx

tx

Command Mode: source : Configure monitor virtual source

Command Path:

# configure [['terminal', 't']]
(config)# monitor virtual session <WORD>
(config-monitor-virtual)# source tenant <WORD> application <WORD> epg <WORD> [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]
(config-monitor-virtual-source)# direction both|rx|tx

disable-connected-check

disable-connected-check

Description: Disable check for directly connected peer

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# disable-connected-check

disable-peer-as-check

disable-peer-as-check

Description: Disable checking of peer AS-number while advertising

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# disable-peer-as-check

distance

distance <NUMBER>

Description: Set OSPF Policy Preferred Administrative Distance

Syntax:

<1-255>

Distance Value. Number range from=1 to=255

Command Mode: template ospf vrf-policy : Configure Router OSPF Timer Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf vrf-policy <WORD> tenant <WORD>
(config-vrf-policy)# distance <NUMBER>

distance <NUMBER> <NUMBER> <NUMBER>

Description: Configure BGP Address Family Distance Properties

Syntax:

<1-255>

The administrative distance of eBGP routes. Number range from=1 to=255

<1-255>

The administrative distance of iBGP routes. Number range from=1 to=255

<1-255>

The administrative distance of local routes. Number range from=1 to=255

Command Mode: template bgp address-family : Configure Router BGP Address Family Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template bgp address-family <WORD> tenant <WORD>
(config-bgp-af)# distance <NUMBER> <NUMBER> <NUMBER>

distance <NUMBER> <NUMBER>

Description: Set EIGRP adminstrative distances

Syntax:

<1-255>

The administrative distance preference for internal routes. Number range from=1 to=255

<1-255>

The administrative distance preference for external routes. Number range from=1 to=255

Command Mode: template eigrp vrf-policy : Configure EIGRP VRF policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template eigrp vrf-policy <WORD> tenant <WORD>
(config-template-eigrp-vrf-pol)# distance <NUMBER> <NUMBER>

distance <NUMBER> <NUMBER>

Description: Set EIGRP adminstrative distances

Syntax:

<1-255>

The administrative distance preference for internal routes. Number range from=1 to=255

<1-255>

The administrative distance preference for external routes. Number range from=1 to=255

Command Mode: address-family : EIGRP Policy Address Family

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router eigrp default
(config-eigrp)# vrf member tenant <WORD> vrf <WORD>
(config-eigrp-vrf)# address-family ipv4|ipv6 unicast
(config-address-family)# distance <NUMBER> <NUMBER>

dns

dns

Description: Configure default dns policy

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# dns

dns label <WORD>

Description: Add a DNS policy to the VRF

Syntax:

label

Dns policy to apply

WORD

Dns policy to apply (Max Size 64)

Command Mode: vrf : Configuration for vrf

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# dns label <WORD>

dnssearchsuffix

dnssearchsuffix <suffix>

Description: Add DNS search suffix

Syntax:

suffix

suffix

Command Mode: microsoft : Configure static ip pool

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# microsoft static-ip-pool <name> gateway <gwAddress>
(config-tenant-app-epg-ms-ip-pool)# dnssearchsuffix <suffix>

dnsservers

dnsservers <DNS server list>

Description: Add dns servers

Syntax:

DNS server list

DNS server list

Command Mode: microsoft : Configure static ip pool

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# microsoft static-ip-pool <name> gateway <gwAddress>
(config-tenant-app-epg-ms-ip-pool)# dnsservers <DNS server list>

dnssuffix

dnssuffix <suffix>

Description: Add dns suffix

Syntax:

suffix

suffix

Command Mode: microsoft : Configure static ip pool

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# microsoft static-ip-pool <name> gateway <gwAddress>
(config-tenant-app-epg-ms-ip-pool)# dnssuffix <suffix>

domain

domain <WORD>

Description: Create the AAA domain to which the user belongs.

Syntax:

WORD

Domain for the user

Command Mode: username : Create a locally-authenticated user account

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# domain <WORD>

domain <WORD> [default]

Description: Configure the domains for dns servers

Syntax:

WORD

Domain in the format ^([a-zA-Z]|[a-zA-Z][a-zA-Z0-9]|[a-zA-Z][a-zA-Z0-9-.]{0,253}[a-zA-Z0-9])$

default

(Optional) Set the default domain for dns servers

Command Mode: dns : Configure default dns policy

Command Path:

# configure [['terminal', 't']]
(config)# dns
(config-dns)# domain <WORD> [default]

dsr-vip

dsr-vip <WORD>

Description: Configure DSR VIP For a L4-L7 Graph Connector.

Syntax:

WORD

Enter VIP address (Max Size None)

Command Mode: connector : Configure Connector for a Service Node

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 graph <WORD> [contract <contract-option>]
(config-graph)# service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode <Available Modes>]
(config-service)# connector <WORD> [cluster-interface <WORD>]
(config-connector)# dsr-vip <WORD>

dsr

dsr virtual-ip-address <address> [description <description>]

Description: Add a DSR virtual IP address

Syntax:

virtual-ip-address

Virtual IP address of load balancer

<address>

IP address

description

(Optional) description

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# dsr virtual-ip-address <address> [description <description>]

Chapter 5. E Commands

- ebgp-multihop

- echo-address

- echo-mode

- echo-rx-interval

- email-addr

- email-contact

- email

- enable-ssl

- encryption

- end

- endpoint

- endpoint loop-detect action bd-learn-disable

- endpoint loop-detect action port-disable

- endpoint loop-detect enable

- endpoint loop-detect factor

- endpoint loop-detect interval

- endpoint move-detection

- endpoint retention bounce-age-interval

- endpoint retention hold-interval

- endpoint retention local-age-interval

- endpoint retention move-frequency

- endpoint retention policy

- endpoint retention remote-age-interval

- enforce-subnet-learning

- epg

- eraseconfig

- errdisable recovery cause bpduguard

- errdisable recovery cause ep-move

- errdisable recovery cause mcp-loop

- errdisable recovery interval

- erspan-id

- exec

- exit

- expiration

- expires

- export

- external-l2

- external-l3

- external-l3 epg

ebgp-multihop

ebgp-multihop <NUMBER>

Description: Specify multihop TTL for remote peer

Syntax:

<1-255>

EBGP TTL value. Number range from=1 to=255

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# ebgp-multihop <NUMBER>

echo-address

echo-address <arg>

Description: Configure BFD ECHO-SRC-ADDRESS value

Syntax:

arg

Command Mode: template bfd : BFD group of commands

Command Path:

# configure [['terminal', 't']]
(config)# template bfd ip|ipv6 <WORD>
(config-bfd)# echo-address <>

echo-mode

echo-mode enable

Description: Enable Echo mode

Syntax:

enable

Enable Echo mode

Command Mode: template bfd : Configure BFD Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template bfd <WORD> tenant <WORD>
(config-template-bfd-pol)# echo-mode enable

echo-rx-interval

echo-rx-interval <NUMBER>

Description: Configure BFD ECHO-RX-INTERVAL value in milliseconds

Syntax:

<interval>

BFD interval. Number range from=50 to=999

Command Mode: template bfd : BFD group of commands

Command Path:

# configure [['terminal', 't']]
(config)# template bfd ip|ipv6 <WORD>
(config-bfd)# echo-rx-interval <NUMBER>

echo-rx-interval <NUMBER>

Description: Configure Echo Rx Interval in milliseconds

Syntax:

<interval>

Echo Rx Interval. Number range from=50 to=999

Command Mode: template bfd : Configure BFD Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template bfd <WORD> tenant <WORD>
(config-template-bfd-pol)# echo-rx-interval <NUMBER>

email-addr

email-addr <WORD>

Description: Configure the e-mail address

Syntax:

WORD

The email address (Max Size None)

Command Mode: destination : Configure destination Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# destination-profile
(config-callhome-destnprof)# destination <WORD>
(config-callhome-destnprof-destn)# email-addr <WORD>

email-contact

email-contact <WORD>

Description: The contact e-mail address

Syntax:

WORD

Contract e-mail address (Max Size 512)

Command Mode: destination-profile : Configure destination profile Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# destination-profile
(config-callhome-destnprof)# email-contact <WORD>

email

email <WORD>

Description: Set The email address of the locally-authenticated user.

Syntax:

WORD

email address of the locally-authenticated user

Command Mode: username : Create a locally-authenticated user account

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# email <WORD>

email <WORD>

Description: Set The email address of the organization contact person.

Syntax:

<WORD>

email address (Max Size 40)

Command Mode: csr : A csr mode to create and hold an SSL certificate

Command Path:

# configure [['terminal', 't']]
(config)# crypto keyring <WORD>
(config-keyring)# csr
(config-csr)# email <WORD>

enable-ssl

enable-ssl

Description: enabling an SSL connection with the LDAP provider

Command Mode: ldap-server host : LDAP server DNS name or IP address

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# enable-ssl

encryption

encryption

Description: Enable AES Encryption

Command Mode: crypto aes : AES encryption configuration

Command Path:

# configure [['terminal', 't']]
(config)# crypto aes
(config-aes)# encryption

end

end

Description: Exit to the exec mode

Command Mode: exec : Exec Mode

Command Path:

# end

endpoint

endpoint retention <WORD>

Description: Specify an endpoint retention policy for this VRF

Syntax:

retention

Specify an endpoint retention policy for this VRF

WORD

Endpoint Retention Policy (Max Size 64)

Command Mode: vrf : Configuration for vrf

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# endpoint retention <WORD>

endpoint loop-detect action bd-learn-disable

endpoint loop-detect action bd-learn-disable

Description: Configure EP Loop Protection Action to BD-Learn-Disable

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# endpoint loop-detect action bd-learn-disable

endpoint loop-detect action port-disable

endpoint loop-detect action port-disable

Description: Configure EP Loop Protection Action to Port-Disable

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# endpoint loop-detect action port-disable

endpoint loop-detect enable

endpoint loop-detect enable

Description: Enable/Disable Endpoint Loop-Detect Policy

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# endpoint loop-detect enable

endpoint loop-detect factor

endpoint loop-detect factor <NUMBER>

Description: Configure End Point Loop Detection Factor

Syntax:

<1-255>

End Point Loop Protection Multipication Factor. Number range from=1 to=255

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# endpoint loop-detect factor <NUMBER>

endpoint loop-detect interval

endpoint loop-detect interval <NUMBER>

Description: Configure End Point Loop Detection Interval

Syntax:

<30-300>

End Point Loop Detection Interval. Number range from=30 to=300

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# endpoint loop-detect interval <NUMBER>

endpoint move-detection

endpoint move-detection <WORD>

Description: Endpoint Move detection Mode

Syntax:

WORD

Endpoint Move detection Mode

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# endpoint move-detection <WORD>

endpoint retention bounce-age-interval

endpoint retention bounce-age-interval x in <0-0> or <150-65535>

Description: Set the bounce age interval for endpoints

Syntax:

x in <0-0> or <150-65535>

Set the Bounce Age Interval, use 0 for infinite

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# endpoint retention bounce-age-interval x in <0-0> or <150-65535>

endpoint retention bounce-age-interval x in <0-0> or <150-65535>

Description: Set the bounce age interval for endpoints

Syntax:

x in <0-0> or <150-65535>

Set the Bounce Age Interval, use 0 for infinite

Command Mode: template endpoint retention policy : Configure an endpoint retention policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template endpoint retention policy <WORD>
(config-tenant-template-endpoint-retention)# endpoint retention bounce-age-interval x in <0-0> or <150-65535>

endpoint retention hold-interval

endpoint retention hold-interval <NUMBER>

Description: Set the hold interval for endpoints

Syntax:

<5-65535>

Set the Hold Interval. Number range from=5 to=65535

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# endpoint retention hold-interval <NUMBER>

endpoint retention hold-interval <NUMBER>

Description: Set the hold interval for endpoints

Syntax:

<5-65535>

Set the Hold Interval. Number range from=5 to=65535

Command Mode: template endpoint retention policy : Configure an endpoint retention policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template endpoint retention policy <WORD>
(config-tenant-template-endpoint-retention)# endpoint retention hold-interval <NUMBER>

endpoint retention local-age-interval

endpoint retention local-age-interval x in <0-0> or <120-65535>

Description: Set the local endpoint age interval

Syntax:

x in <0-0> or <120-65535>

Set the local endpoint age interval, use 0 for infinite

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# endpoint retention local-age-interval x in <0-0> or <120-65535>

endpoint retention local-age-interval x in <0-0> or <120-65535>

Description: Set the local endpoint age interval

Syntax:

x in <0-0> or <120-65535>

Set the local endpoint age interval, use 0 for infinite

Command Mode: template endpoint retention policy : Configure an endpoint retention policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template endpoint retention policy <WORD>
(config-tenant-template-endpoint-retention)# endpoint retention local-age-interval x in <0-0> or <120-65535>

endpoint retention move-frequency

endpoint retention move-frequency <NUMBER>

Description: Set the move frequency

Syntax:

<0-65535>

Set the move frequency. Number range from=0 to=65535

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# endpoint retention move-frequency <NUMBER>

endpoint retention move-frequency <NUMBER>

Description: Set the move frequency

Syntax:

<0-65535>

Set the move frequency. Number range from=0 to=65535

Command Mode: template endpoint retention policy : Configure an endpoint retention policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template endpoint retention policy <WORD>
(config-tenant-template-endpoint-retention)# endpoint retention move-frequency <NUMBER>

endpoint retention policy

endpoint retention policy <WORD>

Description: Associate the BD with an endpoint retention policy

Syntax:

WORD

Name of the endpoint retention policy to set (Max Size 64)

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# endpoint retention policy <WORD>

endpoint retention remote-age-interval

endpoint retention remote-age-interval x in <0-0> or <120-65535>

Description: Set the remote endpoint age interval

Syntax:

x in <0-0> or <120-65535>

Remote endpoint age interval, use 0 for infinite

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# endpoint retention remote-age-interval x in <0-0> or <120-65535>

endpoint retention remote-age-interval x in <0-0> or <120-65535>

Description: Set the remote endpoint age interval

Syntax:

x in <0-0> or <120-65535>

Remote endpoint age interval, use 0 for infinite

Command Mode: template endpoint retention policy : Configure an endpoint retention policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template endpoint retention policy <WORD>
(config-tenant-template-endpoint-retention)# endpoint retention remote-age-interval x in <0-0> or <120-65535>

enforce-subnet-learning

enforce-subnet-learning

Description: Subnet learning enforcement

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# enforce-subnet-learning

epg

epg <WORD> [type <WORD>]

Description: AEPg configuration mode

Syntax:

WORD

Application EPG name (Max Size 64)

WORD

(Optional) Specify EPG type

Command Mode: application : application configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]

eraseconfig

eraseconfig

Description: Erase config and reboot

Command Mode: exec : Exec Mode

Command Path:

# eraseconfig

errdisable recovery cause bpduguard

errdisable recovery cause bpduguard

Description: Enable timer to recover from BPDU Guard error disable

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# errdisable recovery cause bpduguard

errdisable recovery cause ep-move

errdisable recovery cause ep-move

Description: Enable timer to recover from End Point Move error disable

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# errdisable recovery cause ep-move

errdisable recovery cause mcp-loop

errdisable recovery cause mcp-loop

Description: Enable timer to recover from MCP Loop error disable

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# errdisable recovery cause mcp-loop

errdisable recovery interval

errdisable recovery interval <NUMBER>

Description: Configure Error Disable Recovery Interval

Syntax:

<30-65535>

Timer-interval (sec). Number range from=30 to=65535

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# errdisable recovery interval <NUMBER>

erspan-id

erspan-id <id>

Description: Erspan Id

Syntax:

id

erspan Id. Number range from=1 to=1023

Command Mode: destination tenant : Configure monitor remote destination

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>
(config-monitor-access-dest)# erspan-id <id>

erspan-id <id>

Description: Erspan Id

Syntax:

id

erspan Id. Number range from=1 to=1023

Command Mode: destination : Configure monitor remote destination

Command Path:

# configure [['terminal', 't']]
(config)# monitor fabric session <session_name>
(config-monitor-fabric)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>
(config-monitor-fabric-dest)# erspan-id <id>

erspan-id <arg>

Description: Erspan Id

Syntax:

arg

erspan Id. Number range from=1 to=1023

Command Mode: destination : Configure monitor remote destination

Command Path:

# configure [['terminal', 't']]
(config)# monitor tenant <tenant_name> session <session_name>
(config-monitor-tenant)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>
(config-monitor-tenant-dest)# erspan-id <>

erspan-id <arg>

Description: Configure ERSPAN ID

Syntax:

arg

ERSPAN ID. Number range from=1 to=1023

Command Mode: destination destip : Configure monitor remote destination

Command Path:

# configure [['terminal', 't']]
(config)# monitor virtual session <WORD>
(config-monitor-virtual)# destination destip <A.B.C.D>
(config-monitor-virtual-remote-dest)# erspan-id <>

exec

exec

Description: Exec Mode

Command Mode: None

exit

exit

Description: Exit from current mode

Command Mode: exec : Exec Mode

Command Path:

# exit

expiration

expiration <DATE>

Description: If expires enabled, Set expiration date of locally-authenticated user account.

Syntax:

DATE

UTC Date format (YYYY-MM-DDTHH:MM:SS.mmm[+-]hh:mm)

Command Mode: username : Create a locally-authenticated user account

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# expiration <DATE>

expires

expires

Description: Enable expiry for locally-authenticated user account

Command Mode: username : Create a locally-authenticated user account

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# expires

export

export to tenant <WORD> [as <WORD>]

Description: Export a contract to another tenant

Syntax:

to

Tenant to export the command to

tenant

Tenant to export the command to

WORD

Tenant to export the command to (Max Size 63)

WORD

(Optional) New name under which the contract will be known (Max Size 64)

Command Mode: contract : Configure binary contracts between Application EPGs

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# export to tenant <WORD> [as <WORD>]

export map <WORD>

Description: VRF export

Syntax:

map

Route-map for inter VRF route leak

WORD

Route Map Name (Max Size 63)

Command Mode: vrf : Configure VRF parameters

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# export map <WORD>

external-l2

external-l2 epg <WORD>

Description: L2 external EPG creation/configuration

Syntax:

epg

L2 external EPG name

WORD

L2 external EPG name (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l2 epg <WORD>

external-l3

external-l3 epg <WORD>

Description: External L3 EPG to associate

Syntax:

epg

Specify the external EPG

WORD

External L3 EPG name

Command Mode: vrf : Configure VRF parameters

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# external-l3 epg <WORD>

external-l3 epg

external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>]

Description: External L3 EPG configuration mode

Syntax:

WORD

External L3 EPG name (Max Size 49)

oob-mgmt

(Optional) External L3 EPG for Out of band

l3out

(Optional) Configure external-l3 epg on an API configured L3Out

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>]

Chapter 6. F Commands

- fabric clear

- fabric show

- fex-interface-group

- fex-profile

- fex

- file

- filter

- filter tenant bd

- filter tenant vrf

- firewall-logging

- firewall

- firmware-version

- firmware

- firmware repository add

- firmware repository delete

- firmware upgrade controller-group

- firmware upgrade switch-group

- first-file

- first-name

- format

fabric clear

fabric <nodes> clear <scope>

Description: clear switch information

Syntax:

<nodes>

node list

<scope>

switch command

Command Mode: exec : Exec Mode

Command Path:

# fabric <nodes> clear <scope>

fabric show

fabric <nodes> show <scope>

Description: show switch information

Syntax:

<nodes>

node list

<scope>

switch command

Command Mode: exec : Exec Mode

Command Path:

# fabric <nodes> show <scope>

fex-interface-group

fex-interface-group <WORD>

Description: Configure Fex Interface Group

Syntax:

WORD

Fex Interface Group Name (Max Size 64)

Command Mode: fex-profile : Configure Fex Profile

Command Path:

# configure [['terminal', 't']]
(config)# fex-profile <WORD>
(config-fex-profile)# fex-interface-group <WORD>

fex-profile

fex-profile <WORD>

Description: Configure Fex Profile

Syntax:

WORD

Fex Profile Name (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# fex-profile <WORD>

fex

fex associate <NUMBER> template <WORD>

Description: Configure Fex on the Interface

Syntax:

associate

Associate the port to a FEX

NUMBER

Fex Number. Number range from=101 to=164

template

Associate a template

WORD

Fex Template Name (Max Size 64)

Command Mode: leaf-interface-group : Configure Leaf Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>
(config-leaf-if-group)# fex associate <NUMBER> template <WORD>

fex associate <arg>

Description: Configure Fex on the Interface

Syntax:

associate

Associate the port to a FEX

arg

Fex Number. Number range from=101 to=164

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# fex associate <>

file

file <FILENAME>

Description: Snapshot file name

Syntax:

FILENAME

Snapshot file name

Command Mode: snapshot download : Configuration snapshot download setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot download <WORD>
(config-download)# file <FILENAME>

file <FILENAME>

Description: Snapshot file name

Syntax:

FILENAME

Snapshot file name

Command Mode: snapshot import : Configuration import setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot import <WORD>
(config-import)# file <FILENAME>

file <FILENAME>

Description: Snapshot file name

Syntax:

FILENAME

Snapshot file name

Command Mode: snapshot upload : Configuration snapshot upload setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot upload <WORD>
(config-upload)# file <FILENAME>

filter

filter <WORD>

Description: Set the LDAP filter to be used in a user search

Syntax:

<WORD>

filter used in user search (Max Size 63)

Command Mode: ldap-server host : LDAP server DNS name or IP address

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# filter <WORD>

filter tenant <tenant_name> application <application_name> epg <epg_name>

Description: EPG filter

Syntax:

tenant

tenant

tenant_name

tenant name (Max Size 63)

application

application

application_name

application name (Max Size 64)

epg

epg

epg_name

epg name (Max Size 64)

Command Mode: source interface ethernet : Configure monitor for ethernet access interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# source interface ethernet <ethernet> leaf <leaf Id>
(config-monitor-access-source)# filter tenant <tenant_name> application <application_name> epg <epg_name>

filter tenant <tenant_name> application <application_name> epg <epg_name>

Description: EPG filter

Syntax:

tenant

tenant

tenant_name

tenant name (Max Size 63)

application

application

application_name

application name (Max Size 64)

epg

epg

epg_name

epg name (Max Size 64)

Command Mode: source interface port-channel : Configure monitor for port-channel interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# source interface port-channel <port-channel list> leaf <leaf Id> [fex <fex Id>]
(config-monitor-access-source)# filter tenant <tenant_name> application <application_name> epg <epg_name>

filter tenant <tenant_name> application <application_name> epg <epg_name>

Description: EPG filter

Syntax:

tenant

tenant

tenant_name

tenant name (Max Size 63)

application

application

application_name

application name (Max Size 64)

epg

epg

epg_name

epg name (Max Size 64)

Command Mode: source interface vpc : Configure monitor for VPC interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# source interface vpc <vpc list> leaf <leaf Id1> <leaf Id2> [fex <fex Ids>]
(config-monitor-access-source)# filter tenant <tenant_name> application <application_name> epg <epg_name>

filter tenant bd

filter tenant <tenant_name> bd <bd_name>

Description: BD filter

Syntax:

tenant

tenant

tenant_name

tenant name

bd_name

BD name

Command Mode: source interface ethernet : Configure monitor for ethernet fabric interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor fabric session <session_name>
(config-monitor-fabric)# source interface ethernet <ethernet> switch <switch Id>
(config-monitor-fabric-source)# filter tenant <tenant_name> bd <bd_name>

filter tenant vrf

filter tenant <tenant_name> vrf <vrf_name>

Description: VRF filter

Syntax:

tenant

tenant

tenant_name

tenant name

vrf_name

vrf name

Command Mode: source interface ethernet : Configure monitor for ethernet fabric interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor fabric session <session_name>
(config-monitor-fabric)# source interface ethernet <ethernet> switch <switch Id>
(config-monitor-fabric-source)# filter tenant <tenant_name> vrf <vrf_name>

firewall-logging

firewall-logging server-group <WORD> [severity severity <severity-info>] [polling-interval <polling-interval>]

Description: Configure firewall-logging on AVS

Syntax:

server-group

Specify server group name

WORD

Logging server-group name (Max Size 64)

severity <severity-info>

(Optional) Specify severity info

polling-interval

(Optional) Specify polling interval time in seconds. Number range from=60 to=86400

Command Mode: configure-avs : Configure a VMware Domain as AVS (N1K) type

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-avs
(config-vmware-avs)# firewall-logging server-group <WORD> [severity severity <severity-info>] [polling-interval <polling-interval>]

firewall

firewall mode enabled|disabled|learning

Description: Configure firewall mode on AVS

Syntax:

mode

firewall mode

enabled

Enabled mode

disabled

Disabled mode

learning

Learning mode

Command Mode: configure-avs : Configure a VMware Domain as AVS (N1K) type

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-avs
(config-vmware-avs)# firewall mode enabled|disabled|learning

firmware-version

firmware-version <version>

Description: Set target firmware version

Syntax:

<version>

firmware version

Command Mode: controller-group : Controller Upgrade Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# controller-group
(config-firmware-controller)# firmware-version <version>

firmware-version <version>

Description: Set target firmware version

Syntax:

<version>

firmware version

Command Mode: switch-group : Create switch firmware upgrade policy

Command Path:

# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# switch-group <WORD>
(config-firmware-switch)# firmware-version <version>

firmware

firmware

Description: Firmware upgrade configuration Mode

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# firmware

firmware repository add

firmware repository add <WORD>

Description: Add firmware image to repository

Syntax:

WORD

Firmware image filename(absolute path)

Command Mode: exec : Exec Mode

Command Path:

# firmware repository add <WORD>

firmware repository delete

firmware repository delete <WORD>

Description: Remove firmware image from repository

Syntax:

WORD

Firmware image name

Command Mode: exec : Exec Mode

Command Path:

# firmware repository delete <WORD>

firmware upgrade controller-group

firmware upgrade controller-group

Description: Trigger controller-group upgrade

Command Mode: exec : Exec Mode

Command Path:

# firmware upgrade controller-group

firmware upgrade switch-group

firmware upgrade switch-group <WORD>

Description: Trigger switch-group upgrade

Syntax:

WORD

switch-group name (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# firmware upgrade switch-group <WORD>

first-file

first-file <FILENAME>

Description: First snapshot file name

Syntax:

FILENAME

First snapshot file name

Command Mode: snapshot rollback : Configuration rollback setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot rollback <WORD>
(config-rollback)# first-file <FILENAME>

first-name

first-name <WORD>

Description: Set the first name of the locally-authenticated user.

Syntax:

WORD

first name (Max Size 32)

Command Mode: username : Create a locally-authenticated user account

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# first-name <WORD>

format

format xml|short-txt|aml

Description: Configure the format of the message

Syntax:

xml

Xml

short-txt

Short-txt

aml

Aml

Command Mode: destination : Configure destination Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# destination-profile
(config-callhome-destnprof)# destination <WORD>
(config-callhome-destnprof-destn)# format xml|short-txt|aml

format xml|json

Description: Snapshot format: xml or json

Syntax:

xml

XML format

json

JSON format

Command Mode: snapshot export : Configuration export setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot export <WORD>
(config-export)# format xml|json

Chapter 7. G Commands

- graceful-restart-helper

- graceful-restart

- group

graceful-restart-helper

graceful-restart-helper

Description: Configure BGP Policy Graceful Restart Helper

Command Mode: template bgp timers : Configure Router BGP Timer Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template bgp timers <WORD> tenant <WORD>
(config-bgp-timers)# graceful-restart-helper

graceful-restart

graceful-restart helper-disable

Description: Disable OSPF Policy Graceful Restart Helper

Syntax:

helper-disable

disable Restart helper

Command Mode: template ospf vrf-policy : Configure Router OSPF Timer Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf vrf-policy <WORD> tenant <WORD>
(config-vrf-policy)# graceful-restart helper-disable

graceful-restart stalepath-time <NUMBER>

Description: Set BGP Policy Graceful Restart Timers

Syntax:

stalepath-time

Maximum time that BGP keeps stale routes from the restarting BGP peer

<1-3600>

Timer Value in Seconds. Number range from=1 to=3600

Command Mode: template bgp timers : Configure Router BGP Timer Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template bgp timers <WORD> tenant <WORD>
(config-bgp-timers)# graceful-restart stalepath-time <NUMBER>

group

group <WORD>

Description: Specify server groups

Syntax:

<WORD>

Server group name (Max Size 127)

Command Mode: aaa authentication login console : Configure console methods

Command Path:

# configure [['terminal', 't']]
(config)# aaa authentication login console
(config-console)# group <WORD>

group <WORD>

Description: Specify server groups

Syntax:

<WORD>

Server group name (Max Size 127)

Command Mode: aaa authentication login default : Configure default methods

Command Path:

# configure [['terminal', 't']]
(config)# aaa authentication login default
(config-default)# group <WORD>

group <WORD>

Description: Set provider group for login domain

Syntax:

<WORD>

Server group name (Max Size 127)

Command Mode: aaa authentication login domain : Configure domain methods

Command Path:

# configure [['terminal', 't']]
(config)# aaa authentication login domain <WORD>
(config-domain)# group <WORD>

Chapter 8. H Commands

- hello-interval

- http

- https

hello-interval

hello-interval <NUMBER>

Description: Set interval between hello packets that OSPF sends on the interface

Syntax:

<1-65535>

Interval in seconds. Number range from=1 to=65535

Command Mode: template ospf interface-policy : Configure OSPF Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf interface-policy <WORD> tenant <WORD>
(config-interface-policy)# hello-interval <NUMBER>

http

http

Description: HTTP communication policy group

Command Mode: comm-policy : Configure any communication policy, ssh/telnet/shellinabox/http/https

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# http

https

https

Description: HTTPS communication policy group

Command Mode: comm-policy : Configure any communication policy, ssh/telnet/shellinabox/http/https

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# https

Chapter 9. I Commands

- inband-mgmt

- inband-mgmt epg

- inherit

- inherit bgp address-family

- inherit bgp dampening

- inherit eigrp

- inherit ipv4

- inherit ipv6

- instance

- interface

- interface ethernet

- interface inband-mgmt0

- interface mgmt0

- interface port-channel

- interface vlan

- interface vpc

- ip

- ip address-range

- ip address

- ip address tenant application

- ip address tenant external-l2

- ip address tenant external-l3

- ip bandwidth

- ip bfd

- ip dhcp relay address tenant application

- ip dhcp relay address tenant external-l2

- ip dhcp relay address tenant external-l3

- ip distribute-list eigrp

- ip dscp

- ip hello-interval

- ip hold-interval

- ip igmp snooping fast-leave

- ip igmp snooping last-member-query-interval

- ip igmp snooping optimise-multicast-flood

- ip igmp snooping policy

- ip igmp snooping querier

- ip igmp snooping query-interval

- ip igmp snooping query-max-response-time

- ip igmp snooping startup-query-count

- ip igmp snooping startup-query-interval

- ip next-hop-self

- ip ospf authentication-key

- ip ospf authentication

- ip ospf bfd

- ip ospf cost

- ip ospf dead-interval

- ip ospf hello-interval

- ip ospf inherit

- ip ospf mtu-ignore

- ip ospf network

- ip ospf passive-interface

- ip ospf prefix-suppression

- ip ospf priority

- ip ospf retransmit-interval

- ip ospf transmit-delay

- ip passive-interface

- ip prefix-list

- ip prefix-list permit le

- ip router eigrp

- ip router ospf default

- ip shared address consumer

- ip shared address provider

- ip split-horizon

- ip summary-address eigrp

- ip throughput-delay

- ip ttl

- iprange

- ipv6

- ipv6 address-range

- ipv6 address

- ipv6 address tenant application

- ipv6 address tenant external-l2

- ipv6 address tenant external-l3

- ipv6 bandwidth

- ipv6 bfd

- ipv6 dhcp relay address tenant application

- ipv6 dhcp relay address tenant external-l2

- ipv6 dhcp relay address tenant external-l3

- ipv6 distribute-list eigrp

- ipv6 hello-interval

- ipv6 hold-interval

- ipv6 link-local

- ipv6 nd hop-limit

- ipv6 nd managed-config-flag

- ipv6 nd mtu

- ipv6 nd ns-interval

- ipv6 nd ns-retries

- ipv6 nd other-config-flag

- ipv6 nd policy

- ipv6 nd prefix

- ipv6 nd ra-interval

- ipv6 nd ra-lifetime

- ipv6 nd reachable-time

- ipv6 nd retrans-timer

- ipv6 nd suppress-ra-mtu

- ipv6 nd suppress-ra

- ipv6 next-hop-self

- ipv6 ospf bfd

- ipv6 ospf cost

- ipv6 ospf dead-interval

- ipv6 ospf hello-interval

- ipv6 ospf inherit

- ipv6 ospf mtu-ignore

- ipv6 ospf network

- ipv6 ospf passive-interface

- ipv6 ospf prefix-suppression

- ipv6 ospf priority

- ipv6 ospf retransmit-interval

- ipv6 ospf transmit-delay

- ipv6 passive-interface

- ipv6 router eigrp

- ipv6 router ospf default

- ipv6 shared address consumer

- ipv6 shared address provider

- ipv6 split-horizon

- ipv6 throughput-delay

- isis

- isolation

inband-mgmt

inband-mgmt epg <WORD>

Description: Enter Inside In-band management mode to modify inband properties or create new inband

Syntax:

epg

inband mgmt epg label, usage inband-mgmt epg

WORD

epg name for inband epg, it can be existing inband epg or new one

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# inband-mgmt epg <WORD>

inband-mgmt epg

inband-mgmt epg <WORD>

Description: Associate node to a Inband EPG

Syntax:

WORD

Inband End Point Group Name (Max Size 64)

Command Mode: interface inband-mgmt0 : Inband management interface

Command Path:

# configure [['terminal', 't']]
(config)# controller
(config-controller)# interface inband-mgmt0
(config-controller-if)# inband-mgmt epg <WORD>

inband-mgmt epg <WORD>

Description: Associate node to a Inband EPG

Syntax:

WORD

Inband End Point Group Name (Max Size 64)

Command Mode: interface inband-mgmt0 : Inband management interface

Command Path:

# configure [['terminal', 't']]
(config)# switch
(config-switch)# interface inband-mgmt0
(config-switch-if)# inband-mgmt epg <WORD>

inherit

inherit bfd ip|ipv6 <WORD>

Description: Inherit BFD Policy

Syntax:

bfd

ip

IPv4 Address

ipv6

IPv6 Address

WORD

Inherit a BFD Policy

Command Mode: template leaf-policy-group : Configure Leaf Policy Group

Command Path:

# configure [['terminal', 't']]
(config)# template leaf-policy-group <WORD>
(config-leaf-policy-group)# inherit bfd ip|ipv6 <WORD>

inherit route-profile <WORD>

Description: Inherit a policy template

Syntax:

route-profile

Configure route-profile for bridge-domain

WORD

Route profile name

Command Mode: match bridge-domain : Match subnets of a bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <>
(config-leaf-vrf-route-map-match)# inherit route-profile <WORD>

inherit route tag <WORD>

Description: Inherit a policy template

Syntax:

route

Policy template for routes

tag

Route tag policy template

WORD

Policy template name (Max Size 64)

Command Mode: vrf : Configure VRF parameters

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# inherit route tag <WORD>

inherit eigrp vrf-policy <WORD>

Description: Inherit EIGRP VRF Policy under this VRF

Syntax:

eigrp

Inherit EIGRP VRF Policy

vrf-policy

Inherit EIGRP VRF Policy

WORD

Policy name

Command Mode: address-family : EIGRP Policy Address Family

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router eigrp default
(config-eigrp)# vrf member tenant <WORD> vrf <WORD>
(config-eigrp-vrf)# address-family ipv4|ipv6 unicast
(config-address-family)# inherit eigrp vrf-policy <WORD>

inherit bgp timer <WORD>

Description: Inherit BGP Timer Template Policy under this VRF

Syntax:

bgp

Inherit BGP Timer Policy

timer

Inherit BGP Timer Policy

WORD

BGP Template Policy Name (Max Size 64)

Command Mode: vrf : Virtual Router Context

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# inherit bgp timer <WORD>

inherit bgp address-family

inherit bgp address-family <WORD>

Description: Inherit BGP Address Family Policy

Syntax:

WORD

BGP Address Family Policy Name (Max Size 64)

Command Mode: address-family : Configure an address-family

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# address-family ipv4|ipv6 unicast
(config-leaf-bgp-vrf-af)# inherit bgp address-family <WORD>

inherit bgp dampening

inherit bgp dampening <WORD>

Description: Inherit Route Profile with BGP Dampening Policy

Syntax:

WORD

Route Profile with BGP Dampening Policy Name (Max Size 64)

Command Mode: address-family : Configure an address-family

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# address-family ipv4|ipv6 unicast
(config-leaf-bgp-vrf-af)# inherit bgp dampening <WORD>

inherit eigrp

inherit eigrp ip|ipv6 interface-policy <WORD>

Description: Inherit EIGRP interface template policy

Syntax:

ip

Address Family IPv4

ipv6

Address Family IPv6

interface-policy

Associate the interface with an EIGRP interface policy

WORD

Policy name

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# inherit eigrp ip|ipv6 interface-policy <WORD>

inherit eigrp ip|ipv6 interface-policy <WORD>

Description: Inherit EIGRP interface template policy

Syntax:

ip

Address Family IPv4

ipv6

Address Family IPv6

interface-policy

Associate the interface with an EIGRP interface policy

WORD

Policy name

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# inherit eigrp ip|ipv6 interface-policy <WORD>

inherit ipv4

inherit ipv4 ospf vrf-policy <WORD>

Description: Inherit OSPF Template Policy under this VRF

Syntax:

ospf

Inherit OSPF Policy

vrf-policy

Inherit OSPF vrf-policy

WORD

OSPF Template Policy name (Max Size 64)

Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router ospf default
(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-ospf-vrf)# inherit ipv4 ospf vrf-policy <WORD>

inherit ipv6

inherit ipv6 nd <WORD>

Description: Inherit IPv6 Neighbor Discovery template policy

Syntax:

nd

Associate the interface with an IPv6 Neighbor Discovery policy

WORD

Policy name

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# inherit ipv6 nd <WORD>

inherit ipv6 nd <WORD>

Description: Inherit IPv6 Neighbor Discovery template policy

Syntax:

nd

Associate the interface with an IPv6 Neighbor Discovery policy

WORD

Policy name

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# inherit ipv6 nd <WORD>

inherit ipv6 ospf vrf-policy <WORD>

Description: Inherit OSPF Template Policy under this VRF

Syntax:

ospf

Inherit OSPF Policy

vrf-policy

Inherit OSPF vrf-policy

WORD

OSPF Template Policy name (Max Size 64)

Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router ospf default
(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-ospf-vrf)# inherit ipv6 ospf vrf-policy <WORD>

instance

instance <NUMBER> vlan <RANGE>

Description: Maps VLANs to an MST instance

Syntax:

<1-4094>

MST instance ID. Number range from=1 to=4094

vlan

Virtual LAN

RANGE

VLAN range. Ex.: 10-3000

Command Mode: region : STP MST region configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# spanning-tree mst configuration
(config-stp)# region <WORD>
(config-stp-region)# instance <NUMBER> vlan <RANGE>

interface

interface bridge-domain <WORD>

Description: Configuration for interface bridge-domain

Syntax:

bridge-domain

Name of the bridge-domain

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>

interface ethernet

Description: Provide a Range of Interfaces

Syntax:

ethernet

Configure Physical Interface

arg

Provide range of Interfaces

Command Mode: leaf-interface-group : Configure Leaf Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>
(config-leaf-if-group)# interface ethernet

interface ethernet

Description: Configure Ports on the Fex Interface Group

Syntax:

ethernet

Configure Physical Interface

arg

Provide range of Interfaces

Command Mode: fex-interface-group : Configure Fex Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# fex-profile <WORD>
(config-fex-profile)# fex-interface-group <WORD>
(config-fex-if-group)# interface ethernet

interface vpc <WORD> [fex <fex>]

Description: Provide VPC Name

Syntax:

vpc

VPC Interface

WORD

VPC Name (Max Size 64)

fex

(Optional) Fex Id. Number range from=101 to=164

Command Mode: vpc context : Enter vpc context

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]

interface ethernet

interface ethernet <ethernet> leaf <leaf-id>

Description: Configure Physical Ethernet Port as a Cluster Member Interface

Syntax:

<ethernet>

List of ethernet itfs

leaf

Leaf ID that connects to cluster ethernet interface on (physical) device.

<leaf-id>

Leaf ID that connects to cluster ethernet interface on (physical) device.

Command Mode: member : Configure Cluster Interface Member

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]
(config-cluster)# cluster-interface <WORD> [vlan <NUMBER>]
(config-cluster-interface)# member device <WORD> device-interface <WORD>
(config-member)# interface ethernet <ethernet> leaf <leaf-id>

interface ethernet <ifRange>

Description: Ethernet IEEE 802.3z

Syntax:

<ifRange>

interface Range

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>

interface inband-mgmt0

interface inband-mgmt0

Description: Inband management interface

Command Mode: controller : Configure Controller Node

Command Path:

# configure [['terminal', 't']]
(config)# controller
(config-controller)# interface inband-mgmt0

interface inband-mgmt0

Description: Inband management interface

Command Mode: switch : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# switch
(config-switch)# interface inband-mgmt0

interface mgmt0

interface mgmt0

Description: Out of band management interface

Command Mode: controller : Configure Controller Node

Command Path:

# configure [['terminal', 't']]
(config)# controller
(config-controller)# interface mgmt0

interface mgmt0

Description: Out of band management interface

Command Mode: switch : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# switch
(config-switch)# interface mgmt0

interface port-channel

interface port-channel <port-channel-name> leaf <NUMBER> [fex <fex-id>]

Description: Configure Port Channel as a Cluster Member Interface

Syntax:

<port-channel-name>

Name of the port-channel

leaf

Leaf Id for the port-channel

NUMBER

Leaf Id for the port channel.. Number range from=0 to=9223372036854775807

<fex-id>

(Optional) Fex ID that connects to cluster interface interface on (physical) device.

Command Mode: member : Configure Cluster Interface Member

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]
(config-cluster)# cluster-interface <WORD> [vlan <NUMBER>]
(config-cluster-interface)# member device <WORD> device-interface <WORD>
(config-member)# interface port-channel <port-channel-name> leaf <NUMBER> [fex <fex-id>]

interface port-channel <WORD> [fex <fex>]

Description: Port Channel interface

Syntax:

WORD

Port-Channel Name (Max Size 64)

fex

(Optional) Fex Id. Number range from=101 to=164

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]

interface vlan

interface vlan <1-4094>

Description: Vlan interface

Syntax:

<1-4094>

Vlan interface number

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>

interface vpc

interface vpc <vpc-name> leaf <NUMBER> <NUMBER> [fex fex <Ids>]

Description: Configure monitor for VPC interfaces

Syntax:

<vpc-name>

VPC port-channel group name

leaf

leaf

NUMBER

First leaf member of the Pair. Number range from=0 to=9223372036854775807

NUMBER

Second leaf member of the Pair. Number range from=0 to=9223372036854775807

fex <Ids>

(Optional) paired fex Ids

Command Mode: member : Configure Cluster Interface Member

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]
(config-cluster)# cluster-interface <WORD> [vlan <NUMBER>]
(config-cluster-interface)# member device <WORD> device-interface <WORD>
(config-member)# interface vpc <vpc-name> leaf <NUMBER> <NUMBER> [fex fex <Ids>]

ip

ip route <A.B.C.D/LEN> <ipAddress|null> <ZeroorPref> <BfdorPref>

Description: Configure IP features

Syntax:

route

Route information

A.B.C.D/LEN

IP prefix and network mask length in format x.x.x.x/m

ipAddress|null

<ZeroorPref>

<BfdorPref>

Command Mode: vrf : Configure VRF parameters

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# ip route <A.B.C.D/LEN> <ipAddress|null> <ZeroorPref> <BfdorPref>

ip address-range

ip address-range <A.B.C.D/LEN> gateway <A.B.C.D>

Description: Configure IP and gateway features

Syntax:

A.B.C.D/LEN

IP Address and network mask length in format x.x.x.x/m

gateway

Configure gateway address on interface

A.B.C.D

Network mask length in format x.x.x.x

Command Mode: interface mgmt0 : Out of band management interface

Command Path:

# configure [['terminal', 't']]
(config)# controller
(config-controller)# interface mgmt0
(config-controller-if)# ip address-range <A.B.C.D/LEN> gateway <A.B.C.D>

ip address-range <A.B.C.D/LEN> gateway <A.B.C.D>

Description: Configure IP and gateway features

Syntax:

A.B.C.D/LEN

IP address and network mask length in format x.x.x.x/m

gateway

Configure gateway address on interface

A.B.C.D

Network mask length in format x.x.x.x

Command Mode: interface inband-mgmt0 : Inband management interface

Command Path:

# configure [['terminal', 't']]
(config)# controller
(config-controller)# interface inband-mgmt0
(config-controller-if)# ip address-range <A.B.C.D/LEN> gateway <A.B.C.D>

ip address-range <A.B.C.D/LEN> gateway <A.B.C.D>

Description: Configure IP and gateway features

Syntax:

A.B.C.D/LEN

IP Address and network mask length in format x.x.x.x/m

gateway

Configure gateway address on interface

A.B.C.D

Network mask length in format x.x.x.x

Command Mode: interface mgmt0 : Out of band management interface

Command Path:

# configure [['terminal', 't']]
(config)# switch
(config-switch)# interface mgmt0
(config-switch-if)# ip address-range <A.B.C.D/LEN> gateway <A.B.C.D>

ip address-range <A.B.C.D> gateway <A.B.C.D>

Description: Configure IP and gateway features

Syntax:

A.B.C.D

IP address and network mask length in format x.x.x.x/m

gateway

Configure gateway address on interface

A.B.C.D

Network mask length in format x.x.x.x

Command Mode: interface inband-mgmt0 : Inband management interface

Command Path:

# configure [['terminal', 't']]
(config)# switch
(config-switch)# interface inband-mgmt0
(config-switch-if)# ip address-range <A.B.C.D> gateway <A.B.C.D>

ip address

ip address <A.B.C.D/LEN> [scope <scope>] [secondary] [multi-site] [snooping-querier]

Description: Define an IPv4 subnet to be exported by the BD

Syntax:

A.B.C.D/LEN

IP prefix and network mask length in format x.x.x.x/m

scope

(Optional) Scope of the address among ['public', 'private']

secondary

(Optional) Set the address as secondary address

multi-site

(Optional) Set the address as multi-site address

snooping-querier

(Optional) Tell the address to be used by IGMP Snooping querier functionality if enabled

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ip address <A.B.C.D/LEN> [scope <scope>] [secondary] [multi-site] [snooping-querier]

ip address <A.B.C.D/LEN> [secondary]

Description: Configure IP address on interface

Syntax:

A.B.C.D/LEN

IP prefix and network mask length in format x.x.x.x/m

secondary

(Optional) Configure additional IP addresses on interface

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip address <A.B.C.D/LEN> [secondary]

ip address <A.B.C.D/LEN> [secondary]

Description: Configure IP address on interface

Syntax:

A.B.C.D/LEN

IP prefix and network mask length in format x.x.x.x/m

secondary

(Optional) Configure IP Address as Secondary IP

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip address <A.B.C.D/LEN> [secondary]

ip address <A.B.C.D/LEN> gateway <A.B.C.D>

Description: Configure IP and gateway features

Syntax:

A.B.C.D/LEN

IP prefix and network mask length in format x.x.x.x/m

gateway

Configure gateway address on interface

A.B.C.D

Network mask length in format x.x.x.x

Command Mode: interface mgmt0 : Out of band management interface

Command Path:

# configure [['terminal', 't']]
(config)# controller
(config-controller)# interface mgmt0
(config-controller-if)# ip address <A.B.C.D/LEN> gateway <A.B.C.D>

ip address <A.B.C.D/LEN> gateway <A.B.C.D>

Description: Configure IP and gateway features

Syntax:

A.B.C.D/LEN

IP address and network mask length in format x.x.x.x/m

gateway

Configure gateway address on interface

A.B.C.D

Network mask length in format x.x.x.x

Command Mode: interface inband-mgmt0 : Inband management interface

Command Path:

# configure [['terminal', 't']]
(config)# controller
(config-controller)# interface inband-mgmt0
(config-controller-if)# ip address <A.B.C.D/LEN> gateway <A.B.C.D>

ip address <A.B.C.D/LEN> gateway <A.B.C.D>

Description: Configure IP and gateway features

Syntax:

A.B.C.D/LEN

IP prefix and network mask length in format x.x.x.x/m

gateway

Configure gateway address on interface

A.B.C.D

Network mask length in format x.x.x.x

Command Mode: interface mgmt0 : Out of band management interface

Command Path:

# configure [['terminal', 't']]
(config)# switch
(config-switch)# interface mgmt0
(config-switch-if)# ip address <A.B.C.D/LEN> gateway <A.B.C.D>

ip address <A.B.C.D/LEN> gateway <A.B.C.D>

Description: Configure IP and gateway features

Syntax:

A.B.C.D/LEN

IP address and network mask length in format x.x.x.x/m

gateway

Configure gateway address on interface

A.B.C.D

Network mask length in format x.x.x.x

Command Mode: interface inband-mgmt0 : Inband management interface

Command Path:

# configure [['terminal', 't']]
(config)# switch
(config-switch)# interface inband-mgmt0
(config-switch-if)# ip address <A.B.C.D/LEN> gateway <A.B.C.D>

ip address tenant application

ip address <A.B.C.D> tenant <WORD> application <WORD> epg <WORD>

Description: Add a new server relay address under an AEPg

Syntax:

A.B.C.D

IP address in format i.i.i.i

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

WORD

Application hosting the EPG (Max Size 64)

epg

AEPg behind which the DHCP server sits

WORD

AEPg behind which the DHCP server sits (Max Size 64)

Command Mode: template dhcp relay : Create a DHCP Relay policy

Command Path:

# configure [['terminal', 't']]
(config)# template dhcp relay policy <WORD>
(config-template-dhcp-relay)# ip address <A.B.C.D> tenant <WORD> application <WORD> epg <WORD>

ip address <A.B.C.D> tenant <WORD> application <WORD> epg <WORD>

Description: Add a new server relay address under an AEPg

Syntax:

A.B.C.D

IP address in format i.i.i.i

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

WORD

Application hosting the EPG (Max Size 64)

epg

AEPg behind which the DHCP server sits

WORD

AEPg behind which the DHCP server sits (Max Size 64)

Command Mode: template dhcp relay : Create a DHCP Relay policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template dhcp relay policy <WORD>
(config-tenant-template-dhcp-relay)# ip address <A.B.C.D> tenant <WORD> application <WORD> epg <WORD>

ip address tenant external-l2

ip address <A.B.C.D> tenant <WORD> external-l2 epg <WORD>

Description: Add a new server relay address under a L2 External EPG

Syntax:

A.B.C.D

IP address in format i.i.i.i

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

epg

epg keyword

WORD

l2 external EPG behind which the DHCP server sits (Max Size 64)

Command Mode: template dhcp relay : Create a DHCP Relay policy

Command Path:

# configure [['terminal', 't']]
(config)# template dhcp relay policy <WORD>
(config-template-dhcp-relay)# ip address <A.B.C.D> tenant <WORD> external-l2 epg <WORD>

ip address <A.B.C.D> tenant <WORD> external-l2 epg <WORD>

Description: Add a new server relay address under a L2 External EPG

Syntax:

A.B.C.D

IP address in format i.i.i.i

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

epg

epg keyword

WORD

l2 external EPG behind which the DHCP server sits (Max Size 64)

Command Mode: template dhcp relay : Create a DHCP Relay policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template dhcp relay policy <WORD>
(config-tenant-template-dhcp-relay)# ip address <A.B.C.D> tenant <WORD> external-l2 epg <WORD>

ip address tenant external-l3

ip address <A.B.C.D> tenant <WORD> external-l3 epg <WORD>

Description: Add a new server relay address under a L3 External EPG

Syntax:

A.B.C.D

IP address in format i.i.i.i

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

epg

EPG keyword

WORD

l3 external EPG behind which the DHCP server sits (Max Size 64)

Command Mode: template dhcp relay : Create a DHCP Relay policy

Command Path:

# configure [['terminal', 't']]
(config)# template dhcp relay policy <WORD>
(config-template-dhcp-relay)# ip address <A.B.C.D> tenant <WORD> external-l3 epg <WORD>

ip address <A.B.C.D> tenant <WORD> external-l3 epg <WORD>

Description: Add a new server relay address under a L3 External EPG

Syntax:

A.B.C.D

IP address in format i.i.i.i

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

epg

EPG keyword

WORD

l3 external EPG behind which the DHCP server sits (Max Size 64)

Command Mode: template dhcp relay : Create a DHCP Relay policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template dhcp relay policy <WORD>
(config-tenant-template-dhcp-relay)# ip address <A.B.C.D> tenant <WORD> external-l3 epg <WORD>

ip bandwidth

ip bandwidth eigrp default <NUMBER>

Description: Set EIGRP bandwidth

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<0-2560000000>

bandwidth in kbps. Number range from=0 to=2560000000

Command Mode: template eigrp interface-policy : Configure EIGRP Interface policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template eigrp interface-policy <WORD> tenant <WORD>
(config-template-eigrp-if-pol)# ip bandwidth eigrp default <NUMBER>

ip bandwidth eigrp default <NUMBER>

Description: Set EIGRP bandwidth

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<0-2560000000>

bandwidth in kbps. Number range from=0 to=2560000000

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip bandwidth eigrp default <NUMBER>

ip bandwidth eigrp default <NUMBER>

Description: Set EIGRP bandwidth

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<0-2560000000>

bandwidth in kbps. Number range from=0 to=2560000000

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip bandwidth eigrp default <NUMBER>

ip bfd

ip bfd enable

Description: Enable Bidirectional Forwarding Detection

Syntax:

enable

Enable BFD

Command Mode: template eigrp interface-policy : Configure EIGRP Interface policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template eigrp interface-policy <WORD> tenant <WORD>
(config-template-eigrp-if-pol)# ip bfd enable

ip bfd eigrp enable

Description: Enable EIGRP Bidirectional Forwarding Detection

Syntax:

eigrp

EIGRP

enable

Enable BFD

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip bfd eigrp enable

ip bfd eigrp enable

Description: Enable EIGRP Bidirectional Forwarding Detection

Syntax:

eigrp

EIGRP

enable

Enable BFD

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip bfd eigrp enable

ip dhcp relay address tenant application

ip dhcp relay address <A.B.C.D> tenant <WORD> application <WORD> epg <WORD>

Description: Add a new server relay address under an AEPg

Syntax:

A.B.C.D

IP address in format i.i.i.i

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

WORD

Application hosting the EPG (Max Size 64)

epg

AEPg behind which the DHCP server sits

WORD

AEPg behind which the DHCP server sits (Max Size 64)

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ip dhcp relay address <A.B.C.D> tenant <WORD> application <WORD> epg <WORD>

ip dhcp relay address tenant external-l2

ip dhcp relay address <A.B.C.D> tenant <WORD> external-l2 epg <WORD>

Description: Add a new server relay address under a L2 External EPG

Syntax:

A.B.C.D

IP address in format i.i.i.i

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

epg

epg keyword

WORD

l2 external EPG behind which the DHCP server sits (Max Size 64)

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ip dhcp relay address <A.B.C.D> tenant <WORD> external-l2 epg <WORD>

ip dhcp relay address tenant external-l3

ip dhcp relay address <A.B.C.D> tenant <WORD> external-l3 epg <WORD>

Description: Add a new server relay address under a L3 External EPG

Syntax:

A.B.C.D

IP address in format i.i.i.i

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

epg

EPG keyword

WORD

l3 external EPG behind which the DHCP server sits (Max Size 64)

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ip dhcp relay address <A.B.C.D> tenant <WORD> external-l3 epg <WORD>

ip distribute-list eigrp

ip distribute-list eigrp default route-map <WORD> out

Description: Configure distribute-list EIGRP route-map

Syntax:

default

EIGRP default instance

route-map

route map

WORD

Route-map name (Max Size 64)

out

out

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip distribute-list eigrp default route-map <WORD> out

ip distribute-list eigrp default route-map <WORD> out

Description: Configure distribute-list EIGRP Policies

Syntax:

default

EIGRP default instance

route-map

route map

WORD

Route-map name (Max Size 64)

out

out

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip distribute-list eigrp default route-map <WORD> out

ip dscp

ip dscp <dscp>

Description: dscp

Syntax:

dscp

DSCP code or value

Command Mode: destination tenant : Configure monitor remote destination

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>
(config-monitor-access-dest)# ip dscp <dscp>

ip dscp <dscp>

Description: dscp

Syntax:

dscp

DSCP code or value

Command Mode: destination : Configure monitor remote destination

Command Path:

# configure [['terminal', 't']]
(config)# monitor fabric session <session_name>
(config-monitor-fabric)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>
(config-monitor-fabric-dest)# ip dscp <dscp>

ip dscp <dscp>

Description: dscp

Syntax:

dscp

DSCP code or value

Command Mode: destination : Configure monitor remote destination

Command Path:

# configure [['terminal', 't']]
(config)# monitor tenant <tenant_name> session <session_name>
(config-monitor-tenant)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>
(config-monitor-tenant-dest)# ip dscp <dscp>

ip dscp <dscp>

Description: Configure DSCP

Syntax:

<dscp>

<dscp>

Command Mode: destination destip : Configure monitor remote destination

Command Path:

# configure [['terminal', 't']]
(config)# monitor virtual session <WORD>
(config-monitor-virtual)# destination destip <A.B.C.D>
(config-monitor-virtual-remote-dest)# ip dscp <dscp>

ip hello-interval

ip hello-interval eigrp default <NUMBER>

Description: Set EIGRP Hello interval time

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<1-65535>

Hello interval time in seconds. Number range from=1 to=65535

Command Mode: template eigrp interface-policy : Configure EIGRP Interface policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template eigrp interface-policy <WORD> tenant <WORD>
(config-template-eigrp-if-pol)# ip hello-interval eigrp default <NUMBER>

ip hello-interval eigrp default <NUMBER>

Description: Set EIGRP Hello interval time

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<1-65535>

Hello interval time in seconds. Number range from=1 to=65535

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip hello-interval eigrp default <NUMBER>

ip hello-interval eigrp default <NUMBER>

Description: Set EIGRP Hello interval time

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<1-65535>

Hello interval time in seconds. Number range from=1 to=65535

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip hello-interval eigrp default <NUMBER>

ip hold-interval

ip hold-interval eigrp default <NUMBER>

Description: Set EIGRP Hold interval time

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<1-65535>

Hold interval time in seconds. Number range from=1 to=65535

Command Mode: template eigrp interface-policy : Configure EIGRP Interface policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template eigrp interface-policy <WORD> tenant <WORD>
(config-template-eigrp-if-pol)# ip hold-interval eigrp default <NUMBER>

ip hold-interval eigrp default <NUMBER>

Description: Set EIGRP Hold interval time

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<1-65535>

Hold interval time in seconds. Number range from=1 to=65535

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip hold-interval eigrp default <NUMBER>

ip hold-interval eigrp default <NUMBER>

Description: Set EIGRP Hold interval time

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<1-65535>

Hold interval time in seconds. Number range from=1 to=65535

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip hold-interval eigrp default <NUMBER>

ip igmp snooping fast-leave

ip igmp snooping fast-leave

Description: Enable IP IGMP Snooping fast leave processing

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ip igmp snooping fast-leave

ip igmp snooping fast-leave

Description: Enable IP IGMP Snooping fast leave processing

Command Mode: template ip igmp snooping policy : Create an IGMP snooping policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ip igmp snooping policy <WORD>
(config-tenant-template-ip-igmp-snooping)# ip igmp snooping fast-leave

ip igmp snooping last-member-query-interval

ip igmp snooping last-member-query-interval <NUMBER>

Description: Change the IP IGMP snooping last member query interval param

Syntax:

<1-25>

Last Memeber Query Interval Value. Number range from=1 to=25

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ip igmp snooping last-member-query-interval <NUMBER>

ip igmp snooping last-member-query-interval <NUMBER>

Description: Change the IP IGMP snooping last member query interval param

Syntax:

<1-25>

Last Memeber Query Interval Value. Number range from=1 to=25

Command Mode: template ip igmp snooping policy : Create an IGMP snooping policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ip igmp snooping policy <WORD>
(config-tenant-template-ip-igmp-snooping)# ip igmp snooping last-member-query-interval <NUMBER>

ip igmp snooping optimise-multicast-flood

ip igmp snooping optimise-multicast-flood

Description: Enable IP IGMP Snooping multicast flood optimization

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ip igmp snooping optimise-multicast-flood

ip igmp snooping optimise-multicast-flood

Description: Enable IP IGMP Snooping multicast flood optimization

Command Mode: template ip igmp snooping policy : Create an IGMP snooping policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ip igmp snooping policy <WORD>
(config-tenant-template-ip-igmp-snooping)# ip igmp snooping optimise-multicast-flood

ip igmp snooping policy

ip igmp snooping policy <WORD>

Description: Associate the BD with an IGMP snooping policy

Syntax:

WORD

Name of the IGMP snooping policy to attach (Max Size 64)

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ip igmp snooping policy <WORD>

ip igmp snooping querier

ip igmp snooping querier

Description: Enable IP IGMP Snooping querier processing

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ip igmp snooping querier

ip igmp snooping querier

Description: Enable IP IGMP Snooping querier processing

Command Mode: template ip igmp snooping policy : Create an IGMP snooping policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ip igmp snooping policy <WORD>
(config-tenant-template-ip-igmp-snooping)# ip igmp snooping querier

ip igmp snooping query-interval

ip igmp snooping query-interval <NUMBER>

Description: Change the IP IGMP snooping query interval param

Syntax:

<1-18000>

Query Interval Value. Number range from=1 to=18000

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ip igmp snooping query-interval <NUMBER>

ip igmp snooping query-interval <NUMBER>

Description: Change the IP IGMP snooping query interval param

Syntax:

<1-18000>

Query Interval Value. Number range from=1 to=18000

Command Mode: template ip igmp snooping policy : Create an IGMP snooping policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ip igmp snooping policy <WORD>
(config-tenant-template-ip-igmp-snooping)# ip igmp snooping query-interval <NUMBER>

ip igmp snooping query-max-response-time

ip igmp snooping query-max-response-time <NUMBER>

Description: Change the IP IGMP snooping max query response time

Syntax:

<1-25>

Query Max Response Time. Number range from=1 to=25

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ip igmp snooping query-max-response-time <NUMBER>

ip igmp snooping query-max-response-time <NUMBER>

Description: Change the IP IGMP snooping max query response time

Syntax:

<1-25>

Query Max Response Time. Number range from=1 to=25

Command Mode: template ip igmp snooping policy : Create an IGMP snooping policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ip igmp snooping policy <WORD>
(config-tenant-template-ip-igmp-snooping)# ip igmp snooping query-max-response-time <NUMBER>

ip igmp snooping startup-query-count

ip igmp snooping startup-query-count <NUMBER>

Description: Change the IP IGMP snooping number of initial queries to send

Syntax:

<1-10>

Start Query Count. Number range from=1 to=10

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ip igmp snooping startup-query-count <NUMBER>

ip igmp snooping startup-query-count <NUMBER>

Description: Change the IP IGMP snooping number of initial queries to send

Syntax:

<1-10>

Start Query Count. Number range from=1 to=10

Command Mode: template ip igmp snooping policy : Create an IGMP snooping policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ip igmp snooping policy <WORD>
(config-tenant-template-ip-igmp-snooping)# ip igmp snooping startup-query-count <NUMBER>

ip igmp snooping startup-query-interval

ip igmp snooping startup-query-interval <NUMBER>

Description: Change the IP IGMP snooping time for sending initial queries

Syntax:

<1-18000>

Start Query Interval Value. Number range from=1 to=18000

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ip igmp snooping startup-query-interval <NUMBER>

ip igmp snooping startup-query-interval <NUMBER>

Description: Change the IP IGMP snooping time for sending initial queries

Syntax:

<1-18000>

Start Query Interval Value. Number range from=1 to=18000

Command Mode: template ip igmp snooping policy : Create an IGMP snooping policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ip igmp snooping policy <WORD>
(config-tenant-template-ip-igmp-snooping)# ip igmp snooping startup-query-interval <NUMBER>

ip next-hop-self

ip next-hop-self eigrp default

Description: Set the next-hop-self flag

Syntax:

eigrp

EIGRP

default

EIGRP default instance

Command Mode: template eigrp interface-policy : Configure EIGRP Interface policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template eigrp interface-policy <WORD> tenant <WORD>
(config-template-eigrp-if-pol)# ip next-hop-self eigrp default

ip next-hop-self eigrp default

Description: Set EIGRP next-hop-self flag

Syntax:

eigrp

EIGRP

default

EIGRP default instance

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip next-hop-self eigrp default

ip next-hop-self eigrp default

Description: Set EIGRP next-hop-self flag

Syntax:

eigrp

EIGRP

default

EIGRP default instance

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip next-hop-self eigrp default

ip ospf authentication-key

ip ospf authentication-key <WORD>

Description: Set OSPF authentication key

Syntax:

WORD

OSPF authentication key

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip ospf authentication-key <WORD>

ip ospf authentication-key <WORD>

Description: Set OSPF authentication key

Syntax:

WORD

OSPF authentication key

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip ospf authentication-key <WORD>

ip ospf authentication

ip ospf authentication md5|none|simple

Description: Set the OSPF authentication type

Syntax:

md5

MD5 authentication

none

No authentication

simple

Simple authentication

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip ospf authentication md5|none|simple

ip ospf authentication md5|none|simple

Description: Set the OSPF authentication type

Syntax:

md5

MD5 authentication

none

No authentication

simple

Simple authentication

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip ospf authentication md5|none|simple

ip ospf bfd

ip ospf bfd enable

Description: Enable Bidirectional Forwarding Detection

Syntax:

enable

Enable BFD

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip ospf bfd enable

ip ospf bfd enable

Description: Enable Bidirectional Forwarding Detection

Syntax:

enable

Enable BFD

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip ospf bfd enable

ip ospf cost

ip ospf cost <NUMBER>

Description: Set OSPF cost for the interface

Syntax:

<0-65535>

OSPF cost. Number range from=0 to=65535

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip ospf cost <NUMBER>

ip ospf cost <NUMBER>

Description: Set OSPF cost for the interface

Syntax:

<0-65535>

OSPF cost. Number range from=0 to=65535

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip ospf cost <NUMBER>

ip ospf dead-interval

ip ospf dead-interval <NUMBER>

Description: Set the interval between hello packets from a neighbor before the router declares the neighbor as down

Syntax:

<1-65535>

Interval in seconds. Number range from=1 to=65535

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip ospf dead-interval <NUMBER>

ip ospf dead-interval <NUMBER>

Description: Set the interval between hello packets from a neighbor before the router declares the neighbor as down

Syntax:

<1-65535>

Interval in seconds. Number range from=1 to=65535

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip ospf dead-interval <NUMBER>

ip ospf hello-interval

ip ospf hello-interval <NUMBER>

Description: Set interval between hello packets that OSPF sends on the interface

Syntax:

<1-65535>

Interval in seconds. Number range from=1 to=65535

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip ospf hello-interval <NUMBER>

ip ospf hello-interval <NUMBER>

Description: Set interval between hello packets that OSPF sends on the interface

Syntax:

<1-65535>

Interval in seconds. Number range from=1 to=65535

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip ospf hello-interval <NUMBER>

ip ospf inherit

ip ospf inherit interface-policy <WORD> tenant <WORD>

Description: Inherit OSPF Template Policy under this VRF

Syntax:

interface-policy

Inherit OSPF interface-policy

WORD

OSPF Template Policy name (Max Size 64)

tenant

tenant name

WORD

Tenant name (Max Size 63)

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip ospf inherit interface-policy <WORD> tenant <WORD>

ip ospf inherit interface-policy <WORD> tenant <WORD>

Description: Inherit OSPF Template Policy under this VRF

Syntax:

interface-policy

Inherit OSPF interface-policy

WORD

OSPF Template Policy name (Max Size 64)

tenant

tenant name

WORD

Tenant name (Max Size 63)

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip ospf inherit interface-policy <WORD> tenant <WORD>

ip ospf mtu-ignore

ip ospf mtu-ignore

Description: Set OSPF Interface Policy Controls

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip ospf mtu-ignore

ip ospf mtu-ignore

Description: Set OSPF Interface Policy Controls

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip ospf mtu-ignore

ip ospf network

ip ospf network bcast|p2p|unspecified

Description: Set OSPF interface policy network type

Syntax:

bcast

The OSPF interface policy network type. OSPF supports point-to-point and broadcast.

p2p

The OSPF interface policy network type. OSPF supports point-to-point and broadcast.

unspecified

The OSPF interface policy network type. OSPF supports point-to-point and broadcast.

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip ospf network bcast|p2p|unspecified

ip ospf network bcast|p2p|unspecified

Description: Set OSPF interface policy network type

Syntax:

bcast

The OSPF interface policy network type. OSPF supports point-to-point and broadcast.

p2p

The OSPF interface policy network type. OSPF supports point-to-point and broadcast.

unspecified

The OSPF interface policy network type. OSPF supports point-to-point and broadcast.

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip ospf network bcast|p2p|unspecified

ip ospf passive-interface

ip ospf passive-interface

Description: Set OSPF Interface Policy Controls

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip ospf passive-interface

ip ospf passive-interface

Description: Set OSPF Interface Policy Controls

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip ospf passive-interface

ip ospf prefix-suppression

ip ospf prefix-suppression disable|enable|inherit

Description: Set prefix suppression

Syntax:

disable

The OSPF interface prefix suppression.

enable

The OSPF interface prefix suppression.

inherit

The OSPF interface prefix suppression.

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip ospf prefix-suppression disable|enable|inherit

ip ospf prefix-suppression disable|enable|inherit

Description: Set prefix suppression

Syntax:

disable

The OSPF interface prefix suppression.

enable

The OSPF interface prefix suppression.

inherit

The OSPF interface prefix suppression.

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip ospf prefix-suppression disable|enable|inherit

ip ospf priority

ip ospf priority <NUMBER>

Description: Set OSPF interface priority used to determine the designated router (DR) on a specific network

Syntax:

<0-255>

OSPF priority. Number range from=0 to=255

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip ospf priority <NUMBER>

ip ospf priority <NUMBER>

Description: Set OSPF interface priority used to determine the designated router (DR) on a specific network

Syntax:

<0-255>

OSPF priority. Number range from=0 to=255

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip ospf priority <NUMBER>

ip ospf retransmit-interval

ip ospf retransmit-interval <NUMBER>

Description: Set OSPF Policy Graceful Restart Timers

Syntax:

<1-65535>

Interval in seconds. Number range from=1 to=65535

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip ospf retransmit-interval <NUMBER>

ip ospf retransmit-interval <NUMBER>

Description: Set OSPF Policy Graceful Restart Timers

Syntax:

<1-65535>

Interval in seconds. Number range from=1 to=65535

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip ospf retransmit-interval <NUMBER>

ip ospf transmit-delay

ip ospf transmit-delay <NUMBER>

Description: Set the delay time needed to send an LSA update packet.

Syntax:

<1-450>

Delay in seconds. Number range from=1 to=450

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip ospf transmit-delay <NUMBER>

ip ospf transmit-delay <NUMBER>

Description: Set the delay time needed to send an LSA update packet.

Syntax:

<1-450>

Delay in seconds. Number range from=1 to=450

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip ospf transmit-delay <NUMBER>

ip passive-interface

ip passive-interface eigrp default

Description: Set the passive-interface flag

Syntax:

eigrp

EIGRP

default

EIGRP default instance

Command Mode: template eigrp interface-policy : Configure EIGRP Interface policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template eigrp interface-policy <WORD> tenant <WORD>
(config-template-eigrp-if-pol)# ip passive-interface eigrp default

ip passive-interface eigrp default

Description: Set EIGRP passive-interface flag

Syntax:

eigrp

EIGRP

default

EIGRP default instance

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip passive-interface eigrp default

ip passive-interface eigrp default

Description: Set EIGRP passive-interface flag

Syntax:

eigrp

EIGRP

default

EIGRP default instance

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip passive-interface eigrp default

ip prefix-list

ip prefix-list <WORD> permit <A.B.C.D/LEN | A:B::C:D/LEN>

Description: Build a prefix-list

Syntax:

WORD

Name of prefix-list (Max Size 64)

permit

Specify routes to forward

A.B.C.D/LEN | A:B::C:D/LEN

IP prefix network/length, e.g., 35.0.0.0/8 or 2001::/64

Command Mode: route-map : Create route-map or enter route-map command mode

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# ip prefix-list <WORD> permit <A.B.C.D/LEN | A:B::C:D/LEN>

ip prefix-list permit le

ip prefix-list <WORD> permit <A.B.C.D/LEN | A:B::C:D/LEN> le <32>

Description: Maximum prefix length to be matched

Syntax:

WORD

Name of prefix-list (Max Size 64)

permit

Specify routes to forward

A.B.C.D/LEN | A:B::C:D/LEN

IP prefix network/length, e.g., 35.0.0.0/8 or 2001::/64

32

Maximum prefix length

Command Mode: route-map : Create route-map or enter route-map command mode

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# ip prefix-list <WORD> permit <A.B.C.D/LEN | A:B::C:D/LEN> le <32>

ip router eigrp

ip router eigrp default

Description: Configure Router EIGRP Policies

Syntax:

default

EIGRP default instance

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip router eigrp default

ip router eigrp default

Description: Configure EIGRP default interface

Syntax:

default

EIGRP default instance

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip router eigrp default

ip router ospf default

ip router ospf default area <A.B.C.D|NUMBER>

Description: Process tag

Syntax:

area

Area associated with interface

A.B.C.D|NUMBER

OSPF area Id

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip router ospf default area <A.B.C.D|NUMBER>

ip router ospf default area <A.B.C.D|NUMBER>

Description: Process tag

Syntax:

area

Area associated with interface

A.B.C.D|NUMBER

OSPF area Id

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip router ospf default area <A.B.C.D|NUMBER>

ip shared address consumer

ip shared address <A.B.C.D/LEN> consumer application any epg any

Description: Shared consumed service

Syntax:

address

IPv4 subnet

A.B.C.D/LEN

IP prefix and network mask length in format x.x.x.x/m

application

application keyword

any

any application

epg

epg keyword

any

any EPG

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ip shared address <A.B.C.D/LEN> consumer application any epg any

ip shared address provider

ip shared address <A.B.C.D/LEN> provider application <WORD> epg <WORD> [scope <scope>]

Description: Shared provider service

Syntax:

address

IPv4 subnet

A.B.C.D/LEN

IP prefix and network mask length in format x.x.x.x/m

application

application keyword

WORD

Application Name (Max Size 64)

epg

epg keyword

WORD

Application EPG (Max Size 64)

scope

(Optional) Scope of the address among ['public']

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ip shared address <A.B.C.D/LEN> provider application <WORD> epg <WORD> [scope <scope>]

ip split-horizon

ip split-horizon eigrp default

Description: Set the split-horizon flag

Syntax:

eigrp

EIGRP

default

EIGRP default instance

Command Mode: template eigrp interface-policy : Configure EIGRP Interface policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template eigrp interface-policy <WORD> tenant <WORD>
(config-template-eigrp-if-pol)# ip split-horizon eigrp default

ip split-horizon eigrp default

Description: Set EIGRP split-horizon flag

Syntax:

eigrp

EIGRP

default

EIGRP default instance

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip split-horizon eigrp default

ip split-horizon eigrp default

Description: Set EIGRP split-horizon flag

Syntax:

eigrp

EIGRP

default

EIGRP default instance

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip split-horizon eigrp default

ip summary-address eigrp

ip summary-address eigrp default <IP-PREFIX/LEN>

Description: Configure route summarization for EIGRP

Syntax:

default

EIGRP default instance

IP-PREFIX/LEN

Summary IPV4/IPV6 address (e.g. 10.0.0.0/8 or 2001:0DB8:0:1::/64)

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip summary-address eigrp default <IP-PREFIX/LEN>

ip summary-address eigrp default <IP-PREFIX/LEN>

Description: Configure route summarization for EIGRP

Syntax:

default

EIGRP default instance

IP-PREFIX/LEN

Summary IPV4/IPV6 address (e.g. 10.0.0.0/8 or 2001:0DB8:0:1::/64)

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip summary-address eigrp default <IP-PREFIX/LEN>

ip throughput-delay

ip throughput-delay eigrp default <NUMBER> tens-of-micro|pico

Description: Set EIGRP throughut delay

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<0-16777215>

Throughtput delay. Number range from=0 to=16777215

tens-of-micro

Unit in 10-microseconds

pico

Unit in picoseconds

Command Mode: template eigrp interface-policy : Configure EIGRP Interface policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template eigrp interface-policy <WORD> tenant <WORD>
(config-template-eigrp-if-pol)# ip throughput-delay eigrp default <NUMBER> tens-of-micro|pico

ip throughput-delay eigrp default <NUMBER> tens-of-micro|pico

Description: Set EIGRP throughut delay

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<0-16777215>

Throughtput delay. Number range from=0 to=16777215

tens-of-micro

Unit in 10-microseconds

pico

Unit in picoseconds

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ip throughput-delay eigrp default <NUMBER> tens-of-micro|pico

ip throughput-delay eigrp default <NUMBER> tens-of-micro|pico

Description: Set EIGRP throughut delay

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<0-16777215>

Throughtput delay. Number range from=0 to=16777215

tens-of-micro

Unit in 10-microseconds

pico

Unit in picoseconds

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ip throughput-delay eigrp default <NUMBER> tens-of-micro|pico

ip ttl

ip ttl <ttl>

Description: TTL

Syntax:

ttl

ttl value. Number range from=1 to=255

Command Mode: destination tenant : Configure monitor remote destination

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>
(config-monitor-access-dest)# ip ttl <ttl>

ip ttl <ttl>

Description: TTL

Syntax:

ttl

ttl value. Number range from=1 to=255

Command Mode: destination : Configure monitor remote destination

Command Path:

# configure [['terminal', 't']]
(config)# monitor fabric session <session_name>
(config-monitor-fabric)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>
(config-monitor-fabric-dest)# ip ttl <ttl>

ip ttl <arg>

Description: TTL

Syntax:

arg

ttl value. Number range from=1 to=255

Command Mode: destination : Configure monitor remote destination

Command Path:

# configure [['terminal', 't']]
(config)# monitor tenant <tenant_name> session <session_name>
(config-monitor-tenant)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>
(config-monitor-tenant-dest)# ip ttl <>

ip ttl <arg>

Description: Configure TTL

Syntax:

arg

TTL value. Number range from=1 to=255

Command Mode: destination destip : Configure monitor remote destination

Command Path:

# configure [['terminal', 't']]
(config)# monitor virtual session <WORD>
(config-monitor-virtual)# destination destip <A.B.C.D>
(config-monitor-virtual-remote-dest)# ip ttl <>

iprange

iprange <startip> <endip>

Description: Add ip pool

Syntax:

startip

startip

endip

endip

Command Mode: microsoft : Configure static ip pool

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# microsoft static-ip-pool <name> gateway <gwAddress>
(config-tenant-app-epg-ms-ip-pool)# iprange <startip> <endip>

ipv6

ipv6 route <A:B::C:D/LEN> <ipAddress|null> <ZeroorPref> <BfdorPref>

Description: Configure IPv6 features

Syntax:

route

Configure IPv6 unicast static route

A:B::C:D/LEN

IPv6 prefix format: xxxx:xxxx/ml, xxxx:xxxx::/ml, xxxx::xx/128

ipAddress|null

<ZeroorPref>

<BfdorPref>

Command Mode: vrf : Configure VRF parameters

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# ipv6 route <A:B::C:D/LEN> <ipAddress|null> <ZeroorPref> <BfdorPref>

ipv6 address-range

ipv6 address-range <A:B:C::X/LEN> gateway <A:B:C:X>

Description: Configure IPv6 Address Range

Syntax:

A:B:C::X/LEN

IPv6 address and network mask length

gateway

Configure gateway address on interface

A:B:C:X

Gateway IPv6 address

Command Mode: interface mgmt0 : Out of band management interface

Command Path:

# configure [['terminal', 't']]
(config)# controller
(config-controller)# interface mgmt0
(config-controller-if)# ipv6 address-range <A:B:C::X/LEN> gateway <A:B:C:X>

ipv6 address-range <A:B:C::X/LEN> gateway <A:B:C:X>

Description: Configure IPv6 Address Range

Syntax:

A:B:C::X/LEN

IPv6 address and network mask length

gateway

Configure gateway address on interface

A:B:C:X

Gateway IPv6 address

Command Mode: interface inband-mgmt0 : Inband management interface

Command Path:

# configure [['terminal', 't']]
(config)# controller
(config-controller)# interface inband-mgmt0
(config-controller-if)# ipv6 address-range <A:B:C::X/LEN> gateway <A:B:C:X>

ipv6 address-range <A:B:C::X/LEN> gateway <A:B:C:X>

Description: Configure IPv6 Address Range

Syntax:

A:B:C::X/LEN

IPv6 address and network mask length

gateway

Configure gateway address on interface

A:B:C:X

Gateway IPv6 address

Command Mode: interface mgmt0 : Out of band management interface

Command Path:

# configure [['terminal', 't']]
(config)# switch
(config-switch)# interface mgmt0
(config-switch-if)# ipv6 address-range <A:B:C::X/LEN> gateway <A:B:C:X>

ipv6 address-range <A:B:C::X/LEN> gateway <A:B:C:X>

Description: Configure IPv6 Address Range

Syntax:

A:B:C::X/LEN

IPv6 address and network mask length

gateway

Configure gateway address on interface

A:B:C:X

Gateway IPv6 address

Command Mode: interface inband-mgmt0 : Inband management interface

Command Path:

# configure [['terminal', 't']]
(config)# switch
(config-switch)# interface inband-mgmt0
(config-switch-if)# ipv6 address-range <A:B:C::X/LEN> gateway <A:B:C:X>

ipv6 address

ipv6 address <A:B::C:D/LEN> [scope <scope>] [preferred] [suppress-nd] [eui64]

Description: Define an IPv6 subnet to be exported by the BD

Syntax:

A:B::C:D/LEN

IPv6 prefix format: xxxx:xxxx/ml, xxxx:xxxx::/ml, xxxx::xx/128

scope

(Optional) Scope of the address among ['public', 'private']

preferred

(Optional) Set the address as preferred address

suppress-nd

(Optional) Suppress the Neighbor Discovery on this subnet

eui64

(Optional) Use eui64 interface identifier

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 address <A:B::C:D/LEN> [scope <scope>] [preferred] [suppress-nd] [eui64]

ipv6 address <A:B::C:D/LEN> eui64 preferred

Description: Configure IPv6 address on interface

Syntax:

A:B::C:D/LEN

IPv6 prefix format: xxxx:xxxx/ml, xxxx:xxxx::/ml, xxxx::xx/128

eui64

Configure Extended Unique Identifier for the low-order 64 bits

preferred

Configure IPv6 address as preferred

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 address <A:B::C:D/LEN> eui64 preferred

ipv6 address <A:B::C:D/LEN> eui64 preferred

Description: Configure IPv6 address on interface

Syntax:

A:B::C:D/LEN

IPv6 prefix format: xxxx:xxxx/ml, xxxx:xxxx::/ml, xxxx::xx/128

eui64

Configure Extended Unique Identifier for the low-order 64 bits

preferred

Configure IPv6 address as preferred

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 address <A:B::C:D/LEN> eui64 preferred

ipv6 address <A:B:C::X/LEN> gateway <A:B:C::X>

Description: Configure IP and gateway features

Syntax:

A:B:C::X/LEN

IPv6 address and network mask length

gateway

Configure gateway address on interface

A:B:C::X

Gateway IPv6 address

Command Mode: interface mgmt0 : Out of band management interface

Command Path:

# configure [['terminal', 't']]
(config)# controller
(config-controller)# interface mgmt0
(config-controller-if)# ipv6 address <A:B:C::X/LEN> gateway <A:B:C::X>

ipv6 address <A:B:C::X/LEN> gateway <A:B:C::X>

Description: Configure IPv6 Address and Gateway

Syntax:

A:B:C::X/LEN

IPv6 address and network mask length

gateway

Configure gateway address on interface

A:B:C::X

Gateway IPv6 address

Command Mode: interface inband-mgmt0 : Inband management interface

Command Path:

# configure [['terminal', 't']]
(config)# controller
(config-controller)# interface inband-mgmt0
(config-controller-if)# ipv6 address <A:B:C::X/LEN> gateway <A:B:C::X>

ipv6 address <A:B:C::X/LEN> gateway <A:B:C::X>

Description: Configure IP and gateway features

Syntax:

A:B:C::X/LEN

IPv6 address and network mask length

gateway

Configure gateway address on interface

A:B:C::X

Gateway IPv6 address

Command Mode: interface mgmt0 : Out of band management interface

Command Path:

# configure [['terminal', 't']]
(config)# switch
(config-switch)# interface mgmt0
(config-switch-if)# ipv6 address <A:B:C::X/LEN> gateway <A:B:C::X>

ipv6 address <A:B:C::X/LEN> gateway <A:B:C::X>

Description: Configure IPv6 Address and Gateway

Syntax:

A:B:C::X/LEN

IPv6 address and network mask length

gateway

Configure gateway address on interface

A:B:C::X

Gateway IPv6 address

Command Mode: interface inband-mgmt0 : Inband management interface

Command Path:

# configure [['terminal', 't']]
(config)# switch
(config-switch)# interface inband-mgmt0
(config-switch-if)# ipv6 address <A:B:C::X/LEN> gateway <A:B:C::X>

ipv6 address tenant application

ipv6 address <A:B::C:D> tenant <WORD> application <WORD> epg <WORD>

Description: Add a new server relay address under an AEPg

Syntax:

A:B::C:D

IPv6 address in format xxxx:xxxx, xxxx::xx

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

WORD

Application hosting the EPG (Max Size 64)

epg

AEPg behind which the DHCP server sits

WORD

AEPg behind which the DHCP server sits (Max Size 64)

Command Mode: template dhcp relay : Create a DHCP Relay policy

Command Path:

# configure [['terminal', 't']]
(config)# template dhcp relay policy <WORD>
(config-template-dhcp-relay)# ipv6 address <A:B::C:D> tenant <WORD> application <WORD> epg <WORD>

ipv6 address <A:B::C:D> tenant <WORD> application <WORD> epg <WORD>

Description: Add a new server relay address under an AEPg

Syntax:

A:B::C:D

IPv6 address in format xxxx:xxxx, xxxx::xx

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

WORD

Application hosting the EPG (Max Size 64)

epg

AEPg behind which the DHCP server sits

WORD

AEPg behind which the DHCP server sits (Max Size 64)

Command Mode: template dhcp relay : Create a DHCP Relay policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template dhcp relay policy <WORD>
(config-tenant-template-dhcp-relay)# ipv6 address <A:B::C:D> tenant <WORD> application <WORD> epg <WORD>

ipv6 address tenant external-l2

ipv6 address <A:B::C:D> tenant <WORD> external-l2 epg <WORD>

Description: Add a new server relay address under a L2 External EPG

Syntax:

A:B::C:D

IPv6 address in format xxxx:xxxx, xxxx::xx

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

epg

epg keyword

WORD

l2 external EPG behind which the DHCP server sits (Max Size 64)

Command Mode: template dhcp relay : Create a DHCP Relay policy

Command Path:

# configure [['terminal', 't']]
(config)# template dhcp relay policy <WORD>
(config-template-dhcp-relay)# ipv6 address <A:B::C:D> tenant <WORD> external-l2 epg <WORD>

ipv6 address <A:B::C:D> tenant <WORD> external-l2 epg <WORD>

Description: Add a new server relay address under a L2 External EPG

Syntax:

A:B::C:D

IPv6 address in format xxxx:xxxx, xxxx::xx

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

epg

epg keyword

WORD

l2 external EPG behind which the DHCP server sits (Max Size 64)

Command Mode: template dhcp relay : Create a DHCP Relay policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template dhcp relay policy <WORD>
(config-tenant-template-dhcp-relay)# ipv6 address <A:B::C:D> tenant <WORD> external-l2 epg <WORD>

ipv6 address tenant external-l3

ipv6 address <A:B::C:D> tenant <WORD> external-l3 epg <WORD>

Description: Add a new server relay address under a L3 External EPG

Syntax:

A:B::C:D

IPv6 address in format xxxx:xxxx, xxxx::xx

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

epg

EPG keyword

WORD

l3 external EPG behind which the DHCP server sits (Max Size 64)

Command Mode: template dhcp relay : Create a DHCP Relay policy

Command Path:

# configure [['terminal', 't']]
(config)# template dhcp relay policy <WORD>
(config-template-dhcp-relay)# ipv6 address <A:B::C:D> tenant <WORD> external-l3 epg <WORD>

ipv6 address <A:B::C:D> tenant <WORD> external-l3 epg <WORD>

Description: Add a new server relay address under a L3 External EPG

Syntax:

A:B::C:D

IPv6 address in format xxxx:xxxx, xxxx::xx

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

epg

EPG keyword

WORD

l3 external EPG behind which the DHCP server sits (Max Size 64)

Command Mode: template dhcp relay : Create a DHCP Relay policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template dhcp relay policy <WORD>
(config-tenant-template-dhcp-relay)# ipv6 address <A:B::C:D> tenant <WORD> external-l3 epg <WORD>

ipv6 bandwidth

ipv6 bandwidth eigrp default <NUMBER>

Description: Set EIGRP bandwidth

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<0-2560000000>

bandwidth in kbps. Number range from=0 to=2560000000

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 bandwidth eigrp default <NUMBER>

ipv6 bandwidth eigrp default <NUMBER>

Description: Set EIGRP bandwidth

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<0-2560000000>

bandwidth in kbps. Number range from=0 to=2560000000

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 bandwidth eigrp default <NUMBER>

ipv6 bfd

ipv6 bfd eigrp enable

Description: Enable EIGRP Bidirectional Forwarding Detection

Syntax:

eigrp

EIGRP

enable

Enable BFD

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 bfd eigrp enable

ipv6 bfd eigrp enable

Description: Enable EIGRP Bidirectional Forwarding Detection

Syntax:

eigrp

EIGRP

enable

Enable BFD

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 bfd eigrp enable

ipv6 dhcp relay address tenant application

ipv6 dhcp relay address <A:B::C:D> tenant <WORD> application <WORD> epg <WORD>

Description: Add a new server relay address under an AEPg

Syntax:

A:B::C:D

IPv6 address in format xxxx:xxxx, xxxx::xx

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

WORD

Application hosting the EPG (Max Size 64)

epg

AEPg behind which the DHCP server sits

WORD

AEPg behind which the DHCP server sits (Max Size 64)

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 dhcp relay address <A:B::C:D> tenant <WORD> application <WORD> epg <WORD>

ipv6 dhcp relay address tenant external-l2

ipv6 dhcp relay address <A:B::C:D> tenant <WORD> external-l2 epg <WORD>

Description: Add a new server relay address under a L2 External EPG

Syntax:

A:B::C:D

IPv6 address in format xxxx:xxxx, xxxx::xx

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

epg

epg keyword

WORD

l2 external EPG behind which the DHCP server sits (Max Size 64)

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 dhcp relay address <A:B::C:D> tenant <WORD> external-l2 epg <WORD>

ipv6 dhcp relay address tenant external-l3

ipv6 dhcp relay address <A:B::C:D> tenant <WORD> external-l3 epg <WORD>

Description: Add a new server relay address under a L3 External EPG

Syntax:

A:B::C:D

IPv6 address in format xxxx:xxxx, xxxx::xx

tenant

Tenant hosting the DHCP server

WORD

Tenant hosting the EPG (Max Size 63)

epg

EPG keyword

WORD

l3 external EPG behind which the DHCP server sits (Max Size 64)

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 dhcp relay address <A:B::C:D> tenant <WORD> external-l3 epg <WORD>

ipv6 distribute-list eigrp

ipv6 distribute-list eigrp default route-map <WORD> out

Description: Configure distribute-list EIGRP route-map

Syntax:

default

EIGRP default instance

route-map

route map

WORD

Route-map name (Max Size 64)

out

out

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 distribute-list eigrp default route-map <WORD> out

ipv6 distribute-list eigrp default route-map <WORD> out

Description: Configure distribute-list EIGRP Policies

Syntax:

default

EIGRP default instance

route-map

route map

WORD

Route-map name (Max Size 64)

out

out

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 distribute-list eigrp default route-map <WORD> out

ipv6 hello-interval

ipv6 hello-interval eigrp default <NUMBER>

Description: Set EIGRP Hello interval time

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<1-65535>

Hello interval time in seconds. Number range from=1 to=65535

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 hello-interval eigrp default <NUMBER>

ipv6 hello-interval eigrp default <NUMBER>

Description: Set EIGRP Hello interval time

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<1-65535>

Hello interval time in seconds. Number range from=1 to=65535

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 hello-interval eigrp default <NUMBER>

ipv6 hold-interval

ipv6 hold-interval eigrp default <NUMBER>

Description: Set EIGRP Hold interval time

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<1-65535>

Hold interval time in seconds. Number range from=1 to=65535

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 hold-interval eigrp default <NUMBER>

ipv6 hold-interval eigrp default <NUMBER>

Description: Set EIGRP Hold interval time

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<1-65535>

Hold interval time in seconds. Number range from=1 to=65535

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 hold-interval eigrp default <NUMBER>

ipv6 link-local

ipv6 link-local <A:B::C:D>

Description: Configure IPv6 link-local address

Syntax:

A:B::C:D

IPv6 address in format xxxx:xxxx, xxxx::xx

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 link-local <A:B::C:D>

ipv6 link-local <X:X:X:X::X>

Description: Configure IPv6 link-local address

Syntax:

X:X:X:X::X

IPv6 link-local address

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 link-local <X:X:X:X::X>

ipv6 link-local <X:X:X:X::X>

Description: Configure IPv6 link-local address

Syntax:

X:X:X:X::X

IPv6 link-local address

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 link-local <X:X:X:X::X>

ipv6 nd hop-limit

ipv6 nd hop-limit <NUMBER>

Description: Set the hop limit to be advertised in IPv6 neighbor discovery packets

Syntax:

<0-255>

Hop Limit. Number range from=0 to=255

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 nd hop-limit <NUMBER>

ipv6 nd hop-limit <NUMBER>

Description: Set the hop limit to be advertised in IPv6 neighbor discovery packets

Syntax:

<0-255>

Hop Limit. Number range from=0 to=255

Command Mode: template ipv6 nd policy : Create/modify an an IPv6 Neighbor Discovery policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ipv6 nd policy <WORD>
(config-tenant-template-ipv6-nd)# ipv6 nd hop-limit <NUMBER>

ipv6 nd hop-limit <NUMBER>

Description: Set the hop limit to be advertised in IPv6 neighbor discovery packets

Syntax:

<0-255>

Hop Limit. Number range from=0 to=255

Command Mode: template ipv6 nd policy : Configure IPv6 Neighbor Discovery policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ipv6 nd policy <WORD> tenant <WORD>
(config-template-nd-pol)# ipv6 nd hop-limit <NUMBER>

ipv6 nd hop-limit <NUMBER>

Description: Set the hop limit to be advertised in IPv6 neighbor discovery packets

Syntax:

<0-255>

Hop Limit. Number range from=0 to=255

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 nd hop-limit <NUMBER>

ipv6 nd hop-limit <NUMBER>

Description: Set the hop limit to be advertised in IPv6 neighbor discovery packets

Syntax:

<0-255>

Hop Limit. Number range from=0 to=255

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 nd hop-limit <NUMBER>

ipv6 nd managed-config-flag

ipv6 nd managed-config-flag

Description: Use stateful address auto-configuration to obtain address information

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 nd managed-config-flag

ipv6 nd managed-config-flag

Description: Use stateful address auto-configuration to obtain address information

Command Mode: template ipv6 nd policy : Create/modify an an IPv6 Neighbor Discovery policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ipv6 nd policy <WORD>
(config-tenant-template-ipv6-nd)# ipv6 nd managed-config-flag

ipv6 nd managed-config-flag

Description: Use stateful address auto-configuration to obtain address information

Command Mode: template ipv6 nd policy : Configure IPv6 Neighbor Discovery policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ipv6 nd policy <WORD> tenant <WORD>
(config-template-nd-pol)# ipv6 nd managed-config-flag

ipv6 nd managed-config-flag

Description: Use stateful address auto-configuration to obtain address information

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 nd managed-config-flag

ipv6 nd managed-config-flag

Description: Use stateful address auto-configuration to obtain address information

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 nd managed-config-flag

ipv6 nd mtu

ipv6 nd mtu <NUMBER>

Description: Set the mtu to be advertised in IPv6 neighbor discovery packets

Syntax:

<1280-9000>

MTU value. Number range from=1280 to=9000

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 nd mtu <NUMBER>

ipv6 nd mtu <NUMBER>

Description: Set the mtu to be advertised in IPv6 neighbor discovery packets

Syntax:

<1280-9000>

MTU value. Number range from=1280 to=9000

Command Mode: template ipv6 nd policy : Create/modify an an IPv6 Neighbor Discovery policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ipv6 nd policy <WORD>
(config-tenant-template-ipv6-nd)# ipv6 nd mtu <NUMBER>

ipv6 nd mtu <NUMBER>

Description: Set the mtu to be advertised in IPv6 neighbor discovery packets

Syntax:

<1280-9000>

MTU value. Number range from=1280 to=9000

Command Mode: template ipv6 nd policy : Configure IPv6 Neighbor Discovery policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ipv6 nd policy <WORD> tenant <WORD>
(config-template-nd-pol)# ipv6 nd mtu <NUMBER>

ipv6 nd mtu <NUMBER>

Description: Set the mtu to be advertised in IPv6 neighbor discovery packets

Syntax:

<1280-9000>

MTU value. Number range from=1280 to=9000

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 nd mtu <NUMBER>

ipv6 nd mtu <NUMBER>

Description: Set the mtu to be advertised in IPv6 neighbor discovery packets

Syntax:

<1280-9000>

MTU value. Number range from=1280 to=9000

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 nd mtu <NUMBER>

ipv6 nd ns-interval

ipv6 nd ns-interval <NUMBER>

Description: Set the retransmission interval between IPv6 neighbor solicitation messages

Syntax:

<1000-3600000>

Interval value. Number range from=1000 to=3600000

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 nd ns-interval <NUMBER>

ipv6 nd ns-interval <NUMBER>

Description: Set the retransmission interval between IPv6 neighbor solicitation messages

Syntax:

<1000-3600000>

Interval value. Number range from=1000 to=3600000

Command Mode: template ipv6 nd policy : Create/modify an an IPv6 Neighbor Discovery policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ipv6 nd policy <WORD>
(config-tenant-template-ipv6-nd)# ipv6 nd ns-interval <NUMBER>

ipv6 nd ns-interval <NUMBER>

Description: Set the retransmission interval between IPv6 neighbor solicitation messages

Syntax:

<1000-3600000>

Interval value. Number range from=1000 to=3600000

Command Mode: template ipv6 nd policy : Configure IPv6 Neighbor Discovery policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ipv6 nd policy <WORD> tenant <WORD>
(config-template-nd-pol)# ipv6 nd ns-interval <NUMBER>

ipv6 nd ns-interval <NUMBER>

Description: Set the retransmission interval between IPv6 neighbor solicitation messages

Syntax:

<1000-3600000>

Interval value. Number range from=1000 to=3600000

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 nd ns-interval <NUMBER>

ipv6 nd ns-interval <NUMBER>

Description: Set the retransmission interval between IPv6 neighbor solicitation messages

Syntax:

<1000-3600000>

Interval value. Number range from=1000 to=3600000

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 nd ns-interval <NUMBER>

ipv6 nd ns-retries

ipv6 nd ns-retries <NUMBER>

Description: Set the retry count for for sending neighbor solicitation messages

Syntax:

<1-100>

Number of retries. Number range from=1 to=100

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 nd ns-retries <NUMBER>

ipv6 nd ns-retries <NUMBER>

Description: Set the retry count for for sending neighbor solicitation messages

Syntax:

<1-100>

Number of retries. Number range from=1 to=100

Command Mode: template ipv6 nd policy : Create/modify an an IPv6 Neighbor Discovery policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ipv6 nd policy <WORD>
(config-tenant-template-ipv6-nd)# ipv6 nd ns-retries <NUMBER>

ipv6 nd ns-retries <NUMBER>

Description: Set the retry count for for sending neighbor solicitation messages

Syntax:

<1-100>

Number of retries. Number range from=1 to=100

Command Mode: template ipv6 nd policy : Configure IPv6 Neighbor Discovery policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ipv6 nd policy <WORD> tenant <WORD>
(config-template-nd-pol)# ipv6 nd ns-retries <NUMBER>

ipv6 nd ns-retries <NUMBER>

Description: Set the retry count for for sending neighbor solicitation messages

Syntax:

<1-100>

Number of retries. Number range from=1 to=100

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 nd ns-retries <NUMBER>

ipv6 nd ns-retries <NUMBER>

Description: Set the retry count for for sending neighbor solicitation messages

Syntax:

<1-100>

Number of retries. Number range from=1 to=100

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 nd ns-retries <NUMBER>

ipv6 nd other-config-flag

ipv6 nd other-config-flag

Description: Use stateful auto-configuration to obtain NON-address information

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 nd other-config-flag

ipv6 nd other-config-flag

Description: Use stateful auto-configuration to obtain NON-address information

Command Mode: template ipv6 nd policy : Create/modify an an IPv6 Neighbor Discovery policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ipv6 nd policy <WORD>
(config-tenant-template-ipv6-nd)# ipv6 nd other-config-flag

ipv6 nd other-config-flag

Description: Use stateful auto-configuration to obtain NON-address information

Command Mode: template ipv6 nd policy : Configure IPv6 Neighbor Discovery policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ipv6 nd policy <WORD> tenant <WORD>
(config-template-nd-pol)# ipv6 nd other-config-flag

ipv6 nd other-config-flag

Description: Use stateful auto-configuration to obtain NON-address information

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 nd other-config-flag

ipv6 nd other-config-flag

Description: Use stateful auto-configuration to obtain NON-address information

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 nd other-config-flag

ipv6 nd policy

ipv6 nd policy <WORD>

Description: Associate the BD with an IPv6 Neighbor Discovery policy

Syntax:

WORD

Name of the policy to associate (Max Size 64)

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 nd policy <WORD>

ipv6 nd prefix

ipv6 nd prefix <A:B::C:D/LEN> <NUMBER> <NUMBER> [no-autoconfig] [no-onlink] [router-address]

Description: Advertise in Neighbor Discover a Prefix and configure the parameters

Syntax:

A:B::C:D/LEN

IPv6 prefix format: xxxx:xxxx/ml, xxxx:xxxx::/ml, xxxx::xx/128

<0-4294967295>

Lifetime to advertise for the prefix, in seconds. Number range from=0 to=4294967295

<0-4294967295>

Preferred lifetime to advertise, in seconds. Number range from=0 to=4294967295

no-autoconfig

(Optional) advertise with A bit clear

no-onlink

(Optional) advertise with L bit clear

router-address

(Optional) Set this prefix as usable as default gateway by the hosts

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 nd prefix <A:B::C:D/LEN> <NUMBER> <NUMBER> [no-autoconfig] [no-onlink] [router-address]

ipv6 nd prefix <NUMBER> <NUMBER> [no-autoconfig] [no-onlink] [router-address]

Description: Advertise in Neighbor Discover a Prefix and configure the parameters

Syntax:

<0-4294967295>

Lifetime to advertise for the prefix, in seconds. Number range from=0 to=4294967295

<0-4294967295>

Preferred lifetime to advertise, in seconds. Number range from=0 to=4294967295

no-autoconfig

(Optional) advertise with A bit clear

no-onlink

(Optional) advertise with L bit clear

router-address

(Optional) Set this prefix as usable as default gateway by the hosts

Command Mode: template ipv6 nd prefix : Create/modify an an IPv6 Neighbor Prefix policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ipv6 nd prefix policy <WORD>
(config-tenant-template-ipv6-nd-pfx)# ipv6 nd prefix <NUMBER> <NUMBER> [no-autoconfig] [no-onlink] [router-address]

ipv6 nd ra-interval

ipv6 nd ra-interval <NUMBER>

Description: Set the interval between sending ICMPv6 router advertisement messages

Syntax:

<200-1800>

Interval in seconds. Number range from=200 to=1800

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 nd ra-interval <NUMBER>

ipv6 nd ra-interval <NUMBER>

Description: Set the interval between sending ICMPv6 router advertisement messages

Syntax:

<200-1800>

Interval in seconds. Number range from=200 to=1800

Command Mode: template ipv6 nd policy : Create/modify an an IPv6 Neighbor Discovery policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ipv6 nd policy <WORD>
(config-tenant-template-ipv6-nd)# ipv6 nd ra-interval <NUMBER>

ipv6 nd ra-interval <NUMBER>

Description: Set the interval between sending ICMPv6 router advertisement messages

Syntax:

<200-1800>

Interval in seconds. Number range from=200 to=1800

Command Mode: template ipv6 nd policy : Configure IPv6 Neighbor Discovery policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ipv6 nd policy <WORD> tenant <WORD>
(config-template-nd-pol)# ipv6 nd ra-interval <NUMBER>

ipv6 nd ra-interval <NUMBER>

Description: Set the interval between sending ICMPv6 router advertisement messages

Syntax:

<200-1800>

Interval in seconds. Number range from=200 to=1800

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 nd ra-interval <NUMBER>

ipv6 nd ra-interval <NUMBER>

Description: Set the interval between sending ICMPv6 router advertisement messages

Syntax:

<200-1800>

Interval in seconds. Number range from=200 to=1800

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 nd ra-interval <NUMBER>

ipv6 nd ra-lifetime

ipv6 nd ra-lifetime <NUMBER>

Description: Set the router lifetime of a default router in ICMPv6 router advertisement messages

Syntax:

<0-9000>

Lifetime in seconds. Number range from=0 to=9000

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 nd ra-lifetime <NUMBER>

ipv6 nd ra-lifetime <NUMBER>

Description: Set the router lifetime of a default router in ICMPv6 router advertisement messages

Syntax:

<0-9000>

Lifetime in seconds. Number range from=0 to=9000

Command Mode: template ipv6 nd policy : Create/modify an an IPv6 Neighbor Discovery policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ipv6 nd policy <WORD>
(config-tenant-template-ipv6-nd)# ipv6 nd ra-lifetime <NUMBER>

ipv6 nd ra-lifetime <NUMBER>

Description: Set the router lifetime of a default router in ICMPv6 router advertisement messages

Syntax:

<0-9000>

Lifetime in seconds. Number range from=0 to=9000

Command Mode: template ipv6 nd policy : Configure IPv6 Neighbor Discovery policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ipv6 nd policy <WORD> tenant <WORD>
(config-template-nd-pol)# ipv6 nd ra-lifetime <NUMBER>

ipv6 nd ra-lifetime <NUMBER>

Description: Set the router lifetime of a default router in ICMPv6 router advertisement messages

Syntax:

<0-9000>

Lifetime in seconds. Number range from=0 to=9000

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 nd ra-lifetime <NUMBER>

ipv6 nd ra-lifetime <NUMBER>

Description: Set the router lifetime of a default router in ICMPv6 router advertisement messages

Syntax:

<0-9000>

Lifetime in seconds. Number range from=0 to=9000

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 nd ra-lifetime <NUMBER>

ipv6 nd reachable-time

ipv6 nd reachable-time <NUMBER>

Description: Set the time for reachability confirmation in ICMPv6 router advertisement messages

Syntax:

<0-3600000>

Reachable timer in seconds. Number range from=0 to=3600000

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 nd reachable-time <NUMBER>

ipv6 nd reachable-time <NUMBER>

Description: Set the time for reachability confirmation in ICMPv6 router advertisement messages

Syntax:

<0-3600000>

Reachable timer in seconds. Number range from=0 to=3600000

Command Mode: template ipv6 nd policy : Create/modify an an IPv6 Neighbor Discovery policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ipv6 nd policy <WORD>
(config-tenant-template-ipv6-nd)# ipv6 nd reachable-time <NUMBER>

ipv6 nd reachable-time <NUMBER>

Description: Set the time for reachability confirmation in ICMPv6 router advertisement messages

Syntax:

<0-3600000>

Time in seconds. Number range from=0 to=3600000

Command Mode: template ipv6 nd policy : Configure IPv6 Neighbor Discovery policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ipv6 nd policy <WORD> tenant <WORD>
(config-template-nd-pol)# ipv6 nd reachable-time <NUMBER>

ipv6 nd reachable-time <NUMBER>

Description: Set the time for reachability confirmation in ICMPv6 router advertisement messages

Syntax:

<0-3600000>

Time in seconds. Number range from=0 to=3600000

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 nd reachable-time <NUMBER>

ipv6 nd reachable-time <NUMBER>

Description: Set the time for reachability confirmation in ICMPv6 router advertisement messages

Syntax:

<0-3600000>

Time in seconds. Number range from=0 to=3600000

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 nd reachable-time <NUMBER>

ipv6 nd retrans-timer

ipv6 nd retrans-timer <NUMBER>

Description: Set the time between neighbor solicitation (NS) messages in ICMPv6 router advertisement

Syntax:

<0-4294967295>

Retransmit timer, in seconds. Number range from=0 to=4294967295

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 nd retrans-timer <NUMBER>

ipv6 nd retrans-timer <NUMBER>

Description: Set the time between neighbor solicitation (NS) messages in ICMPv6 router advertisement

Syntax:

<0-4294967295>

Retransmit timer, in seconds. Number range from=0 to=4294967295

Command Mode: template ipv6 nd policy : Create/modify an an IPv6 Neighbor Discovery policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ipv6 nd policy <WORD>
(config-tenant-template-ipv6-nd)# ipv6 nd retrans-timer <NUMBER>

ipv6 nd retrans-timer <NUMBER>

Description: Set the time between neighbor solicitation (NS) messages in ICMPv6 router advertisement

Syntax:

<0-4294967295>

Timer in seconds. Number range from=0 to=4294967295

Command Mode: template ipv6 nd policy : Configure IPv6 Neighbor Discovery policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ipv6 nd policy <WORD> tenant <WORD>
(config-template-nd-pol)# ipv6 nd retrans-timer <NUMBER>

ipv6 nd retrans-timer <NUMBER>

Description: Set the time between neighbor solicitation (NS) messages in ICMPv6 router advertisement

Syntax:

<0-4294967295>

Timer in seconds. Number range from=0 to=4294967295

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 nd retrans-timer <NUMBER>

ipv6 nd retrans-timer <NUMBER>

Description: Set the time between neighbor solicitation (NS) messages in ICMPv6 router advertisement

Syntax:

<0-4294967295>

Timer in seconds. Number range from=0 to=4294967295

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 nd retrans-timer <NUMBER>

ipv6 nd suppress-ra-mtu

ipv6 nd suppress-ra-mtu

Description: Disable sending MTU option in ICMPv6 router advertisement messages

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 nd suppress-ra-mtu

ipv6 nd suppress-ra-mtu

Description: Disable sending MTU option in ICMPv6 router advertisement messages

Command Mode: template ipv6 nd policy : Create/modify an an IPv6 Neighbor Discovery policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ipv6 nd policy <WORD>
(config-tenant-template-ipv6-nd)# ipv6 nd suppress-ra-mtu

ipv6 nd suppress-ra-mtu

Description: Disable sending MTU option in ICMPv6 router advertisement messages

Command Mode: template ipv6 nd policy : Configure IPv6 Neighbor Discovery policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ipv6 nd policy <WORD> tenant <WORD>
(config-template-nd-pol)# ipv6 nd suppress-ra-mtu

ipv6 nd suppress-ra-mtu

Description: Disable sending MTU option in ICMPv6 router advertisement messages

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 nd suppress-ra-mtu

ipv6 nd suppress-ra-mtu

Description: Disable sending MTU option in ICMPv6 router advertisement messages

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 nd suppress-ra-mtu

ipv6 nd suppress-ra

ipv6 nd suppress-ra

Description: Disable sending ICMPv6 router advertisement messages

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 nd suppress-ra

ipv6 nd suppress-ra

Description: Disable sending ICMPv6 router advertisement messages

Command Mode: template ipv6 nd policy : Create/modify an an IPv6 Neighbor Discovery policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ipv6 nd policy <WORD>
(config-tenant-template-ipv6-nd)# ipv6 nd suppress-ra

ipv6 nd suppress-ra

Description: Disable sending ICMPv6 router advertisement messages

Command Mode: template ipv6 nd policy : Configure IPv6 Neighbor Discovery policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ipv6 nd policy <WORD> tenant <WORD>
(config-template-nd-pol)# ipv6 nd suppress-ra

ipv6 nd suppress-ra

Description: Disable sending ICMPv6 router advertisement messages

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 nd suppress-ra

ipv6 nd suppress-ra

Description: Disable sending ICMPv6 router advertisement messages

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 nd suppress-ra

ipv6 next-hop-self

ipv6 next-hop-self eigrp default

Description: Set EIGRP next-hop-self flag

Syntax:

eigrp

EIGRP

default

EIGRP default instance

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 next-hop-self eigrp default

ipv6 next-hop-self eigrp default

Description: Set EIGRP next-hop-self flag

Syntax:

eigrp

EIGRP

default

EIGRP default instance

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 next-hop-self eigrp default

ipv6 ospf bfd

ipv6 ospf bfd enable

Description: Enable Bidirectional Forwarding Detection

Syntax:

enable

Enable BFD

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 ospf bfd enable

ipv6 ospf bfd enable

Description: Enable Bidirectional Forwarding Detection

Syntax:

enable

Enable BFD

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 ospf bfd enable

ipv6 ospf cost

ipv6 ospf cost <NUMBER>

Description: Set OSPF cost for the interface

Syntax:

<0-65535>

OSPF cost. Number range from=0 to=65535

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 ospf cost <NUMBER>

ipv6 ospf cost <NUMBER>

Description: Set OSPF cost for the interface

Syntax:

<0-65535>

OSPF cost. Number range from=0 to=65535

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 ospf cost <NUMBER>

ipv6 ospf dead-interval

ipv6 ospf dead-interval <NUMBER>

Description: Set the interval between hello packets from a neighbor before the router declares the neighbor as down

Syntax:

<1-65535>

Interval in seconds. Number range from=1 to=65535

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 ospf dead-interval <NUMBER>

ipv6 ospf dead-interval <NUMBER>

Description: Set the interval between hello packets from a neighbor before the router declares the neighbor as down

Syntax:

<1-65535>

Interval in seconds. Number range from=1 to=65535

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 ospf dead-interval <NUMBER>

ipv6 ospf hello-interval

ipv6 ospf hello-interval <NUMBER>

Description: Set interval between hello packets that OSPF sends on the interface

Syntax:

<1-65535>

Interval in seconds. Number range from=1 to=65535

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 ospf hello-interval <NUMBER>

ipv6 ospf hello-interval <NUMBER>

Description: Set interval between hello packets that OSPF sends on the interface

Syntax:

<1-65535>

Interval in seconds. Number range from=1 to=65535

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 ospf hello-interval <NUMBER>

ipv6 ospf inherit

ipv6 ospf inherit interface-policy <WORD> tenant <WORD>

Description: Inherit OSPF Template Policy under this VRF

Syntax:

interface-policy

Inherit OSPF interface-policy

WORD

OSPF Template Policy name (Max Size 64)

tenant

tenant name

WORD

Tenant name (Max Size 63)

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 ospf inherit interface-policy <WORD> tenant <WORD>

ipv6 ospf inherit interface-policy <WORD> tenant <WORD>

Description: Inherit OSPF Template Policy under this VRF

Syntax:

interface-policy

Inherit OSPF interface-policy

WORD

OSPF Template Policy name (Max Size 64)

tenant

tenant name

WORD

Tenant name (Max Size 63)

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 ospf inherit interface-policy <WORD> tenant <WORD>

ipv6 ospf mtu-ignore

ipv6 ospf mtu-ignore

Description: Set OSPF Interface Policy Controls

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 ospf mtu-ignore

ipv6 ospf mtu-ignore

Description: Set OSPF Interface Policy Controls

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 ospf mtu-ignore

ipv6 ospf network

ipv6 ospf network bcast|p2p|unspecified

Description: Set OSPF interface policy network type

Syntax:

bcast

The OSPF interface policy network type. OSPF supports point-to-point and broadcast.

p2p

The OSPF interface policy network type. OSPF supports point-to-point and broadcast.

unspecified

The OSPF interface policy network type. OSPF supports point-to-point and broadcast.

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 ospf network bcast|p2p|unspecified

ipv6 ospf network bcast|p2p|unspecified

Description: Set OSPF interface policy network type

Syntax:

bcast

The OSPF interface policy network type. OSPF supports point-to-point and broadcast.

p2p

The OSPF interface policy network type. OSPF supports point-to-point and broadcast.

unspecified

The OSPF interface policy network type. OSPF supports point-to-point and broadcast.

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 ospf network bcast|p2p|unspecified

ipv6 ospf passive-interface

ipv6 ospf passive-interface

Description: Set OSPF Interface Policy Controls

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 ospf passive-interface

ipv6 ospf passive-interface

Description: Set OSPF Interface Policy Controls

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 ospf passive-interface

ipv6 ospf prefix-suppression

ipv6 ospf prefix-suppression disable|enable|inherit

Description: Set prefix suppression

Syntax:

disable

The OSPF interface prefix suppression.

enable

The OSPF interface prefix suppression.

inherit

The OSPF interface prefix suppression.

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 ospf prefix-suppression disable|enable|inherit

ipv6 ospf prefix-suppression disable|enable|inherit

Description: Set prefix suppression

Syntax:

disable

The OSPF interface prefix suppression.

enable

The OSPF interface prefix suppression.

inherit

The OSPF interface prefix suppression.

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 ospf prefix-suppression disable|enable|inherit

ipv6 ospf priority

ipv6 ospf priority <NUMBER>

Description: Set OSPF interface priority used to determine the designated router (DR) on a specific network

Syntax:

<0-255>

OSPF priority. Number range from=0 to=255

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 ospf priority <NUMBER>

ipv6 ospf priority <NUMBER>

Description: Set OSPF interface priority used to determine the designated router (DR) on a specific network

Syntax:

<0-255>

OSPF priority. Number range from=0 to=255

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 ospf priority <NUMBER>

ipv6 ospf retransmit-interval

ipv6 ospf retransmit-interval <NUMBER>

Description: Set OSPF Policy Graceful Restart Timers

Syntax:

<1-65535>

Interval in seconds. Number range from=1 to=65535

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 ospf retransmit-interval <NUMBER>

ipv6 ospf retransmit-interval <NUMBER>

Description: Set OSPF Policy Graceful Restart Timers

Syntax:

<1-65535>

Interval in seconds. Number range from=1 to=65535

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 ospf retransmit-interval <NUMBER>

ipv6 ospf transmit-delay

ipv6 ospf transmit-delay <NUMBER>

Description: Set the delay time needed to send an LSA update packet.

Syntax:

<1-450>

Delay in seconds. Number range from=1 to=450

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 ospf transmit-delay <NUMBER>

ipv6 ospf transmit-delay <NUMBER>

Description: Set the delay time needed to send an LSA update packet.

Syntax:

<1-450>

Delay in seconds. Number range from=1 to=450

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 ospf transmit-delay <NUMBER>

ipv6 passive-interface

ipv6 passive-interface eigrp default

Description: Set EIGRP passive-interface flag

Syntax:

eigrp

EIGRP

default

EIGRP default instance

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 passive-interface eigrp default

ipv6 passive-interface eigrp default

Description: Set EIGRP passive-interface flag

Syntax:

eigrp

EIGRP

default

EIGRP default instance

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 passive-interface eigrp default

ipv6 router eigrp

ipv6 router eigrp default

Description: Configure EIGRP default interface

Syntax:

default

EIGRP default instance

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 router eigrp default

ipv6 router eigrp default

Description: Configure EIGRP default interface

Syntax:

default

EIGRP default instance

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 router eigrp default

ipv6 router ospf default

ipv6 router ospf default area <A.B.C.D|NUMBER>

Description: Process tag

Syntax:

area

Area associated with interface

A.B.C.D|NUMBER

OSPF area Id

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 router ospf default area <A.B.C.D|NUMBER>

ipv6 router ospf default area <A.B.C.D|NUMBER>

Description: Process tag

Syntax:

area

Area associated with interface

A.B.C.D|NUMBER

OSPF area Id

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 router ospf default area <A.B.C.D|NUMBER>

ipv6 shared address consumer

ipv6 shared address <A:B::C:D/LEN> consumer application any epg any

Description: Shared consumed service

Syntax:

address

IPv6 subnet

A:B::C:D/LEN

IPv6 prefix format: xxxx:xxxx/ml, xxxx:xxxx::/ml, xxxx::xx/128

application

application keyword

any

any application

epg

epg keyword

any

any EPG

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 shared address <A:B::C:D/LEN> consumer application any epg any

ipv6 shared address provider

ipv6 shared address <A:B::C:D/LEN> provider application <WORD> epg <WORD> [scope <scope>]

Description: Shared provider service

Syntax:

address

IPv6 subnet

A:B::C:D/LEN

IPv6 prefix format: xxxx:xxxx/ml, xxxx:xxxx::/ml, xxxx::xx/128

application

application keyword

WORD

Application Name (Max Size 64)

epg

epg keyword

WORD

Application EPG (Max Size 64)

scope

(Optional) Scope of the address among ['public']

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# ipv6 shared address <A:B::C:D/LEN> provider application <WORD> epg <WORD> [scope <scope>]

ipv6 split-horizon

ipv6 split-horizon eigrp default

Description: Set EIGRP split-horizon flag

Syntax:

eigrp

EIGRP

default

EIGRP default instance

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 split-horizon eigrp default

ipv6 split-horizon eigrp default

Description: Set EIGRP split-horizon flag

Syntax:

eigrp

EIGRP

default

EIGRP default instance

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 split-horizon eigrp default

ipv6 throughput-delay

ipv6 throughput-delay eigrp default <NUMBER> tens-of-micro|pico

Description: Set EIGRP throughut delay

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<0-16777215>

Throughtput delay. Number range from=0 to=16777215

tens-of-micro

Unit in 10-microseconds

pico

Unit in picoseconds

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# ipv6 throughput-delay eigrp default <NUMBER> tens-of-micro|pico

ipv6 throughput-delay eigrp default <NUMBER> tens-of-micro|pico

Description: Set EIGRP throughut delay

Syntax:

eigrp

EIGRP

default

EIGRP default instance

<0-16777215>

Throughtput delay. Number range from=0 to=16777215

tens-of-micro

Unit in 10-microseconds

pico

Unit in picoseconds

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# ipv6 throughput-delay eigrp default <NUMBER> tens-of-micro|pico

isis

isis fabric

Description: Intermediate System to Intermediate System (IS-IS)

Syntax:

fabric

Fabric IS-IS configuration

Command Mode: pod : Pod configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# isis fabric

isolation

isolation enforce

Description: Enable EPG isolation

Syntax:

enforce

Enable enforcing of policy-control rules (EPG isolation)

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# isolation enforce

Chapter 10. K Commands

- key

key

key <WORD>

Description: LDAP server key for authentication

Syntax:

<WORD>

server key (Max Size 32)

Command Mode: ldap-server host : LDAP server DNS name or IP address

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# key <WORD>

key <WORD>

Description: RADIUS server key for authentication

Syntax:

<WORD>

key for authentication (Max Size 32)

Command Mode: radius-server host : RADIUS server's DNS name or its IP address

Command Path:

# configure [['terminal', 't']]
(config)# radius-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# key <WORD>

key <WORD>

Description: TACACS server key for authentication

Syntax:

<WORD>

key for authentication (Max Size 32)

Command Mode: tacacs-server host : TACACS+ server's DNS name or its IP address

Command Path:

# configure [['terminal', 't']]
(config)# tacacs-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# key <WORD>

Chapter 11. L Commands

- l2-unknown-unicast

- l3-unknown-multicast

- l3out

- l4l7-peer

- l4l7

- l4l7 cluster import-from

- l4l7 cluster name

- l4l7 graph

- label match

- label name

- lacp fast-select-hot-standby

- lacp graceful-convergence

- lacp load-defer

- lacp max-links

- lacp min-links

- lacp port-priority

- lacp port-priority interface

- lacp rate

- lacp rate fast normal interface

- lacp suspend-individual

- last-name

- ldap-server attribute

- ldap-server basedn

- ldap-server filter

- ldap-server host

- ldap-server retries

- ldap-server timeout

- leaf-group

- leaf-interface-group

- leaf-interface-profile

- leaf-policy-group

- leaf-profile

- leaf

- legacy

- link

- lldp

- lldp holdtime

- lldp reinit

- lldp timer

- local-as

- locality

- logfile

- logging

- logging audit

- logging description

- logging event

- logging fault

- logging server-group

- logging session

- logging severity

- lsp-fast-flood

- lsp-gen-interval

- lsp-mtu

l2-unknown-unicast

l2-unknown-unicast <WORD>

Description: Change Unknown Unicast flood behavior

Syntax:

WORD

Unicast Unknown threatment

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# l2-unknown-unicast <WORD>

l3-unknown-multicast

l3-unknown-multicast <WORD>

Description: Change L3 Multicast flood behavior

Syntax:

WORD

IP Multicast unknown Fram handling

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# l3-unknown-multicast <WORD>

l3out

l3out <WORD>

Description: Configuration for L3Out

Syntax:

WORD

L3Out name (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l3out <WORD>

l4l7-peer

l4l7-peer tenant <WORD> out <WORD> epg <WORD> redistribute WORD

Description: Configure l3external epg association for a l4l7 graph connector.

Syntax:

tenant

tenant under which the l3external epg resides

WORD

WORD

out

l3external outside name

WORD

WORD

epg

l3external-epg name

WORD

WORD

redistribute

Protocol Redistribute Settings

WORD

Protocol Redistribute Settings

Command Mode: connector : Configure Connector for a Service Node

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 graph <WORD> [contract <contract-option>]
(config-graph)# service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode <Available Modes>]
(config-service)# connector <WORD> [cluster-interface <WORD>]
(config-connector)# l4l7-peer tenant <WORD> out <WORD> epg <WORD> redistribute WORD

l4l7

l4l7 graph <WORD>

Description: Associate a l4l7 graph with this subject

Syntax:

graph

l4l7 graph to associate with

WORD

Service Graph name (Max Size 64)

Command Mode: subject : Configuration a subject on the contract

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# subject <WORD>
(config-tenant-contract-subj)# l4l7 graph <WORD>

l4l7 cluster import-from

l4l7 cluster import-from <WORD> device-cluster <WORD>

Description: Import a L4-L7 Service Device Cluster

Syntax:

WORD

Tenant name (Max Size 63)

device-cluster

Device Cluster name

WORD

Device cluster name (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster import-from <WORD> device-cluster <WORD>

l4l7 cluster name

l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]

Description: Add a L4-L7 Service Device Cluster

Syntax:

WORD

Device cluster name (Max Size 64)

type

Type of l4l7 Device Cluster

type

Type of l4l7 Device Cluster

vlan-domain

Physical or Virtual vlan domain to use for allocating encaps

<domain-name>

Physical Or Virtual vlan domain to use for allocating encaps

service

(Optional) Indicates the type of service the device cluster provides

function

(Optional) Indicates the type of function the device cluster provides

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]

l4l7 graph

l4l7 graph <WORD> [contract <contract-option>]

Description: Configure L4-L7 Service Graph

Syntax:

WORD

Service Graph name (Max Size 64)

contract-option

(Optional) Name of Contract

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 graph <WORD> [contract <contract-option>]

label match

label match provider|consumer any|one|all|none

Description: Specify the match type for the provider or consumer label

Syntax:

provider

Matching type for provider

consumer

Matching type for consumer

any

Match if ANY label is found in the contract relation

one

Match if exactly ONE label is found in the contract relation

all

Match if ALL labels are found in the contract relation

none

Match if NO labels are found in the contract relation

Command Mode: subject : Configuration a subject on the contract

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# subject <WORD>
(config-tenant-contract-subj)# label match provider|consumer any|one|all|none

label name

label name <WORD> provider|consumer

Description: Add a provider or consumer label to the subject

Syntax:

WORD

Name of the label to add (Max Size 64)

provider

Matching type for provider

consumer

Matching type for consumer

Command Mode: subject : Configuration a subject on the contract

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# subject <WORD>
(config-tenant-contract-subj)# label name <WORD> provider|consumer

lacp fast-select-hot-standby

lacp fast-select-hot-standby

Description: Enable LACP fast select for hot standby ports

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# lacp fast-select-hot-standby

lacp fast-select-hot-standby

Description: Enable LACP fast select for hot standby ports

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# lacp fast-select-hot-standby

lacp fast-select-hot-standby

Description: Enable LACP fast select for hot standby ports

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# lacp fast-select-hot-standby

lacp graceful-convergence

lacp graceful-convergence

Description: Enable LACP graceful convergence

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# lacp graceful-convergence

lacp graceful-convergence

Description: Enable LACP graceful convergence

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# lacp graceful-convergence

lacp graceful-convergence

Description: Enable LACP graceful convergence

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# lacp graceful-convergence

lacp load-defer

lacp load-defer

Description: Enable LACP load defer member ports

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# lacp load-defer

lacp load-defer

Description: Enable LACP load defer member ports

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# lacp load-defer

lacp load-defer

Description: Enable LACP load defer member ports

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# lacp load-defer

lacp max-links

lacp max-links <NUMBER>

Description: Configure maximum number of links

Syntax:

<number>

Range 1 to 16. Number range from=1 to=16

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# lacp max-links <NUMBER>

lacp max-links <NUMBER>

Description: Configure maximum number of links

Syntax:

<number>

Range 1 to 16. Number range from=1 to=16

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# lacp max-links <NUMBER>

lacp max-links <NUMBER>

Description: Configure maximum number of links

Syntax:

<number>

Range 1 to 16. Number range from=1 to=16

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# lacp max-links <NUMBER>

lacp min-links

lacp min-links <NUMBER>

Description: Configure minimum number of links

Syntax:

<number>

Range 1 to 16. Number range from=1 to=16

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# lacp min-links <NUMBER>

lacp min-links <NUMBER>

Description: Configure minimum number of links

Syntax:

<number>

Range 1 to 16. Number range from=1 to=16

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# lacp min-links <NUMBER>

lacp min-links <NUMBER>

Description: Configure minimum number of links

Syntax:

<number>

Range 1 to 16. Number range from=1 to=16

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# lacp min-links <NUMBER>

lacp port-priority

lacp port-priority <arg>

Description: Set Lacp priority

Syntax:

arg

Priority Value. Number range from=1 to=65535

Command Mode: leaf-interface-group : Configure Leaf Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>
(config-leaf-if-group)# lacp port-priority <>

lacp port-priority <arg>

Description: Set Lacp priority.

Syntax:

arg

Priority Value. Number range from=1 to=65535

Command Mode: fex-interface-group : Configure Fex Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# fex-profile <WORD>
(config-fex-profile)# fex-interface-group <WORD>
(config-fex-if-group)# lacp port-priority <>

lacp port-priority <NUMBER>

Description: Set Lacp priority.

Syntax:

<1-65535>

Priority Value. Number range from=1 to=65535

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# lacp port-priority <NUMBER>

lacp port-priority interface

lacp port-priority <arg> interface ethernet

Description: Set Port Priority on specific Ports

Syntax:

arg

Priority Value. Number range from=1 to=65535

ethernet

Configure Physical Interface

arg

Provide range of Interfaces

Command Mode: leaf-interface-group : Configure Leaf Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>
(config-leaf-if-group)# lacp port-priority <> interface ethernet

lacp port-priority <arg> interface ethernet

Description: Set Port Priority on specific Ports

Syntax:

arg

Priority Value. Number range from=1 to=65535

ethernet

Configure Physical Interface

arg

Provide range of Interfaces

Command Mode: fex-interface-group : Configure Fex Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# fex-profile <WORD>
(config-fex-profile)# fex-interface-group <WORD>
(config-fex-if-group)# lacp port-priority <> interface ethernet

lacp rate

lacp rate fast|normal

Description: Set Lacp rate

Syntax:

fast

Set rate to fast

normal

Set rate to normal

Command Mode: leaf-interface-group : Configure Leaf Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>
(config-leaf-if-group)# lacp rate fast|normal

lacp rate fast|normal

Description: Set Lacp rate

Syntax:

fast

Set rate to fast

normal

Set rate to normal

Command Mode: fex-interface-group : Configure Fex Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# fex-profile <WORD>
(config-fex-profile)# fex-interface-group <WORD>
(config-fex-if-group)# lacp rate fast|normal

lacp rate fast|normal

Description: Set Lacp rate

Syntax:

fast

Set rate to fast

normal

Set rate to normal

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# lacp rate fast|normal

lacp rate fast normal interface

lacp rate fast|normal interface ethernet

Description: Set Port Priority on specific Ports

Syntax:

fast

Set rate to fast

normal

Set rate to normal

ethernet

Configure Physical Interface

arg

Provide range of Interfaces

Command Mode: leaf-interface-group : Configure Leaf Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>
(config-leaf-if-group)# lacp rate fast|normal interface ethernet

lacp rate fast|normal interface ethernet

Description: Set Port Priority on specific Ports

Syntax:

fast

Set rate to fast

normal

Set rate to normal

ethernet

Configure Physical Interface

arg

Provide range of Interfaces

Command Mode: fex-interface-group : Configure Fex Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# fex-profile <WORD>
(config-fex-profile)# fex-interface-group <WORD>
(config-fex-if-group)# lacp rate fast|normal interface ethernet

lacp suspend-individual

lacp suspend-individual

Description: Enable LACP individual Port suspension

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# lacp suspend-individual

lacp suspend-individual

Description: Enable LACP individual Port suspension

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# lacp suspend-individual

lacp suspend-individual

Description: Enable LACP individual Port suspension

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# lacp suspend-individual

last-name

last-name <WORD>

Description: Set The last name of the locally-authenticated user.

Syntax:

WORD

last name (Max Size 32)

Command Mode: username : Create a locally-authenticated user account

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# last-name <WORD>

ldap-server attribute

ldap-server attribute <WORD>

Description: An LDAP endpoint attribute to be used as the CiscoAVPair

Syntax:

<WORD>

LDAP endpoint attribute (Max Size 63)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server attribute <WORD>

ldap-server basedn

ldap-server basedn <WORD>

Description: The LDAP base DN for user lookup in the LDAP directory tree

Syntax:

<WORD>

user lookup in LDAP directory tree (Max Size 127)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server basedn <WORD>

ldap-server filter

ldap-server filter <WORD>

Description: LDAP search filter for the LDAP endpoint

Syntax:

<WORD>

search filter for the LDAP endpoint (Max Size 63)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server filter <WORD>

ldap-server host

ldap-server host <A.B.C.D|A:B::C:D|WORD>

Description: LDAP server DNS name or IP address

Syntax:

A.B.C.D|A:B::C:D|WORD

Provide a hostname or IPV4/IPV6 address

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>

ldap-server retries

ldap-server retries <NUMBER>

Description: Global LDAP server retransmit count

Syntax:

<0-5>

Global LDAP server retransmit count. Number range from=0 to=5

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server retries <NUMBER>

ldap-server timeout

ldap-server timeout <NUMBER>

Description: Global LDAP server timeout period in seconds

Syntax:

<1-60>

Global LDAP server timeout period in seconds. Number range from=1 to=60

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server timeout <NUMBER>

leaf-group

leaf-group <WORD>

Description: Configure Leaf Group

Syntax:

WORD

Leaf Group name (Max Size 64)

Command Mode: leaf-profile : Configure Leaf Profile

Command Path:

# configure [['terminal', 't']]
(config)# leaf-profile <WORD>
(config-leaf-profile)# leaf-group <WORD>

leaf-interface-group

leaf-interface-group <WORD>

Description: Configure Leaf Interface Group

Syntax:

WORD

Leaf Interface Group name (Max Size 64)

Command Mode: leaf-interface-profile : Create Leaf Interface Profile

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>

leaf-interface-profile

leaf-interface-profile <WORD>

Description: Create Leaf Interface Profile

Syntax:

WORD

Leaf Interface Profile name (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>

leaf-interface-profile <WORD>

Description: Attach Leaf Interface Profile to the Leaf Profile

Syntax:

WORD

Leaf Interface Profile name (Max Size 64)

Command Mode: leaf-profile : Configure Leaf Profile

Command Path:

# configure [['terminal', 't']]
(config)# leaf-profile <WORD>
(config-leaf-profile)# leaf-interface-profile <WORD>

leaf-policy-group

leaf-policy-group <WORD>

Description: Configure leaf policy group

Syntax:

WORD

Leaf policy name (Max Size 64)

Command Mode: leaf-group : Configure Leaf Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-profile <WORD>
(config-leaf-profile)# leaf-group <WORD>
(config-leaf-group)# leaf-policy-group <WORD>

leaf-profile

leaf-profile <WORD>

Description: Configure Leaf Profile

Syntax:

WORD

Leaf Profile name (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# leaf-profile <WORD>

leaf

leaf <101-4000>

Description: Provide a Range of Nodes

Syntax:

<101-4000>

Leaf Range or Leaf Name List

Command Mode: leaf-group : Configure Leaf Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-profile <WORD>
(config-leaf-profile)# leaf-group <WORD>
(config-leaf-group)# leaf <101-4000>

leaf <101-4000>

Description: Configure Leaf Node

Syntax:

<101-4000>

Leaf Range or Leaf Name List

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>

legacy

legacy forwarding vlan <NUMBER> vlan-domain <WORD>

Description: Set the bridge domain to behave as a L2 vlan in traditional ethernet environment

Syntax:

forwarding

Forwarding keyword

vlan

Legacy Vlan Number

<1-4094>

Legacy Vlan Number. Number range from=1 to=4094

vlan-domain

Name of the vlan domain to use

WORD

Name of the vlan domain to use (Max Size 64)

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# legacy forwarding vlan <NUMBER> vlan-domain <WORD>

link

link debounce time <NUMBER>

Description: Configure link

Syntax:

debounce

Configure link debounce timer

time

Link debounce time

<time>

Timer value (in milliseconds). Number range from=0 to=5000

Command Mode: template policy-group : Configure Policy Group Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# link debounce time <NUMBER>

link debounce time <NUMBER>

Description: Configure link

Syntax:

debounce

Configure link debounce timer

time

Link debounce time

<time>

Timer value (in milliseconds). Number range from=0 to=5000

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# link debounce time <NUMBER>

link debounce time <NUMBER>

Description: Configure link

Syntax:

debounce

Configure link debounce timer

time

Link debounce time

<time>

Timer value (in milliseconds). Number range from=0 to=5000

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# link debounce time <NUMBER>

link debounce time <NUMBER>

Description: Configure link

Syntax:

debounce

Configure link debounce timer

time

Link debounce time

<time>

Timer value (in milliseconds). Number range from=0 to=5000

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# link debounce time <NUMBER>

link debounce time <NUMBER>

Description: Configure link

Syntax:

debounce

Configure link debounce timer

time

Link debounce time

<time>

Timer value (in milliseconds). Number range from=0 to=5000

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# link debounce time <NUMBER>

lldp

lldp receive|transmit|both|default

Description: Configure Interface LLDP parameters on DVS uplink ports

Syntax:

receive

Enable LLDP reception

transmit

Enable LLDP transmission

both

Enable LLDP in both directions

default

Remove LLDP override policy

Command Mode: configure-dvs : Configure a VMware Domain as DVS type

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-dvs
(config-vmware-dvs)# lldp receive|transmit|both|default

lldp receive|transmit|both|default

Description: Configure Interface LLDP parameters on AVS uplink ports

Syntax:

receive

Enable LLDP reception

transmit

Enable LLDP transmission

both

Enable LLDP in both directions

default

Remove LLDP override policy

Command Mode: configure-avs : Configure a VMware Domain as AVS (N1K) type

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-avs
(config-vmware-avs)# lldp receive|transmit|both|default

lldp receive|transmit

Description: Configure Interface LLDP parameters

Syntax:

receive

Enable LLDP reception on interface

transmit

Enable LLDP transmission on interface

Command Mode: template policy-group : Configure Policy Group Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# lldp receive|transmit

lldp receive|transmit

Description: Configure Interface LLDP parameters

Syntax:

receive

Enable LLDP reception on interface

transmit

Enable LLDP transmission on interface

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# lldp receive|transmit

lldp receive|transmit

Description: Configure Interface LLDP parameters

Syntax:

receive

Enable LLDP reception on interface

transmit

Enable LLDP transmission on interface

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# lldp receive|transmit

lldp receive|transmit

Description: Configure Interface LLDP parameters

Syntax:

receive

Enable LLDP reception on interface

transmit

Enable LLDP transmission on interface

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# lldp receive|transmit

lldp receive|transmit

Description: Configure Interface LLDP parameters

Syntax:

receive

Enable LLDP reception on interface

transmit

Enable LLDP transmission on interface

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# lldp receive|transmit

lldp holdtime

lldp holdtime <NUMBER>

Description: Specify the hold time to be sent in LLDP packets

Syntax:

<10-255>

Holdtime in sec. Number range from=10 to=255

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# lldp holdtime <NUMBER>

lldp reinit

lldp reinit <NUMBER>

Description: Specify the delay for LLDP initialization on an interface

Syntax:

<1-10>

Reinit Delay in sec. Number range from=1 to=10

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# lldp reinit <NUMBER>

lldp timer

lldp timer <NUMBER>

Description: Specify the rate at which LLDP packets are sent

Syntax:

<5-254>

Rate of packets in sec. Number range from=5 to=254

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# lldp timer <NUMBER>

local-as

local-as <NUMBER> no-prepend|replace-as|dual-as

Description: Local Autonomous System Configuration for a BGP Peer

Syntax:

<1-4294967295>

The local autonomous system number. Number range from=1 to=4294967295

no-prepend

Do not prepend local-as to updates from ebgp peers

replace-as

Replace real AS with local AS in the EBGP updates

dual-as

Accept either real AS or local AS from the ebgp peer

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# local-as <NUMBER> no-prepend|replace-as|dual-as

locality

locality <WORD>

Description: Set The city or town of the organization.

Syntax:

<WORD>

city or town (Max Size 64)

Command Mode: csr : A csr mode to create and hold an SSL certificate

Command Path:

# configure [['terminal', 't']]
(config)# crypto keyring <WORD>
(config-keyring)# csr
(config-csr)# locality <WORD>

logfile

logfile [severity <severity>]

Description: Enable the logging to logfile

Syntax:

severity

(Optional) The severity level for the logs

Command Mode: logging : Logging server group configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# logging server-group <WORD>
(config-logging)# logfile [severity <severity>]

logging

logging server-group <WORD>

Description: Logging server group configuration mode

Syntax:

server-group

Logging Server-Group configuration

WORD

Logging server-group name (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# logging server-group <WORD>

logging audit

logging audit

Description: Enable audit and session logs to the policy

Command Mode: callhome : Callhome common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# logging audit

logging audit

Description: Enable audit logs to the policy

Command Mode: syslog : Syslog common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# syslog common
(config-syslog)# logging audit

logging description

logging description <WORD>

Description: Add description for syslog common

Syntax:

WORD

Description (Max Size 128) surrounded by single quotes

Command Mode: syslog : Syslog common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# syslog common
(config-syslog)# logging description <WORD>

logging event

logging event

Description: Enable event logs to the policy

Command Mode: callhome : Callhome common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# logging event

logging event

Description: Enable event logs to the policy

Command Mode: syslog : Syslog common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# syslog common
(config-syslog)# logging event

logging fault

logging fault

Description: Enable fault logs to the policy

Command Mode: callhome : Callhome common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# logging fault

logging fault

Description: Enable fault logs to the policy

Command Mode: syslog : Syslog common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# syslog common
(config-syslog)# logging fault

logging server-group

logging server-group <WORD>

Description: Logging server group configuration

Syntax:

WORD

Logging server-group name (Max Size 64)

Command Mode: syslog : Syslog common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# syslog common
(config-syslog)# logging server-group <WORD>

logging session

logging session

Description: Enable session logs to the policy

Command Mode: syslog : Syslog common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# syslog common
(config-syslog)# logging session

logging severity

logging severity info|notice|emergency|alert|critical|error|debug|warning

Description: Configure minimum severity level for logs generated

Syntax:

info

Info

notice

Notice

emergency

Emergency

alert

Alert

critical

Critical

error

Error

debug

Debug

warning

Warning

Command Mode: callhome : Callhome common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# logging severity info|notice|emergency|alert|critical|error|debug|warning

logging severity emergencies|debugging|critical|errors|warnings|information|alerts|notifications

Description: Configure minimum severity level for logs generated

Syntax:

emergencies

Emergencies

debugging

Debugging

critical

Critical

errors

Errors

warnings

Warnings

information

Information

alerts

Alerts

notifications

Notifications

Command Mode: syslog : Syslog common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# syslog common
(config-syslog)# logging severity emergencies|debugging|critical|errors|warnings|information|alerts|notifications

lsp-fast-flood

lsp-fast-flood

Description: Enables the ISIS LSP fast flood

Command Mode: isis : Intermediate System to Intermediate System (IS-IS)

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# isis fabric
(config-pod-isis)# lsp-fast-flood

lsp-gen-interval

lsp-gen-interval level-1 <NUMBER> <50-120000> <50-120000>

Description: Set the ISIS LSP generation maximal wait interval

Syntax:

level-1

Level 1

<50-120000>

LSP generation maximum wait interval. Number range from=50 to=120000

<50-120000> <50-120000>

Initial and secondary wait intervals (both values are required)

Command Mode: isis : Intermediate System to Intermediate System (IS-IS)

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# isis fabric
(config-pod-isis)# lsp-gen-interval level-1 <NUMBER> <50-120000> <50-120000>

lsp-mtu

lsp-mtu <NUMBER>

Description: Set the configuration of link-state packet (LSP) maximum transmission units (MTU) value

Syntax:

<256-4352>

The configuration of link-state packet (LSP) maximum transmission units (MTU).. Number range from=256 to=4352

Command Mode: isis : Intermediate System to Intermediate System (IS-IS)

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# isis fabric
(config-pod-isis)# lsp-mtu <NUMBER>

Chapter 12. M Commands

- mac-address

- match

- match arp

- match bridge-domain

- match community

- match icmp

- match ip

- match ipv6

- match prefix-list

- match raw

- match tcp

- match udp

- max-lsa

- max-validity-period

- max concurrent

- max running

- maximum-paths

- maximum-prefix

- mcp

- mcp action

- mcp enable

- mcp factor

- mcp init-delay

- mcp transmit-frequency

- member

- message-level

- message-size

- metric

- mgmt-epg

- microsoft-domain

- microsoft

- min-rx

- min-tx

- min

- mode

- modulus

- monitor

- monitor access

- monitor fabric

- monitor tenant

- monitor virtual

- mtu-ignore

- mtu

- multi-destination

- multi-site-mac-address

- multicast-address

- multiplier

mac-address

mac-address E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE

Description: Add a custom MAC address to the bridgedomain

Syntax:

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# mac-address E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE

mac-address E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE

Description: Manually set interface MAC address

Syntax:

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# mac-address E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE

mac-address E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE

Description: Configure mac Address

Syntax:

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# mac-address E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE

match

match dscp|dot1p <WORD> <WORD> [set-class <WORD>] [set-dscp <WORD>]

Description: Add a rule to match DSCP or DOT1P, queue the traffic and optionally mutate it

Syntax:

dscp

Match entry for DSCP

dot1p

Match entry for DOT1P

WORD

From of DSCP or DOT1P range

WORD

To of DSCP or DOT1P range

WORD

(Optional) Set the QOS class for the traffic

WORD

(Optional) DSCP rewrite

Command Mode: policy-map type qos : QOS policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type qos <WORD>
(config-tenant-pmap-qos)# match dscp|dot1p <WORD> <WORD> [set-class <WORD>] [set-dscp <WORD>]

match arp

match arp

Description: Match the ARP traffic

Command Mode: access-list : Create access-list

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# access-list <WORD>
(config-tenant-acl)# match arp

match bridge-domain

match bridge-domain <arg>

Description: Match subnets of a bridge-domain

Syntax:

arg

Command Mode: route-map : Create route-map or enter route-map command mode

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match bridge-domain <>

match community

match community <WORD>

Description: Configure community features

Syntax:

WORD

Name of community

Command Mode: route-map : Create route-map or enter route-map command mode

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match community <WORD>

match icmp

match icmp

Description: Match the ICMP traffic

Command Mode: access-list : Create access-list

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# access-list <WORD>
(config-tenant-acl)# match icmp

match ip

match ip

Description: Match the IP traffic

Command Mode: access-list : Create access-list

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# access-list <WORD>
(config-tenant-acl)# match ip

match ip <A.B.C.D/LEN> [shared]

Description: Add a subnet that identify hosts being part of the epg

Syntax:

A.B.C.D/LEN

IP prefix and network mask length

shared

(Optional) Add the shared scope to the existing scope for the subnet

Command Mode: external-l3 epg : External L3 EPG configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>]
(config-tenant-l3ext-epg)# match ip <A.B.C.D/LEN> [shared]

match ipv6

match ipv6 X:X:X:X::X/<0-128>

Description: Add a subnet that identify hosts being part of the epg

Syntax:

X:X:X:X::X/<0-128>

IPv6 prefix and network mask length

Command Mode: external-l3 epg : External L3 EPG configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>]
(config-tenant-l3ext-epg)# match ipv6 X:X:X:X::X/<0-128>

match prefix-list

match prefix-list <WORD>

Description: Match entries of a prefix-list

Syntax:

WORD

Name of prefix-list (Max Size 63)

Command Mode: route-map : Create route-map or enter route-map command mode

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD>

match raw

match raw <WORD> [tcpRules <tcpRules>] [arpOpc <arpOpc>] [applyToFrag <applyToFrag>] [dToPort <NUMBER>] [prot <NUMBER>] [icmpv4T <icmpv4T>] [stateful <stateful>] [icmpv6T <icmpv6T>] [sToPort <NUMBER>] [etherT <etherT>] [sFromPort <NUMBER>] [dFromPort <NUMBER>]

Description: Specify a raw vzEntry

Syntax:

WORD

Entry Name (Max Size 64)

tcpRules

(Optional) TCP Flags as comma separated values like val1,val2,..valN

arpOpc

(Optional) ARP Opcodes

applyToFrag

(Optional) Apply to Fragment

<0-65535>

(Optional) L4 Destination Port. Number range from=0 to=65535

<0-255>

(Optional) IP Protocol. Number range from=0 to=255

icmpv4T

(Optional) ICMP Type

stateful

(Optional) Stateful flag

icmpv6T

(Optional) ICMPv6 Type

<0-65535>

(Optional) L4 Source Port. Number range from=0 to=65535

etherT

(Optional) Ethernet Type

<0-65535>

(Optional) L4 Source Port. Number range from=0 to=65535

<0-65535>

(Optional) L4 Destination Port. Number range from=0 to=65535

Command Mode: access-list : Create access-list

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# access-list <WORD>
(config-tenant-acl)# match raw <WORD> [tcpRules <tcpRules>] [arpOpc <arpOpc>] [applyToFrag <applyToFrag>] [dToPort <NUMBER>] [prot <NUMBER>] [icmpv4T <icmpv4T>] [stateful <stateful>] [icmpv6T <icmpv6T>] [sToPort <NUMBER>] [etherT <etherT>] [sFromPort <NUMBER>] [dFromPort <NUMBER>]

match tcp

match tcp [src <from>-[<to>] contained in <0-65535>] [dest <from>-[<to>] contained in <0-65535>]

Description: Match TCP traffic

Syntax:

<from>-[<to>] contained in <0-65535>

(Optional) TCP Source port Range

<from>-[<to>] contained in <0-65535>

(Optional) TCP Destination port Range

Command Mode: access-list : Create access-list

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# access-list <WORD>
(config-tenant-acl)# match tcp [src <from>-[<to>] contained in <0-65535>] [dest <from>-[<to>] contained in <0-65535>]

match udp

match udp [src <from>-[<to>] contained in <0-65535>] [dest <from>-[<to>] contained in <0-65535>]

Description: Match UDP traffic

Syntax:

<from>-[<to>] contained in <0-65535>

(Optional) UDP Source port Range

<from>-[<to>] contained in <0-65535>

(Optional) UDP Destination port Range

Command Mode: access-list : Create access-list

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# access-list <WORD>
(config-tenant-acl)# match udp [src <from>-[<to>] contained in <0-65535>] [dest <from>-[<to>] contained in <0-65535>]

max-lsa

max-lsa <NUMBER> <NUMBER> reject|restart|log

Description: Feature to limit the number of non-self-originated LSAs

Syntax:

<1-4294967295>

Set maximum number of non self-generated LSAs. Number range from=1 to=4294967295

<1-100>

Threshold value (%) at which to generate a warning message. Number range from=1 to=100

reject

Reject LSAs beyond the limit

restart

Restart the neighbor

log

log a warning

Command Mode: template ospf vrf-policy : Configure Router OSPF Timer Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf vrf-policy <WORD> tenant <WORD>
(config-vrf-policy)# max-lsa <NUMBER> <NUMBER> reject|restart|log

max-validity-period

max-validity-period <NUMBER>

Description: Set The maximum validity period for a webtoken

Syntax:

<4-24>

Set The maximum validity period for a webtoken. Number range from=4 to=24

Command Mode: crypto webtoken : The cryptographic data used for generating and verifying web tokens.

Command Path:

# configure [['terminal', 't']]
(config)# crypto webtoken
(config-webtoken)# max-validity-period <NUMBER>

max concurrent

max concurrent nodes <NUMBER>

Description: Set the window maximum concurrent node limit

Syntax:

nodes

Maximum number of tasks that can be processed concurrently.

<0-65535>

Enter maximum number of concurrent nodes. 0 for unlimited. Number range from=0 to=65535

Command Mode: absolute : Absolute window configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# scheduler fabric|controller schedule <WORD>
(config-scheduler)# absolute window <WORD>
(config-scheduler-absolute)# max concurrent nodes <NUMBER>

max concurrent nodes <NUMBER>

Description: Set the window maximum concurrent node limit

Syntax:

nodes

Maximum number of tasks that can be processed concurrently.

<0-65535>

Enter maximum number of concurrent nodes. 0 for unlimited. Number range from=0 to=65535

Command Mode: recurring : Recurring window configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# scheduler fabric|controller schedule <WORD>
(config-scheduler)# recurring window <WORD>
(config-scheduler-recurring)# max concurrent nodes <NUMBER>

max running

max running time <TIME>

Description: Set the window maximum running time

Syntax:

time

Maximum running time

TIME

Enter the maximum running time in dd:hh:mm:ss. 0 for unlimited

Command Mode: absolute : Absolute window configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# scheduler fabric|controller schedule <WORD>
(config-scheduler)# absolute window <WORD>
(config-scheduler-absolute)# max running time <TIME>

max running time <TIME>

Description: Set the window maximum running time

Syntax:

time

Maximum running time in milliseconds

TIME

Enter the maximum running time in dd:hh:mm:ss. 0 for unlimited

Command Mode: recurring : Recurring window configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# scheduler fabric|controller schedule <WORD>
(config-scheduler)# recurring window <WORD>
(config-scheduler-recurring)# max running time <TIME>

maximum-paths

maximum-paths <NUMBER>

Description: Set the maximum ECMP for the OSPF protocol

Syntax:

<1-64>

Maximum paths. Number range from=1 to=64

Command Mode: template ospf vrf-policy : Configure Router OSPF Timer Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf vrf-policy <WORD> tenant <WORD>
(config-vrf-policy)# maximum-paths <NUMBER>

maximum-paths <NUMBER>

Description: Set EIGRP Maximum Path Limit

Syntax:

<1-32>

Maximum Path Limit. Number range from=1 to=32

Command Mode: template eigrp vrf-policy : Configure EIGRP VRF policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template eigrp vrf-policy <WORD> tenant <WORD>
(config-template-eigrp-vrf-pol)# maximum-paths <NUMBER>

maximum-paths <NUMBER>

Description: Set EIGRP Maximum Path Limit

Syntax:

<1-32>

Maximum Path Limit. Number range from=1 to=32

Command Mode: address-family : EIGRP Policy Address Family

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router eigrp default
(config-eigrp)# vrf member tenant <WORD> vrf <WORD>
(config-eigrp-vrf)# address-family ipv4|ipv6 unicast
(config-address-family)# maximum-paths <NUMBER>

maximum-prefix

maximum-prefix <NUMBER> [action <action>] [threshold <NUMBER>] [restart-time <NUMBER>]

Description: Maximum number of prefixes from this neighbor

Syntax:

<1-300000>

Max. prefix limit. Number range from=1 to=300000

<action>

(Optional) Action to be performed when the maximum prefix limit is reached

<1-100>

(Optional) The threshold % of the maximum number of prefixes before a warning is issued. Number range from=1 to=100

<1-65535>

(Optional) The period of time in minutes before restarting the peer when the prefix limit is reached. Number range from=1 to=65535

Command Mode: address-family : Configure an address-family for peer

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# address-family ipv4|ipv6 unicast
(config-leaf-bgp-vrf-neighbor-af)# maximum-prefix <NUMBER> [action <action>] [threshold <NUMBER>] [restart-time <NUMBER>]

mcp

mcp enable

Description: Configure MCP interface parameters

Syntax:

enable

Configure MCP parameters

Command Mode: template policy-group : Configure Policy Group Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# mcp enable

mcp enable

Description: Configure MCP interface parameters

Syntax:

enable

Configure MCP parameters

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# mcp enable

mcp enable

Description: Configure MCP interface parameters

Syntax:

enable

Configure MCP parameters

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# mcp enable

mcp enable

Description: Configure MCP interface parameters

Syntax:

enable

Configure MCP parameters

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# mcp enable

mcp enable

Description: Configure MCP interface parameters

Syntax:

enable

Configure MCP parameters

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# mcp enable

mcp action

mcp action port-disable

Description: Configure MCP Loop Protection Action

Syntax:

port-disable

Disable the port when MCP detects loop

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# mcp action port-disable

mcp enable

mcp enable key <WORD>

Description: Enable/Disable MCP Protocol

Syntax:

key

Configure MCP key

WORD

MCP key

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# mcp enable key <WORD>

mcp factor

mcp factor <NUMBER>

Description: Configure MCP Loop Detection Factor

Syntax:

<1-255>

MCP Loop Detection Multipication Factor. Number range from=1 to=255

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# mcp factor <NUMBER>

mcp init-delay

mcp init-delay <NUMBER>

Description: Configure MCP Loop Detection Init Delay Time

Syntax:

<0-1800>

MCP Loop Detection Init Delay Time. Number range from=0 to=1800

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# mcp init-delay <NUMBER>

mcp transmit-frequency

mcp transmit-frequency <NUMBER>

Description: Configure MCP Advertisement Transmit Frequency

Syntax:

<2-300>

MCP Advertisement Tx Frequency. Number range from=2 to=300

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# mcp transmit-frequency <NUMBER>

member

member device <WORD> device-interface <WORD>

Description: Configure Cluster Interface Member

Syntax:

device

Cluster Device

WORD

Cluster Device name (Max Size 64)

device-interface

Cluster Device Interface

WORD

Cluster Device Interface (Max Size 256)

Command Mode: cluster-interface : Configure L4-L7 Cluster Interface

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]
(config-cluster)# cluster-interface <WORD> [vlan <NUMBER>]
(config-cluster-interface)# member device <WORD> device-interface <WORD>

message-level

message-level info|notice|emergency|alert|critical|error|debug|warning

Description: Configure the urgency of the message

Syntax:

info

Info

notice

Notice

emergency

Emergency

alert

Alert

critical

Critical

error

Error

debug

Debug

warning

Warning

Command Mode: destination : Configure destination Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# destination-profile
(config-callhome-destnprof)# destination <WORD>
(config-callhome-destnprof-destn)# message-level info|notice|emergency|alert|critical|error|debug|warning

message-size

message-size <NUMBER>

Description: configure the size of the message

Syntax:

<size>

The size of the messages. Number range from=0 to=5000000

Command Mode: destination : Configure destination Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# destination-profile
(config-callhome-destnprof)# destination <WORD>
(config-callhome-destnprof-destn)# message-size <NUMBER>

metric

metric version 64bit

Description: Set EIGRP Metric Style

Syntax:

version

Metric Style

64bit

wide metric

Command Mode: template eigrp vrf-policy : Configure EIGRP VRF policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template eigrp vrf-policy <WORD> tenant <WORD>
(config-template-eigrp-vrf-pol)# metric version 64bit

metric version 64bit

Description: Set EIGRP Metric Style

Syntax:

version

Metric Style

64bit

wide metric

Command Mode: address-family : EIGRP Policy Address Family

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router eigrp default
(config-eigrp)# vrf member tenant <WORD> vrf <WORD>
(config-eigrp-vrf)# address-family ipv4|ipv6 unicast
(config-address-family)# metric version 64bit

mgmt-epg

mgmt-epg in-band|out-of-band <WORD>

Description: Select remote path management EPG

Syntax:

in-band

In-Band EPG

out-of-band

Out-of-Band EPG

WORD

Management EPG name

Command Mode: remote : Remote path configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# remote path <WORD>
(config-remote)# mgmt-epg in-band|out-of-band <WORD>

microsoft-domain

microsoft-domain <WORD>

Description: Create a VMM Microsoft Domain

Syntax:

WORD

VMM Microsoft Domain name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# microsoft-domain <WORD>

microsoft-domain member <WORD> [encap <WORD>] [deploy <WORD>] [push <WORD>]

Description: Associate EPG to a Microsoft Domain

Syntax:

member

Bind the EPG to a Microsoft domain

WORD

Microsoft Domain Name

WORD

(Optional) Enforce encap value. (For example vlan-10 or auto)

WORD

(Optional) Deployment mode

WORD

(Optional) Push mode

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# microsoft-domain member <WORD> [encap <WORD>] [deploy <WORD>] [push <WORD>]

microsoft

microsoft static-ip-pool <name> gateway <gwAddress>

Description: Configure static ip pool

Syntax:

static-ip-pool

Configure the static IP pool

name

enter the name of the static IP pool

gateway

Configure gateway address on interface

gwAddress

gwAddress

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# microsoft static-ip-pool <name> gateway <gwAddress>

min-rx

min-rx <NUMBER>

Description: Configure BFD MIN-RX value in milliseconds

Syntax:

<interval>

BFD interval. Number range from=50 to=999

Command Mode: template bfd : BFD group of commands

Command Path:

# configure [['terminal', 't']]
(config)# template bfd ip|ipv6 <WORD>
(config-bfd)# min-rx <NUMBER>

min-rx <NUMBER>

Description: Configure required Minimum Rx Interval in milliseconds

Syntax:

<interval>

Minimum Rx Interval. Number range from=50 to=999

Command Mode: template bfd : Configure BFD Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template bfd <WORD> tenant <WORD>
(config-template-bfd-pol)# min-rx <NUMBER>

min-tx

min-tx <NUMBER>

Description: Configure BFD MIN-TX value in milliseconds

Syntax:

<interval>

BFD interval. Number range from=50 to=999

Command Mode: template bfd : BFD group of commands

Command Path:

# configure [['terminal', 't']]
(config)# template bfd ip|ipv6 <WORD>
(config-bfd)# min-tx <NUMBER>

min-tx <NUMBER>

Description: Configure required Minimum Tx Interval in milliseconds

Syntax:

<interval>

Minimum Tx Interval. Number range from=50 to=999

Command Mode: template bfd : Configure BFD Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template bfd <WORD> tenant <WORD>
(config-template-bfd-pol)# min-tx <NUMBER>

min

min buffer <0-3>

Description: Set the minimum number of buffer of MTU size to be reserved

Syntax:

buffer

Number of minim buffers to reserve

<0-3>

Number of minim buffers to reserve

Command Mode: qos parameters : Configure the global QOS policies

Command Path:

# configure [['terminal', 't']]
(config)# qos parameters level1|level2|level3
(config-qos)# min buffer <0-3>

mode

mode atomic|best-effort

Description: Snapshot import mode atomic|best-effort

Syntax:

atomic

Atomic mode

best-effort

Best Effort mode

Command Mode: snapshot import : Configuration import setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot import <WORD>
(config-import)# mode atomic|best-effort

modulus

modulus <modulus>

Description: Set the length of the encryption keys

Syntax:

<modulus>

<modulus>

Command Mode: crypto keyring : A keyring mode to create and hold an SSL certificate

Command Path:

# configure [['terminal', 't']]
(config)# crypto keyring <WORD>
(config-keyring)# modulus <modulus>

monitor

monitor virtual session <WORD>

Description: Configure a monitor session

Syntax:

virtual

virtual

session

session

WORD

session name (Max Size 64)

Command Mode: configure-avs : Configure a VMware Domain as AVS (N1K) type

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-avs
(config-vmware-avs)# monitor virtual session <WORD>

monitor access

monitor access session <session_name>

Description: Configue monitor session for access interfaces

Syntax:

session

session

session_name

session name (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>

monitor fabric

monitor fabric session <session_name>

Description: Configue monitor session for fabric interfaces

Syntax:

session

session

session_name

session name (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# monitor fabric session <session_name>

monitor tenant

monitor tenant <tenant_name> session <session_name>

Description: Configue monitor session for tenant EPGs

Syntax:

tenant_name

tenant name (Max Size 63)

session

session

session_name

session name (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# monitor tenant <tenant_name> session <session_name>

monitor virtual

monitor virtual session <WORD>

Description: Configure monitor session for virtual switches

Syntax:

session

session

WORD

Session name (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# monitor virtual session <WORD>

mtu-ignore

mtu-ignore

Description: Set OSPF Interface Policy Controls

Command Mode: template ospf interface-policy : Configure OSPF Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf interface-policy <WORD> tenant <WORD>
(config-interface-policy)# mtu-ignore

mtu

mtu <1500-9216>

Description: Set the MTU for this class of service

Syntax:

<1500-9216>

MTU value

Command Mode: qos parameters : Configure the global QOS policies

Command Path:

# configure [['terminal', 't']]
(config)# qos parameters level1|level2|level3
(config-qos)# mtu <1500-9216>

mtu <NUMBER>

Description: Set the interface Maximum Transmission Unit (MTU)

Syntax:

<576-9000>

Interface MTU. Number range from=576 to=9000

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# mtu <NUMBER>

mtu <NUMBER>

Description: Set the interface Maximum Transmission Unit (MTU)

Syntax:

<576-9000>

Interface MTU. Number range from=576 to=9000

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# mtu <NUMBER>

mtu <mtu>

Description: MTU size

Syntax:

mtu

mtu value. Number range from=64 to=9216

Command Mode: destination tenant : Configure monitor remote destination

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>
(config-monitor-access-dest)# mtu <mtu>

mtu <mtu>

Description: MTU size

Syntax:

mtu

mtu value. Number range from=64 to=9216

Command Mode: destination : Configure monitor remote destination

Command Path:

# configure [['terminal', 't']]
(config)# monitor fabric session <session_name>
(config-monitor-fabric)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>
(config-monitor-fabric-dest)# mtu <mtu>

mtu <arg>

Description: MTU size

Syntax:

arg

mtu value. Number range from=64 to=9216

Command Mode: destination : Configure monitor remote destination

Command Path:

# configure [['terminal', 't']]
(config)# monitor tenant <tenant_name> session <session_name>
(config-monitor-tenant)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>
(config-monitor-tenant-dest)# mtu <>

mtu <arg>

Description: Configure MTU size

Syntax:

arg

MTU value. Number range from=64 to=9216

Command Mode: destination destip : Configure monitor remote destination

Command Path:

# configure [['terminal', 't']]
(config)# monitor virtual session <WORD>
(config-monitor-virtual)# destination destip <A.B.C.D>
(config-monitor-virtual-remote-dest)# mtu <>

multi-destination

multi-destination <WORD>

Description: Change behavior for multi destination flood

Syntax:

WORD

Unknown multicast MAC and Broadcast handling

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# multi-destination <WORD>

multi-site-mac-address

multi-site-mac-address E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE

Description: Configure multi-site MAC address

Syntax:

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# multi-site-mac-address E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE

multicast-address

multicast-address <IP>

Description: Configure outgoing multicast IP address for VXLAN modes

Syntax:

IP

Multicast IP

Command Mode: configure-avs : Configure a VMware Domain as AVS (N1K) type

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-avs
(config-vmware-avs)# multicast-address <IP>

multiplier

multiplier <NUMBER>

Description: Configure BFD MULTIPLIER value

Syntax:

<interval>

BFD interval. Number range from=1 to=50

Command Mode: template bfd : BFD group of commands

Command Path:

# configure [['terminal', 't']]
(config)# template bfd ip|ipv6 <WORD>
(config-bfd)# multiplier <NUMBER>

multiplier <NUMBER>

Description: Configure detection multiplier

Syntax:

<interval>

Detection multiplier. Number range from=1 to=50

Command Mode: template bfd : Configure BFD Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template bfd <WORD> tenant <WORD>
(config-template-bfd-pol)# multiplier <NUMBER>

Chapter 13. N Commands

- name-lookup

- negotiate

- neighbor

- network

- next-hop-self

- ntp

name-lookup

name-lookup

Description: Display OSPF router ids as DNS names

Command Mode: template ospf vrf-policy : Configure Router OSPF Timer Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf vrf-policy <WORD> tenant <WORD>
(config-vrf-policy)# name-lookup

negotiate

negotiate auto

Description: Configure link negotiation parameters

Syntax:

auto

Configure auto-negotiation

Command Mode: template policy-group : Configure Policy Group Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# negotiate auto

negotiate auto

Description: Configure link negotiation parameters

Syntax:

auto

Configure auto-negotiation

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# negotiate auto

negotiate auto

Description: Configure link negotiation parameters

Syntax:

auto

Configure auto-negotiation

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# negotiate auto

negotiate auto

Description: Configure link negotiation parameters

Syntax:

auto

Configure auto-negotiation

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# negotiate auto

negotiate auto

Description: Configure link negotiation parameters

Syntax:

auto

Configure auto-negotiation

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# negotiate auto

neighbor

neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]

Description: Configure a BGP neighbor

Syntax:

A.B.C.D

IP address of the neighbor

A.B.C.D/LEN

IP prefix for neighbors

A:B::C:D

IPv6 address of the neighbor

A:B::C:D/LEN

IPv6 prefix for neighbors

WORD

(Optional) Route-Map Name (API-configured L3Out Name)

Command Mode: vrf : Virtual Router Context

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]

network

network bcast|p2p|unspecified

Description: Set OSPF interface policy network type

Syntax:

bcast

The OSPF interface policy network type. OSPF supports point-to-point and broadcast.

p2p

The OSPF interface policy network type. OSPF supports point-to-point and broadcast.

unspecified

The OSPF interface policy network type. OSPF supports point-to-point and broadcast.

Command Mode: template ospf interface-policy : Configure OSPF Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf interface-policy <WORD> tenant <WORD>
(config-interface-policy)# network bcast|p2p|unspecified

next-hop-self

next-hop-self

Description: Set our peering address as nexthop

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# next-hop-self

ntp

ntp

Description: Configure the default ntp policy

Command Mode: pod : Pod configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# ntp

Chapter 14. O Commands

- oob-mgmt

- oob-mgmt epg

- optimize

- option

- org-name

- org-unit-name

oob-mgmt

oob-mgmt epg <epgval>

Description: Creates/Modify the out of band mgmt under the tenant mgmt

Syntax:

epg

epg is keyword ,refers to out of band epg

epgval

epg name for the out of band epg created/modified under tenant mgmt

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# oob-mgmt epg <epgval>

oob-mgmt epg

oob-mgmt epg <WORD>

Description: Associate node to a Out of band EPG

Syntax:

WORD

Out of band End Point Group Name

Command Mode: interface mgmt0 : Out of band management interface

Command Path:

# configure [['terminal', 't']]
(config)# controller
(config-controller)# interface mgmt0
(config-controller-if)# oob-mgmt epg <WORD>

oob-mgmt epg <WORD>

Description: Associate node to a Out of band EPG

Syntax:

WORD

Out of band End Point Group Name

Command Mode: interface mgmt0 : Out of band management interface

Command Path:

# configure [['terminal', 't']]
(config)# switch
(config-switch)# interface mgmt0
(config-switch-if)# oob-mgmt epg <WORD>

optimize

optimize subinterface

Description: Disable sub-interface optimization

Syntax:

subinterface

subinterface

Command Mode: template bfd : Configure BFD Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template bfd <WORD> tenant <WORD>
(config-template-bfd-pol)# optimize subinterface

option

option <WORD> id <NUMBER> data <WORD>

Description: Add or modify an existing DHCP option when relayed from the server to the client

Syntax:

WORD

Name of the option to add (Max Size 64)

id

ID of the option

<0-255>

ID of the option. Number range from=0 to=255

data

Body of the Option TLV as hex string

WORD

Body of the Option TLV as hex string, surrounded by single quotes ex: 'foo*' (Max Size 256)

Command Mode: template dhcp option : Create a DHCP Option policy

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template dhcp option policy <WORD>
(config-tenant-template-dhcp-option)# option <WORD> id <NUMBER> data <WORD>

org-name

org-name <WORD>

Description: Set The full legal name of the organization.

Syntax:

<WORD>

legal name of organization (Max Size 64)

Command Mode: csr : A csr mode to create and hold an SSL certificate

Command Path:

# configure [['terminal', 't']]
(config)# crypto keyring <WORD>
(config-keyring)# csr
(config-csr)# org-name <WORD>

org-unit-name

org-unit-name <WORD>

Description: Set the department or unit name within the organization

Syntax:

<WORD>

department or unit name (Max Size 64)

Command Mode: csr : A csr mode to create and hold an SSL certificate

Command Path:

# configure [['terminal', 't']]
(config)# crypto keyring <WORD>
(config-keyring)# csr
(config-csr)# org-unit-name <WORD>

Chapter 15. P Commands

- passive-interface

- passphrase

- password

- password change-count

- password change-during-interval

- password change-interval

- password history-count

- password no-change-interval

- password pwd-strength-check

- path

- peer-dead-interval

- periodic-inventory notification

- phone-contact

- phone

- pod

- policy-group

- policy-map

- policy-map type data-plane

- policy-map type qos

- port

- porttrack delay

- porttrack minlinks

- porttrack state

- power

- prefix-suppression

- preview

- priority

- priv-type

- priv

- private-as-control

- protocol

- pwd-lifetime

passive-interface

passive-interface

Description: Set OSPF Interface Policy Controls

Command Mode: template ospf interface-policy : Configure OSPF Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf interface-policy <WORD> tenant <WORD>
(config-interface-policy)# passive-interface

passphrase

passphrase <WORD>

Description: Configure passphrase for AES encryption

Syntax:

WORD

Passphrase for AES encryption (Range of chars: 16-32) in quotes (Max Size 32)

Command Mode: crypto aes : AES encryption configuration

Command Path:

# configure [['terminal', 't']]
(config)# crypto aes
(config-aes)# passphrase <WORD>

password

password <WORD>

Description: Set The system user password.

Syntax:

WORD

Change user password (Max Size 256) - Only for admin use

Command Mode: username : Create a locally-authenticated user account

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# password <WORD>

password <WORD>

Description: Set The new password.

Syntax:

<WORD>

new password

Command Mode: csr : A csr mode to create and hold an SSL certificate

Command Path:

# configure [['terminal', 't']]
(config)# crypto keyring <WORD>
(config-keyring)# csr
(config-csr)# password <WORD>

password WORD

Description: Configure a password for neighbor

Syntax:

WORD

Enter Clear-text password

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# password WORD

password change-count

password change-count <NUMBER>

Description: Set the number of password changes allowed within change interval

Syntax:

<0-10>

Set the number of password changes allowed within change interval. Number range from=0 to=10

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# password change-count <NUMBER>

password change-during-interval

password change-during-interval <change-during-interval>

Description: Set change count/interval policy selector for enforcing password change.

Syntax:

<change-during-interval>

<change-during-interval>

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# password change-during-interval <change-during-interval>

password change-interval

password change-interval <NUMBER>

Description: Set time interval for limiting the number of password changes (unit: Hours)

Syntax:

<1-745>

Set A time interval for limiting the number of password changes (unit: Hours). Number range from=1 to=745

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# password change-interval <NUMBER>

password history-count

password history-count <NUMBER>

Description: Set number of retired passwords to store in user's history.

Syntax:

<0-15>

Set number of retired passwords to store in user history.. Number range from=0 to=15

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# password history-count <NUMBER>

password no-change-interval

password no-change-interval <NUMBER>

Description: Set minimum period before which user cannot change password again (unit: hours)

Syntax:

<1-745>

Set minimum period before which user cannot change password again (unit: hours). Number range from=1 to=745

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# password no-change-interval <NUMBER>

password pwd-strength-check

password pwd-strength-check

Description: Enforces the strength of password for all users

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# password pwd-strength-check

path

path ftp|sftp|scp <HOST> [port <NUMBER>] [remote-directory <PATH>]

Description: Configure remote path properties

Syntax:

ftp

FTP

sftp

Secure FTP

scp

Secure copy

HOST

Remote host name or IP address

<0-65535>

(Optional) Remote port. Number range from=0 to=65535

PATH

(Optional) Remote directory: path/to/some/dir

Command Mode: remote : Remote path configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# remote path <WORD>
(config-remote)# path ftp|sftp|scp <HOST> [port <NUMBER>] [remote-directory <PATH>]

peer-dead-interval

peer-dead-interval <NUMBER>

Description: Configure Peer dead Interval

Syntax:

<5-600>

Peer dead Interval value. Number range from=5 to=600

Command Mode: vpc domain explicit : Pair two leaf nodes explicitly

Command Path:

# configure [['terminal', 't']]
(config)# vpc domain explicit <NUMBER> leaf <101-4000> <101-4000>
(config-vpc)# peer-dead-interval <NUMBER>

periodic-inventory notification

periodic-inventory notification schedule <schedName>

Description: Configure periodic notifications Parameters

Syntax:

schedule

Configure periodic notification scheduler

<schedName>

scheduler name

Command Mode: callhome : Callhome common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# periodic-inventory notification schedule <schedName>

phone-contact

phone-contact <WORD>

Description: The contact phone number

Syntax:

WORD

Phone number in international format(such as +1-800-123-4567) (Max Size 512)

Command Mode: destination-profile : Configure destination profile Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# destination-profile
(config-callhome-destnprof)# phone-contact <WORD>

phone

phone <WORD>

Description: Set The phone number of the locally-authenticated user.

Syntax:

WORD

phone number (Max Size 512)

Command Mode: username : Create a locally-authenticated user account

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# phone <WORD>

pod

pod 1

Description: Pod configuration mode

Syntax:

1

Enter Pod ID

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# pod 1

policy-group

policy-group <WORD>

Description: Associate an Interface Policy Group to this Interface Group

Syntax:

WORD

Interface Policy Group Name (Max Size 64)

Command Mode: leaf-interface-group : Configure Leaf Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# leaf-interface-profile <WORD>
(config-leaf-if-profile)# leaf-interface-group <WORD>
(config-leaf-if-group)# policy-group <WORD>

policy-group <WORD>

Description: Configure Policy Group on the Fex

Syntax:

WORD

Interface Policy Group Name (Max Size 64)

Command Mode: fex-interface-group : Configure Fex Interface Group

Command Path:

# configure [['terminal', 't']]
(config)# fex-profile <WORD>
(config-fex-profile)# fex-interface-group <WORD>
(config-fex-if-group)# policy-group <WORD>

policy-group <WORD> [force]

Description: Configure Policy Group

Syntax:

WORD

Interface Policy Group Name (Max Size 64)

force

(Optional) Delete Per Port Configuration and apply the existing policy-group config

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# policy-group <WORD> [force]

policy-map

policy-map type data-plane <WORD>

Description: Create a policymap of DataPlane type to police/reclassify the traffic

Syntax:

type

Type of the Qos Policy

data-plane

QOS policy for Data Plane Policing

WORD

Name of the policy-map to add (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>

policy-map type data-plane

policy-map type data-plane <WORD>

Description: data-plane policy type

Syntax:

type

Policy Type

WORD

Name of the policy-map to add (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>

policy-map type qos

policy-map type qos <WORD>

Description: QOS policy type

Syntax:

type

Policy Type

WORD

Name of the policy-map to add (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type qos <WORD>

port

port <NUMBER>

Description: LDAP server port for authentication

Syntax:

<1-65535>

Port number. Number range from=1 to=65535

Command Mode: ldap-server host : LDAP server DNS name or IP address

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# port <NUMBER>

port <NUMBER>

Description: RADIUS server port for authentication

Syntax:

<1-65535>

RADIUS server port for authentication. Number range from=1 to=65535

Command Mode: radius-server host : RADIUS server's DNS name or its IP address

Command Path:

# configure [['terminal', 't']]
(config)# radius-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# port <NUMBER>

port <NUMBER>

Description: TACACS server port for authentication

Syntax:

<1-65535>

RADIUS server port for authentication. Number range from=1 to=65535

Command Mode: tacacs-server host : TACACS+ server's DNS name or its IP address

Command Path:

# configure [['terminal', 't']]
(config)# tacacs-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# port <NUMBER>

port <NUMBER>

Description: Set the port used for SSH communication service.

Syntax:

<0-65535>

Set the port used for SSH communication service.. Number range from=0 to=65535

Command Mode: ssh-service : SSH communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# ssh-service
(config-ssh-service)# port <NUMBER>

port <NUMBER>

Description: Set the port used for TELNET communication service.

Syntax:

<0-65535>

Set the port used for TELNET communication service.. Number range from=0 to=65535

Command Mode: telnet : TELNET communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# telnet
(config-telnet)# port <NUMBER>

port <NUMBER>

Description: Set the port used for HTTP communication service.

Syntax:

<1-65535>

Set the port used for HTTP communication service.. Number range from=1 to=65535

Command Mode: http : HTTP communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# http
(config-http)# port <NUMBER>

port <NUMBER>

Description: Set the port used for HTTPS communication service

Syntax:

<1-65535>

Set the port used for HTTPS communication service. Number range from=1 to=65535

Command Mode: https : HTTPS communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# https
(config-https)# port <NUMBER>

porttrack delay

porttrack delay <1-300>

Description: Set Port Tracking Delay

Syntax:

<1-300>

Delay value

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# porttrack delay <1-300>

porttrack minlinks

porttrack minlinks <0-12>

Description: Set Port Tracking minimum links left up before trigger

Syntax:

<0-12>

Minlinks Value

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# porttrack minlinks <0-12>

porttrack state

porttrack state on

Description: Set Port Tracking State

Syntax:

on

To enable port tracking state

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# porttrack state on

power

power redundancy-policy <WORD>

Description: Create a power supply redundancy policy

Syntax:

redundancy-policy

Create a power supply redundancy policy

WORD

Power supply redundancy policy name (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# power redundancy-policy <WORD>

prefix-suppression

prefix-suppression

Description: Suppress prefixes

Command Mode: template ospf vrf-policy : Configure Router OSPF Timer Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf vrf-policy <WORD> tenant <WORD>
(config-vrf-policy)# prefix-suppression

preview

preview

Description: Rollback preview mode

Command Mode: snapshot rollback : Configuration rollback setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot rollback <WORD>
(config-rollback)# preview

priority

priority <NUMBER>

Description: Set OSPF interface priority used to determine the designated router (DR) on a specific network

Syntax:

<0-255>

OSPF priority. Number range from=0 to=255

Command Mode: template ospf interface-policy : Configure OSPF Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf interface-policy <WORD> tenant <WORD>
(config-interface-policy)# priority <NUMBER>

priv-type

priv-type <privType>

Description: Set the AAA domain role to set privilege bitmask of a user domain

Syntax:

<privType>

<privType>

Command Mode: role : Create the AAA domain role to set privilege bitmask of a user domain

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# domain <WORD>
(config-domain)# role <WORD>
(config-role)# priv-type <privType>

priv

priv <privileges>

Description: Set privileges (comma separated values)

Syntax:

<privileges>

Privileges as comma separated values like val1,val2,..valN

Command Mode: rbac role : Create AAA role, attributes and privileges for user authorization

Command Path:

# configure [['terminal', 't']]
(config)# rbac role <WORD>
(config-role)# priv <privileges>

private-as-control

private-as-control remove-exclusive|remove-exclusive-all|remove-exclusive-all-replace-as

Description: Private AS Control

Syntax:

remove-exclusive

Remove private AS

remove-exclusive-all

Remove all private AS

remove-exclusive-all-replace-as

Replace private AS with local AS

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# private-as-control remove-exclusive|remove-exclusive-all|remove-exclusive-all-replace-as

protocol

protocol <protocol>

Description: RADIUS server protocol for authentication

Syntax:

<protocol>

<protocol>

Command Mode: radius-server host : RADIUS server's DNS name or its IP address

Command Path:

# configure [['terminal', 't']]
(config)# radius-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# protocol <protocol>

protocol <WORD>

Description: Set the TACACS+ authentication protocol

Syntax:

WORD

TACACS+ authentication protocol

Command Mode: tacacs-server host : TACACS+ server's DNS name or its IP address

Command Path:

# configure [['terminal', 't']]
(config)# tacacs-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# protocol <WORD>

pwd-lifetime

pwd-lifetime <NUMBER>

Description: Set The lifetime of the user password (0 = No password expiration)

Syntax:

<0-3650>

lifetime of locally-authenticated user password. Number range from=0 to=3650

Command Mode: username : Create a locally-authenticated user account

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# pwd-lifetime <NUMBER>

Chapter 16. Q Commands

- qos parameters

- qos preserve

- query-cluster-health

- query-cluster-statistics

- query-cluster-validation

- query-profile

- query

- queue control

- queue limit

qos parameters

qos parameters level1|level2|level3

Description: Configure the global QOS policies

Syntax:

level1

Set parameters for level1

level2

Set parameters for level2

level3

Set parameters for level3

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# qos parameters level1|level2|level3

qos preserve

qos preserve cos

Description: Preserve incoming qos value in the frame

Syntax:

cos

IEEE 802.1P class of service.

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# qos preserve cos

query-cluster-health

query-cluster-health

Description: Re-query for Cluster Health

Command Mode: l4l7 cluster name : Add a L4-L7 Service Device Cluster

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]
(config-cluster)# query-cluster-health

query-cluster-statistics

query-cluster-statistics

Description: Re-query for Cluster Statistics

Command Mode: l4l7 cluster name : Add a L4-L7 Service Device Cluster

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]
(config-cluster)# query-cluster-statistics

query-cluster-validation

query-cluster-validation

Description: Re-query for Cluster Validation

Command Mode: l4l7 cluster name : Add a L4-L7 Service Device Cluster

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]
(config-cluster)# query-cluster-validation

query-profile

query-profile

Description: Configure Query profile Parameters

Command Mode: callhome : Callhome common policy configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# query-profile

query

query <WORD> type dn|class <dn/classname>

Description: Configure Query profile Parameters

Syntax:

WORD

Query name (Max Size 16)

type

type

dn

Dn

class

Class

<dn/classname>

The class or DN name

Command Mode: query-profile : Configure Query profile Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# query-profile
(config-callhome-queryprof)# query <WORD> type dn|class <dn/classname>

queue control

queue control dynamic

Description: Set the queueing control method

Syntax:

dynamic

Dynamic allocation of queue resources

Command Mode: qos parameters : Configure the global QOS policies

Command Path:

# configure [['terminal', 't']]
(config)# qos parameters level1|level2|level3
(config-qos)# queue control dynamic

queue limit

queue limit <1500-9216>

Description: Set the limit for the policing queue

Syntax:

<1500-9216>

Queue limit size

Command Mode: qos parameters : Configure the global QOS policies

Command Path:

# configure [['terminal', 't']]
(config)# qos parameters level1|level2|level3
(config-qos)# queue limit <1500-9216>

Chapter 17. R Commands

- radius-server host

- radius-server retries

- radius-server timeout

- rbac role

- rbac rule

- rbac security-domain

- realm

- recurring

- redirect

- redistribute

- redundancy-mode

- region

- reload controller

- reload switch

- remote-as

- remote

- request-status-count

- reset-to-factory

- response-incl

- response-subtree

- retransmit-interval

- retries

- revision

- role

- route-map

- route-profile

- route-reflector

- router-id

- router bgp

- router eigrp

- router ospf

- rtr-cfg

- run-mode

radius-server host

radius-server host <A.B.C.D|A:B::C:D|WORD>

Description: RADIUS server's DNS name or its IP address

Syntax:

A.B.C.D|A:B::C:D|WORD

Provide a hostname or IPV4/IPV6 address

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# radius-server host <A.B.C.D|A:B::C:D|WORD>

radius-server retries

radius-server retries <NUMBER>

Description: Global RADIUS server retransmit count

Syntax:

<0-5>

Global RADIUS server retransmit count. Number range from=0 to=5

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# radius-server retries <NUMBER>

radius-server timeout

radius-server timeout <NUMBER>

Description: Global RADIUS server timeout period in seconds

Syntax:

<1-60>

Global RADIUS server timeout period in seconds. Number range from=1 to=60

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# radius-server timeout <NUMBER>

rbac role

rbac role <WORD>

Description: Create AAA role, attributes and privileges for user authorization

Syntax:

WORD

Provide AAA Security domain role name (Max Size 32)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# rbac role <WORD>

rbac rule

rbac rule <DN> <WORD>

Description: Create RBAC rule, security domain users can read subtree starting at specific object

Syntax:

DN

Provide RBAC Rule ObjectDN string

WORD

Provide RBAC Rule domain name (Max Size None)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# rbac rule <DN> <WORD>

rbac security-domain

rbac security-domain <WORD>

Description: Create AAA security domain for processing authentication requests.

Syntax:

WORD

Provide AAA Security domain name (Max Size 32)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# rbac security-domain <WORD>

realm

realm <realm>

Description: Specify server realm

Syntax:

<realm>

<realm>

Command Mode: aaa authentication login console : Configure console methods

Command Path:

# configure [['terminal', 't']]
(config)# aaa authentication login console
(config-console)# realm <realm>

realm <realm>

Description: Specify server realm

Syntax:

<realm>

<realm>

Command Mode: aaa authentication login default : Configure default methods

Command Path:

# configure [['terminal', 't']]
(config)# aaa authentication login default
(config-default)# realm <realm>

realm <realm>

Description: Specify server realm

Syntax:

<realm>

<realm>

Command Mode: aaa authentication login domain : Configure domain methods

Command Path:

# configure [['terminal', 't']]
(config)# aaa authentication login domain <WORD>
(config-domain)# realm <realm>

recurring

recurring window <WORD>

Description: Recurring window configuration mode

Syntax:

window

Configure a schedule window

WORD

Window name (Max size 31)

Command Mode: scheduler : Scheduler configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# scheduler fabric|controller schedule <WORD>
(config-scheduler)# recurring window <WORD>

redirect

redirect

Description: Enable the state of the HTTP redirect state

Command Mode: http : HTTP communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# http
(config-http)# redirect

redistribute

redistribute ospf|eigrp route-map <WORD>

Description: Redistribute route map

Syntax:

ospf

Redistribute OSPF

eigrp

Redistribute EIGRP

route-map

Route map to redistribute to

WORD

Route map name

Command Mode: vrf : Virtual Router Context

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# redistribute ospf|eigrp route-map <WORD>

redundancy-mode

redundancy-mode combined|ps-redundant|redundant

Description: Configure power supply redundancy mode

Syntax:

combined

Combined mode to use output of all available PS

ps-redundant

PS redundant mode (N+1) to enable power output redundancy

redundant

Redundant mode (N+N) for a single PS to power the system

Command Mode: power : Create a power supply redundancy policy

Command Path:

# configure [['terminal', 't']]
(config)# power redundancy-policy <WORD>
(config-power)# redundancy-mode combined|ps-redundant|redundant

region

region <WORD>

Description: STP MST region configuration mode

Syntax:

WORD

MST region name

Command Mode: spanning-tree : STP MST configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# spanning-tree mst configuration
(config-stp)# region <WORD>

reload controller

reload controller <NUMBER>

Description: Reload controller

Syntax:

<1-32>

Controller id. Number range from=1 to=32

Command Mode: exec : Exec Mode

Command Path:

# reload controller <NUMBER>

reload switch

reload switch <NUMBER>

Description: Reload switch

Syntax:

<101-4000>

Switch id. Number range from=101 to=4000

Command Mode: exec : Exec Mode

Command Path:

# reload switch <NUMBER>

remote-as

remote-as <NUMBER>

Description: Specify Autonomous System Number of the neighbor

Syntax:

<1-4294967295>

The Remote autonomous system number. Number range from=1 to=4294967295

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# remote-as <NUMBER>

remote

remote path <WORD>

Description: Remote path configuration mode

Syntax:

path

Configure remote path

WORD

Remote path configuration name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# remote path <WORD>

remote path <WORD>

Description: Set the remote path configuration will get downloaded from

Syntax:

path

Assign remote path

WORD

Remote path name

Command Mode: snapshot download : Configuration snapshot download setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot download <WORD>
(config-download)# remote path <WORD>

remote path <WORD>

Description: Set the remote path configuration will get exported to

Syntax:

path

Configure remote path

WORD

Remote path name

Command Mode: snapshot export : Configuration export setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot export <WORD>
(config-export)# remote path <WORD>

remote path <WORD>

Description: Set the remote path configuration will get imported from

Syntax:

path

Assign remote path

WORD

Remote path name

Command Mode: snapshot import : Configuration import setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot import <WORD>
(config-import)# remote path <WORD>

remote path <WORD>

Description: Set the remote path configuration will get uploaded to

Syntax:

path

Assign remote path

WORD

Remote path name

Command Mode: snapshot upload : Configuration snapshot upload setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot upload <WORD>
(config-upload)# remote path <WORD>

request-status-count

request-status-count <NUMBER>

Description: Set the maximum count of HTTP requests to track.

Syntax:

<count>

Set the maximum count of HTTP requests to track.. Number range from=0 to=10240

Command Mode: http : HTTP communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# http
(config-http)# request-status-count <NUMBER>

request-status-count <NUMBER>

Description: Set the maximum count of HTTPS requests to track

Syntax:

<count>

Set the maximum count of HTTPS requests to track.. Number range from=0 to=10240

Command Mode: https : HTTPS communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# https
(config-https)# request-status-count <NUMBER>

reset-to-factory

reset-to-factory

Description: Reset role to factory default privileges

Command Mode: rbac role : Create AAA role, attributes and privileges for user authorization

Command Path:

# configure [['terminal', 't']]
(config)# rbac role <WORD>
(config-role)# reset-to-factory

response-incl

response-incl <respincl>

Description: Configure response subtree which needs to be included

Syntax:

<respincl>

The response subtree to be included

Command Mode: query : Configure Query profile Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# query-profile
(config-callhome-queryprof)# query <WORD> type dn|class <dn/classname>
(config-callhome-queryprof-query)# response-incl <respincl>

response-subtree

response-subtree full|children|no

Description: Configure response-subtree

Syntax:

full

Full

children

Children

no

No

Command Mode: query : Configure Query profile Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# query-profile
(config-callhome-queryprof)# query <WORD> type dn|class <dn/classname>
(config-callhome-queryprof-query)# response-subtree full|children|no

retransmit-interval

retransmit-interval <NUMBER>

Description: Set the interval between LSA retransmissions

Syntax:

<1-65535>

Interval in seconds. Number range from=1 to=65535

Command Mode: template ospf interface-policy : Configure OSPF Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf interface-policy <WORD> tenant <WORD>
(config-interface-policy)# retransmit-interval <NUMBER>

retries

retries <NUMBER>

Description: LDAP server retries for authentication

Syntax:

<0-5>

LDAP server retries for authentication. Number range from=0 to=5

Command Mode: ldap-server host : LDAP server DNS name or IP address

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# retries <NUMBER>

retries <0-5>

Description: RADIUS server retries for authentication

Syntax:

<0-5>

RADIUS server retries for authentication

Command Mode: radius-server host : RADIUS server's DNS name or its IP address

Command Path:

# configure [['terminal', 't']]
(config)# radius-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# retries <0-5>

retries <NUMBER>

Description: TACACS server retries for authentication

Syntax:

<0-5>

TACACS server retries for authentication. Number range from=0 to=5

Command Mode: tacacs-server host : TACACS+ server's DNS name or its IP address

Command Path:

# configure [['terminal', 't']]
(config)# tacacs-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# retries <NUMBER>

revision

revision <NUMBER>

Description: Set the MST region revision number

Syntax:

<0-65535>

MST region revision number. Number range from=0 to=65535

Command Mode: region : STP MST region configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# spanning-tree mst configuration
(config-stp)# region <WORD>
(config-stp-region)# revision <NUMBER>

role

role <WORD>

Description: Create the AAA domain role to set privilege bitmask of a user domain

Syntax:

WORD

User role

Command Mode: domain : Create the AAA domain to which the user belongs.

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# domain <WORD>
(config-domain)# role <WORD>

route-map

route-map <WORD>

Description: Create route-map or enter route-map command mode

Syntax:

WORD

Route-map name (Max Size 64)

Command Mode: vrf : Configure VRF parameters

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>

route-map <WORD> in|out

Description: Apply route-map to neighbor

Syntax:

WORD

Route Map Name (Max Size 63)

in

Apply policy to incoming routes

out

Apply policy to outgoing routes

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# route-map <WORD> in|out

route-profile

route-profile <WORD>

Description: Configure route-profile

Syntax:

WORD

Route profile name

Command Mode: vrf : Configuration for vrf

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# route-profile <WORD>

route-profile <WORD>

Description: Configure route-profile for bridge-domain

Syntax:

WORD

Route profile name

Command Mode: interface : Configuration for interface bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# interface bridge-domain <WORD>
(config-tenant-interface)# route-profile <WORD>

route-reflector

route-reflector spine <LIST> [description <TEXT>]

Description: Configure BGP route-reflectors

Syntax:

spine

Configure Spines as route-reflectors

LIST

Route-reflector spine node name or ID list. Ex. spine1 or 103,105

TEXT

(Optional) Description

Command Mode: bgp : Border Gateway Protocol (BGP)

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# bgp fabric
(config-pod-bgp)# route-reflector spine <LIST> [description <TEXT>]

router-id

router-id <A.B.C.D|A:B::C:D>

Description: Set router-id for peer l4l7 device

Syntax:

A.B.C.D|A:B::C:D

IP address for the l4l7 peer

Command Mode: rtr-cfg : Configure l4l7 router configuration parameters

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# rtr-cfg <WORD>
(rtr-cfg)# router-id <A.B.C.D|A:B::C:D>

router-id <A.B.C.D>

Description: Configure Router ID

Syntax:

A.B.C.D

Router ID Value

Command Mode: vrf : Configure VRF parameters

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# router-id <A.B.C.D>

router bgp

router bgp <fabric-ASN>

Description: Border Gateway Protocol (BGP)

Syntax:

<fabric-ASN>

Autonomous System Number

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>

router eigrp

router eigrp default

Description: Enhanced Interior Gateway Routing Protocol (EIGRP)

Syntax:

default

EIGRP process tag

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router eigrp default

router ospf

router ospf default

Description: Open Shortest Path First (OSPF and OSPF Version3)

Syntax:

default

Process tag for ospf and ospfv3

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router ospf default

rtr-cfg

rtr-cfg <WORD>

Description: Configure router configuration association for a l4l7 service.

Syntax:

WORD

router configuration name (Max Size 64)

Command Mode: service : Configure L4-L7 Service

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 graph <WORD> [contract <contract-option>]
(config-graph)# service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode <Available Modes>]
(config-service)# rtr-cfg <WORD>

rtr-cfg <WORD>

Description: Configure l4l7 router configuration parameters

Syntax:

WORD

router configuration name (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# rtr-cfg <WORD>

run-mode

run-mode pause-never|pause-on-failure

Description: Set run-mode

Syntax:

pause-never

Do not pause on failure

pause-on-failure

Pause upgrade if upgrade of current set of nodes fail

Command Mode: switch-group : Create switch firmware upgrade policy

Command Path:

# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# switch-group <WORD>
(config-firmware-switch)# run-mode pause-never|pause-on-failure

Chapter 18. S Commands

- schedule

- scheduler

- scheduling

- scope

- scvmm

- second-file

- security-domain

- security

- send-community

- server

- service-policy

- service

- session-record-flags

- set

- set burst

- set cir

- set community

- set conform-cos-transmit

- set conform-dscp-transmit

- set conform

- set dampening

- set dscp

- set exceed-cos-transmit

- set exceed-dscp-transmit

- set exceed

- set excessive-burst

- set local-preference

- set metric-type

- set metric

- set mode

- set pir

- set qos-class

- set tag

- set target-dscp

- set type

- set violate-cos-transmit

- set violate-dscp-transmit

- set violate

- set weight

- shellinabox

- show aaa authentication

- show aaa groups

- show access-list

- show accounting log

- show application

- show audits

- show audits tenant

- show audits tenant application

- show audits tenant application epg

- show audits tenant bridge-domain

- show audits tenant bridge-domain detail

- show audits tenant interface bridge-domain

- show audits tenant interface bridge-domain detail

- show audits tenant vrf

- show audits tenant vrf detail

- show audits tenant vrf external-l3 bgp

- show audits tenant vrf external-l3 bgp node

- show audits tenant vrf external-l3 eigrp

- show audits tenant vrf external-l3 eigrp detail

- show audits tenant vrf external-l3 epg

- show audits tenant vrf external-l3 epg detail

- show audits tenant vrf external-l3 epg name

- show audits tenant vrf external-l3 epg name detail

- show audits tenant vrf external-l3 interfaces

- show audits tenant vrf external-l3 interfaces detail

- show audits tenant vrf external-l3 ospf

- show audits tenant vrf external-l3 ospf detail

- show audits tenant vrf external-l3 static-route

- show audits tenant vrf external-l3 static-route detail

- show audits tenant vrf external-l3 static-route node

- show audits tenant vrf external-l3 static-route node detail

- show bridge-domain

- show bridge-domain detail

- show callhome

- show callhome common destination-profile

- show callhome common query-profile

- show callhome common transport-email

- show catalog

- show cli command

- show cli internal audit

- show cli internal transaction

- show cli list

- show cli manpage

- show cli path

- show clock

- show communication ciphers

- show communication http

- show communication https

- show communication shellinabox

- show communication ssh-service

- show communication telnet

- show communication web-requests

- show contract-type

- show contract

- show controller

- show controller detail

- show cores

- show debug counter

- show debug log

- show dns-address

- show dns-domain

- show endpoints

- show endpoints leaf interface ethernet

- show endpoints leaf interface port-channel

- show endpoints vpc

- show epg

- show epg detail

- show events

- show events controller

- show events controller detail

- show events leaf

- show events leaf fex

- show events leaf fex module

- show events leaf interface ethernet

- show events leaf interface l3instance

- show events leaf interface mgmt

- show events leaf interface portchannel

- show events leaf interface tunnel

- show events leaf inventory chassis

- show events leaf inventory fans

- show events leaf inventory module

- show events leaf inventory module fabricport

- show events leaf inventory module leafport

- show events leaf inventory powersupply

- show events leaf inventory supervisor

- show events leaf protocol

- show events leaf vpc

- show events leaf vrf

- show events spine

- show events spine interface ethernet

- show events spine interface l3instance

- show events spine interface mgmt

- show events spine interface tunnel

- show events spine inventory chassis

- show events spine inventory fabric

- show events spine inventory fans

- show events spine inventory module

- show events spine inventory module fabricport

- show events spine inventory powersupply

- show events spine inventory supervisor

- show events spine inventory system

- show events spine protocol

- show events spine vrf

- show events tenant

- show events tenant application

- show events tenant application epg

- show events tenant bridge-domain

- show events tenant bridge-domain detail

- show events tenant endpoints

- show events tenant endpoints leaf interface ethernet

- show events tenant endpoints leaf interface port-channel

- show events tenant endpoints vpc

- show events tenant interface bridge-domain

- show events tenant interface bridge-domain detail

- show events tenant vrf

- show events tenant vrf detail

- show events tenant vrf external-l3 bgp

- show events tenant vrf external-l3 bgp node

- show events tenant vrf external-l3 eigrp

- show events tenant vrf external-l3 eigrp detail

- show events tenant vrf external-l3 epg

- show events tenant vrf external-l3 epg detail

- show events tenant vrf external-l3 epg name

- show events tenant vrf external-l3 epg name detail

- show events tenant vrf external-l3 interfaces

- show events tenant vrf external-l3 interfaces detail

- show events tenant vrf external-l3 ospf

- show events tenant vrf external-l3 ospf detail

- show events tenant vrf external-l3 route-map

- show events tenant vrf external-l3 route-map detail

- show events tenant vrf external-l3 static-route

- show events tenant vrf external-l3 static-route detail

- show events tenant vrf external-l3 static-route node

- show events tenant vrf external-l3 static-route node detail

- show external-l2 epg

- show external-l2 epg name

- show external-l2 epg tenant

- show external-l3 bgp

- show external-l3 bgp tenant

- show external-l3 bgp tenant vrf

- show external-l3 bgp tenant vrf node

- show external-l3 eigrp

- show external-l3 eigrp detail

- show external-l3 eigrp node

- show external-l3 eigrp node detail

- show external-l3 eigrp tenant

- show external-l3 eigrp tenant detail

- show external-l3 eigrp tenant vrf

- show external-l3 eigrp tenant vrf detail

- show external-l3 eigrp tenant vrf node

- show external-l3 eigrp tenant vrf node detail

- show external-l3 epg

- show external-l3 epg detail

- show external-l3 epg name

- show external-l3 epg name detail

- show external-l3 epg tenant

- show external-l3 epg tenant detail

- show external-l3 epg tenant vrf

- show external-l3 epg tenant vrf detail

- show external-l3 interfaces

- show external-l3 interfaces detail

- show external-l3 interfaces node

- show external-l3 interfaces node detail

- show external-l3 interfaces tenant

- show external-l3 interfaces tenant detail

- show external-l3 interfaces tenant vrf

- show external-l3 interfaces tenant vrf detail

- show external-l3 interfaces tenant vrf node

- show external-l3 interfaces tenant vrf node detail

- show external-l3 ospf

- show external-l3 ospf detail

- show external-l3 ospf node

- show external-l3 ospf node detail

- show external-l3 ospf tenant

- show external-l3 ospf tenant detail

- show external-l3 ospf tenant vrf

- show external-l3 ospf tenant vrf detail

- show external-l3 ospf tenant vrf node

- show external-l3 ospf tenant vrf node detail

- show external-l3 route-map

- show external-l3 route-map detail

- show external-l3 route-map name

- show external-l3 route-map name detail

- show external-l3 route-map tenant

- show external-l3 route-map tenant detail

- show external-l3 route-map tenant vrf

- show external-l3 route-map tenant vrf detail

- show external-l3 route-map tenant vrf node

- show external-l3 route-map tenant vrf node detail

- show external-l3 static-route

- show external-l3 static-route detail

- show external-l3 static-route node

- show external-l3 static-route node detail

- show external-l3 static-route tenant

- show external-l3 static-route tenant detail

- show external-l3 static-route tenant vrf

- show external-l3 static-route tenant vrf detail

- show external-l3 static-route tenant vrf node

- show external-l3 static-route tenant vrf node detail

- show fabric-recovery status

- show faults

- show faults controller

- show faults controller detail

- show faults l4l7-cluster

- show faults l4l7-graph

- show faults leaf

- show faults leaf fex

- show faults leaf fex module

- show faults leaf interface ethernet

- show faults leaf interface l3instance

- show faults leaf interface mgmt

- show faults leaf interface portchannel

- show faults leaf interface tunnel

- show faults leaf inventory chassis

- show faults leaf inventory fans

- show faults leaf inventory module

- show faults leaf inventory module fabricport

- show faults leaf inventory module leafport

- show faults leaf inventory powersupply

- show faults leaf inventory supervisor

- show faults leaf protocol

- show faults leaf vpc

- show faults leaf vrf

- show faults microsoft domain

- show faults microsoft domain name

- show faults microsoft domain name hyperv

- show faults microsoft domain name port-group

- show faults microsoft domain name scvmm

- show faults microsoft domain name vm

- show faults microsoft domain name vm name

- show faults spine

- show faults spine interface ethernet

- show faults spine interface l3instance

- show faults spine interface mgmt

- show faults spine interface tunnel

- show faults spine inventory chassis

- show faults spine inventory fabric

- show faults spine inventory fans

- show faults spine inventory module

- show faults spine inventory module fabricport

- show faults spine inventory powersupply

- show faults spine inventory supervisor

- show faults spine inventory system

- show faults spine protocol

- show faults spine vrf

- show faults tenant

- show faults tenant application

- show faults tenant application epg

- show faults tenant bridge-domain

- show faults tenant bridge-domain detail

- show faults tenant interface bridge-domain

- show faults tenant interface bridge-domain detail

- show faults tenant vrf

- show faults tenant vrf detail

- show faults tenant vrf external-l3 bgp

- show faults tenant vrf external-l3 bgp node

- show faults tenant vrf external-l3 eigrp

- show faults tenant vrf external-l3 eigrp detail

- show faults tenant vrf external-l3 epg

- show faults tenant vrf external-l3 epg detail

- show faults tenant vrf external-l3 epg name

- show faults tenant vrf external-l3 epg name detail

- show faults tenant vrf external-l3 interfaces

- show faults tenant vrf external-l3 interfaces detail

- show faults tenant vrf external-l3 ospf

- show faults tenant vrf external-l3 ospf detail

- show faults tenant vrf external-l3 static-route

- show faults tenant vrf external-l3 static-route detail

- show faults tenant vrf external-l3 static-route node

- show faults tenant vrf external-l3 static-route node detail

- show faults vmware domain

- show faults vmware domain name

- show faults vmware domain name epg

- show faults vmware domain name esx

- show faults vmware domain name port-group

- show faults vmware domain name vcenter

- show faults vmware domain name vm

- show faults vmware domain name vm name

- show firmware repository

- show firmware repository detail

- show firmware upgrade status

- show firmware upgrade status controller-group

- show firmware upgrade status controller-group detail

- show firmware upgrade status detail

- show firmware upgrade status switch-group

- show firmware upgrade status switch-group detail

- show health

- show health l4l7-cluster

- show health l4l7-graph

- show health leaf

- show health leaf fex

- show health leaf fex module

- show health leaf interface ethernet

- show health leaf interface l3instance

- show health leaf interface mgmt

- show health leaf interface portchannel

- show health leaf interface tunnel

- show health leaf inventory chassis

- show health leaf inventory fans

- show health leaf inventory module

- show health leaf inventory module fabricport

- show health leaf inventory module leafport

- show health leaf inventory powersupply

- show health leaf inventory supervisor

- show health leaf protocol

- show health leaf vpc

- show health leaf vrf

- show health spine

- show health spine interface ethernet

- show health spine interface l3instance

- show health spine interface mgmt

- show health spine interface tunnel

- show health spine inventory chassis

- show health spine inventory fabric

- show health spine inventory fans

- show health spine inventory module

- show health spine inventory module fabricport

- show health spine inventory powersupply

- show health spine inventory supervisor

- show health spine inventory system

- show health spine protocol

- show health spine vrf

- show health tenant

- show health tenant application

- show health tenant application epg

- show health tenant bridge-domain

- show health tenant bridge-domain detail

- show health tenant interface bridge-domain

- show health tenant interface bridge-domain detail

- show health tenant vrf

- show health tenant vrf detail

- show health tenant vrf external-l3 bgp

- show health tenant vrf external-l3 bgp node

- show health tenant vrf external-l3 eigrp

- show health tenant vrf external-l3 eigrp detail

- show health tenant vrf external-l3 epg

- show health tenant vrf external-l3 epg detail

- show health tenant vrf external-l3 epg name

- show health tenant vrf external-l3 epg name detail

- show health tenant vrf external-l3 interfaces

- show health tenant vrf external-l3 interfaces detail

- show health tenant vrf external-l3 ospf

- show health tenant vrf external-l3 ospf detail

- show health tenant vrf external-l3 static-route

- show health tenant vrf external-l3 static-route detail

- show health tenant vrf external-l3 static-route node

- show health tenant vrf external-l3 static-route node detail

- show inband-mgmt

- show inband-mgmt controller

- show inband-mgmt switch

- show interface bridge-domain

- show interface bridge-domain detail

- show ip interface bridge-domain

- show ipv6 interface bridge-domain

- show l4l7-cluster

- show l4l7-graph

- show l4l7-package

- show ldap-server

- show locator-led

- show locator-led status leaf

- show microsoft domain

- show microsoft domain name

- show microsoft domain name hyperv

- show microsoft domain name port-group

- show microsoft domain name scvmm

- show microsoft domain name vm

- show microsoft domain name vm name

- show microsoft vm

- show monitor access

- show monitor fabric

- show monitor tenant

- show monitor virtual

- show ntpq

- show oob-mgmt

- show oob-mgmt controller

- show oob-mgmt switch

- show policy-map

- show policy-map type data-plane

- show policy-map type qos

- show port-channel leaf

- show port-channel map

- show port-channel map leaf

- show radius-server

- show resource

- show resource conflict encap-vlan epg

- show resource conflict encap-vlan epg node

- show role

- show running-config

- show sessions

- show sessions controller

- show sessions controller detail

- show sessions leaf

- show sessions spine

- show snapshot active

- show snapshot files

- show snapshot jobs

- show snmp

- show snmp clientgroups

- show snmp community

- show snmp engineid

- show snmp hosts

- show snmp users

- show stats

- show stats granularity leaf

- show stats granularity leaf fex

- show stats granularity leaf fex module

- show stats granularity leaf interface ethernet

- show stats granularity leaf interface mgmt

- show stats granularity leaf interface portchannel

- show stats granularity leaf inventory fans

- show stats granularity leaf inventory powersupply

- show stats granularity leaf inventory supervisor

- show stats granularity spine

- show stats granularity spine interface ethernet

- show stats granularity spine interface mgmt

- show stats granularity spine inventory chassis

- show stats granularity spine inventory fabric

- show stats granularity spine inventory fans

- show stats granularity spine inventory module

- show stats granularity spine inventory powersupply

- show stats granularity spine inventory supervisor

- show stats granularity spine inventory system

- show stats granularity tenant

- show stats granularity tenant application

- show stats granularity tenant application epg

- show switch

- show switch detail

- show tacacs-server

- show techsupport all

- show techsupport controllers

- show techsupport host

- show techsupport switch

- show tenant

- show tenant access-list

- show tenant application

- show tenant application endpoints

- show tenant application endpoints leaf interface ethernet

- show tenant application endpoints leaf interface port-channel

- show tenant application endpoints vpc

- show tenant application epg

- show tenant application epg detail

- show tenant application epg endpoints

- show tenant application epg endpoints leaf interface ethernet

- show tenant application epg endpoints leaf interface port-channel

- show tenant application epg endpoints vpc

- show tenant bridge-domain

- show tenant bridge-domain detail

- show tenant contract-type

- show tenant contract

- show tenant detail

- show tenant endpoints

- show tenant endpoints leaf interface ethernet

- show tenant endpoints leaf interface port-channel

- show tenant endpoints vpc

- show tenant epg

- show tenant epg detail

- show tenant external-l2 epg

- show tenant interface bridge-domain

- show tenant interface bridge-domain detail

- show tenant ip interface bridge-domain

- show tenant ipv6 interface bridge-domain

- show tenant policy-map

- show tenant policy-map type data-plane

- show tenant policy-map type qos

- show tenant vrf

- show tenant vrf detail

- show tenant vrf external-l3 bgp

- show tenant vrf external-l3 bgp node

- show tenant vrf external-l3 eigrp

- show tenant vrf external-l3 eigrp detail

- show tenant vrf external-l3 epg

- show tenant vrf external-l3 epg detail

- show tenant vrf external-l3 epg name

- show tenant vrf external-l3 epg name detail

- show tenant vrf external-l3 interfaces

- show tenant vrf external-l3 interfaces detail

- show tenant vrf external-l3 ospf

- show tenant vrf external-l3 ospf detail

- show tenant vrf external-l3 route-map

- show tenant vrf external-l3 route-map detail

- show tenant vrf external-l3 static-route

- show tenant vrf external-l3 static-route detail

- show tenant vrf external-l3 static-route node

- show tenant vrf external-l3 static-route node detail

- show troubleshoot epext session

- show troubleshoot epext session atomiccounter

- show troubleshoot epext session audit

- show troubleshoot epext session contracts

- show troubleshoot epext session deployments

- show troubleshoot epext session events

- show troubleshoot epext session faults

- show troubleshoot epext session monitor

- show troubleshoot epext session reports

- show troubleshoot epext session statistics

- show troubleshoot epext session topology

- show troubleshoot epext session traceroute

- show troubleshoot epext sessions

- show troubleshoot eptoep session

- show troubleshoot eptoep session atomiccounter

- show troubleshoot eptoep session audit

- show troubleshoot eptoep session contracts

- show troubleshoot eptoep session deployments

- show troubleshoot eptoep session events

- show troubleshoot eptoep session faults

- show troubleshoot eptoep session monitor

- show troubleshoot eptoep session reports

- show troubleshoot eptoep session statistics

- show troubleshoot eptoep session topology

- show troubleshoot eptoep session traceroute

- show troubleshoot eptoep sessions

- show username

- show username detail

- show version

- show vlan-domain

- show vmware domain

- show vmware domain name

- show vmware domain name epg

- show vmware domain name esx

- show vmware domain name port-group

- show vmware domain name vcenter

- show vmware domain name vm

- show vmware domain name vm name

- show vmware vm

- show vpc

- show vpc map leaf

- show vrf

- show vrf detail

- shut

- shutdown

- site-id

- slow-timer

- snapshot download

- snapshot export

- snapshot import

- snapshot rollback

- snapshot upload

- snmp-server clientgroup

- snmp-server community

- snmp-server contact

- snmp-server host

- snmp-server location

- snmp-server protocol

- snmp-server user

- source

- source application

- source interface ethernet

- source interface port-channel

- source interface vpc

- spanning-tree

- spanning-tree bpdu-filter

- spanning-tree bpdu-guard

- speed

- spf-interval

- ssh-key

- ssh-service

- ssl-protocols

- ssl-validation-level

- state

- static-endpoint

- static-tep

- statistics

- storm-control level

- storm-control pps

- street-address

- subject

- summary-address

- switch-group

- switch

- switching

- switchport

- switchport access vlan tenant application

- switchport access vlan tenant external-svi

- switchport trunk allowed vlan inband-mgmt

- switchport trunk allowed vlan tenant application

- switchport trunk allowed vlan tenant external-l2

- switchport trunk allowed vlan tenant external-svi

- switchport trunk allowed vlan tenant legacy-forwarding

- switchport trunk native vlan tenant application

- switchport trunk native vlan tenant external-svi

- switchport vlan

- syslog

- system cluster-size

- system controller-id

- system dynamic-load-balance

- system fabric-security-mode

- system jumbomtu

- system switch-id

schedule

schedule <WORD>

Description: Assign a scheduler

Syntax:

WORD

scheduler name (Max Size 64)

Command Mode: switch-group : Create switch firmware upgrade policy

Command Path:

# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# switch-group <WORD>
(config-firmware-switch)# schedule <WORD>

schedule <WORD>

Description: Schedule snapshot export

Syntax:

WORD

Scheduler name

Command Mode: snapshot export : Configuration export setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot export <WORD>
(config-export)# schedule <WORD>

scheduler

scheduler pause

Description: Pause maintenance policy scheduler

Syntax:

pause

Pause maintenance policy scheduler

Command Mode: switch-group : Create switch firmware upgrade policy

Command Path:

# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# switch-group <WORD>
(config-firmware-switch)# scheduler pause

scheduler fabric|controller schedule <WORD>

Description: Scheduler configuration mode

Syntax:

fabric

Fabric schedules

controller

Controller schedules

schedule

Configure a schedule

WORD

Schedule name (Max size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# scheduler fabric|controller schedule <WORD>

scheduling

scheduling <WORD>

Description: Set the scheduling algorithm

Syntax:

WORD

Algorithm to choose

Command Mode: qos parameters : Configure the global QOS policies

Command Path:

# configure [['terminal', 't']]
(config)# qos parameters level1|level2|level3
(config-qos)# scheduling <WORD>

scope

scope <WORD>

Description: Specify the scope for the contract

Syntax:

WORD

Contract Scope

Command Mode: contract : Configure binary contracts between Application EPGs

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# scope <WORD>

scope global

Description: Set scope

Syntax:

global

Route-map will be available for use on all nodes in this tenant and vrf

Command Mode: route-map : Create route-map or enter route-map command mode

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# scope global

scvmm

scvmm <arg> cloud <WORD> [name <name>]

Description: Configure an SCVMM in the Microsoft domain

Syntax:

arg

cloud

Cloud name

WORD

Cloud Name (Max Size 512)

name

(Optional) SCVMM Controller Name

Command Mode: microsoft-domain : Create a VMM Microsoft Domain

Command Path:

# configure [['terminal', 't']]
(config)# microsoft-domain <WORD>
(config-microsoft)# scvmm <> cloud <WORD> [name <name>]

second-file

second-file <FILENAME>

Description: Second snapshot file name

Syntax:

FILENAME

Second snapshot file name

Command Mode: snapshot rollback : Configuration rollback setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot rollback <WORD>
(config-rollback)# second-file <FILENAME>

security-domain

security-domain <WORD>

Description: Add security domain

Syntax:

WORD

Security-domain name

Command Mode: vlan-domain : Configure vlan domain

Command Path:

# configure [['terminal', 't']]
(config)# vlan-domain <name> [dynamic] [type <domain-type>]
(config-vlan)# security-domain <WORD>

security-domain <WORD>

Description: Add a security domain to this VMware domain

Syntax:

WORD

Security domain name (Max Size 64)

Command Mode: vmware-domain : Create a VMM VMware Domain

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# security-domain <WORD>

security

security domain <WORD>

Description: Add a security domain to the tenant

Syntax:

domain

Domain

WORD

Security domain name (Max Size None)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# security domain <WORD>

send-community

send-community [extended]

Description: Send Community attribute to this neighbor

Syntax:

extended

(Optional) Send Extended Community attribute

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# send-community [extended]

server

server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

Description: Add LDAP server to LDAP group

Syntax:

A.B.C.D|A:B::C:D|WORD

LDAP server name or IP address

priority

priority of server within group

<0-16>

Priority of server within group. Number range from=0 to=16

Command Mode: aaa group server ldap : LDAP server group name.

Command Path:

# configure [['terminal', 't']]
(config)# aaa group server ldap <WORD>
(config-ldap)# server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

Description: Add RADIUS server to RADIUS group

Syntax:

A.B.C.D|A:B::C:D|WORD

RADIUS server name or IP address

priority

priority of server within group

<0-16>

Priority of server within group. Number range from=0 to=16

Command Mode: aaa group server radius : RADIUS server group name.

Command Path:

# configure [['terminal', 't']]
(config)# aaa group server radius <WORD>
(config-radius)# server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

Description: Add TACACS PLUS server to TACACS PLUS group

Syntax:

A.B.C.D|A:B::C:D|WORD

TACACS PLUS server name or IP address

priority

priority of server within group

<0-16>

Priority of server within group. Number range from=0 to=16

Command Mode: aaa group server tacacsplus : TACACS+ server group name.

Command Path:

# configure [['terminal', 't']]
(config)# aaa group server tacacsplus <WORD>
(config-tacacsplus)# server <A.B.C.D|A:B::C:D|WORD> priority <NUMBER>

server <WORD> [prefer] [key <arg>] [use-vrf <arg>]

Description: Configure ntp servers for the active ntp policy

Syntax:

WORD

Server name/IP for the active ntp policy (Max Size 64)

prefer

(Optional) Preferred server for the active ntp policy

arg

(Optional) Reference key id for authentication. Number range from=1 to=65535

arg

(Optional) Configure management vrf

Command Mode: ntp : Configure the default ntp policy

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# ntp
(config-ntp)# server <WORD> [prefer] [key <>] [use-vrf <>]

server <host/ipaddr> [facility <facility>] [severity <severity>] [mgmtepg <mgmtepg>] [port <port>]

Description: Add a destination server

Syntax:

<host/ipaddr>

The hostname or ipaddress

facility

(Optional) The forwarding facility level for logs generated

severity

(Optional) The severity level for logs generated

mgmtepg

(Optional) MgmtEndpoint

port

(Optional) Service port of the remote destination. Number range from=1 to=65535

Command Mode: logging : Logging server group configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# logging server-group <WORD>
(config-logging)# server <host/ipaddr> [facility <facility>] [severity <severity>] [mgmtepg <mgmtepg>] [port <port>]

service-policy

service-policy <WORD>

Description: Specify the QOS service policy

Syntax:

WORD

Qos Service Policy (Max Size 64)

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# service-policy <WORD>

service-policy <WORD>

Description: Specify the QOS service policy

Syntax:

WORD

Service policy to apply (Max Size 64)

Command Mode: external-l2 : L2 external EPG creation/configuration

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l2 epg <WORD>
(config-tenant-l2ext-epg)# service-policy <WORD>

service-policy type data-plane input|output <WORD>

Description: QOS service policy

Syntax:

type

Type of the Qos Policy

data-plane

QOS policy for Data Plane Policing

input

Ingress Direction

output

Egress Direction

WORD

Qos Policy Name (Max Size 64)

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# service-policy type data-plane input|output <WORD>

service-policy type data-plane input|output <WORD>

Description: QOS service policy

Syntax:

type

Type of the Qos Policy

data-plane

QOS policy for Data Plane Policing

input

Ingress Direction

output

Egress Direction

WORD

Qos Policy Name (Max Size 64)

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# service-policy type data-plane input|output <WORD>

service-policy type data-plane input|output <WORD>

Description: QOS service policy

Syntax:

type

Type of the Qos Policy

data-plane

QOS policy for Data Plane Policing

input

Ingress Direction

output

Egress Direction

WORD

Qos Policy Name (Max Size 64)

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# service-policy type data-plane input|output <WORD>

service-policy type data-plane input|output <WORD>

Description: QOS service policy

Syntax:

type

Type of the Qos Policy

data-plane

QOS policy for Data Plane Policing

input

Ingress Direction

output

Egress Direction

WORD

Qos Policy Name (Max Size 64)

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# service-policy type data-plane input|output <WORD>

service

service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode <Available Modes>]

Description: Configure L4-L7 Service

Syntax:

WORD

Service node name (Max Size 64)

WORD

(Optional) Tenant name (Max Size 63)

WORD

(Optional) Device cluster name (Max Size 64)

Available Modes

(Optional) Description

Command Mode: l4l7 graph : Configure L4-L7 Service Graph

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 graph <WORD> [contract <contract-option>]
(config-graph)# service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode <Available Modes>]

session-record-flags

session-record-flags <sessionRecordFlags>

Description: Enable/Disable refresh in the session records, Comma separated values

Syntax:

<sessionRecordFlags>

Session record flags as comma separated values like val1,val2,..valN

Command Mode: crypto webtoken : The cryptographic data used for generating and verifying web tokens.

Command Path:

# configure [['terminal', 't']]
(config)# crypto webtoken
(config-webtoken)# session-record-flags <sessionRecordFlags>

set

set qos-class <WORD>

Description: QOS level for the epg

Syntax:

qos-class

QOS level for the epg

WORD

Qos Level

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# set qos-class <WORD>

set qos-class <WORD>

Description: QOS level for the application

Syntax:

qos-class

QOS level for the application

WORD

Qos Level

Command Mode: application : application configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# set qos-class <WORD>

set qos-class <contractQosLevel>

Description: Specify the QOS level for the epg

Syntax:

qos-class

class of QOS to specify

<contractQosLevel>

{unspecified|level1|level2|level3}

Command Mode: inband-mgmt : Enter Inside In-band management mode to modify inband properties or create new inband

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# inband-mgmt epg <WORD>
(config-inb-epg)# set qos-class <contractQosLevel>

set qos-class <WORD>

Description: QOS level for the epg

Syntax:

qos-class

QOS level for the epg

WORD

Qos Level

Command Mode: external-l2 : L2 external EPG creation/configuration

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l2 epg <WORD>
(config-tenant-l2ext-epg)# set qos-class <WORD>

set qos-class <contractQosLevel>

Description: QOS level for the epg

Syntax:

qos-class

class of QOS to specify

<contractQosLevel>

{unspecified|level1|level2|level3}

Command Mode: oob-mgmt : Creates/Modify the out of band mgmt under the tenant mgmt

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# oob-mgmt epg <epgval>
(config-oob-epg)# set qos-class <contractQosLevel>

set burst

set burst <0-4294967295> UNIT

Description: Burst Rate

Syntax:

<0-4294967295>

Burst Rate

UNIT

Burst Rate Unit

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set burst <0-4294967295> UNIT

set burst <0-4294967295> UNIT

Description: Burst Rate

Syntax:

<0-4294967295>

Burst Rate

UNIT

Burst Rate Unit

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set burst <0-4294967295> UNIT

set cir

set cir <0-4294967295> UNIT

Description: Committed Rate

Syntax:

<0-4294967295>

Committed Rate

UNIT

Committed Rate Unit

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set cir <0-4294967295> UNIT

set cir <0-4294967295> UNIT

Description: Committed Rate

Syntax:

<0-4294967295>

Committed Rate

UNIT

Committed Rate Unit

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set cir <0-4294967295> UNIT

set community

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

regular

BGP regular community

extended

BGP extended community

value

Community value in aa:nn format

additive

Add to existing community

replace

Replace existing community

none

Do not change community

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# route-profile <WORD>
(config-tenant-vrf-route-profile)# set community regular|extended <value> additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

regular

BGP regular community

extended

BGP extended community

value

Community value in aa:nn format

additive

Add to existing community

replace

Replace existing community

none

Do not change community

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set community regular|extended <value> additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

regular

BGP regular community

extended

BGP extended community

value

Community value in aa:nn format

additive

Add to existing community

replace

Replace existing community

none

Do not change community

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD>
(config-leaf-vrf-route-map-match)# set community regular|extended <value> additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

regular

BGP regular community

extended

BGP extended community

value

Community value in aa:nn format

additive

Add to existing community

replace

Replace existing community

none

Do not change community

Command Mode: match community : Configure community features

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match community <WORD>
(config-leaf-vrf-route-map-match)# set community regular|extended <value> additive|replace|none

set community regular|extended <value> additive|replace|none

Description: Set BGP community attribute

Syntax:

regular

BGP regular community

extended

BGP extended community

value

Community value in aa:nn format

additive

Add to existing community

replace

Replace existing community

none

Do not change community

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD>
(config-leaf-vrf-template-route-profile)# set community regular|extended <value> additive|replace|none

set conform-cos-transmit

set conform-cos-transmit <0-6>

Description: Conform Policer Mark Cos

Syntax:

<0-6>

Conform Policer Mark Cos

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set conform-cos-transmit <0-6>

set conform-cos-transmit <0-6>

Description: Conform Policer Mark Cos

Syntax:

<0-6>

Conform Policer Mark Cos

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set conform-cos-transmit <0-6>

set conform-dscp-transmit

set conform-dscp-transmit <0-63>

Description: Conform Policer Mark DSCP

Syntax:

<0-63>

Conform Policer Mark DSCP

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set conform-dscp-transmit <0-63>

set conform-dscp-transmit <0-63>

Description: Conform Policer Mark DSCP

Syntax:

<0-63>

Conform Policer Mark DSCP

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set conform-dscp-transmit <0-63>

set conform

set conform <WORD>

Description: Conform Policer Action

Syntax:

WORD

Conform Policer Action

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set conform <WORD>

set conform <WORD>

Description: Conform Policer Action

Syntax:

WORD

Conform Policer Action

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set conform <WORD>

set dampening

set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

Description: Route Flap dampening

Syntax:

<1-60>

Decay half life. Number range from=1 to=60

<1-20000>

Value to start reusing a route. Number range from=1 to=20000

<1-20000>

Value to start suppressing a route. Number range from=1 to=20000

<1-255>

Maximum suppress time for stable route. Number range from=1 to=255

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set dampening <NUMBER> <NUMBER> <NUMBER> <NUMBER>

set dscp

set dscp <WORD>

Description: Specify the DSCP level for the EPG

Syntax:

WORD

DSCP value

Command Mode: external-l3 epg : External L3 EPG configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>]
(config-tenant-l3ext-epg)# set dscp <WORD>

set exceed-cos-transmit

set exceed-cos-transmit <0-6>

Description: Exceed Policer Mark Cos

Syntax:

<0-6>

Exceed Policer Mark Cos

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set exceed-cos-transmit <0-6>

set exceed-cos-transmit <0-6>

Description: Exceed Policer Mark Cos

Syntax:

<0-6>

Exceed Policer Mark Cos

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set exceed-cos-transmit <0-6>

set exceed-dscp-transmit

set exceed-dscp-transmit <0-63>

Description: Exceed Policer Mark DSCP

Syntax:

<0-63>

Exceed Policer Mark DSCP

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set exceed-dscp-transmit <0-63>

set exceed-dscp-transmit <0-63>

Description: Exceed Policer Mark DSCP

Syntax:

<0-63>

Exceed Policer Mark DSCP

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set exceed-dscp-transmit <0-63>

set exceed

set exceed <WORD>

Description: Exceed Policer Action

Syntax:

WORD

Exceed Policer Action

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set exceed <WORD>

set exceed <WORD>

Description: Exceed Policer Action

Syntax:

WORD

Exceed Policer Action

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set exceed <WORD>

set excessive-burst

set excessive-burst <0-4294967295> UNIT

Description: Excessive Burst Rate

Syntax:

<0-4294967295>

Excessive Burst Rate

UNIT

Excessive Burst Rate Unit

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set excessive-burst <0-4294967295> UNIT

set excessive-burst <0-4294967295> UNIT

Description: Excessive Burst Rate

Syntax:

<0-4294967295>

Excessive Burst Rate

UNIT

Excessive Burst Rate Unit

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set excessive-burst <0-4294967295> UNIT

set local-preference

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

<0-4294967295>

Preference value

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# route-profile <WORD>
(config-tenant-vrf-route-profile)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

<0-4294967295>

Preference value

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

<0-4294967295>

Preference value

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD>
(config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

<0-4294967295>

Preference value

Command Mode: match community : Configure community features

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match community <WORD>
(config-leaf-vrf-route-map-match)# set local-preference <0-4294967295>

set local-preference <0-4294967295>

Description: BGP local preference path attribute

Syntax:

<0-4294967295>

Preference value

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD>
(config-leaf-vrf-template-route-profile)# set local-preference <0-4294967295>

set metric-type

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type>

<metric-type>

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# route-profile <WORD>
(config-tenant-vrf-route-profile)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type>

<metric-type>

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type>

<metric-type>

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD>
(config-leaf-vrf-route-map-match)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type>

<metric-type>

Command Mode: match community : Configure community features

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match community <WORD>
(config-leaf-vrf-route-map-match)# set metric-type <metric-type>

set metric-type <metric-type>

Description: Type of metric for destination routing protocol

Syntax:

<metric-type>

<metric-type>

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD>
(config-leaf-vrf-template-route-profile)# set metric-type <metric-type>

set metric

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

<0-255>

Metric value. Number range from=0 to=255

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# route-profile <WORD>
(config-tenant-vrf-route-profile)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

<0-255>

Metric value. Number range from=0 to=255

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

<0-255>

Metric value. Number range from=0 to=255

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD>
(config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

<0-255>

Metric value. Number range from=0 to=255

Command Mode: match community : Configure community features

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match community <WORD>
(config-leaf-vrf-route-map-match)# set metric <NUMBER>

set metric <NUMBER>

Description: Set metric for destination routing protocol

Syntax:

<0-255>

Metric value. Number range from=0 to=255

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD>
(config-leaf-vrf-template-route-profile)# set metric <NUMBER>

set mode

set mode <WORD>

Description: Policer Mode

Syntax:

WORD

Policer Mode

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set mode <WORD>

set mode <WORD>

Description: Policer Mode

Syntax:

WORD

Policer Mode

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set mode <WORD>

set pir

set pir <0-4294967295> UNIT

Description: Peak Rate

Syntax:

<0-4294967295>

Peak Rate

UNIT

Pir Unit

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set pir <0-4294967295> UNIT

set pir <0-4294967295> UNIT

Description: Peak Rate

Syntax:

<0-4294967295>

Peak Rate

UNIT

Pir Unit

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set pir <0-4294967295> UNIT

set qos-class

set qos-class <WORD>

Description: Class of QOS to specify

Syntax:

WORD

Qos Level

Command Mode: contract : Configure binary contracts between Application EPGs

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# set qos-class <WORD>

set qos-class unspecified|level1|level2|level3

Description: Specify the QOS level for the EPG

Syntax:

unspecified

Unspecified QoS level

level1

QoS level1

level2

QoS level2

level3

QoS level3

Command Mode: external-l3 epg : External L3 EPG configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>]
(config-tenant-l3ext-epg)# set qos-class unspecified|level1|level2|level3

set tag

set tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

<0-4294967295>

Tag value. Number range from=0 to=4294967295

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# route-profile <WORD>
(config-tenant-vrf-route-profile)# set tag <NUMBER>

set tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

<0-4294967295>

Tag value. Number range from=0 to=4294967295

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set tag <NUMBER>

set tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

<0-4294967295>

Tag value. Number range from=0 to=4294967295

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD>
(config-leaf-vrf-route-map-match)# set tag <NUMBER>

set tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

<0-4294967295>

Tag value. Number range from=0 to=4294967295

Command Mode: match community : Configure community features

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match community <WORD>
(config-leaf-vrf-route-map-match)# set tag <NUMBER>

set tag <NUMBER>

Description: Tag value for destination routing protocol

Syntax:

<0-4294967295>

Tag value. Number range from=0 to=4294967295

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD>
(config-leaf-vrf-template-route-profile)# set tag <NUMBER>

set target-dscp

set target-dscp <WORD>

Description: class of target dscp to specify

Syntax:

WORD

Target dscp

Command Mode: contract : Configure binary contracts between Application EPGs

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# set target-dscp <WORD>

set target-dscp <WORD> WORD

Description: class of target dscp to specify

Syntax:

WORD

Target dscp

WORD

Target DSCP Direction

Command Mode: subject : Configuration a subject on the contract

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# subject <WORD>
(config-tenant-contract-subj)# set target-dscp <WORD> WORD

set type

set type <WORD>

Description: Policer type

Syntax:

WORD

Policer Type

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set type <WORD>

set type <WORD>

Description: Policer type

Syntax:

WORD

Policer Type

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set type <WORD>

set violate-cos-transmit

set violate-cos-transmit <0-6>

Description: Violate Policer Mark Cos

Syntax:

<0-6>

Violate Policer Mark Cos

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set violate-cos-transmit <0-6>

set violate-cos-transmit <0-6>

Description: Violate Policer Mark Cos

Syntax:

<0-6>

Violate Policer Mark Cos

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set violate-cos-transmit <0-6>

set violate-dscp-transmit

set violate-dscp-transmit <0-63>

Description: Violate Policer Mark DSCP

Syntax:

<0-63>

Violate Policer Mark DSCP

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set violate-dscp-transmit <0-63>

set violate-dscp-transmit <0-63>

Description: Violate Policer Mark DSCP

Syntax:

<0-63>

Violate Policer Mark DSCP

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set violate-dscp-transmit <0-63>

set violate

set violate <WORD>

Description: Violate Policer Action

Syntax:

WORD

Violate Policer Action

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# set violate <WORD>

set violate <WORD>

Description: Violate Policer Action

Syntax:

WORD

Violate Policer Action

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# set violate <WORD>

set weight

set weight <NUMBER>

Description: Weight value for destination routing protocol

Syntax:

<0-65535>

Weight value. Number range from=0 to=65535

Command Mode: route-profile : Configure route-profile

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>
(config-tenant-vrf)# route-profile <WORD>
(config-tenant-vrf-route-profile)# set weight <NUMBER>

set weight <NUMBER>

Description: Weight value for destination routing protocol

Syntax:

<0-65535>

Weight value. Number range from=0 to=65535

Command Mode: template route-profile : Configure route-profile template under tenant for BGP dampening and route redistribution

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route-profile <WORD> tenant <WORD>
(config-leaf-template-route-profile)# set weight <NUMBER>

set weight <NUMBER>

Description: Weight value for destination routing protocol

Syntax:

<0-65535>

Weight value. Number range from=0 to=65535

Command Mode: match prefix-list : Match entries of a prefix-list

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match prefix-list <WORD>
(config-leaf-vrf-route-map-match)# set weight <NUMBER>

set weight <NUMBER>

Description: Weight value for destination routing protocol

Syntax:

<0-65535>

Weight value. Number range from=0 to=65535

Command Mode: match community : Configure community features

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# route-map <WORD>
(config-leaf-vrf-route-map)# match community <WORD>
(config-leaf-vrf-route-map-match)# set weight <NUMBER>

set weight <NUMBER>

Description: Weight value for destination routing protocol

Syntax:

<0-65535>

Weight value. Number range from=0 to=65535

Command Mode: template route-profile : Configure route-profile template under VRF/L3Out for bridge-domain export

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD>
(config-leaf-vrf-template-route-profile)# set weight <NUMBER>

shellinabox

shellinabox

Description: Configures the communication policy of the SHELLINABOX feature

Command Mode: comm-policy : Configure any communication policy, ssh/telnet/shellinabox/http/https

Usage:

In the APIC GUI, the SHELLINABOX feature allows you to open a pop-up SSH session to a fabric switch by right-clicking the icon of the switch. To enable or disable this feature, use the shellinabox command to enter the SHELLINABOX communication policy group, then use the [no] admin-state-enable command.

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# shellinabox

show aaa authentication

show aaa authentication

Description: Show AAA Authentication information

Command Mode: exec : Exec Mode

Command Path:

# show aaa authentication

show aaa groups

show aaa groups

Description: Show AAA group information

Command Mode: exec : Exec Mode

Command Path:

# show aaa groups

show access-list

show access-list WORD

Description: Show Access-list Information

Syntax:

WORD

Name of the Contract to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show access-list WORD

show accounting log

show accounting log

Description: CLI configuration command logs

Command Mode: exec : Exec Mode

Command Path:

# show accounting log

NOTE:

This command displays only those changes made using the command line interface (CLI). It does not display changes made using the GUI or the API. To view all changes made in the Management Information Tree, use the show audit detail command.

show application

show application WORD

Description: Show Application Profiles Information

Syntax:

WORD

Name of the application we eventually want to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show application WORD

show audits

show audits [id <log-id>] [action action<action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

Description: Show audit-log information

Syntax:

<log-id>

(Optional) Log ID

action<action-type>

(Optional) Object action indicator

<user-name>

(Optional) Name of user

<num-minutes>

(Optional) Logs created in time interval. Number range from=1 to=59

<num-hours>

(Optional) Logs created in time interval. Number range from=1 to=23

<num-days>

(Optional) Logs created in time interval. Number range from=1 to=999

<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Logs created in time interval

end-time <YYYY-MM-DDTHR:MIN:SEC>

(Optional) Logs created in time interval

detail

(Optional) Detailed audit-log information. Displays what was modified and displays the old and new settings.

<scope>

command scope

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action action<action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

show audits tenant

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD

Description: Show Tenants Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD

show audits tenant application

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD

Description: Show Application Profiles Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD

show audits tenant application epg

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD

Description: Show Application EPG Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

WORD

Name of the AEPG to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD

show audits tenant bridge-domain

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD

show audits tenant bridge-domain detail

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail

show audits tenant interface bridge-domain

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD

show audits tenant interface bridge-domain detail

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail

show audits tenant vrf

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD

Description: Show VRF Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD

show audits tenant vrf detail

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail

Description: Show detailed view of VRF

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail

show audits tenant vrf external-l3 bgp

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp

Description: Show command for BGP peers

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp

show audits tenant vrf external-l3 bgp node

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>

Description: node to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<101-4000>

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>

show audits tenant vrf external-l3 eigrp

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp

Description: Show external l3 EIGRP

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp

show audits tenant vrf external-l3 eigrp detail

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail

show audits tenant vrf external-l3 epg

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>

Description: Show command for external-l3 epgs

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>

show audits tenant vrf external-l3 epg detail

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail

Description: external-l3 epg in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail

show audits tenant vrf external-l3 epg name

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

Description: EPG name to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

show audits tenant vrf external-l3 epg name detail

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail

Description: external-l3 epg in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail

show audits tenant vrf external-l3 interfaces

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces

Description: Show tenant <tenant> vrf <vrf> external l3 interfaces

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces

show audits tenant vrf external-l3 interfaces detail

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail

show audits tenant vrf external-l3 ospf

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf

Description: Show commad for IPv4 and IPv6 external l3 OSPF configuration

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf

show audits tenant vrf external-l3 ospf detail

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail

show audits tenant vrf external-l3 static-route

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route

Description: Show command for external-l3 static routes

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route

show audits tenant vrf external-l3 static-route detail

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail

Description: static-route in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail

show audits tenant vrf external-l3 static-route node

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node

Description: node to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node

show audits tenant vrf external-l3 static-route node detail

show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail

Description: static-route in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show audits [id <log-id>] [action <action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail

show bridge-domain

show bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show bridge-domain WORD

show bridge-domain detail

show bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show bridge-domain WORD detail

show callhome

show callhome common

Description: Show command for callhome

Syntax:

common

Common

Command Mode: exec : Exec Mode

Command Path:

# show callhome common

show callhome common destination-profile

show callhome common destination-profile

Description: Show command for callhome destination-profile

Syntax:

common

Common

Command Mode: exec : Exec Mode

Command Path:

# show callhome common destination-profile

show callhome common query-profile

show callhome common query-profile

Description: Show command for callhome destination-profile

Syntax:

common

Common

Command Mode: exec : Exec Mode

Command Path:

# show callhome common query-profile

show callhome common transport-email

show callhome common transport-email

Description: Show command for callhome transport-email

Syntax:

common

Common

Command Mode: exec : Exec Mode

Command Path:

# show callhome common transport-email

show catalog

show catalog

Description: Show catalog information

Command Mode: exec : Exec Mode

Command Path:

# show catalog

show cli command

show cli command <WORD> [mode <mode-name>]

Description: Show Commands Syntax

Syntax:

WORD

Command Name pattern between single quotes

<mode-name>

(Optional) Mode name pattern between single quotes

details

(Optional) Show Command Details

Command Mode: exec : Exec Mode

Command Path:

# show cli command <WORD> [mode <mode-name>]

show cli internal audit

show cli internal audit

Description: Show Commands Audit

Command Mode: exec : Exec Mode

Command Path:

# show cli internal audit

show cli internal transaction

show cli internal transaction logs|xml <NUMBER>

Description: Show Transaction Details

Syntax:

logs

Show Transaction Logs

xml

Show Transaction XML Post

<Transaction ID>

Transaction ID(TID) to grep log lines with similar TIDs. TID can be extracted from the 'show cli internal audit' command. Number range from=0 to=9223372036854775807

Command Mode: exec : Exec Mode

Command Path:

# show cli internal transaction logs|xml <NUMBER>

show cli list

show cli list [mode <mode-name>]

Description: Show all cli-related commands

Syntax:

<mode-name>

(Optional) Mode name pattern between single quotes

details

(Optional) Show Command Details

Command Mode: exec : Exec Mode

Command Path:

# show cli list [mode <mode-name>]

show cli manpage

show cli manpage <WORD> [mode <mode-name>]

Description: Show Commands ManPage

Syntax:

WORD

Command Name pattern between single quotes

<mode-name>

(Optional) Mode name pattern between single quotes

details

(Optional) Show Command Details

Command Mode: exec : Exec Mode

Command Path:

# show cli manpage <WORD> [mode <mode-name>]

show cli path

show cli path <WORD> [mode <mode-name>]

Description: Show Commands Path

Syntax:

WORD

Command Name pattern between single quotes

<mode-name>

(Optional) Mode name pattern between single quotes

details

(Optional) Show Command Details

Command Mode: exec : Exec Mode

Command Path:

# show cli path <WORD> [mode <mode-name>]

show clock

show clock

Description: Show clock information

Command Mode: exec : Exec Mode

Command Path:

# show clock

show communication ciphers

show communication ciphers

Description: HTTPS service cipher suite listings

Command Mode: exec : Exec Mode

Command Path:

# show communication ciphers

show communication http

show communication http

Description: HTTP service settings

Command Mode: exec : Exec Mode

Command Path:

# show communication http

show communication https

show communication https

Description: HTTPS service settings

Command Mode: exec : Exec Mode

Command Path:

# show communication https

show communication shellinabox

show communication shellinabox

Description: Shellinabox service settings

Command Mode: exec : Exec Mode

Command Path:

# show communication shellinabox

show communication ssh-service

show communication ssh-service

Description: SSH service settings

Command Mode: exec : Exec Mode

Command Path:

# show communication ssh-service

show communication telnet

show communication telnet

Description: Telnet service settings

Command Mode: exec : Exec Mode

Command Path:

# show communication telnet

show communication web-requests

show communication web-requests

Description: Status of last web requests

Command Mode: exec : Exec Mode

Command Path:

# show communication web-requests

show contract-type

show contract-type WORD

Description: Show Contracts Information Based on Type

Syntax:

WORD

whitelist (permit) or blacklist(deny) or oob-mgmt type of contract

Command Mode: exec : Exec Mode

Command Path:

# show contract-type WORD

show contract

show contract WORD

Description: Show Contracts Information

Syntax:

WORD

Name of the Contract to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show contract WORD

show controller

show controller

Description: Show controller information

Command Mode: exec : Exec Mode

Command Path:

# show controller

show controller detail

show controller detail [id <node-id>]

Description: Detailed controller information

Syntax:

node-id

(Optional) Optional Serial number

Command Mode: exec : Exec Mode

Command Path:

# show controller detail [id <node-id>]

show cores

show cores

Description: Show all core dumps

Command Mode: exec : Exec Mode

Command Path:

# show cores

show debug counter

show debug <node-name> <process> counter <counterTopics>

Description: Show Counter information

Syntax:

<node-name>

Node name

<process>

Process name

<counterTopics>

Counter Topics

Command Mode: exec : Exec Mode

Command Path:

# show debug <node-name> <process> counter <counterTopics>

show debug log

show debug <node-name> <process> log

Description: Show log level information

Syntax:

<node-name>

Node name

<process>

Process name

Command Mode: exec : Exec Mode

Command Path:

# show debug <node-name> <process> log

show dns-address

show dns-address

Description: Show dns address information

Command Mode: exec : Exec Mode

Command Path:

# show dns-address

show dns-domain

show dns-domain

Description: Show dns domain information

Command Mode: exec : Exec Mode

Command Path:

# show dns-domain

show endpoints

show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]

Description: Show IP endpoints

Syntax:

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

Command Mode: exec : Exec Mode

Command Path:

# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]

show endpoints leaf interface ethernet

show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>

Description: Show IP endpoints on an interface ethernet

Syntax:

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

WORD

Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807

ethernet [<fex>/]<slot>/<port>

Ethernet Range

Command Mode: exec : Exec Mode

Command Path:

# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>

show endpoints leaf interface port-channel

show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]

Description: Show IP endpoints on an interface port-channel

Syntax:

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

WORD

Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807

WORD

Port Channel Name (Max Size 64)

<101-164>

(Optional) Fex Id. Number range from=101 to=164

Command Mode: exec : Exec Mode

Command Path:

# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]

show endpoints vpc

show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]

Description: Show IP endpoints on vpc

Syntax:

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

context

VPC Context

WORD

First VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807

WORD

Second VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807

interface

VPC Interface name

vpc

VPC Interface name

WORD

VPC Name (Max Size 64)

fex

(Optional) Fex Id. Number range from=101 to=164

Command Mode: exec : Exec Mode

Command Path:

# show endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]

show epg

show epg WORD

Description: Show Application EPG Information

Syntax:

WORD

Name of the AEPG to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show epg WORD

show epg detail

show epg WORD detail

Description: Show detailed view of Application EPg

Syntax:

WORD

Name of the AEPG to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show epg WORD detail

show events

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

Description: Show event information

Syntax:

<event-code>

(Optional) Event code

<event-ID>

(Optional) Event ID

<event-value>

(Optional) Cause

last-minutes <num-minutes>

(Optional) Event activity in time interval. Number range from=1 to=59

last-hours <num-hours>

(Optional) Event activity in time interval. Number range from=1 to=23

last-days <num-days>

(Optional) Event activity in time interval. Number range from=1 to=999

start-time <YYYY-MM-DDTHR:MIN:SEC>

(Optional) Event activity in time interval

end-time <YYYY-MM-DDTHR:MIN:SEC>

(Optional) Event activity in time interval

detail

(Optional) Detailed event information

<scope>

command scope

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

show events controller

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller

Description: Show controller information

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller

show events controller detail

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]

Description: Detailed controller information

Syntax:

node-id

(Optional) Optional Serial number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]

show events leaf

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>

Description: Show command for leaf

Syntax:

<leafId>

Leaf id

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>

show events leaf fex

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum>

Description: Show extended chassis information

Syntax:

<leafId>

Leaf id

<fexNum>

pls enter fex number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum>

show events leaf fex module

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum> module <lcSlot>

Description: Show inventory module information

Syntax:

<leafId>

Leaf id

<fexNum>

pls enter fex number

<lcSlot>

please enter the module number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum> module <lcSlot>

show events leaf interface ethernet

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface ethernet <phyInt>

Description: Ethernet IEEE 802.3z

Syntax:

<leafId>

Leaf id

<phyInt>

<slot or chassis-number/port or slot number>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface ethernet <phyInt>

show events leaf interface l3instance

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface l3instance <l3Inst>

Description: L3 instance

Syntax:

<leafId>

Leaf id

<l3Inst>

<L3 instance number>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface l3instance <l3Inst>

show events leaf interface mgmt

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface mgmt <mgmtPort>

Description: Management interface

Syntax:

<leafId>

Leaf id

<mgmtPort>

<Management interface number>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface mgmt <mgmtPort>

show events leaf interface portchannel

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface portchannel <portChan>

Description: Port channel interface

Syntax:

<leafId>

Leaf id

<portChan>

<Port channel number>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface portchannel <portChan>

show events leaf interface tunnel

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface tunnel <tunnelPort>

Description: Tunnel Interface

Syntax:

<leafId>

Leaf id

<tunnelPort>

<Tunnel interface number>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface tunnel <tunnelPort>

show events leaf inventory chassis

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory chassis <ch>

Description: Show inventory chassis information

Syntax:

<leafId>

Leaf id

<ch>

None

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory chassis <ch>

show events leaf inventory fans

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory fans <ftSlot>

Description: Show inventory fan information

Syntax:

<leafId>

Leaf id

<ftSlot>

pls enter fan tray number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory fans <ftSlot>

show events leaf inventory module

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot>

Description: Show inventory module information

Syntax:

<leafId>

Leaf id

<lcSlot>

please enter the module number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot>

show events leaf inventory module fabricport

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>

Description: Show information for fabric port

Syntax:

<leafId>

Leaf id

<lcSlot>

please enter the module number

<fabPort>

pls enter the fabric port number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>

show events leaf inventory module leafport

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> leafport <leafPort>

Description: Show information for leaf port

Syntax:

<leafId>

Leaf id

<lcSlot>

please enter the module number

<leafPort>

pls enter the leaf port number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> leafport <leafPort>

show events leaf inventory powersupply

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory powersupply <psuSlot>

Description: Show inventory power supply information

Syntax:

<leafId>

Leaf id

<psuSlot>

pls enter the powersupply number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory powersupply <psuSlot>

show events leaf inventory supervisor

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory supervisor <supMod>

Description: Show information for supervisor module

Syntax:

<leafId>

Leaf id

<supMod>

pls enter the supervisor module number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory supervisor <supMod>

show events leaf protocol

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol <protName>

Description: Show command for protocol

Syntax:

<leafId>

Leaf id

<protName>

Protocol name

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol <protName>

show events leaf vpc

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc <vpcPort>

Description: Virtual port channel information

Syntax:

<leafId>

Leaf id

<vpcPort>

pls enter virtual port channel number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc <vpcPort>

show events leaf vrf

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf <vrfPort>

Description: Vrf information

Syntax:

<leafId>

Leaf id

<vrfPort>

pls enter vrf name

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf <vrfPort>

show events spine

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>

Description: Show command for spine

Syntax:

<leafId>

Leaf id

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>

show events spine interface ethernet

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface ethernet <phyInt>

Description: Ethernet IEEE 802.3z

Syntax:

<leafId>

Leaf id

<phyInt>

<slot or chassis-number/port or slot number>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface ethernet <phyInt>

show events spine interface l3instance

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface l3instance <l3Inst>

Description: L3 instance

Syntax:

<leafId>

Leaf id

<l3Inst>

<L3 instance number>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface l3instance <l3Inst>

show events spine interface mgmt

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface mgmt <mgmtPort>

Description: Management interface

Syntax:

<leafId>

Leaf id

<mgmtPort>

<Management interface number>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface mgmt <mgmtPort>

show events spine interface tunnel

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface tunnel <tunnelPort>

Description: Tunnel Interface

Syntax:

<leafId>

Leaf id

<tunnelPort>

<Tunnel interface number>

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface tunnel <tunnelPort>

show events spine inventory chassis

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory chassis

Description: Show inventory chassis information

Syntax:

<leafId>

Leaf id

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory chassis

show events spine inventory fabric

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fabric <fcMod>

Description: Show information for fabric module

Syntax:

<leafId>

Leaf id

<fcMod>

pls enter the fabric module number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fabric <fcMod>

show events spine inventory fans

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fans <ftSlot>

Description: Show inventory fan information

Syntax:

<leafId>

Leaf id

<ftSlot>

pls enter fan tray number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fans <ftSlot>

show events spine inventory module

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>

Description: Show inventory module information

Syntax:

<leafId>

Leaf id

<lcSlot>

please enter the module number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>

show events spine inventory module fabricport

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot> fabricport <fabPort>

Description: Show information for fabric port

Syntax:

<leafId>

Leaf id

<lcSlot>

please enter the module number

<fabPort>

pls enter the fabric port number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot> fabricport <fabPort>

show events spine inventory powersupply

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory powersupply <psuSlot>

Description: Show inventory power supply information

Syntax:

<leafId>

Leaf id

<psuSlot>

pls enter the powersupply number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory powersupply <psuSlot>

show events spine inventory supervisor

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory supervisor <supMod>

Description: Show information for supervisor module

Syntax:

<leafId>

Leaf id

<supMod>

pls enter the supervisor module number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory supervisor <supMod>

show events spine inventory system

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory system <sysMod>

Description: Show information for system module

Syntax:

<leafId>

Leaf id

<sysMod>

pls enter the system module number

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory system <sysMod>

show events spine protocol

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol <protName>

Description: Show command for protocol

Syntax:

<leafId>

Leaf id

<protName>

Protocol name

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol <protName>

show events spine vrf

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf <vrfPort>

Description: Vrf information

Syntax:

<leafId>

Leaf id

<vrfPort>

pls enter vrf name

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf <vrfPort>

show events tenant

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD

Description: Show Tenants Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD

show events tenant application

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD

Description: Show Application Profiles Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD

show events tenant application epg

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD

Description: Show Application EPG Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

WORD

Name of the AEPG to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD

show events tenant bridge-domain

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD

show events tenant bridge-domain detail

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail

show events tenant endpoints

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]

Description: Show IP endpoints

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]

show events tenant endpoints leaf interface ethernet

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>

Description: Show IP endpoints on an interface ethernet

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

WORD

Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807

ethernet [<fex>/]<slot>/<port>

Ethernet Range

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>

show events tenant endpoints leaf interface port-channel

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]

Description: Show IP endpoints on an interface port-channel

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

WORD

Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807

WORD

Port Channel Name (Max Size 64)

<101-164>

(Optional) Fex Id. Number range from=101 to=164

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]

show events tenant endpoints vpc

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]

Description: Show IP endpoints on vpc

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

context

VPC Context

WORD

First VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807

WORD

Second VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807

interface

VPC Interface name

vpc

VPC Interface name

WORD

VPC Name (Max Size 64)

fex

(Optional) Fex Id. Number range from=101 to=164

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]

show events tenant interface bridge-domain

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD

show events tenant interface bridge-domain detail

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail

show events tenant vrf

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD

Description: Show VRF Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD

show events tenant vrf detail

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail

Description: Show detailed view of VRF

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail

show events tenant vrf external-l3 bgp

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp

Description: Show command for BGP peers

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp

show events tenant vrf external-l3 bgp node

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>

Description: node to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<101-4000>

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>

show events tenant vrf external-l3 eigrp

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp

Description: Show external l3 EIGRP

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp

show events tenant vrf external-l3 eigrp detail

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail

show events tenant vrf external-l3 epg

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>

Description: Show command for external-l3 epgs

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>

show events tenant vrf external-l3 epg detail

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail

Description: external-l3 epg in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail

show events tenant vrf external-l3 epg name

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

Description: EPG name to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

show events tenant vrf external-l3 epg name detail

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail

Description: external-l3 epg in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail

show events tenant vrf external-l3 interfaces

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces

Description: Show tenant <tenant> vrf <vrf> external l3 interfaces

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces

show events tenant vrf external-l3 interfaces detail

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail

show events tenant vrf external-l3 ospf

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf

Description: Show commad for IPv4 and IPv6 external l3 OSPF configuration

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf

show events tenant vrf external-l3 ospf detail

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail

show events tenant vrf external-l3 route-map

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name <l3out name>]

Description: Show command for external-l3 route-map

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<l3out name>

(Optional) Name of the route-map to filter on

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name <l3out name>]

show events tenant vrf external-l3 route-map detail

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name <l3out name>] detail

Description: Show external-l3 route-map in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<l3out name>

(Optional) Name of the route-map to filter on

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 route-map [name <l3out name>] detail

show events tenant vrf external-l3 static-route

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route

Description: Show command for external-l3 static routes

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route

show events tenant vrf external-l3 static-route detail

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail

Description: static-route in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail

show events tenant vrf external-l3 static-route node

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node

Description: node to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node

show events tenant vrf external-l3 static-route node detail

show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail

Description: static-route in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show events [code <event-code>] [id <event-ID>] [cause <event-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail

show external-l2 epg

show external-l2 epg

Description: Show command for external-l2 epgs

Command Mode: exec : Exec Mode

Command Path:

# show external-l2 epg

show external-l2 epg name

show external-l2 epg name WORD

Description: EPG name to filter on

Syntax:

WORD

Name of the EPG to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show external-l2 epg name WORD

show external-l2 epg tenant

show external-l2 epg tenant WORD

Description: tenant to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show external-l2 epg tenant WORD

show external-l3 bgp

show external-l3 bgp

Description: Show command for BGP peers

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 bgp

show external-l3 bgp tenant

show external-l3 bgp tenant <WORD>

Description: tenant to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 bgp tenant <WORD>

show external-l3 bgp tenant vrf

show external-l3 bgp tenant <WORD> vrf WORD

Description: vrf to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 bgp tenant <WORD> vrf WORD

show external-l3 bgp tenant vrf node

show external-l3 bgp tenant <WORD> vrf WORD node <101-4000>

Description: node to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<101-4000>

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 bgp tenant <WORD> vrf WORD node <101-4000>

show external-l3 eigrp

show external-l3 eigrp

Description: Show command for external-l3 eigrp

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp

show external-l3 eigrp detail

show external-l3 eigrp detail

Description: Show interanl details

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp detail

show external-l3 eigrp node

show external-l3 eigrp node <101-4000>

Description: node(s) to filter on

Syntax:

<101-4000>

Node Range or Node Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp node <101-4000>

show external-l3 eigrp node detail

show external-l3 eigrp node <101-4000> detail

Description: Show interanl details

Syntax:

<101-4000>

Node Range or Node Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp node <101-4000> detail

show external-l3 eigrp tenant

show external-l3 eigrp tenant <WORD>

Description: tenant(s) to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp tenant <WORD>

show external-l3 eigrp tenant detail

show external-l3 eigrp tenant <WORD> detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp tenant <WORD> detail

show external-l3 eigrp tenant vrf

show external-l3 eigrp tenant <WORD> vrf WORD

Description: vrf(s) to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF(s) to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp tenant <WORD> vrf WORD

show external-l3 eigrp tenant vrf detail

show external-l3 eigrp tenant <WORD> vrf WORD detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF(s) to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp tenant <WORD> vrf WORD detail

show external-l3 eigrp tenant vrf node

show external-l3 eigrp tenant <WORD> vrf WORD node <101-4000>

Description: node(s) to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF(s) to filter on (Max Size 64)

<101-4000>

Node Range or Node Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp tenant <WORD> vrf WORD node <101-4000>

show external-l3 eigrp tenant vrf node detail

show external-l3 eigrp tenant <WORD> vrf WORD node <101-4000> detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF(s) to filter on (Max Size 64)

<101-4000>

Node Range or Node Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 eigrp tenant <WORD> vrf WORD node <101-4000> detail

show external-l3 epg

show external-l3 epg

Description: Show command for external-l3 epgs

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 epg

show external-l3 epg detail

show external-l3 epg detail

Description: external-l3 epg in detail with operational status

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 epg detail

show external-l3 epg name

show external-l3 epg name <epgName>

Description: EPG name to filter on

Syntax:

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 epg name <epgName>

show external-l3 epg name detail

show external-l3 epg name <epgName> detail

Description: external-l3 epg in detail with operational status

Syntax:

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 epg name <epgName> detail

show external-l3 epg tenant

show external-l3 epg tenant <WORD>

Description: tenant to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 epg tenant <WORD>

show external-l3 epg tenant detail

show external-l3 epg tenant <WORD> detail

Description: external-l3 epg in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 epg tenant <WORD> detail

show external-l3 epg tenant vrf

show external-l3 epg tenant <WORD> vrf WORD

Description: vrf to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 epg tenant <WORD> vrf WORD

show external-l3 epg tenant vrf detail

show external-l3 epg tenant <WORD> vrf WORD detail

Description: external-l3 epg in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 epg tenant <WORD> vrf WORD detail

show external-l3 interfaces

show external-l3 interfaces

Description: Show command for external-l3 interfaces

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces

show external-l3 interfaces detail

show external-l3 interfaces detail

Description: Show interanl details

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces detail

show external-l3 interfaces node

show external-l3 interfaces node <101-4000>

Description: node(s) to filter on

Syntax:

<101-4000>

Node Range or Node Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces node <101-4000>

show external-l3 interfaces node detail

show external-l3 interfaces node <101-4000> detail

Description: Show interanl details

Syntax:

<101-4000>

Node Range or Node Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces node <101-4000> detail

show external-l3 interfaces tenant

show external-l3 interfaces tenant <WORD>

Description: tenant(s) to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces tenant <WORD>

show external-l3 interfaces tenant detail

show external-l3 interfaces tenant <WORD> detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces tenant <WORD> detail

show external-l3 interfaces tenant vrf

show external-l3 interfaces tenant <WORD> vrf WORD

Description: vrf(s) to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF(s) to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces tenant <WORD> vrf WORD

show external-l3 interfaces tenant vrf detail

show external-l3 interfaces tenant <WORD> vrf WORD detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF(s) to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces tenant <WORD> vrf WORD detail

show external-l3 interfaces tenant vrf node

show external-l3 interfaces tenant <WORD> vrf WORD node <101-4000>

Description: node(s) to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF(s) to filter on (Max Size 64)

<101-4000>

Node Range or Node Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces tenant <WORD> vrf WORD node <101-4000>

show external-l3 interfaces tenant vrf node detail

show external-l3 interfaces tenant <WORD> vrf WORD node <101-4000> detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF(s) to filter on (Max Size 64)

<101-4000>

Node Range or Node Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 interfaces tenant <WORD> vrf WORD node <101-4000> detail

show external-l3 ospf

show external-l3 ospf

Description: Show command for external-l3 ospf

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf

show external-l3 ospf detail

show external-l3 ospf detail

Description: Show interanl details

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf detail

show external-l3 ospf node

show external-l3 ospf node <101-4000>

Description: node(s) to filter on

Syntax:

<101-4000>

Node Range or Node Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf node <101-4000>

show external-l3 ospf node detail

show external-l3 ospf node <101-4000> detail

Description: Show interanl details

Syntax:

<101-4000>

Node Range or Node Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf node <101-4000> detail

show external-l3 ospf tenant

show external-l3 ospf tenant <WORD>

Description: tenant(s) to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf tenant <WORD>

show external-l3 ospf tenant detail

show external-l3 ospf tenant <WORD> detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf tenant <WORD> detail

show external-l3 ospf tenant vrf

show external-l3 ospf tenant <WORD> vrf WORD

Description: vrf(s) to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF(s) to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf tenant <WORD> vrf WORD

show external-l3 ospf tenant vrf detail

show external-l3 ospf tenant <WORD> vrf WORD detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF(s) to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf tenant <WORD> vrf WORD detail

show external-l3 ospf tenant vrf node

show external-l3 ospf tenant <WORD> vrf WORD node <101-4000>

Description: node(s) to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF(s) to filter on (Max Size 64)

<101-4000>

Node Range or Node Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf tenant <WORD> vrf WORD node <101-4000>

show external-l3 ospf tenant vrf node detail

show external-l3 ospf tenant <WORD> vrf WORD node <101-4000> detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF(s) to filter on (Max Size 64)

<101-4000>

Node Range or Node Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 ospf tenant <WORD> vrf WORD node <101-4000> detail

show external-l3 route-map

show external-l3 route-map

Description: Show command for external-l3 route-map

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map

show external-l3 route-map detail

show external-l3 route-map detail

Description: Route-map in detail with operational status

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map detail

show external-l3 route-map name

show external-l3 route-map name <l3out name>

Description: Route-map name to filter on

Syntax:

<l3out name>

Name of the route-map to filter on

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map name <l3out name>

show external-l3 route-map name detail

show external-l3 route-map name <l3out name> detail

Description: Route-map in detail with operational status

Syntax:

<l3out name>

Name of the route-map to filter on

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map name <l3out name> detail

show external-l3 route-map tenant

show external-l3 route-map tenant <WORD>

Description: tenant to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map tenant <WORD>

show external-l3 route-map tenant detail

show external-l3 route-map tenant <WORD> detail

Description: Route-map in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map tenant <WORD> detail

show external-l3 route-map tenant vrf

show external-l3 route-map tenant <WORD> vrf WORD

Description: vrf to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map tenant <WORD> vrf WORD

show external-l3 route-map tenant vrf detail

show external-l3 route-map tenant <WORD> vrf WORD detail

Description: Route-map in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map tenant <WORD> vrf WORD detail

show external-l3 route-map tenant vrf node

show external-l3 route-map tenant <WORD> vrf WORD node

Description: node to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map tenant <WORD> vrf WORD node

show external-l3 route-map tenant vrf node detail

show external-l3 route-map tenant <WORD> vrf WORD node detail

Description: Route-map in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 route-map tenant <WORD> vrf WORD node detail

show external-l3 static-route

show external-l3 static-route

Description: Show command for external-l3 static routes

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route

show external-l3 static-route detail

show external-l3 static-route detail

Description: static-route in detail with operational status

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route detail

show external-l3 static-route node

show external-l3 static-route node

Description: node to filter on

Syntax:

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route node

show external-l3 static-route node detail

show external-l3 static-route node detail

Description: static-route in detail with operational status

Syntax:

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route node detail

show external-l3 static-route tenant

show external-l3 static-route tenant <WORD>

Description: tenant to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route tenant <WORD>

show external-l3 static-route tenant detail

show external-l3 static-route tenant <WORD> detail

Description: static-route in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route tenant <WORD> detail

show external-l3 static-route tenant vrf

show external-l3 static-route tenant <WORD> vrf WORD

Description: vrf to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route tenant <WORD> vrf WORD

show external-l3 static-route tenant vrf detail

show external-l3 static-route tenant <WORD> vrf WORD detail

Description: static-route in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route tenant <WORD> vrf WORD detail

show external-l3 static-route tenant vrf node

show external-l3 static-route tenant <WORD> vrf WORD node

Description: node to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route tenant <WORD> vrf WORD node

show external-l3 static-route tenant vrf node detail

show external-l3 static-route tenant <WORD> vrf WORD node detail

Description: static-route in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show external-l3 static-route tenant <WORD> vrf WORD node detail

show fabric-recovery status

show fabric-recovery status

Description: Show fabric recovery status

Command Mode: exec : Exec Mode

Command Path:

# show fabric-recovery status

show faults

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes/no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

Description: Show fault information

Syntax:

history

(Optional) Historical information

<fault-code>

(Optional) Fault code

<fault-ID>

(Optional) Fault ID

<yes/no>

(Optional) Acknowledgment status

<lc-state>

(Optional) Lifecycle state

<severity-value>

(Optional) Severity

<severity-value>

(Optional) Minimum severity

<fault-type>

(Optional) Type

<fault-value>

(Optional) Cause

last-minutes <num-minutes>

(Optional) Fault activity in time interval. Number range from=1 to=59

last-hours <num-hours>

(Optional) Fault activity in time interval. Number range from=1 to=23

last-days <num-days>

(Optional) Fault activity in time interval. Number range from=1 to=999

start-time <YYYY-MM-DDTHR:MIN:SEC>

(Optional) Fault activity in time interval

end-time <YYYY-MM-DDTHR:MIN:SEC>

(Optional) Fault activity in time interval

detail

(Optional) Detailed faults information

<scope>

command scope

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes/no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

show faults controller

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller

Description: Show controller information

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller

show faults controller detail

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]

Description: Detailed controller information

Syntax:

node-id

(Optional) Optional Serial number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]

show faults l4l7-cluster

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-cluster [tenant <Tenant Name>] [cluster <Device Cluster Name>]

Description: Show L4 L7 Device information

Syntax:

Tenant Name

(Optional) Name of Tenant

Device Cluster Name

(Optional) Name of Device

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-cluster [tenant <Tenant Name>] [cluster <Device Cluster Name>]

show faults l4l7-graph

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-graph [tenant <Tenant Name>] [graph <Graph Name>]

Description: Show L4 L7 Graph information

Syntax:

<Tenant Name>

(Optional) Name of Tenant

<Graph Name>

(Optional) Name of Graph

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] l4l7-graph [tenant <Tenant Name>] [graph <Graph Name>]

show faults leaf

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>

Description: Show command for leaf

Syntax:

<leafId>

Leaf id

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>

show faults leaf fex

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum>

Description: Show extended chassis information

Syntax:

<leafId>

Leaf id

<fexNum>

pls enter fex number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum>

show faults leaf fex module

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum> module <lcSlot>

Description: Show inventory module information

Syntax:

<leafId>

Leaf id

<fexNum>

pls enter fex number

<lcSlot>

please enter the module number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> fex <fexNum> module <lcSlot>

show faults leaf interface ethernet

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface ethernet <phyInt>

Description: Ethernet IEEE 802.3z

Syntax:

<leafId>

Leaf id

<phyInt>

<slot or chassis-number/port or slot number>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface ethernet <phyInt>

show faults leaf interface l3instance

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface l3instance <l3Inst>

Description: L3 instance

Syntax:

<leafId>

Leaf id

<l3Inst>

<L3 instance number>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface l3instance <l3Inst>

show faults leaf interface mgmt

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface mgmt <mgmtPort>

Description: Management interface

Syntax:

<leafId>

Leaf id

<mgmtPort>

<Management interface number>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface mgmt <mgmtPort>

show faults leaf interface portchannel

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface portchannel <portChan>

Description: Port channel interface

Syntax:

<leafId>

Leaf id

<portChan>

<Port channel number>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface portchannel <portChan>

show faults leaf interface tunnel

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface tunnel <tunnelPort>

Description: Tunnel Interface

Syntax:

<leafId>

Leaf id

<tunnelPort>

<Tunnel interface number>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> interface tunnel <tunnelPort>

show faults leaf inventory chassis

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory chassis <ch>

Description: Show inventory chassis information

Syntax:

<leafId>

Leaf id

<ch>

None

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory chassis <ch>

show faults leaf inventory fans

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory fans <ftSlot>

Description: Show inventory fan information

Syntax:

<leafId>

Leaf id

<ftSlot>

pls enter fan tray number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory fans <ftSlot>

show faults leaf inventory module

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot>

Description: Show inventory module information

Syntax:

<leafId>

Leaf id

<lcSlot>

please enter the module number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot>

show faults leaf inventory module fabricport

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>

Description: Show information for fabric port

Syntax:

<leafId>

Leaf id

<lcSlot>

please enter the module number

<fabPort>

pls enter the fabric port number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>

show faults leaf inventory module leafport

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> leafport <leafPort>

Description: Show information for leaf port

Syntax:

<leafId>

Leaf id

<lcSlot>

please enter the module number

<leafPort>

pls enter the leaf port number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory module <lcSlot> leafport <leafPort>

show faults leaf inventory powersupply

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory powersupply <psuSlot>

Description: Show inventory power supply information

Syntax:

<leafId>

Leaf id

<psuSlot>

pls enter the powersupply number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory powersupply <psuSlot>

show faults leaf inventory supervisor

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory supervisor <supMod>

Description: Show information for supervisor module

Syntax:

<leafId>

Leaf id

<supMod>

pls enter the supervisor module number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> inventory supervisor <supMod>

show faults leaf protocol

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol <protName>

Description: Show command for protocol

Syntax:

<leafId>

Leaf id

<protName>

Protocol name

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> protocol <protName>

show faults leaf vpc

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc <vpcPort>

Description: Virtual port channel information

Syntax:

<leafId>

Leaf id

<vpcPort>

pls enter virtual port channel number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vpc <vpcPort>

show faults leaf vrf

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf <vrfPort>

Description: Vrf information

Syntax:

<leafId>

Leaf id

<vrfPort>

pls enter vrf name

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId> vrf <vrfPort>

show faults microsoft domain

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain

Description: Show Microsoft domain information

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain

show faults microsoft domain name

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD>

Description: Microsoft domain name

Syntax:

WORD

Microsoft domain name

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD>

show faults microsoft domain name hyperv

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> hyperv <WORD>

Description: Show Microsoft Hypervisor information

Syntax:

WORD

Microsoft domain name

WORD

HyperV hostname

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> hyperv <WORD>

show faults microsoft domain name port-group

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> port-group

Description: Show Microsoft port group information

Syntax:

WORD

Microsoft domain name

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> port-group

show faults microsoft domain name scvmm

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> scvmm <hostname|ip>

Description: Show Microsoft SCVMM information

Syntax:

WORD

Microsoft domain name

<hostname|ip>

SCVMM hostname or IP

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> scvmm <hostname|ip>

show faults microsoft domain name vm

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> vm

Description: Show Microsoft VM information

Syntax:

WORD

Microsoft domain name

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> vm

show faults microsoft domain name vm name

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> vm name <WORD>

Description: Show detailed Microsoft VM information

Syntax:

WORD

Microsoft domain name

WORD

VM Name

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] microsoft domain name <WORD> vm name <WORD>

show faults spine

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>

Description: Show command for spine

Syntax:

<leafId>

Leaf id

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>

show faults spine interface ethernet

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface ethernet <phyInt>

Description: Ethernet IEEE 802.3z

Syntax:

<leafId>

Leaf id

<phyInt>

<slot or chassis-number/port or slot number>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface ethernet <phyInt>

show faults spine interface l3instance

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface l3instance <l3Inst>

Description: L3 instance

Syntax:

<leafId>

Leaf id

<l3Inst>

<L3 instance number>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface l3instance <l3Inst>

show faults spine interface mgmt

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface mgmt <mgmtPort>

Description: Management interface

Syntax:

<leafId>

Leaf id

<mgmtPort>

<Management interface number>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface mgmt <mgmtPort>

show faults spine interface tunnel

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface tunnel <tunnelPort>

Description: Tunnel Interface

Syntax:

<leafId>

Leaf id

<tunnelPort>

<Tunnel interface number>

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> interface tunnel <tunnelPort>

show faults spine inventory chassis

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory chassis

Description: Show inventory chassis information

Syntax:

<leafId>

Leaf id

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory chassis

show faults spine inventory fabric

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fabric <fcMod>

Description: Show information for fabric module

Syntax:

<leafId>

Leaf id

<fcMod>

pls enter the fabric module number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fabric <fcMod>

show faults spine inventory fans

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fans <ftSlot>

Description: Show inventory fan information

Syntax:

<leafId>

Leaf id

<ftSlot>

pls enter fan tray number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory fans <ftSlot>

show faults spine inventory module

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>

Description: Show inventory module information

Syntax:

<leafId>

Leaf id

<lcSlot>

please enter the module number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot>

show faults spine inventory module fabricport

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot> fabricport <fabPort>

Description: Show information for fabric port

Syntax:

<leafId>

Leaf id

<lcSlot>

please enter the module number

<fabPort>

pls enter the fabric port number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory module <lcSlot> fabricport <fabPort>

show faults spine inventory powersupply

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory powersupply <psuSlot>

Description: Show inventory power supply information

Syntax:

<leafId>

Leaf id

<psuSlot>

pls enter the powersupply number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory powersupply <psuSlot>

show faults spine inventory supervisor

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory supervisor <supMod>

Description: Show information for supervisor module

Syntax:

<leafId>

Leaf id

<supMod>

pls enter the supervisor module number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory supervisor <supMod>

show faults spine inventory system

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory system <sysMod>

Description: Show information for system module

Syntax:

<leafId>

Leaf id

<sysMod>

pls enter the system module number

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> inventory system <sysMod>

show faults spine protocol

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol <protName>

Description: Show command for protocol

Syntax:

<leafId>

Leaf id

<protName>

Protocol name

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> protocol <protName>

show faults spine vrf

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf <vrfPort>

Description: Vrf information

Syntax:

<leafId>

Leaf id

<vrfPort>

pls enter vrf name

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId> vrf <vrfPort>

show faults tenant

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD

Description: Show Tenants Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD

show faults tenant application

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD

Description: Show Application Profiles Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD

show faults tenant application epg

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD

Description: Show Application EPG Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

WORD

Name of the AEPG to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD application WORD epg WORD

show faults tenant bridge-domain

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD

show faults tenant bridge-domain detail

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD bridge-domain WORD detail

show faults tenant interface bridge-domain

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD

show faults tenant interface bridge-domain detail

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD interface bridge-domain WORD detail

show faults tenant vrf

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD

Description: Show VRF Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD

show faults tenant vrf detail

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail

Description: Show detailed view of VRF

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD detail

show faults tenant vrf external-l3 bgp

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp

Description: Show command for BGP peers

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp

show faults tenant vrf external-l3 bgp node

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>

Description: node to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<101-4000>

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 bgp node <101-4000>

show faults tenant vrf external-l3 eigrp

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp

Description: Show external l3 EIGRP

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp

show faults tenant vrf external-l3 eigrp detail

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 eigrp detail

show faults tenant vrf external-l3 epg

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>

Description: Show command for external-l3 epgs

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName>

show faults tenant vrf external-l3 epg detail

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail

Description: external-l3 epg in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> detail

show faults tenant vrf external-l3 epg name

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

Description: EPG name to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

show faults tenant vrf external-l3 epg name detail

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail

Description: external-l3 epg in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail

show faults tenant vrf external-l3 interfaces

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces

Description: Show tenant <tenant> vrf <vrf> external l3 interfaces

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces

show faults tenant vrf external-l3 interfaces detail

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 interfaces detail

show faults tenant vrf external-l3 ospf

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf

Description: Show commad for IPv4 and IPv6 external l3 OSPF configuration

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf

show faults tenant vrf external-l3 ospf detail

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 ospf detail

show faults tenant vrf external-l3 static-route

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route

Description: Show command for external-l3 static routes

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route

show faults tenant vrf external-l3 static-route detail

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail

Description: static-route in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route detail

show faults tenant vrf external-l3 static-route node

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node

Description: node to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node

show faults tenant vrf external-l3 static-route node detail

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail

Description: static-route in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] tenant WORD vrf WORD external-l3 static-route node detail

show faults vmware domain

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain

Description: Show VMware domain information

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain

show faults vmware domain name

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name>

Description: VMware domain name

Syntax:

<name>

VMware domain name

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name>

show faults vmware domain name epg

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> epg

Description: Show VMware domain EPG details

Syntax:

<name>

VMware domain name

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> epg

show faults vmware domain name esx

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> esx <esx-ip>

Description: Show VMware ESX information

Syntax:

<name>

VMware domain name

<esx-ip>

ESX IP

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> esx <esx-ip>

show faults vmware domain name port-group

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> port-group

Description: Show VMware port group information

Syntax:

<name>

VMware domain name

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> port-group

show faults vmware domain name vcenter

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vcenter <hostname|ip>

Description: VMware vCenter ip or hostname

Syntax:

<name>

VMware domain name

<hostname|ip>

vCenter hostname or IP

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vcenter <hostname|ip>

show faults vmware domain name vm

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vm

Description: Show VMware VM information

Syntax:

<name>

VMware domain name

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vm

show faults vmware domain name vm name

show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vm name <vm-name>

Description: Show detailed VMware VM information

Syntax:

<name>

VMware domain name

<vm-name>

VM Name

Command Mode: exec : Exec Mode

Command Path:

# show faults [history] [code <fault-code>] [id <fault-ID>] [ack <yes|no>] [lc <lc-state>] [severity <severity-value>] [min-severity <severity-value>] [type <fault-type>] [cause <fault-value>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] vmware domain name <name> vm name <vm-name>

show firmware repository

show firmware repository

Description: Show firmware images present in repository

Command Mode: exec : Exec Mode

Command Path:

# show firmware repository

show firmware repository detail

show firmware repository detail

Description: Detailed repository information

Command Mode: exec : Exec Mode

Command Path:

# show firmware repository detail

show firmware upgrade status

show firmware upgrade status

Description: Upgrade status of all controllers and switches

Command Mode: exec : Exec Mode

Command Path:

# show firmware upgrade status

show firmware upgrade status controller-group

show firmware upgrade status controller-group

Description: Controller-group upgrade status

Command Mode: exec : Exec Mode

Command Path:

# show firmware upgrade status controller-group

show firmware upgrade status controller-group detail

show firmware upgrade status controller-group detail

Description: Detailed upgrade status

Command Mode: exec : Exec Mode

Command Path:

# show firmware upgrade status controller-group detail

show firmware upgrade status detail

show firmware upgrade status detail

Description: Detailed upgrade status information

Command Mode: exec : Exec Mode

Command Path:

# show firmware upgrade status detail

show firmware upgrade status switch-group

show firmware upgrade status switch-group <WORD>

Description: Switch-group upgrade status

Syntax:

WORD

switch-group name (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show firmware upgrade status switch-group <WORD>

show firmware upgrade status switch-group detail

show firmware upgrade status switch-group <WORD> detail

Description: Detailed upgrade status

Syntax:

WORD

switch-group name (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show firmware upgrade status switch-group <WORD> detail

show health

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] <scope>

Description: Show health score information

Syntax:

history

(Optional) Historical information

min-change <percentage change>

(Optional) Minimum change in health score percentage. Number range from=-100 to=9999

max-hs <maximum health-score>

(Optional) Maximum health score. Number range from=0 to=100

start-time <YYYY-MM-DDTHR:MIN:SEC>

(Optional) Health activity in time interval

end-time <YYYY-MM-DDTHR:MIN:SEC>

(Optional) Health activity in time interval

<scope>

command scope

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] <scope>

show health l4l7-cluster

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] l4l7-cluster [tenant <Tenant Name>] [cluster <Device Cluster Name>]

Description: Show L4 L7 Device information

Syntax:

Tenant Name

(Optional) Name of Tenant

Device Cluster Name

(Optional) Name of Device

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] l4l7-cluster [tenant <Tenant Name>] [cluster <Device Cluster Name>]

show health l4l7-graph

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] l4l7-graph [tenant <Tenant Name>] [graph <Graph Name>]

Description: Show L4 L7 Graph information

Syntax:

<Tenant Name>

(Optional) Name of Tenant

<Graph Name>

(Optional) Name of Graph

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] l4l7-graph [tenant <Tenant Name>] [graph <Graph Name>]

show health leaf

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId>

Description: Show command for leaf

Syntax:

<leafId>

Leaf id

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId>

show health leaf fex

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum>

Description: Show extended chassis information

Syntax:

<leafId>

Leaf id

<fexNum>

pls enter fex number

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum>

show health leaf fex module

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum> module <lcSlot>

Description: Show inventory module information

Syntax:

<leafId>

Leaf id

<fexNum>

pls enter fex number

<lcSlot>

please enter the module number

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> fex <fexNum> module <lcSlot>

show health leaf interface ethernet

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface ethernet <phyInt>

Description: Ethernet IEEE 802.3z

Syntax:

<leafId>

Leaf id

<phyInt>

<slot or chassis-number/port or slot number>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface ethernet <phyInt>

show health leaf interface l3instance

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface l3instance <l3Inst>

Description: L3 instance

Syntax:

<leafId>

Leaf id

<l3Inst>

<L3 instance number>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface l3instance <l3Inst>

show health leaf interface mgmt

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface mgmt <mgmtPort>

Description: Management interface

Syntax:

<leafId>

Leaf id

<mgmtPort>

<Management interface number>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface mgmt <mgmtPort>

show health leaf interface portchannel

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface portchannel <portChan>

Description: Port channel interface

Syntax:

<leafId>

Leaf id

<portChan>

<Port channel number>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface portchannel <portChan>

show health leaf interface tunnel

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface tunnel <tunnelPort>

Description: Tunnel Interface

Syntax:

<leafId>

Leaf id

<tunnelPort>

<Tunnel interface number>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> interface tunnel <tunnelPort>

show health leaf inventory chassis

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory chassis <ch>

Description: Show inventory chassis information

Syntax:

<leafId>

Leaf id

<ch>

None

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory chassis <ch>

show health leaf inventory fans

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory fans <ftSlot>

Description: Show inventory fan information

Syntax:

<leafId>

Leaf id

<ftSlot>

pls enter fan tray number

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory fans <ftSlot>

show health leaf inventory module

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot>

Description: Show inventory module information

Syntax:

<leafId>

Leaf id

<lcSlot>

please enter the module number

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot>

show health leaf inventory module fabricport

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>

Description: Show information for fabric port

Syntax:

<leafId>

Leaf id

<lcSlot>

please enter the module number

<fabPort>

pls enter the fabric port number

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot> fabricport <fabPort>

show health leaf inventory module leafport

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot> leafport <leafPort>

Description: Show information for leaf port

Syntax:

<leafId>

Leaf id

<lcSlot>

please enter the module number

<leafPort>

pls enter the leaf port number

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory module <lcSlot> leafport <leafPort>

show health leaf inventory powersupply

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory powersupply <psuSlot>

Description: Show inventory power supply information

Syntax:

<leafId>

Leaf id

<psuSlot>

pls enter the powersupply number

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory powersupply <psuSlot>

show health leaf inventory supervisor

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory supervisor <supMod>

Description: Show information for supervisor module

Syntax:

<leafId>

Leaf id

<supMod>

pls enter the supervisor module number

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> inventory supervisor <supMod>

show health leaf protocol

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> protocol <protName>

Description: Show command for protocol

Syntax:

<leafId>

Leaf id

<protName>

Protocol name

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> protocol <protName>

show health leaf vpc

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> vpc <vpcPort>

Description: Virtual port channel information

Syntax:

<leafId>

Leaf id

<vpcPort>

pls enter virtual port channel number

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> vpc <vpcPort>

show health leaf vrf

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> vrf <vrfPort>

Description: Vrf information

Syntax:

<leafId>

Leaf id

<vrfPort>

pls enter vrf name

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] leaf <leafId> vrf <vrfPort>

show health spine

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId>

Description: Show command for spine

Syntax:

<leafId>

Leaf id

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId>

show health spine interface ethernet

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface ethernet <phyInt>

Description: Ethernet IEEE 802.3z

Syntax:

<leafId>

Leaf id

<phyInt>

<slot or chassis-number/port or slot number>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface ethernet <phyInt>

show health spine interface l3instance

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface l3instance <l3Inst>

Description: L3 instance

Syntax:

<leafId>

Leaf id

<l3Inst>

<L3 instance number>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface l3instance <l3Inst>

show health spine interface mgmt

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface mgmt <mgmtPort>

Description: Management interface

Syntax:

<leafId>

Leaf id

<mgmtPort>

<Management interface number>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface mgmt <mgmtPort>

show health spine interface tunnel

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface tunnel <tunnelPort>

Description: Tunnel Interface

Syntax:

<leafId>

Leaf id

<tunnelPort>

<Tunnel interface number>

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> interface tunnel <tunnelPort>

show health spine inventory chassis

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory chassis

Description: Show inventory chassis information

Syntax:

<leafId>

Leaf id

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory chassis

show health spine inventory fabric

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory fabric <fcMod>

Description: Show information for fabric module

Syntax:

<leafId>

Leaf id

<fcMod>

pls enter the fabric module number

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory fabric <fcMod>

show health spine inventory fans

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory fans <ftSlot>

Description: Show inventory fan information

Syntax:

<leafId>

Leaf id

<ftSlot>

pls enter fan tray number

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory fans <ftSlot>

show health spine inventory module

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory module <lcSlot>

Description: Show inventory module information

Syntax:

<leafId>

Leaf id

<lcSlot>

please enter the module number

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory module <lcSlot>

show health spine inventory module fabricport

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory module <lcSlot> fabricport <fabPort>

Description: Show information for fabric port

Syntax:

<leafId>

Leaf id

<lcSlot>

please enter the module number

<fabPort>

pls enter the fabric port number

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory module <lcSlot> fabricport <fabPort>

show health spine inventory powersupply

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory powersupply <psuSlot>

Description: Show inventory power supply information

Syntax:

<leafId>

Leaf id

<psuSlot>

pls enter the powersupply number

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory powersupply <psuSlot>

show health spine inventory supervisor

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory supervisor <supMod>

Description: Show information for supervisor module

Syntax:

<leafId>

Leaf id

<supMod>

pls enter the supervisor module number

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory supervisor <supMod>

show health spine inventory system

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory system <sysMod>

Description: Show information for system module

Syntax:

<leafId>

Leaf id

<sysMod>

pls enter the system module number

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> inventory system <sysMod>

show health spine protocol

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> protocol <protName>

Description: Show command for protocol

Syntax:

<leafId>

Leaf id

<protName>

Protocol name

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> protocol <protName>

show health spine vrf

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> vrf <vrfPort>

Description: Vrf information

Syntax:

<leafId>

Leaf id

<vrfPort>

pls enter vrf name

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] spine <leafId> vrf <vrfPort>

show health tenant

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD

Description: Show Tenants Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD

show health tenant application

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD application WORD

Description: Show Application Profiles Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD application WORD

show health tenant application epg

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD application WORD epg WORD

Description: Show Application EPG Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

WORD

Name of the AEPG to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD application WORD epg WORD

show health tenant bridge-domain

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD

show health tenant bridge-domain detail

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD bridge-domain WORD detail

show health tenant interface bridge-domain

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interface bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interface bridge-domain WORD

show health tenant interface bridge-domain detail

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interface bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD interface bridge-domain WORD detail

show health tenant vrf

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD

Description: Show VRF Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD

show health tenant vrf detail

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD detail

Description: Show detailed view of VRF

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD detail

show health tenant vrf external-l3 bgp

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 bgp

Description: Show command for BGP peers

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 bgp

show health tenant vrf external-l3 bgp node

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 bgp node <101-4000>

Description: node to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<101-4000>

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 bgp node <101-4000>

show health tenant vrf external-l3 eigrp

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 eigrp

Description: Show external l3 EIGRP

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 eigrp

show health tenant vrf external-l3 eigrp detail

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 eigrp detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 eigrp detail

show health tenant vrf external-l3 epg

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName>

Description: Show command for external-l3 epgs

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName>

show health tenant vrf external-l3 epg detail

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName> detail

Description: external-l3 epg in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName> detail

show health tenant vrf external-l3 epg name

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

Description: EPG name to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

show health tenant vrf external-l3 epg name detail

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail

Description: external-l3 epg in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail

show health tenant vrf external-l3 interfaces

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 interfaces

Description: Show tenant <tenant> vrf <vrf> external l3 interfaces

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 interfaces

show health tenant vrf external-l3 interfaces detail

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 interfaces detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 interfaces detail

show health tenant vrf external-l3 ospf

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 ospf

Description: Show commad for IPv4 and IPv6 external l3 OSPF configuration

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 ospf

show health tenant vrf external-l3 ospf detail

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 ospf detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 ospf detail

show health tenant vrf external-l3 static-route

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route

Description: Show command for external-l3 static routes

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route

show health tenant vrf external-l3 static-route detail

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route detail

Description: static-route in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route detail

show health tenant vrf external-l3 static-route node

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route node

Description: node to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route node

show health tenant vrf external-l3 static-route node detail

show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route node detail

Description: static-route in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show health [history] [min-change <NUMBER>] [max-hs <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] tenant WORD vrf WORD external-l3 static-route node detail

show inband-mgmt

show inband-mgmt

Description: show inband mgmt epgs on all the nodes

Command Mode: exec : Exec Mode

Command Path:

# show inband-mgmt

show inband-mgmt controller

show inband-mgmt controller <controller-id> [epg <WORD>]

Description: show inband mgmt epgs on the controller

Syntax:

<controller-id>

WORD

(Optional) Epg Name of conusmer epg

Command Mode: exec : Exec Mode

Command Path:

# show inband-mgmt controller <controller-id> [epg <WORD>]

show inband-mgmt switch

show inband-mgmt switch <switch-id> [epg <WORD>]

Description: show inband mgmt epgs on the node

Syntax:

<switch-id>

WORD

(Optional) Epg Name

Command Mode: exec : Exec Mode

Command Path:

# show inband-mgmt switch <switch-id> [epg <WORD>]

show interface bridge-domain

show interface bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show interface bridge-domain WORD

show interface bridge-domain detail

show interface bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show interface bridge-domain WORD detail

show ip interface bridge-domain

show ip interface bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show ip interface bridge-domain WORD

show ipv6 interface bridge-domain

show ipv6 interface bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show ipv6 interface bridge-domain WORD

show l4l7-cluster

show l4l7-cluster [tenant <Tenant Name>] [cluster <Device Cluster Name>]

Description: Show L4 L7 Device information

Syntax:

Tenant Name

(Optional) Name of Tenant

Device Cluster Name

(Optional) Name of Device

Command Mode: exec : Exec Mode

Command Path:

# show l4l7-cluster [tenant <Tenant Name>] [cluster <Device Cluster Name>]

show l4l7-graph

show l4l7-graph [tenant <Tenant Name>] [graph <Graph Name>]

Description: Show L4 L7 Graph information

Syntax:

<Tenant Name>

(Optional) Name of Tenant

<Graph Name>

(Optional) Name of Graph

Command Mode: exec : Exec Mode

Command Path:

# show l4l7-graph [tenant <Tenant Name>] [graph <Graph Name>]

show l4l7-package

show l4l7-package

Description: Show L4-L7 package information

Command Mode: exec : Exec Mode

Command Path:

# show l4l7-package

show ldap-server

show ldap-server

Description: Show LDAP server information

Command Mode: exec : Exec Mode

Command Path:

# show ldap-server

show locator-led

show locator-led status

Description: Show command for locator-led

Syntax:

status

locator-led status

Command Mode: exec : Exec Mode

Command Path:

# show locator-led status

show locator-led status leaf

show locator-led status leaf

Description: Leaf to filter on

Syntax:

status

locator-led status

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show locator-led status leaf

show microsoft domain

show microsoft domain

Description: Show Microsoft domain information

Command Mode: exec : Exec Mode

Command Path:

# show microsoft domain

show microsoft domain name

show microsoft domain name <WORD>

Description: Microsoft domain name

Syntax:

WORD

Microsoft domain name

Command Mode: exec : Exec Mode

Command Path:

# show microsoft domain name <WORD>

show microsoft domain name hyperv

show microsoft domain name <WORD> hyperv <WORD>

Description: Show Microsoft Hypervisor information

Syntax:

WORD

Microsoft domain name

WORD

HyperV hostname

Command Mode: exec : Exec Mode

Command Path:

# show microsoft domain name <WORD> hyperv <WORD>

show microsoft domain name port-group

show microsoft domain name <WORD> port-group

Description: Show Microsoft port group information

Syntax:

WORD

Microsoft domain name

Command Mode: exec : Exec Mode

Command Path:

# show microsoft domain name <WORD> port-group

show microsoft domain name scvmm

show microsoft domain name <WORD> scvmm <hostname|ip>

Description: Show Microsoft SCVMM information

Syntax:

WORD

Microsoft domain name

<hostname|ip>

SCVMM hostname or IP

Command Mode: exec : Exec Mode

Command Path:

# show microsoft domain name <WORD> scvmm <hostname|ip>

show microsoft domain name vm

show microsoft domain name <WORD> vm

Description: Show Microsoft VM information

Syntax:

WORD

Microsoft domain name

Command Mode: exec : Exec Mode

Command Path:

# show microsoft domain name <WORD> vm

show microsoft domain name vm name

show microsoft domain name <WORD> vm name <WORD>

Description: Show detailed Microsoft VM information

Syntax:

WORD

Microsoft domain name

WORD

VM Name

Command Mode: exec : Exec Mode

Command Path:

# show microsoft domain name <WORD> vm name <WORD>

show microsoft vm

show microsoft vm [name <WORD>] [ip <A.B.C.D>] [mac <AA:BB:CC:DD:EE:FF>]

Description: Show Microsoft VM information

Syntax:

WORD

(Optional) Specify a VM name

A.B.C.D

(Optional) Specify a VM IP address

AA:BB:CC:DD:EE:FF

(Optional) Specify a VM MAC address

Command Mode: exec : Exec Mode

Command Path:

# show microsoft vm [name <WORD>] [ip <A.B.C.D>] [mac <AA:BB:CC:DD:EE:FF>]

show monitor access

show monitor access session session_name

Description: Show monitor session for access interfaces

Syntax:

session

session

session_name

session name

Command Mode: exec : Exec Mode

Command Path:

# show monitor access session session_name

show monitor fabric

show monitor fabric session session_name

Description: Show monitor session for fabric interfaces

Syntax:

session

session

session_name

session name

Command Mode: exec : Exec Mode

Command Path:

# show monitor fabric session session_name

show monitor tenant

show monitor tenant <tenant_name> session session_name

Description: Show monitor session for tenant

Syntax:

tenant_name

tenant

session

session

session_name

session name

Command Mode: exec : Exec Mode

Command Path:

# show monitor tenant <tenant_name> session session_name

show monitor virtual

show monitor virtual session WORD

Description: Show monitor session for virtual switches

Syntax:

session

session

WORD

Session name

Command Mode: exec : Exec Mode

Command Path:

# show monitor virtual session WORD

show ntpq

show ntpq

Description: Show ntpq information

Command Mode: exec : Exec Mode

Command Path:

# show ntpq

show oob-mgmt

show oob-mgmt

Description: Show Out of band Information

Command Mode: exec : Exec Mode

Command Path:

# show oob-mgmt

show oob-mgmt controller

show oob-mgmt controller <controller-id> [epg <WORD>]

Description: show oob mgmt epgs on the controller, enter one

Syntax:

<controller-id>

WORD

(Optional) Epg Name of conusmer epg

Command Mode: exec : Exec Mode

Command Path:

# show oob-mgmt controller <controller-id> [epg <WORD>]

show oob-mgmt switch

show oob-mgmt switch <switch-id> [epg <WORD>]

Description: show oob mgmt epgs on the node, enter one

Syntax:

<switch-id>

WORD

(Optional) Epg Name of conusmer epg

Command Mode: exec : Exec Mode

Command Path:

# show oob-mgmt switch <switch-id> [epg <WORD>]

show policy-map

show policy-map

Description: Show policy maps

Command Mode: exec : Exec Mode

Command Path:

# show policy-map

show policy-map type data-plane

show policy-map type data-plane infra WORD

Description: data-plane type policy-map(s)

Syntax:

infra

Global data-plane policy-map(s)

WORD

data-plane type policy-map(s) (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show policy-map type data-plane infra WORD

show policy-map type qos

show policy-map type qos WORD

Description: QOS type policy-map(s)

Syntax:

WORD

QOS type policy-map(s) (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show policy-map type qos WORD

show port-channel leaf

show port-channel leaf WORD <port-channel-list>

Description: show leaf port-channel info

Syntax:

WORD

Leaf Range or Leaf Name List

<port-channel-list>

port channel names

Command Mode: exec : Exec Mode

Command Path:

# show port-channel leaf WORD <port-channel-list>

show port-channel map

show port-channel map <port-channel-list>

Description: show port-channel mapping

Syntax:

<port-channel-list>

port channel names

Command Mode: exec : Exec Mode

Command Path:

# show port-channel map <port-channel-list>

show port-channel map leaf

show port-channel map <port-channel-list> leaf WORD [fex <101-164>]

Description: leaf

Syntax:

<port-channel-list>

port channel names

WORD

Leaf Range or Leaf Name List

<101-164>

(Optional) Fex ID

Command Mode: exec : Exec Mode

Command Path:

# show port-channel map <port-channel-list> leaf WORD [fex <101-164>]

show radius-server

show radius-server

Description: Show RADIUS server information

Command Mode: exec : Exec Mode

Command Path:

# show radius-server

show resource

show resource conflict encap-vlan

Description: resource

Syntax:

conflict

show resource conflicts in APIC

encap-vlan

show resource conflicts of encap-vlan in APIC

Command Mode: exec : Exec Mode

Command Path:

# show resource conflict encap-vlan

show resource conflict encap-vlan epg

show resource conflict encap-vlan epg <WORD>

Description: Epg Name

Syntax:

conflict

show resource conflicts in APIC

encap-vlan

show resource conflicts of encap-vlan in APIC

WORD

Epg Name

Command Mode: exec : Exec Mode

Command Path:

# show resource conflict encap-vlan epg <WORD>

show resource conflict encap-vlan epg node

show resource conflict encap-vlan epg <WORD> node <101-4000>

Description: Node ID

Syntax:

conflict

show resource conflicts in APIC

encap-vlan

show resource conflicts of encap-vlan in APIC

WORD

Epg Name

<101-4000>

Leaf ID

Command Mode: exec : Exec Mode

Command Path:

# show resource conflict encap-vlan epg <WORD> node <101-4000>

show role

show role

Description: Show information about AAA Roles

Command Mode: exec : Exec Mode

Command Path:

# show role

show running-config

show running-config [all] <scope>

Description: show running configuration

Syntax:

all

(Optional) show running-config with defaults

<scope>

command scope

Command Mode: exec : Exec Mode

Command Path:

# show running-config [all] <scope>

show sessions

show sessions [id <log-id>] [action action<action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

Description: Show session-log information

Syntax:

<log-id>

(Optional) Log ID

action<action-type>

(Optional) Object action indicator

<user-name>

(Optional) Name of user

<num-minutes>

(Optional) Logs created in time interval. Number range from=1 to=59

<num-hours>

(Optional) Logs created in time interval. Number range from=1 to=23

<num-days>

(Optional) Logs created in time interval. Number range from=1 to=999

<YYYY-MM-DDTHR:MIN:SEC>

(Optional) Logs created in time interval

end-time <YYYY-MM-DDTHR:MIN:SEC>

(Optional) Logs created in time interval

detail

(Optional) Detailed session-log information. Displays the action trigger that shows why a login occurred.

<scope>

command scope

Command Mode: exec : Exec Mode

Command Path:

# show sessions [id <log-id>] [action action<action-type>] [user <user-name>] [last-minutes <NUMBER>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] <scope>

show sessions controller

show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller

Description: Show controller information

Command Mode: exec : Exec Mode

Command Path:

# show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller

show sessions controller detail

show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]

Description: Detailed controller information

Syntax:

node-id

(Optional) Optional Serial number

Command Mode: exec : Exec Mode

Command Path:

# show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] controller detail [id <node-id>]

show sessions leaf

show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>

Description: Show command for leaf

Syntax:

<leafId>

Leaf id

Command Mode: exec : Exec Mode

Command Path:

# show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] leaf <leafId>

show sessions spine

show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>

Description: Show command for spine

Syntax:

<leafId>

Leaf id

Command Mode: exec : Exec Mode

Command Path:

# show sessions [id <log-id>] [action <action-type>] [user <user-name>] [last-hours <NUMBER>] [last-days <NUMBER>] [start-time <YYYY-MM-DDTHR:MIN:SEC>] [end-time <YYYY-MM-DDTHR:MIN:SEC>] [detail] spine <leafId>

show snapshot active

show snapshot active job

Description: Show command for active snapshot job

Syntax:

job

View active snapshot job

Command Mode: exec : Exec Mode

Command Path:

# show snapshot active job

show snapshot files

show snapshot files

Description: Show command for snapshot files

Command Mode: exec : Exec Mode

Command Path:

# show snapshot files

show snapshot jobs

show snapshot jobs

Description: Show command for snapshot jobs

Command Mode: exec : Exec Mode

Command Path:

# show snapshot jobs

show snmp

show snmp [policy <policy>]

Description: Show snmp policy information

Syntax:

policy

(Optional) SNMP policy name

Command Mode: exec : Exec Mode

Command Path:

# show snmp [policy <policy>]

show snmp clientgroups

show snmp [policy <policy>] clientgroups

Description: Show snmp client group policies

Syntax:

policy

(Optional) SNMP policy name

Command Mode: exec : Exec Mode

Command Path:

# show snmp [policy <policy>] clientgroups

show snmp community

show snmp [policy <policy>] community

Description: Show snmp community information

Syntax:

policy

(Optional) SNMP policy name

Command Mode: exec : Exec Mode

Command Path:

# show snmp [policy <policy>] community

show snmp engineid

show snmp [policy <policy>] engineid

Description: Show snmp v3 engine-id

Syntax:

policy

(Optional) SNMP policy name

Command Mode: exec : Exec Mode

Command Path:

# show snmp [policy <policy>] engineid

show snmp hosts

show snmp [policy <policy>] hosts

Description: Show snmp trap hosts

Syntax:

policy

(Optional) SNMP policy name

Command Mode: exec : Exec Mode

Command Path:

# show snmp [policy <policy>] hosts

show snmp users

show snmp [policy <policy>] users

Description: Show snmp v3 users

Syntax:

policy

(Optional) SNMP policy name

Command Mode: exec : Exec Mode

Command Path:

# show snmp [policy <policy>] users

show stats

show stats granularity <granularity-value> [history] [cumulative] tenant|leaf|spine

Description: Show statistics

Syntax:

granularity

Choose granularity value

<granularity-value>

<granularity-value>

history

(Optional) historical stats information

cumulative

(Optional) cumulative stats information

tenant

command scope

leaf

command scope

spine

command scope

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant|leaf|spine

show stats granularity leaf

show stats granularity <granularity-value> [history] [cumulative] leaf <leafId>

Description: Show command for leaf

Syntax:

<leafId>

Leaf id

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId>

show stats granularity leaf fex

show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> fex <fexNum>

Description: Show extended chassis information

Syntax:

<leafId>

Leaf id

<fexNum>

pls enter fex number

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> fex <fexNum>

show stats granularity leaf fex module

show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> fex <fexNum> module <lcSlot>

Description: Show inventory module information

Syntax:

<leafId>

Leaf id

<fexNum>

pls enter fex number

<lcSlot>

please enter the module number

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> fex <fexNum> module <lcSlot>

show stats granularity leaf interface ethernet

show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface ethernet <phyInt>

Description: Ethernet IEEE 802.3z

Syntax:

<leafId>

Leaf id

<phyInt>

<slot or chassis-number/port or slot number>

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface ethernet <phyInt>

show stats granularity leaf interface mgmt

show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface mgmt <mgmtPort>

Description: Management interface

Syntax:

<leafId>

Leaf id

<mgmtPort>

<Management interface number>

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface mgmt <mgmtPort>

show stats granularity leaf interface portchannel

show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface portchannel <portChan>

Description: Port channel interface

Syntax:

<leafId>

Leaf id

<portChan>

<Port channel number>

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> interface portchannel <portChan>

show stats granularity leaf inventory fans

show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory fans <ftSlot>

Description: Show inventory fan information

Syntax:

<leafId>

Leaf id

<ftSlot>

pls enter fan tray number

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory fans <ftSlot>

show stats granularity leaf inventory powersupply

show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory powersupply <psuSlot>

Description: Show inventory power supply information

Syntax:

<leafId>

Leaf id

<psuSlot>

pls enter the powersupply number

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory powersupply <psuSlot>

show stats granularity leaf inventory supervisor

show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory supervisor <supMod>

Description: Show information for supervisor module

Syntax:

<leafId>

Leaf id

<supMod>

pls enter the supervisor module number

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] leaf <leafId> inventory supervisor <supMod>

show stats granularity spine

show stats granularity <granularity-value> [history] [cumulative] spine <leafId>

Description: Show command for spine

Syntax:

<leafId>

Leaf id

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId>

show stats granularity spine interface ethernet

show stats granularity <granularity-value> [history] [cumulative] spine <leafId> interface ethernet <phyInt>

Description: Ethernet IEEE 802.3z

Syntax:

<leafId>

Leaf id

<phyInt>

<slot or chassis-number/port or slot number>

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> interface ethernet <phyInt>

show stats granularity spine interface mgmt

show stats granularity <granularity-value> [history] [cumulative] spine <leafId> interface mgmt <mgmtPort>

Description: Management interface

Syntax:

<leafId>

Leaf id

<mgmtPort>

<Management interface number>

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> interface mgmt <mgmtPort>

show stats granularity spine inventory chassis

show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory chassis

Description: Show inventory chassis information

Syntax:

<leafId>

Leaf id

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory chassis

show stats granularity spine inventory fabric

show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory fabric <fcMod>

Description: Show information for fabric module

Syntax:

<leafId>

Leaf id

<fcMod>

pls enter the fabric module number

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory fabric <fcMod>

show stats granularity spine inventory fans

show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory fans <ftSlot>

Description: Show inventory fan information

Syntax:

<leafId>

Leaf id

<ftSlot>

pls enter fan tray number

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory fans <ftSlot>

show stats granularity spine inventory module

show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory module <lcSlot>

Description: Show inventory module information

Syntax:

<leafId>

Leaf id

<lcSlot>

please enter the module number

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory module <lcSlot>

show stats granularity spine inventory powersupply

show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory powersupply <psuSlot>

Description: Show inventory power supply information

Syntax:

<leafId>

Leaf id

<psuSlot>

pls enter the powersupply number

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory powersupply <psuSlot>

show stats granularity spine inventory supervisor

show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory supervisor <supMod>

Description: Show information for supervisor module

Syntax:

<leafId>

Leaf id

<supMod>

pls enter the supervisor module number

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory supervisor <supMod>

show stats granularity spine inventory system

show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory system <sysMod>

Description: Show information for system module

Syntax:

<leafId>

Leaf id

<sysMod>

pls enter the system module number

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] spine <leafId> inventory system <sysMod>

show stats granularity tenant

show stats granularity <granularity-value> [history] [cumulative] tenant WORD

Description: Show Tenants Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD

show stats granularity tenant application

show stats granularity <granularity-value> [history] [cumulative] tenant WORD application WORD

Description: Show Application Profiles Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD application WORD

show stats granularity tenant application epg

show stats granularity <granularity-value> [history] [cumulative] tenant WORD application WORD epg WORD

Description: Show Application EPG Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

WORD

Name of the AEPG to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show stats granularity <granularity-value> [history] [cumulative] tenant WORD application WORD epg WORD

show switch

show switch

Description: Show switch information

Command Mode: exec : Exec Mode

Command Path:

# show switch

show switch detail

show switch detail [id <switch-id>]

Description: Show switch detailed information

Syntax:

switch-id

(Optional) Optional switch id. Number range from=0 to=9223372036854775807

Command Mode: exec : Exec Mode

Command Path:

# show switch detail [id <switch-id>]

show tacacs-server

show tacacs-server

Description: Show tacacs server information

Command Mode: exec : Exec Mode

Command Path:

# show tacacs-server

show techsupport all

show techsupport all status

Description: Techsupport status for all

Syntax:

status

Status

Command Mode: exec : Exec Mode

Command Path:

# show techsupport all status

show techsupport controllers

show techsupport controllers status

Description: Techsupport status for controllers

Syntax:

status

Status

Command Mode: exec : Exec Mode

Command Path:

# show techsupport controllers status

show techsupport host

show techsupport host <NUMBER> status

Description: Techsupport status for host

Syntax:

<Odevid>

Specify the host Odev ID. Number range from=0 to=9223372036854775807

status

Status

Command Mode: exec : Exec Mode

Command Path:

# show techsupport host <NUMBER> status

show techsupport switch

show techsupport switch switchId <switchId> status

Description: Techsupport status for switch

Syntax:

switchId <switchId>

switch id 101-4000 or range(s): 101-103,104

status

Status

Command Mode: exec : Exec Mode

Command Path:

# show techsupport switch switchId <switchId> status

show tenant

show tenant WORD

Description: Show Tenants Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD

show tenant access-list

show tenant WORD access-list WORD

Description: Show Access-list Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the Contract to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD access-list WORD

show tenant application

show tenant WORD application WORD

Description: Show Application Profiles Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD application WORD

show tenant application endpoints

show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]

Description: Show IP endpoints

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]

show tenant application endpoints leaf interface ethernet

show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>

Description: Show IP endpoints on an interface ethernet

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

WORD

Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807

ethernet [<fex>/]<slot>/<port>

Ethernet Range

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>

show tenant application endpoints leaf interface port-channel

show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]

Description: Show IP endpoints on an interface port-channel

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

WORD

Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807

WORD

Port Channel Name (Max Size 64)

<101-164>

(Optional) Fex Id. Number range from=101 to=164

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]

show tenant application endpoints vpc

show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]

Description: Show IP endpoints on vpc

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

context

VPC Context

WORD

First VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807

WORD

Second VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807

interface

VPC Interface name

vpc

VPC Interface name

WORD

VPC Name (Max Size 64)

fex

(Optional) Fex Id. Number range from=101 to=164

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD application WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]

show tenant application epg

show tenant WORD application WORD epg WORD

Description: Show Application EPG Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

WORD

Name of the AEPG to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD application WORD epg WORD

show tenant application epg detail

show tenant WORD application WORD epg WORD detail

Description: Show detailed view of Application EPg

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

WORD

Name of the AEPG to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD application WORD epg WORD detail

show tenant application epg endpoints

show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]

Description: Show IP endpoints

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

WORD

Name of the AEPG to filter on (Max Size 64)

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]

show tenant application epg endpoints leaf interface ethernet

show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>

Description: Show IP endpoints on an interface ethernet

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

WORD

Name of the AEPG to filter on (Max Size 64)

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

WORD

Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807

ethernet [<fex>/]<slot>/<port>

Ethernet Range

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>

show tenant application epg endpoints leaf interface port-channel

show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]

Description: Show IP endpoints on an interface port-channel

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

WORD

Name of the AEPG to filter on (Max Size 64)

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

WORD

Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807

WORD

Port Channel Name (Max Size 64)

<101-164>

(Optional) Fex Id. Number range from=101 to=164

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]

show tenant application epg endpoints vpc

show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]

Description: Show IP endpoints on vpc

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the application we eventually want to filter on (Max Size 64)

WORD

Name of the AEPG to filter on (Max Size 64)

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

context

VPC Context

WORD

First VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807

WORD

Second VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807

interface

VPC Interface name

vpc

VPC Interface name

WORD

VPC Name (Max Size 64)

fex

(Optional) Fex Id. Number range from=101 to=164

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD application WORD epg WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]

show tenant bridge-domain

show tenant WORD bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD bridge-domain WORD

show tenant bridge-domain detail

show tenant WORD bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD bridge-domain WORD detail

show tenant contract-type

show tenant WORD contract-type WORD

Description: Show Contracts Information Based on Type

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

whitelist (permit) or blacklist(deny) or oob-mgmt type of contract

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD contract-type WORD

show tenant contract

show tenant WORD contract WORD

Description: Show Contracts Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the Contract to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD contract WORD

show tenant detail

show tenant WORD detail

Description: Show detailed view of tenant

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD detail

show tenant endpoints

show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]

Description: Show IP endpoints

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>]

show tenant endpoints leaf interface ethernet

show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>

Description: Show IP endpoints on an interface ethernet

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

WORD

Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807

ethernet [<fex>/]<slot>/<port>

Ethernet Range

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface ethernet ethernet [<fex>/]<slot>/<port>

show tenant endpoints leaf interface port-channel

show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]

Description: Show IP endpoints on an interface port-channel

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

WORD

Leaf Number (Max Size 4000). Number range from=0 to=9223372036854775807

WORD

Port Channel Name (Max Size 64)

<101-164>

(Optional) Fex Id. Number range from=101 to=164

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] leaf <WORD> interface port-channel <WORD> [fex <NUMBER>]

show tenant endpoints vpc

show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]

Description: Show IP endpoints on vpc

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

type

(Optional) Endpoint Type

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

<1-4094>

(Optional) Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D

(Optional) IP address in format i.i.i.i

A:B::C:D

(Optional) IPv6 address in format xxxx:xxxx, xxxx::xx

context

VPC Context

WORD

First VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807

WORD

Second VPC leaf (Max Size 4000). Number range from=0 to=9223372036854775807

interface

VPC Interface name

vpc

VPC Interface name

WORD

VPC Name (Max Size 64)

fex

(Optional) Fex Id. Number range from=101 to=164

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD endpoints [type <type>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] [vlan <NUMBER>] [ip <A.B.C.D>] [ipv6 <A:B::C:D>] vpc context <WORD> <WORD> interface vpc <WORD> [fex <fex>]

show tenant epg

show tenant WORD epg WORD

Description: Show Application EPG Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the AEPG to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD epg WORD

show tenant epg detail

show tenant WORD epg WORD detail

Description: Show detailed view of Application EPg

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the AEPG to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD epg WORD detail

show tenant external-l2 epg

show tenant WORD external-l2 epg WORD

Description: Show command for external-l2 epgs

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the EPG to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD external-l2 epg WORD

show tenant interface bridge-domain

show tenant WORD interface bridge-domain WORD

Description: Show Bridge-domain Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD interface bridge-domain WORD

show tenant interface bridge-domain detail

show tenant WORD interface bridge-domain WORD detail

Description: Show Bridge-domain Detailed Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD interface bridge-domain WORD detail

show tenant ip interface bridge-domain

show tenant WORD ip interface bridge-domain WORD

Description: Show command for IP properties on interface BD

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD ip interface bridge-domain WORD

show tenant ipv6 interface bridge-domain

show tenant WORD ipv6 interface bridge-domain WORD

Description: Show command for IP properties on interface BD

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the bridge-domain (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD ipv6 interface bridge-domain WORD

show tenant policy-map

show tenant WORD policy-map

Description: Show policy maps

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD policy-map

show tenant policy-map type data-plane

show tenant WORD policy-map type data-plane WORD

Description: data-plane type policy-map(s)

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

data-plane type policy-map(s) (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD policy-map type data-plane WORD

show tenant policy-map type qos

show tenant WORD policy-map type qos WORD

Description: QOS type policy-map(s)

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

QOS type policy-map(s) (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD policy-map type qos WORD

show tenant vrf

show tenant WORD vrf WORD

Description: Show VRF Information

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD

show tenant vrf detail

show tenant WORD vrf WORD detail

Description: Show detailed view of VRF

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD detail

show tenant vrf external-l3 bgp

show tenant WORD vrf WORD external-l3 bgp

Description: Show command for BGP peers

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 bgp

show tenant vrf external-l3 bgp node

show tenant WORD vrf WORD external-l3 bgp node <101-4000>

Description: node to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<101-4000>

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 bgp node <101-4000>

show tenant vrf external-l3 eigrp

show tenant WORD vrf WORD external-l3 eigrp

Description: Show external l3 EIGRP

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 eigrp

show tenant vrf external-l3 eigrp detail

show tenant WORD vrf WORD external-l3 eigrp detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 eigrp detail

show tenant vrf external-l3 epg

show tenant WORD vrf WORD external-l3 epg <epgName>

Description: Show command for external-l3 epgs

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 epg <epgName>

show tenant vrf external-l3 epg detail

show tenant WORD vrf WORD external-l3 epg <epgName> detail

Description: external-l3 epg in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 epg <epgName> detail

show tenant vrf external-l3 epg name

show tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

Description: EPG name to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 epg <epgName> name <epgName>

show tenant vrf external-l3 epg name detail

show tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail

Description: external-l3 epg in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<epgName>

Name of the EPG to filter on

<epgName>

Name of the EPG to filter on

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 epg <epgName> name <epgName> detail

show tenant vrf external-l3 interfaces

show tenant WORD vrf WORD external-l3 interfaces

Description: Show tenant <tenant> vrf <vrf> external l3 interfaces

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 interfaces

show tenant vrf external-l3 interfaces detail

show tenant WORD vrf WORD external-l3 interfaces detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 interfaces detail

show tenant vrf external-l3 ospf

show tenant WORD vrf WORD external-l3 ospf

Description: Show commad for IPv4 and IPv6 external l3 OSPF configuration

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 ospf

show tenant vrf external-l3 ospf detail

show tenant WORD vrf WORD external-l3 ospf detail

Description: Show interanl details

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 ospf detail

show tenant vrf external-l3 route-map

show tenant WORD vrf WORD external-l3 route-map [name <l3out name>]

Description: Show command for external-l3 route-map

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<l3out name>

(Optional) Name of the route-map to filter on

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 route-map [name <l3out name>]

show tenant vrf external-l3 route-map detail

show tenant WORD vrf WORD external-l3 route-map [name <l3out name>] detail

Description: Show external-l3 route-map in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

<l3out name>

(Optional) Name of the route-map to filter on

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 route-map [name <l3out name>] detail

show tenant vrf external-l3 static-route

show tenant WORD vrf WORD external-l3 static-route

Description: Show command for external-l3 static routes

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 static-route

show tenant vrf external-l3 static-route detail

show tenant WORD vrf WORD external-l3 static-route detail

Description: static-route in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 static-route detail

show tenant vrf external-l3 static-route node

show tenant WORD vrf WORD external-l3 static-route node

Description: node to filter on

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 static-route node

show tenant vrf external-l3 static-route node detail

show tenant WORD vrf WORD external-l3 static-route node detail

Description: static-route in detail with operational status

Syntax:

WORD

Name of the tenant to filter on (Max Size 63)

WORD

Name of the VRF to filter on (Max Size 64)

arg

Leaf Range or Leaf Name List

Command Mode: exec : Exec Mode

Command Path:

# show tenant WORD vrf WORD external-l3 static-route node detail

show troubleshoot epext session

show troubleshoot epext session <session_name>

Description: Show session

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot epext session <session_name>

show troubleshoot epext session atomiccounter

show troubleshoot epext session <session_name> atomiccounter

Description: Show atomic counters

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot epext session <session_name> atomiccounter

show troubleshoot epext session audit

show troubleshoot epext session <session_name> audit

Description: Show audit

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot epext session <session_name> audit

show troubleshoot epext session contracts

show troubleshoot epext session <session_name> contracts

Description: Show contracts

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot epext session <session_name> contracts

show troubleshoot epext session deployments

show troubleshoot epext session <session_name> deployments

Description: Show deployment changes

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot epext session <session_name> deployments

show troubleshoot epext session events

show troubleshoot epext session <session_name> events

Description: Show events

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot epext session <session_name> events

show troubleshoot epext session faults

show troubleshoot epext session <session_name> faults

Description: Show faults

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot epext session <session_name> faults

show troubleshoot epext session monitor

show troubleshoot epext session <session_name> monitor

Description: Show monitor

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot epext session <session_name> monitor

show troubleshoot epext session reports

show troubleshoot epext session <session_name> reports

Description: Show reports

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot epext session <session_name> reports

show troubleshoot epext session statistics

show troubleshoot epext session <session_name> statistics

Description: Show statistics

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot epext session <session_name> statistics

show troubleshoot epext session topology

show troubleshoot epext session <session_name> topology

Description: Show topology

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot epext session <session_name> topology

show troubleshoot epext session traceroute

show troubleshoot epext session <session_name> traceroute

Description: Show traceroute

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot epext session <session_name> traceroute

show troubleshoot epext sessions

show troubleshoot epext sessions

Description: Show sessions

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot epext sessions

show troubleshoot eptoep session

show troubleshoot eptoep session <session_name>

Description: Show session

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot eptoep session <session_name>

show troubleshoot eptoep session atomiccounter

show troubleshoot eptoep session <session_name> atomiccounter

Description: Show atomic counters

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot eptoep session <session_name> atomiccounter

show troubleshoot eptoep session audit

show troubleshoot eptoep session <session_name> audit

Description: Show audit

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot eptoep session <session_name> audit

show troubleshoot eptoep session contracts

show troubleshoot eptoep session <session_name> contracts

Description: Show contracts

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot eptoep session <session_name> contracts

show troubleshoot eptoep session deployments

show troubleshoot eptoep session <session_name> deployments

Description: Show deployment changes

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot eptoep session <session_name> deployments

show troubleshoot eptoep session events

show troubleshoot eptoep session <session_name> events

Description: Show events

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot eptoep session <session_name> events

show troubleshoot eptoep session faults

show troubleshoot eptoep session <session_name> faults

Description: Show faults

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot eptoep session <session_name> faults

show troubleshoot eptoep session monitor

show troubleshoot eptoep session <session_name> monitor

Description: Show monitor

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot eptoep session <session_name> monitor

show troubleshoot eptoep session reports

show troubleshoot eptoep session <session_name> reports

Description: Show reports

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot eptoep session <session_name> reports

show troubleshoot eptoep session statistics

show troubleshoot eptoep session <session_name> statistics

Description: Show statistics

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot eptoep session <session_name> statistics

show troubleshoot eptoep session topology

show troubleshoot eptoep session <session_name> topology

Description: Show topology

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot eptoep session <session_name> topology

show troubleshoot eptoep session traceroute

show troubleshoot eptoep session <session_name> traceroute

Description: Show traceroute

Syntax:

session_name

Session name

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot eptoep session <session_name> traceroute

show troubleshoot eptoep sessions

show troubleshoot eptoep sessions

Description: Show sessions

Command Mode: exec : Exec Mode

Command Path:

# show troubleshoot eptoep sessions

show username

show username <WORD>

Description: Show user information

Syntax:

WORD

User name

Command Mode: exec : Exec Mode

Command Path:

# show username <WORD>

show username detail

show username <WORD> detail

Description: Show user information

Syntax:

WORD

User name

Command Mode: exec : Exec Mode

Command Path:

# show username <WORD> detail

show version

show version

Description: Show version information

Command Mode: exec : Exec Mode

Command Path:

# show version

show vlan-domain

show vlan-domain [name <arg>] [vlan] [leaf <arg>] [detail]

Description: Show command for vlan-domain

Syntax:

arg

(Optional) Vlan-domain name

<vlan-range>

(Optional) VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

arg

(Optional) Leaf id. Number range from=101 to=4000

detail

(Optional) vlan-domain in detail with concrete MOs

Command Mode: exec : Exec Mode

Command Path:

# show vlan-domain [name <>] [vlan] [leaf <>] [detail]

show vmware domain

show vmware domain

Description: Show VMware domain information

Command Mode: exec : Exec Mode

Command Path:

# show vmware domain

show vmware domain name

show vmware domain name <name>

Description: VMware domain name

Syntax:

<name>

VMware domain name

Command Mode: exec : Exec Mode

Command Path:

# show vmware domain name <name>

show vmware domain name epg

show vmware domain name <name> epg

Description: Show VMware domain EPG details

Syntax:

<name>

VMware domain name

Command Mode: exec : Exec Mode

Command Path:

# show vmware domain name <name> epg

show vmware domain name esx

show vmware domain name <name> esx <esx-ip>

Description: Show VMware ESX information

Syntax:

<name>

VMware domain name

<esx-ip>

ESX IP

Command Mode: exec : Exec Mode

Command Path:

# show vmware domain name <name> esx <esx-ip>

show vmware domain name port-group

show vmware domain name <name> port-group

Description: Show VMware port group information

Syntax:

<name>

VMware domain name

Command Mode: exec : Exec Mode

Command Path:

# show vmware domain name <name> port-group

show vmware domain name vcenter

show vmware domain name <name> vcenter <hostname|ip>

Description: VMware vCenter ip or hostname

Syntax:

<name>

VMware domain name

<hostname|ip>

vCenter hostname or IP

Command Mode: exec : Exec Mode

Command Path:

# show vmware domain name <name> vcenter <hostname|ip>

show vmware domain name vm

show vmware domain name <name> vm

Description: Show VMware VM information

Syntax:

<name>

VMware domain name

Command Mode: exec : Exec Mode

Command Path:

# show vmware domain name <name> vm

show vmware domain name vm name

show vmware domain name <name> vm name <vm-name>

Description: Show detailed VMware VM information

Syntax:

<name>

VMware domain name

<vm-name>

VM Name

Command Mode: exec : Exec Mode

Command Path:

# show vmware domain name <name> vm name <vm-name>

show vmware vm

show vmware vm [name <WORD>] [ip <A.B.C.D>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]

Description: Show VMware VM information

Syntax:

WORD

(Optional) Specify a VM name

A.B.C.D

(Optional) IP address in format i.i.i.i

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

Command Mode: exec : Exec Mode

Command Path:

# show vmware vm [name <WORD>] [ip <A.B.C.D>] [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]

show vpc

show vpc map <vpc-list>

Description: show vpc mapping

Syntax:

map

map by name

<vpc-list>

vpc names

Command Mode: exec : Exec Mode

Command Path:

# show vpc map <vpc-list>

show vpc map leaf

show vpc map <vpc-list> leaf WORD [fex <NUMBER>]

Description: leaf

Syntax:

map

map by name

<vpc-list>

vpc names

WORD

Leaf Range or Leaf Name List

<101-164>

(Optional) Fex ID. Number range from=101 to=164

Command Mode: exec : Exec Mode

Command Path:

# show vpc map <vpc-list> leaf WORD [fex <NUMBER>]

show vrf

show vrf WORD

Description: Show VRF Information

Syntax:

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show vrf WORD

show vrf detail

show vrf WORD detail

Description: Show detailed view of VRF

Syntax:

WORD

Name of the VRF to filter on (Max Size 64)

Command Mode: exec : Exec Mode

Command Path:

# show vrf WORD detail

shut

shut

Description: Disable BFD

Command Mode: template bfd : Configure BFD Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template bfd <WORD> tenant <WORD>
(config-template-bfd-pol)# shut

shut

Description: Disable monitor session

Command Mode: monitor virtual : Configure monitor session for virtual switches

Command Path:

# configure [['terminal', 't']]
(config)# monitor virtual session <WORD>
(config-monitor-virtual)# shut

shutdown

shutdown

Description: Administrative state of the Policer

Command Mode: policy-map : Create a policymap of DataPlane type to police/reclassify the traffic

Command Path:

# configure [['terminal', 't']]
(config)# policy-map type data-plane <WORD>
(config-pmap-dpp)# shutdown

shutdown

Description: Disable the class of service specified

Command Mode: qos parameters : Configure the global QOS policies

Command Path:

# configure [['terminal', 't']]
(config)# qos parameters level1|level2|level3
(config-qos)# shutdown

shutdown

Description: Administrative state of the Policer

Command Mode: policy-map type data-plane : data-plane policy type

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# policy-map type data-plane <WORD>
(config-tenant-pmap-dpp)# shutdown

shutdown

Description: Disable Interface

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# shutdown

shutdown

Description: Disable Port Channel

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# shutdown

shutdown

Description: Disable interface

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# shutdown

shutdown

Description: Disable monitor session

Command Mode: monitor access : Configue monitor session for access interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# shutdown

shutdown

Description: Disable monitor session

Command Mode: monitor fabric : Configue monitor session for fabric interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor fabric session <session_name>
(config-monitor-fabric)# shutdown

shutdown

Description: Disable monitor session

Command Mode: monitor tenant : Configue monitor session for tenant EPGs

Command Path:

# configure [['terminal', 't']]
(config)# monitor tenant <tenant_name> session <session_name>
(config-monitor-tenant)# shutdown

site-id

site-id <WORD>

Description: ID of the network where the site is deployed

Syntax:

WORD

The site id (Max Size 512) surrounded by quotes

Command Mode: destination-profile : Configure destination profile Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# destination-profile
(config-callhome-destnprof)# site-id <WORD>

slow-timer

slow-timer <NUMBER>

Description: Configure BFD SLOW-TIMER value in milliseconds

Syntax:

<interval>

BFD interval. Number range from=1000 to=30000

Command Mode: template bfd : BFD group of commands

Command Path:

# configure [['terminal', 't']]
(config)# template bfd ip|ipv6 <WORD>
(config-bfd)# slow-timer <NUMBER>

snapshot download

snapshot download <WORD>

Description: Configuration snapshot download setup mode

Syntax:

WORD

Snapshot downloader name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot download <WORD>

snapshot export

snapshot export <WORD>

Description: Configuration export setup mode

Syntax:

WORD

Export configuration name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot export <WORD>

snapshot import

snapshot import <WORD>

Description: Configuration import setup mode

Syntax:

WORD

Import configuration name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot import <WORD>

snapshot rollback

snapshot rollback <WORD>

Description: Configuration rollback setup mode

Syntax:

WORD

Rollback configuration name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot rollback <WORD>

snapshot upload

snapshot upload <WORD>

Description: Configuration snapshot upload setup mode

Syntax:

WORD

Snapshot uploader name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot upload <WORD>

snmp-server clientgroup

snmp-server clientgroup <group-name> [management-epg <mgmt-epg>] [client <ip-address/hostname>]

Description: Configure SNMP client-group

Syntax:

<group-name>

SNMP clientgroup

<mgmt-epg>

(Optional) Management EPG (default: oob-default)

<ip-address/hostname>

(Optional) Ip-address/hostname of the snmp client

Command Mode: pod : Pod configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# snmp-server clientgroup <group-name> [management-epg <mgmt-epg>] [client <ip-address/hostname>]

snmp-server community

snmp-server community <community-name>

Description: Configure SNMP community

Syntax:

<community-name>

SNMP community

Command Mode: pod : Pod configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# snmp-server community <community-name>

snmp-server contact

snmp-server contact <contact-name>

Description: Configure SNMP contact

Syntax:

<contact-name>

SNMP contact name

Command Mode: pod : Pod configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# snmp-server contact <contact-name>

snmp-server host

snmp-server host <ip-address/hostname> traps-version 1|2c|3 <community> auth|none|priv [udp-port <port>] [management-epg <mgmt-epg>]

Description: Configure SNMP trap host

Syntax:

<ip-address/hostname>

Ip-address/hostname of the snmp trap destination

traps-version

SNMP Version to use for traps

1

Use SNMPv1

2c

Use SNMPv2

3

Use SNMPv3

<community>

SNMP community/security

auth

Use Authentication Only

none

Use No Authentication

priv

Use Authentication and Encryption

<port>

(Optional) UDP port for traps (default 162)

<mgmt-epg>

(Optional) Management EPG (default: oob-default)

Command Mode: pod : Pod configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# snmp-server host <ip-address/hostname> traps-version 1|2c|3 <community> auth|none|priv [udp-port <port>] [management-epg <mgmt-epg>]

snmp-server location

snmp-server location <location-name>

Description: Configure SNMP location

Syntax:

<location-name>

SNMP location

Command Mode: pod : Pod configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# snmp-server location <location-name>

snmp-server protocol

snmp-server protocol enable

Description: Enable SNMP protocol

Syntax:

enable

Enable SNMP protocol

Command Mode: pod : Pod configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# snmp-server protocol enable

snmp-server user

snmp-server user <user-name> auth sha|md5 <auth-key> priv aes|des|none [privacy-passphrase <priv-key>]

Description: Configure SNMP user

Syntax:

<user-name>

SNMP user

auth

Authentication Type

sha

Use HMAC SHA algorithm for authentication

md5

Use HMAC MD5 algorithm for authentication

<auth-key>

Authentication password for user (Min Size 8, Max Size 130)

priv

Privacy Type

aes

Use 128-bit AES algorithm for privacy

des

Use 64-bit DES algorithm for privacy

none

Do not use privacy

<priv-key>

(Optional) Privacy passphrase for user (Min Size 8, Max Size 130)

Command Mode: pod : Pod configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# snmp-server user <user-name> auth sha|md5 <auth-key> priv aes|des|none [privacy-passphrase <priv-key>]

source

source tenant <WORD> application <WORD> epg <WORD> [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]

Description: Configure monitor virtual source

Syntax:

tenant

tenant

WORD

tenant name (Max Size 63)

application

application

WORD

application name (Max Size 64)

epg

epg

WORD

epg name (Max Size 64)

E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE

(Optional) MAC address (Option 1) MAC address (Option 2) MAC address (Option 3) MAC address (Option 4)

Command Mode: monitor virtual : Configure monitor session for virtual switches

Command Path:

# configure [['terminal', 't']]
(config)# monitor virtual session <WORD>
(config-monitor-virtual)# source tenant <WORD> application <WORD> epg <WORD> [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >]

source application

source application <application_name> epg <epg_name>

Description: Configure EPG as monitor source

Syntax:

application_name

application name (Max Size 64)

epg

epg

epg_name

epg name (Max Size 64)

Command Mode: monitor tenant : Configue monitor session for tenant EPGs

Command Path:

# configure [['terminal', 't']]
(config)# monitor tenant <tenant_name> session <session_name>
(config-monitor-tenant)# source application <application_name> epg <epg_name>

source interface ethernet

source interface ethernet <ethernet> leaf <leaf Id>

Description: Configure monitor for ethernet access interfaces

Syntax:

<ethernet>

List of ethernet itfs

leaf

leaf

<leaf Id>

leaf Id

Command Mode: monitor access : Configue monitor session for access interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# source interface ethernet <ethernet> leaf <leaf Id>

source interface ethernet <ethernet> switch <switch Id>

Description: Configure monitor for ethernet fabric interfaces

Syntax:

<ethernet>

ethernet interface range

switch

switch

<switch Id>

switch Id

Command Mode: monitor fabric : Configue monitor session for fabric interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor fabric session <session_name>
(config-monitor-fabric)# source interface ethernet <ethernet> switch <switch Id>

source interface port-channel

source interface port-channel <port-channel list> leaf <leaf Id> [fex <fex Id>]

Description: Configure monitor for port-channel interfaces

Syntax:

<port-channel list>

<port-channel list>

leaf

leaf

<leaf Id>

leaf Id

<fex Id>

(Optional) fex Id

Command Mode: monitor access : Configue monitor session for access interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# source interface port-channel <port-channel list> leaf <leaf Id> [fex <fex Id>]

source interface vpc

source interface vpc <vpc list> leaf <leaf Id1> <leaf Id2> [fex <fex Ids>]

Description: Configure monitor for VPC interfaces

Syntax:

<vpc list>

<vpc list>

leaf

leaf

<leaf Id1>

leaf Id1

<leaf Id2>

leaf Id2

<fex Ids>

(Optional) paired fex Ids

Command Mode: monitor access : Configue monitor session for access interfaces

Command Path:

# configure [['terminal', 't']]
(config)# monitor access session <session_name>
(config-monitor-access)# source interface vpc <vpc list> leaf <leaf Id1> <leaf Id2> [fex <fex Ids>]

spanning-tree

spanning-tree mst configuration

Description: STP MST configuration mode

Syntax:

mst

Multiple spanning tree

configuration

Configure multiple spanning tree protocol

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# spanning-tree mst configuration

spanning-tree

Description: Add spanning tree

Command Mode: template leaf-policy-group : Configure Leaf Policy Group

Command Path:

# configure [['terminal', 't']]
(config)# template leaf-policy-group <WORD>
(config-leaf-policy-group)# spanning-tree

spanning-tree bpdu-filter|bpdu-guard <enable|disable>

Description: Enable or Disable BPDU filter/guard

Syntax:

bpdu-filter

Don't send or receive BPDUs on this interface

bpdu-guard

Don't accept BPDUs on this interface

<enable|disable>

enable/disable BPDU filter/guard

Command Mode: template policy-group : Configure Policy Group Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>

spanning-tree bpdu-filter|bpdu-guard <enable|disable>

Description: enable BPDU filter/guard

Syntax:

bpdu-filter

Don't send or receive BPDUs on this interface

bpdu-guard

Don't accept BPDUs on this interface

<enable|disable>

enable/disable BPDU filter/guard

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>

spanning-tree bpdu-filter|bpdu-guard <enable|disable>

Description: Enable or disable BPDU filter/guard

Syntax:

bpdu-filter

Don't send or receive BPDUs on this interface

bpdu-guard

Don't accept BPDUs on this interface

<enable|disable>

enable/disable BPDU filter/guard

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>

spanning-tree bpdu-filter|bpdu-guard <enable|disable>

Description: enable BPDU filter/guard

Syntax:

bpdu-filter

Don't send or receive BPDUs on this interface

bpdu-guard

Don't accept BPDUs on this interface

<enable|disable>

enable/disable BPDU filter/guard

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>

spanning-tree bpdu-filter|bpdu-guard <enable|disable>

Description: Spanning Tree Subsystem

Syntax:

bpdu-filter

Don't send or receive BPDUs on this interface

bpdu-guard

Don't accept BPDUs on this interface

<enable|disable>

enable/disable BPDU filter/guard

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# spanning-tree bpdu-filter|bpdu-guard <enable|disable>

spanning-tree bpdu-filter

spanning-tree bpdu-filter enable|disable|default

Description: Configure BPDU filter override on AVS uplink ports

Syntax:

enable

Enable BPDU filter

disable

Disable BPDU filter

default

Remove BPDU filter/guard override policy

Command Mode: configure-avs : Configure a VMware Domain as AVS (N1K) type

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-avs
(config-vmware-avs)# spanning-tree bpdu-filter enable|disable|default

spanning-tree bpdu-guard

spanning-tree bpdu-guard enable|disable|default

Description: Configure BPDU guard override on AVS uplink ports

Syntax:

enable

Enable BPDU guard

disable

Disable BPDU guard

default

Remove BPDU filter/guard override policy

Command Mode: configure-avs : Configure a VMware Domain as AVS (N1K) type

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-avs
(config-vmware-avs)# spanning-tree bpdu-guard enable|disable|default

speed

speed <interfaceSpeed>

Description: Configure Interface Speed

Syntax:

<interfaceSpeed>

Interface Speed Policy

Command Mode: template policy-group : Configure Policy Group Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# speed <interfaceSpeed>

speed <portChannelSpeed>

Description: Configure Interface Speed

Syntax:

<portChannelSpeed>

Port-Channel Speed Policy

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# speed <portChannelSpeed>

speed <interfaceSpeed>

Description: Configure Interface Speed

Syntax:

<interfaceSpeed>

Interface Speed Policy

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# speed <interfaceSpeed>

speed <speed>

Description: Configure Interface Speed

Syntax:

<speed>

Speed Value

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# speed <speed>

speed <speed>

Description: Configure Interface Speed

Syntax:

<speed>

Interface Speed Policy

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# speed <speed>

spf-interval

spf-interval level-1 <NUMBER> <50-120000> <50-120000>

Description: Set the ISIS SPF maximal wait interval

Syntax:

level-1

Level 1

<50-120000>

SPF maximum wait interval. Number range from=50 to=120000

<50-120000> <50-120000>

Initial and secondary wait intervals (both values are required)

Command Mode: isis : Intermediate System to Intermediate System (IS-IS)

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# isis fabric
(config-pod-isis)# spf-interval level-1 <NUMBER> <50-120000> <50-120000>

ssh-key

ssh-key <WORD>

Description: Update ssh key for the user for ssh authentication

Syntax:

WORD

A name for SSH key (Max Size 64)

Command Mode: username : Create a locally-authenticated user account

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>
(config-username)# ssh-key <WORD>

ssh-service

ssh-service

Description: SSH communication policy group

Command Mode: comm-policy : Configure any communication policy, ssh/telnet/shellinabox/http/https

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# ssh-service

ssl-protocols

ssl-protocols <sslProtocols>

Description: Set the SSL protocol (comma separated values)

Syntax:

sslProtocols

SSL Protocols as comma separated values like val1,val2,..valN

Command Mode: https : HTTPS communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# https
(config-https)# ssl-protocols <sslProtocols>

ssl-validation-level

ssl-validation-level <ssl-validation-level>

Description: Set the LDAP Server SSL Certificate validation level

Syntax:

<ssl-validation-level>

<ssl-validation-level>

Command Mode: ldap-server host : LDAP server DNS name or IP address

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# ssl-validation-level <ssl-validation-level>

state

state <WORD>

Description: Set The state or province in which the organization is located.

Syntax:

<WORD>

state or province (Max Size 64)

Command Mode: csr : A csr mode to create and hold an SSL certificate

Command Path:

# configure [['terminal', 't']]
(config)# crypto keyring <WORD>
(config-keyring)# csr
(config-csr)# state <WORD>

state <cipherState>

Description: Cipher state

Syntax:

cipherState

Cipher state as comma separated values like val1,val2,..valN

Command Mode: ciphers : HTTPS cipher suite

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# https
(config-https)# ciphers <WORD>
(config-ciphers)# state <cipherState>

static-endpoint

static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

Description: Configure Silent Host behind a EPG with a Static Path Attachment

Syntax:

mac

MAC address

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

vlan

Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

A1.B1.C1.D1,...,An.Bn.Cn.Dn

(Optional) List of IP addresses in format i.i.i.i

A1:B1::C1:D1,..,An:Bn::Cn:Dn

(Optional) List of IPv6 address in format xxxx:xxxx, xxxx::xx

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

Description: Configure silent Host behind a EPG with a Static Path Attachment

Syntax:

mac

MAC address

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

vlan

Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

A1.B1.C1.D1,...,An.Bn.Cn.Dn

(Optional) List of IP addresses in format i.i.i.i

A1:B1::C1:D1,..,An:Bn::Cn:Dn

(Optional) List of IPv6 address in format xxxx:xxxx, xxxx::xx

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

Description: Configure silent Host behind a EPG with a Static Path Attachment

Syntax:

mac

MAC address

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

vlan

Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

A1.B1.C1.D1,...,An.Bn.Cn.Dn

(Optional) List of IP addresses in format i.i.i.i

A1:B1::C1:D1,..,An:Bn::Cn:Dn

(Optional) List of IPv6 address in format xxxx:xxxx, xxxx::xx

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# static-endpoint mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> [ip <A1.B1.C1.D1,...,An.Bn.Cn.Dn>] [ipv6 <A1:B1::C1:D1,..,An:Bn::Cn:Dn>]

static-tep

static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> <A.B.C.D>

Description: Configure a static Tunnel Endpoint behind a EPG with a Static Path Attachment

Syntax:

mac

MAC address

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

vlan

Encapsulation Vlan

<1-4094>

VLAN range. Number range from=1 to=4094

A.B.C.D

IP address in format i.i.i.i

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> <A.B.C.D>

static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> <A.B.C.D>

Description: Configure a static Tunnel Endpoint behind a EPG with a Static Path Attachment

Syntax:

mac

MAC address

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

vlan

Encapsulation Vlan

<1-4094>

VLAN range. Number range from=1 to=4094

A.B.C.D

IP address in format i.i.i.i

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> <A.B.C.D>

static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> <A.B.C.D>

Description: Configure a static Tunnel Endpoint behind a EPG with a Static Path Attachment

Syntax:

mac

MAC address

E.E.E

MAC address (Option 1)

EE-EE-EE-EE-EE-EE

MAC address (Option 2)

EE:EE:EE:EE:EE:EE

MAC address (Option 3)

EEEE.EEEE.EEEE

MAC address (Option 4)

vlan

Encapsulation Vlan

<1-4094>

VLAN range. Number range from=1 to=4094

A.B.C.D

IP address in format i.i.i.i

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# static-tep mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE vlan <NUMBER> <A.B.C.D>

statistics

statistics enable

Description: Enable/disable stats collection on VCenter (DVS-only)

Syntax:

enable

enable

Command Mode: vcenter : Configure a VCenter in the VMware domain

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# vcenter <> datacenter <WORD> [dvs-version <>]
(config-vmware-vc)# statistics enable

storm-control level

storm-control level <0-100> [burst-rate <0-100>]

Description: Configure Storm Control Level (bandwidth percentage) on the Interface

Syntax:

<0-100>

Rate of Bandwidth in Percentage

<0-100>

(Optional) Max Rate of Bandwidth in Percentage

Command Mode: template policy-group : Configure Policy Group Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# storm-control level <0-100> [burst-rate <0-100>]

storm-control level <0-100> [burst-rate <0-100>]

Description: Configure Storm Control Level (bandwidth percentage) on the Interface

Syntax:

<0-100>

Rate of Bandwidth in Percentage

<0-100>

(Optional) Max Rate of Bandwidth in Percentage

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# storm-control level <0-100> [burst-rate <0-100>]

storm-control level <0-100> [burst-rate <0-100>]

Description: Configure Storm Control Level (bandwidth percentage) on the Interface

Syntax:

<0-100>

Rate of Bandwidth in Percentage

<0-100>

(Optional) Max Rate of Bandwidth in Percentage

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# storm-control level <0-100> [burst-rate <0-100>]

storm-control level <0-100> [burst-rate <0-100>]

Description: Configure Storm Control Level (bandwidth percentage) on the Interface

Syntax:

<0-100>

Rate of Bandwidth in Percentage

<0-100>

(Optional) Max Rate of Bandwidth in Percentage

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# storm-control level <0-100> [burst-rate <0-100>]

storm-control level <0-100> [burst-rate <0-100>]

Description: Configure Storm Control Level (bandwidth percentage) on the Interface

Syntax:

<0-100>

Rate of Bandwidth in Percentage

<0-100>

(Optional) Max Rate of Bandwidth in Percentage

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# storm-control level <0-100> [burst-rate <0-100>]

storm-control pps

storm-control pps <arg> burst-rate <arg>

Description: Configure Storm Control in packet per second on the Interface

Syntax:

arg

Burst Rate in packets per second. Number range from=0 to=4882812

burst-rate

Max Burst Rate in packets per second

arg

Max Burst Rate in packets per second. Number range from=0 to=4882812

Command Mode: template policy-group : Configure Policy Group Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# storm-control pps <> burst-rate <>

storm-control pps <arg> burst-rate <arg>

Description: Configure Storm Control in packet per second on the Interface

Syntax:

arg

Burst Rate in packets per second. Number range from=0 to=4882812

burst-rate

Max Burst Rate in packets per second

arg

Max Burst Rate in packets per second. Number range from=0 to=4882812

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# storm-control pps <> burst-rate <>

storm-control pps <arg> burst-rate <arg>

Description: Configure Storm Control in packet per second on the Interface

Syntax:

arg

Burst Rate in packets per second. Number range from=0 to=4882812

burst-rate

Max Burst Rate in packets per second

arg

Max Burst Rate in packets per second. Number range from=0 to=4882812

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# storm-control pps <> burst-rate <>

storm-control pps <arg> burst-rate <arg>

Description: Configure Storm Control in packet per second on the Interface

Syntax:

arg

Burst Rate in packets per second. Number range from=0 to=4882812

burst-rate

Max Burst Rate in packets per second

arg

Max Burst Rate in packets per second. Number range from=0 to=4882812

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# storm-control pps <> burst-rate <>

storm-control pps <arg> burst-rate <arg>

Description: Configure Storm Control in packet per second on the Interface

Syntax:

arg

Burst Rate in packets per second. Number range from=0 to=4882812

burst-rate

Max Burst Rate in packets per second

arg

Max Burst Rate in packets per second. Number range from=0 to=4882812

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# storm-control pps <> burst-rate <>

street-address

street-address <WORD>

Description: Street address of the site

Syntax:

WORD

The street address (Max Size 255) surrounded by quotes

Command Mode: destination-profile : Configure destination profile Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# destination-profile
(config-callhome-destnprof)# street-address <WORD>

subject

subject <WORD>

Description: Set The fully qualified domain name or DN of the requesting device.

Syntax:

<WORD>

FQDN or DN of device (Max Size 64)

Command Mode: csr : A csr mode to create and hold an SSL certificate

Command Path:

# configure [['terminal', 't']]
(config)# crypto keyring <WORD>
(config-keyring)# csr
(config-csr)# subject <WORD>

subject <WORD>

Description: Configuration a subject on the contract

Syntax:

WORD

Name of the contract subject (Max Size 64)

Command Mode: contract : Configure binary contracts between Application EPGs

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# contract <WORD> [type <type>]
(config-tenant-contract)# subject <WORD>

summary-address

summary-address <IP-PREFIX/LEN>

Description: Route summarization

Syntax:

IP-PREFIX/LEN

Summarized ip

Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router ospf default
(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-ospf-vrf)# summary-address <IP-PREFIX/LEN>

switch-group

switch-group <WORD>

Description: Create switch firmware upgrade policy

Syntax:

WORD

switch-group name (Max Size 64)

Command Mode: firmware : Firmware upgrade configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# switch-group <WORD>

switch

switch

Description: Add switches to switch group

Syntax:

arg

Command Mode: switch-group : Create switch firmware upgrade policy

Command Path:

# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# switch-group <WORD>
(config-firmware-switch)# switch

switch

Description: Configure Leaf Node

Syntax:

arg

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# switch

switch

Description: Add switches to zone

Syntax:

arg

Command Mode: zone : Create zone policy

Command Path:

# configure [['terminal', 't']]
(config)# zones
(config-zones)# zone <WORD>
(config-zone)# switch

switching

switching mode vlan|vxlan|vxlan-ns

Description: Configure switching mode.

Syntax:

mode

switching Mode

vlan

VLAN/SW Mode

vxlan

VXLAN/SW Mode

vxlan-ns

VXLAN/HW Mode

Command Mode: configure-avs : Configure a VMware Domain as AVS (N1K) type

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-avs
(config-vmware-avs)# switching mode vlan|vxlan|vxlan-ns

switchport

switchport vlan scope local

Description: L2 configuration

Syntax:

vlan

scope

local

Local Scope

Command Mode: template policy-group : Configure Policy Group Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# switchport vlan scope local

switchport vlan scope local

Description: L2 configuration

Syntax:

vlan

scope

local

Local Scope

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# switchport vlan scope local

switchport

Description: Configure switchport parameters

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# switchport

switchport

Description: Configure switchport parameters

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# switchport

switchport

Description: Configure switchport parameters

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# switchport

switchport access vlan tenant application

switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

Description: Application Name

Syntax:

vlan

Access Vlan

<1-4094>

Access Vlan. Number range from=1 to=4094

tenant

Tenant hosting the AEPg

WORD

Tenant hosting the AEPg (Max Size 63)

WORD

Application Name (Max Size 64)

epg

EPg that uses the statically enabled Encap

WORD

EPg that uses the statically enabled Encap (Max Size 64)

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

Description: Application Name

Syntax:

vlan

Access Vlan

<1-4094>

Access Vlan. Number range from=1 to=4094

tenant

Tenant hosting the AEPg

WORD

Tenant hosting the AEPg (Max Size 63)

WORD

Application Name (Max Size 64)

epg

EPg that uses the statically enabled Encap

WORD

EPg that uses the statically enabled Encap (Max Size 64)

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

Description: Application Name

Syntax:

vlan

Access Vlan

<1-4094>

Access Vlan. Number range from=1 to=4094

tenant

Tenant hosting the AEPg

WORD

Tenant hosting the AEPg (Max Size 63)

WORD

Application Name (Max Size 64)

epg

EPg that uses the statically enabled Encap

WORD

EPg that uses the statically enabled Encap (Max Size 64)

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# switchport access vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

switchport access vlan tenant external-svi

switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

Description: Associate SVI to the L2 Access Interface

Syntax:

vlan

Access Vlan

<1-4094>

Access Vlan. Number range from=1 to=4094

tenant

Tenant hosting the AEPg

WORD

Tenant hosting the AEPg (Max Size 63)

l3out

(Optional) Specify one or more l3extOut to add SVI interface

WORD

l3extOut Name

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

Description: Associate SVI to Acess L2 Interface

Syntax:

vlan

Access Vlan

<1-4094>

Access Vlan. Number range from=1 to=4094

tenant

Tenant hosting the AEPg

WORD

Tenant hosting the AEPg (Max Size 63)

l3out

(Optional) Specify one or more l3extOut to add SVI interface

WORD

l3extOut Name

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

Description: Associate SVI to Acess L2 Interface

Syntax:

vlan

Access Vlan

<1-4094>

Access Vlan. Number range from=1 to=4094

tenant

Tenant hosting the AEPg

WORD

Tenant hosting the AEPg (Max Size 63)

l3out

(Optional) Specify one or more l3extOut to add SVI interface

WORD

l3extOut Name

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# switchport access vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

switchport trunk allowed vlan inband-mgmt

switchport trunk allowed vlan <NUMBER> inband-mgmt <A.B.C.D/LEN>

Description: Configure External L2 connectivity to inband Mnaagement

Syntax:

vlan

Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

A.B.C.D/LEN

Gateway IP Address for External Connectivity format x.x.x.x/m

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# switchport trunk allowed vlan <NUMBER> inband-mgmt <A.B.C.D/LEN>

switchport trunk allowed vlan tenant application

switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD> [primary-vlan primary-vlan <evlan>]

Description: Add an AEPg as static encap

Syntax:

vlan

Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

WORD

Tenant hosting the EPg (Max Size 63)

WORD

Application Name (Max Size 64)

epg

EPg that uses the statically enabled Encap

WORD

EPg that uses the statically enabled Encap (Max Size 64)

primary-vlan <evlan>

(Optional) Vlan for egress traffic when EPG isolation is enforced

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD> [primary-vlan primary-vlan <evlan>]

switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

Description: Add an AEPg as static encap

Syntax:

vlan

Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

tenant

Tenant hosting the EPg

WORD

Tenant hosting the EPg (Max Size 63)

WORD

Application Name (Max Size 64)

epg

EPg that uses the statically enabled Encap

WORD

EPg that uses the statically enabled Encap (Max Size 64)

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

Description: Add an AEPg as static encap

Syntax:

vlan

Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

tenant

Tenant hosting the EPg

WORD

Tenant hosting the EPg (Max Size 63)

WORD

Application Name (Max Size 64)

epg

EPg that uses the statically enabled Encap

WORD

EPg that uses the statically enabled Encap (Max Size 64)

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

switchport trunk allowed vlan tenant external-l2

switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg <WORD>

Description: Add a L2 external EPG on the interface

Syntax:

vlan

Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

WORD

Tenant hosting the EPg (Max Size 63)

epg

L2 external EPG name

WORD

L2 external EPG name (Max Size 64)

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg <WORD>

switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg <WORD>

Description: Add a L2 external EPG on the interface

Syntax:

vlan

Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

tenant

Tenant hosting the EPg

WORD

Tenant hosting the EPg (Max Size 63)

epg

L2 external EPG name

WORD

L2 external EPG name (Max Size 64)

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg <WORD>

switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg <WORD>

Description: Add a L2 external EPG on the interface

Syntax:

vlan

Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

tenant

Tenant hosting the EPg

WORD

Tenant hosting the EPg (Max Size 63)

epg

L2 external EPG name

WORD

L2 external EPG name (Max Size 64)

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-l2 epg <WORD>

switchport trunk allowed vlan tenant external-svi

switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

Description: Associate SVI to the L2 Interface

Syntax:

vlan

Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

WORD

Tenant hosting the EPg (Max Size 63)

l3out

(Optional) Specify one or more l3extOut to add SVI interface

WORD

l3extOut Name

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

Description: Associate SVI to the L2 Interface

Syntax:

vlan

Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

tenant

Tenant hosting the EPg

WORD

Tenant hosting the EPg (Max Size 63)

l3out

(Optional) Specify one or more l3extOut to add SVI interface

WORD

l3extOut Name

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

Description: Associate SVI to the L2 Interface

Syntax:

vlan

Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

tenant

Tenant hosting the EPg

WORD

Tenant hosting the EPg (Max Size 63)

l3out

(Optional) Specify one or more l3extOut to add SVI interface

WORD

l3extOut Name

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

switchport trunk allowed vlan tenant legacy-forwarding

switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding

Description: Add legacy forwarding on the vlan supplied

Syntax:

vlan

Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

WORD

Tenant hosting the EPg (Max Size 63)

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding

switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding

Description: Add legacy forwarding on the vlan supplied

Syntax:

vlan

Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

tenant

Tenant hosting the EPg

WORD

Tenant hosting the EPg (Max Size 63)

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding

switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding

Description: Add legacy forwarding on the vlan supplied

Syntax:

vlan

Encapsulation Vlan

<1-4094>

Encapsulation Vlan. Number range from=1 to=4094

tenant

Tenant hosting the EPg

WORD

Tenant hosting the EPg (Max Size 63)

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# switchport trunk allowed vlan <NUMBER> tenant <WORD> legacy-forwarding

switchport trunk native vlan tenant application

switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

Description: Application hosting the AEPg

Syntax:

vlan

Native Vlan

<1-4094>

Native Vlan. Number range from=1 to=4094

tenant

Tenant hosting the AEPg

WORD

Tenant hosting the AEPg (Max Size 63)

WORD

Application Name (Max Size 64)

epg

EPg that uses the statically enabled Encap

WORD

EPg that uses the statically enabled Encap (Max Size 64)

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

Description: Application hosting the AEPg

Syntax:

vlan

Native Vlan

<1-4094>

Native Vlan. Number range from=1 to=4094

tenant

Tenant hosting the AEPg

WORD

Tenant hosting the AEPg (Max Size 63)

WORD

Application Name (Max Size 64)

epg

EPg that uses the statically enabled Encap

WORD

EPg that uses the statically enabled Encap (Max Size 64)

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

Description: Application hosting the AEPg

Syntax:

vlan

Native Vlan

<1-4094>

Native Vlan. Number range from=1 to=4094

tenant

Tenant hosting the AEPg

WORD

Tenant hosting the AEPg (Max Size 63)

WORD

Application Name (Max Size 64)

epg

EPg that uses the statically enabled Encap

WORD

EPg that uses the statically enabled Encap (Max Size 64)

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# switchport trunk native vlan <NUMBER> tenant <WORD> application <WORD> epg <WORD>

switchport trunk native vlan tenant external-svi

switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

Description: Associate SVI to the L2 Trunk Interface

Syntax:

vlan

Native Vlan

<1-4094>

Native Vlan. Number range from=1 to=4094

tenant

Tenant hosting the AEPg

WORD

Tenant hosting the AEPg (Max Size 63)

l3out

(Optional) Specify one or more l3extOut to add SVI interface

WORD

l3extOut Name

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

Description: Associate Native Vlan to the L2 Trunk Interface as external SVI

Syntax:

vlan

Native Vlan

<1-4094>

Native Vlan. Number range from=1 to=4094

tenant

Tenant hosting the AEPg

WORD

Tenant hosting the AEPg (Max Size 63)

l3out

(Optional) Specify one or more l3extOut to add SVI interface

WORD

l3extOut Name

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

Description: Associate SVI to Trunk L2 Interface

Syntax:

vlan

Native Vlan

<1-4094>

Native Vlan. Number range from=1 to=4094

tenant

Tenant hosting the AEPg

WORD

Tenant hosting the AEPg (Max Size 63)

l3out

(Optional) Specify one or more l3extOut to add SVI interface

WORD

l3extOut Name

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# switchport trunk native vlan <NUMBER> tenant <WORD> external-svi [l3out] WORD

switchport vlan

switchport vlan scope local

Description: L2 configuration

Syntax:

scope

local

Local Scope

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# switchport vlan scope local

switchport vlan scope local

Description:

Syntax:

scope

local

Local Scope

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# switchport vlan scope local

switchport vlan scope local

Description:

Syntax:

scope

local

Local Scope

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# switchport vlan scope local

syslog

syslog common

Description: Syslog common policy configuration mode

Syntax:

common

Syslog common policy configuration mode

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# syslog common

system cluster-size

system cluster-size <NUMBER>

Description: Set APIC cluster size

Syntax:

<size>

size of the cluster to be set. Number range from=1 to=16

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# system cluster-size <NUMBER>

system controller-id

system controller-id <serial-number> approve|reject

Description: Configure Controller Id for controllers in fabric

Syntax:

serial-number

Controller serial number

approve

Approve controller

reject

Reject controller

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# system controller-id <serial-number> approve|reject

system dynamic-load-balance

system dynamic-load-balance mode link-failure-resiliency|dynamic-aggressive|dynamic-conservative|packet-prioritization

Description: Configure dynamic load balancer

Syntax:

mode

Dynamic load balancer mode

link-failure-resiliency

Link failure resiliency mode

dynamic-aggressive

Aggressive dynamic mode

dynamic-conservative

Conservative dynamic mode

packet-prioritization

Packet prioritization mode

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# system dynamic-load-balance mode link-failure-resiliency|dynamic-aggressive|dynamic-conservative|packet-prioritization

system fabric-security-mode

system fabric-security-mode <mode>

Description: Set strict/permissive mode for ACI Fabric Internode Authentication

Syntax:

<mode>

Security mode as comma separated values like val1,val2,..valN

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# system fabric-security-mode <mode>

system jumbomtu

system jumbomtu <NUMBER>

Description: MTU size for Host Facing ports

Syntax:

<576-9000>

Enter jumbomtu. Number range from=576 to=9000

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# system jumbomtu <NUMBER>

system switch-id

system switch-id <serial-number> <node-Id> <name>

Description: Configure Node Id for switches in fabric

Syntax:

serial-number

Switch serial number

node-Id

Switch ID. Number range from=101 to=4000

name

Switch name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# system switch-id <serial-number> <node-Id> <name>

Chapter 19. T Commands

- tacacs-server host

- tacacs-server retries

- tacacs-server timeout

- tag

- target

- telnet

- template bfd

- template bgp address-family

- template bgp timers

- template community-list expanded

- template community-list standard

- template dhcp option

- template dhcp relay

- template eigrp interface-policy

- template eigrp vrf-policy

- template endpoint retention policy

- template extcommunity-list expanded

- template extcommunity-list standard

- template ip igmp snooping policy

- template ipv6 nd policy

- template ipv6 nd prefix

- template leaf-policy-group

- template ospf interface-policy

- template ospf vrf-policy

- template policy-group

- template port-channel

- template route-profile

- template route tag

- tenant

- terminal

- time

- time start daily

- time start weekly

- timeout

- timers

- timers lsa-arrival

- timers lsa-group-pacing

- timers throttle lsa

- timers throttle spf

- tp

- transmit-delay

- transport email from

- transport email mail-server

- transport email reply-to

- trigger fabric-recovery

- trigger shutdown

- trigger snapshot download

- trigger snapshot export

- trigger snapshot import

- trigger snapshot rollback

- trigger snapshot upload

- trigger techsupport all

- trigger techsupport controllers

- trigger techsupport host

- trigger techsupport local

- trigger techsupport switch

- trigger troubleshoot epext session report

- trigger troubleshoot eptoep session report

- trigger vmware

- troubleshoot epext session atomiccounter

- troubleshoot epext session description

- troubleshoot epext session latestminutes

- troubleshoot epext session monitor destination apic

- troubleshoot epext session monitor destination prefdestgroup

- troubleshoot epext session monitor destination tenant

- troubleshoot epext session scheduler

- troubleshoot epext session srcextip destip tenant application

- troubleshoot epext session srcextip destip tenant vrf

- troubleshoot epext session srcip tenant application epg destextip

- troubleshoot epext session srcip tenant vrf destextip

- troubleshoot epext session starttime

- troubleshoot epext session traceroute

- troubleshoot epext session traceroute protocol icmp

- troubleshoot epext session traceroute protocol tcp

- troubleshoot epext session traceroute protocol udp

- troubleshoot eptoep session atomiccounter

- troubleshoot eptoep session description

- troubleshoot eptoep session latestminutes

- troubleshoot eptoep session monitor destination apic

- troubleshoot eptoep session monitor destination prefdestgroup

- troubleshoot eptoep session monitor destination tenant

- troubleshoot eptoep session scheduler

- troubleshoot eptoep session srcip tenant application epg destip tenant application

- troubleshoot eptoep session srcip tenant application epg destip tenant vrf

- troubleshoot eptoep session srcip tenant vrf destip tenant application

- troubleshoot eptoep session srcip tenant vrf destip tenant vrf

- troubleshoot eptoep session srcmac tenant application epg destmac tenant application

- troubleshoot eptoep session srcmac tenant application epg destmac tenant vrf

- troubleshoot eptoep session srcmac tenant vrf destmac tenant application

- troubleshoot eptoep session srcmac tenant vrf destmac tenant vrf

- troubleshoot eptoep session starttime

- troubleshoot eptoep session traceroute

- troubleshoot eptoep session traceroute protocol icmp

- troubleshoot eptoep session traceroute protocol tcp

- troubleshoot eptoep session traceroute protocol udp

- trusted-key

tacacs-server host

tacacs-server host <A.B.C.D|A:B::C:D|WORD>

Description: TACACS+ server's DNS name or its IP address

Syntax:

A.B.C.D|A:B::C:D|WORD

TACACS+ server's DNS name or its IP address

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# tacacs-server host <A.B.C.D|A:B::C:D|WORD>

tacacs-server retries

tacacs-server retries <NUMBER>

Description: Global TACACS+ server retries period in seconds

Syntax:

<0-5>

Global TACACS+ server retries period in seconds. Number range from=0 to=5

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# tacacs-server retries <NUMBER>

tacacs-server timeout

tacacs-server timeout <NUMBER>

Description: Global TACACS+ server timeout period in seconds

Syntax:

<1-60>

Global TACACS+ server timeout period in seconds. Number range from=1 to=60

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# tacacs-server timeout <NUMBER>

tag

tag <WORD>

Description: Add a tag to an epg

Syntax:

WORD

Tag for the object (Max Size 64)

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# tag <WORD>

tag <WORD>

Description: Add a tag to an application

Syntax:

WORD

Tag for the object (Max Size 64)

Command Mode: application : application configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# tag <WORD>

tag <WORD>

Description: Add a tag to the tenant

Syntax:

WORD

Tag for the object (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# tag <WORD>

tag <NUMBER>

Description: Set Route Tag

Syntax:

<0-4294967295>

Route Tag Value. Number range from=0 to=4294967295

Command Mode: template route tag : Configure Route Tag Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route tag <WORD> tenant <WORD>
(config-route-tag)# tag <NUMBER>

target

target self|children|subtree

Description: Configure target dn/class

Syntax:

self

Self

children

Children

subtree

Subtree

Command Mode: query : Configure Query profile Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# query-profile
(config-callhome-queryprof)# query <WORD> type dn|class <dn/classname>
(config-callhome-queryprof-query)# target self|children|subtree

target <WORD>

Description: Snapshot target

Syntax:

WORD

infra, fabric or tenant-x

Command Mode: snapshot export : Configuration export setup mode

Command Path:

# configure [['terminal', 't']]
(config)# snapshot export <WORD>
(config-export)# target <WORD>

telnet

telnet

Description: TELNET communication policy group

Command Mode: comm-policy : Configure any communication policy, ssh/telnet/shellinabox/http/https

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# telnet

template bfd

template bfd ip|ipv6 <WORD>

Description: BFD group of commands

Syntax:

ip

IPV4 Address

ipv6

IPV6 Address

WORD

Create a BFD policy

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# template bfd ip|ipv6 <WORD>

template bfd <WORD> tenant <WORD>

Description: Configure BFD Interface Policy Templates

Syntax:

WORD

BFD Interface Policy name (Max Size 64)

tenant

Tenant for the BFD Policy

WORD

Tenant name (Max Size 63)

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template bfd <WORD> tenant <WORD>

template bgp address-family

template bgp address-family <WORD> tenant <WORD>

Description: Configure Router BGP Address Family Templates

Syntax:

WORD

BGP Address Family Policy Name (Max Size 64)

tenant

Tenant for the BGP Policy

WORD

Tenant Name

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template bgp address-family <WORD> tenant <WORD>

template bgp timers

template bgp timers <WORD> tenant <WORD>

Description: Configure Router BGP Timer Policy Templates

Syntax:

WORD

Router BGP Timer Policy Name (Max Size 64)

tenant

Tenant for the BGP Policy

WORD

Tenant Name (Max Size 63)

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template bgp timers <WORD> tenant <WORD>

template community-list expanded

template community-list expanded <WORD> <regular expression> tenant <WORD>

Description: Configure expanded community list templates

Syntax:

WORD

community name (Max Size 64)

<regular expression>

community regular expression

tenant

Tenant for the VRF

WORD

Tenant name

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template community-list expanded <WORD> <regular expression> tenant <WORD>

template community-list standard

template community-list standard <WORD> <community list> tenant <WORD>

Description: Configure standard community list templates

Syntax:

WORD

community name (Max Size 64)

<community list>

<community list>

tenant

Tenant for the VRF

WORD

Tenant name

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template community-list standard <WORD> <community list> tenant <WORD>

template dhcp option

template dhcp option policy <WORD>

Description: Create a DHCP Option policy

Syntax:

policy

Name of the DHCP Option Policy

WORD

Name of the DHCP Option Policy (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template dhcp option policy <WORD>

template dhcp relay

template dhcp relay policy <WORD>

Description: Create a DHCP Relay policy

Syntax:

policy

Name of the DHCP relay policy

WORD

Name of the DHCP relay policy (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# template dhcp relay policy <WORD>

template dhcp relay policy <WORD>

Description: Create a DHCP Relay policy

Syntax:

policy

Name of the DHCP relay policy

WORD

Name of the DHCP relay policy (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template dhcp relay policy <WORD>

template eigrp interface-policy

template eigrp interface-policy <WORD> tenant <WORD>

Description: Configure EIGRP Interface policy templates

Syntax:

WORD

Policy name (Max Size 64)

tenant

Tenant for the EIGRP Interface Policy

WORD

Tenant name

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template eigrp interface-policy <WORD> tenant <WORD>

template eigrp vrf-policy

template eigrp vrf-policy <WORD> tenant <WORD>

Description: Configure EIGRP VRF policy templates

Syntax:

WORD

Policy name (Max Size 64)

tenant

Tenant for the EIGRP VRF Policy

WORD

Tenant name

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template eigrp vrf-policy <WORD> tenant <WORD>

template endpoint retention policy

template endpoint retention policy <WORD>

Description: Configure an endpoint retention policy

Syntax:

WORD

Name of the endpoint retention policy to set (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template endpoint retention policy <WORD>

template extcommunity-list expanded

template extcommunity-list expanded <WORD> <regular expression> tenant <WORD>

Description: Configure expanded community list templates

Syntax:

WORD

community name (Max Size 64)

<regular expression>

community regular expression

tenant

Tenant for the VRF

WORD

Tenant name

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template extcommunity-list expanded <WORD> <regular expression> tenant <WORD>

template extcommunity-list standard

template extcommunity-list standard <WORD> [scope <scope>] <community list> tenant <WORD>

Description: Configure standard community list templates

Syntax:

WORD

community name (Max Size 64)

scope

(Optional) transitive or non-transitive

<community list>

<community list>

tenant

Tenant for the VRF

WORD

Tenant name

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template extcommunity-list standard <WORD> [scope <scope>] <community list> tenant <WORD>

template ip igmp snooping policy

template ip igmp snooping policy <WORD>

Description: Create an IGMP snooping policy

Syntax:

WORD

Name of the IGMP snooping policy to define (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ip igmp snooping policy <WORD>

template ipv6 nd policy

template ipv6 nd policy <WORD>

Description: Create/modify an an IPv6 Neighbor Discovery policy

Syntax:

WORD

Name of the policy to create/modify (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ipv6 nd policy <WORD>

template ipv6 nd policy <WORD> tenant <WORD>

Description: Configure IPv6 Neighbor Discovery policy templates

Syntax:

WORD

Policy name (Max Size 64)

tenant

Tenant for the ND Policy

WORD

Tenant name

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ipv6 nd policy <WORD> tenant <WORD>

template ipv6 nd prefix

template ipv6 nd prefix policy <WORD>

Description: Create/modify an an IPv6 Neighbor Prefix policy

Syntax:

policy

IPv6 ND Prefix Policy

WORD

Name of the policy to create/modify (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# template ipv6 nd prefix policy <WORD>

template leaf-policy-group

template leaf-policy-group <WORD>

Description: Configure Leaf Policy Group

Syntax:

WORD

Leaf Policy Group Name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# template leaf-policy-group <WORD>

template ospf interface-policy

template ospf interface-policy <WORD> tenant <WORD>

Description: Configure OSPF Interface Policy Templates

Syntax:

WORD

OSPF Interface Policy name (Max Size 64)

tenant

Tenant for the OSPF Policy

WORD

Tenant name (Max Size 63)

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf interface-policy <WORD> tenant <WORD>

template ospf vrf-policy

template ospf vrf-policy <WORD> tenant <WORD>

Description: Configure Router OSPF Timer Policy Templates

Syntax:

WORD

Router OSPF Timer Policy name (Max Size 64)

tenant

Tenant for the OSPF Policy

WORD

Tenant name (Max Size 63)

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf vrf-policy <WORD> tenant <WORD>

template policy-group

template policy-group <WORD>

Description: Configure Policy Group Parameters

Syntax:

WORD

Interface Policy Group Name (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>

template port-channel

template port-channel <WORD>

Description: Configure Port-Channel Parameters

Syntax:

WORD

Port-Channel/VPC Name (Max Size 64)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>

template route-profile

template route-profile <WORD> tenant <WORD>

Description: Configure route-profile template under tenant for BGP dampening and route redistribution

Syntax:

WORD

Route-profile template name (Max Size 64)

tenant

Tenant for the route-profile template

WORD

Tenant Name (Max Size 63)

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route-profile <WORD> tenant <WORD>

template route-profile <WORD>

Description: Configure route-profile template under VRF/L3Out for bridge-domain export

Syntax:

WORD

Route-profile template name

Command Mode: vrf : Configure VRF parameters

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
(config-leaf-vrf)# template route-profile <WORD>

template route tag

template route tag <WORD> tenant <WORD>

Description: Configure Route Tag Policy Templates

Syntax:

WORD

Route Tag Policy Name (Max Size 64)

tenant

Tenant for the Route Tag Policy

WORD

Tenant Name (Max Size 63)

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template route tag <WORD> tenant <WORD>

tenant

tenant <WORD>

Description: tenant configuration mode

Syntax:

WORD

tenant name (Max Size 63)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>

terminal

terminal length <NUMBER>

Description: Enable or disable pager for command output

Syntax:

length

Terminal length keyword

NUMBER

Terminal pager length (0=Disable pager). Number range from=0 to=511

Command Mode: exec : Exec Mode

Command Path:

# terminal length <NUMBER>

time

time start <date-time>

Description: Start controller-group upgrade

Syntax:

start

Set time to trigger upgrade

<date-time>

Set the start time ([[[yyyy:]mmm:]dd:]HH:MM)

Command Mode: controller-group : Controller Upgrade Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# firmware
(config-firmware)# controller-group
(config-firmware-controller)# time start <date-time>

time start <TIME>

Description: Set the window start time

Syntax:

start

Set the start time

TIME

Set the start time [[[yyyy:]mmm:]dd:]HH:MM

Command Mode: absolute : Absolute window configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# scheduler fabric|controller schedule <WORD>
(config-scheduler)# absolute window <WORD>
(config-scheduler-absolute)# time start <TIME>

time start daily

time start daily <TIME>

Description: Specify a daily schedule

Syntax:

TIME

Trigger time in HH:MM format

Command Mode: recurring : Recurring window configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# scheduler fabric|controller schedule <WORD>
(config-scheduler)# recurring window <WORD>
(config-scheduler-recurring)# time start daily <TIME>

time start weekly

time start weekly monday|tuesday|wednesday|thursday|friday|saturday|sunday|even-day|odd-day|every-day <TIME>

Description: Specify a weekly schedule

Syntax:

monday

Mondays

tuesday

Tuesdays

wednesday

Wednesdays

thursday

Thursdays

friday

Fridays

saturday

Saturdays

sunday

Sundays

even-day

Even days

odd-day

Odd days

every-day

Everyday

TIME

Trigger time in HH:MM format

Command Mode: recurring : Recurring window configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# scheduler fabric|controller schedule <WORD>
(config-scheduler)# recurring window <WORD>
(config-scheduler-recurring)# time start weekly monday|tuesday|wednesday|thursday|friday|saturday|sunday|even-day|odd-day|every-day <TIME>

timeout

timeout <NUMBER>

Description: LDAP server timeout for authentication

Syntax:

<5-60>

LDAP server timeout for authentication. Number range from=5 to=60

Command Mode: ldap-server host : LDAP server DNS name or IP address

Command Path:

# configure [['terminal', 't']]
(config)# ldap-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# timeout <NUMBER>

timeout <0-60>

Description: RADIUS server timeout for authentication

Syntax:

<0-60>

RADIUS server timeout for authentication

Command Mode: radius-server host : RADIUS server's DNS name or its IP address

Command Path:

# configure [['terminal', 't']]
(config)# radius-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# timeout <0-60>

timeout <NUMBER>

Description: TACACS server timeout for authentication

Syntax:

<0-60>

TACACS server timeout for authentication. Number range from=0 to=60

Command Mode: tacacs-server host : TACACS+ server's DNS name or its IP address

Command Path:

# configure [['terminal', 't']]
(config)# tacacs-server host <A.B.C.D|A:B::C:D|WORD>
(config-host)# timeout <NUMBER>

timers

timers bgp <NUMBER> <NUMBER>

Description: Set BGP Policy Timers

Syntax:

bgp

Set BGP Policy Timers

<0-3600>

Keep-Alive Timer Value in Seconds. Number range from=0 to=3600

<0-3600>

Hold Timer Value in Seconds. Number range from=0 to=3600

Command Mode: template bgp timers : Configure Router BGP Timer Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template bgp timers <WORD> tenant <WORD>
(config-bgp-timers)# timers bgp <NUMBER> <NUMBER>

timers active-time <NUMBER>

Description: Set EIGRP Timers

Syntax:

active-time

Active timer interval

<1-65535>

Active timer interval value in minutes. Number range from=1 to=65535

Command Mode: template eigrp vrf-policy : Configure EIGRP VRF policy templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template eigrp vrf-policy <WORD> tenant <WORD>
(config-template-eigrp-vrf-pol)# timers active-time <NUMBER>

timers active-time <NUMBER>

Description: Set EIGRP Timers

Syntax:

active-time

Active timer interval

<1-65535>

Active timer interval value in minutes. Number range from=1 to=65535

Command Mode: address-family : EIGRP Policy Address Family

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router eigrp default
(config-eigrp)# vrf member tenant <WORD> vrf <WORD>
(config-eigrp-vrf)# address-family ipv4|ipv6 unicast
(config-address-family)# timers active-time <NUMBER>

timers lsa-arrival

timers lsa-arrival <NUMBER>

Description: Set the minimum interval between the arrival of each link-state advertisement(LSA)

Syntax:

<10-600000>

Interval in milliseconds. Number range from=10 to=600000

Command Mode: template ospf vrf-policy : Configure Router OSPF Timer Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf vrf-policy <WORD> tenant <WORD>
(config-vrf-policy)# timers lsa-arrival <NUMBER>

timers lsa-group-pacing

timers lsa-group-pacing <NUMBER>

Description: Set the interval in which LSAs are grouped and refreshed, checksummed, or aged

Syntax:

<1-1800>

Interval in seconds. Number range from=1 to=1800

Command Mode: template ospf vrf-policy : Configure Router OSPF Timer Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf vrf-policy <WORD> tenant <WORD>
(config-vrf-policy)# timers lsa-group-pacing <NUMBER>

timers throttle lsa

timers throttle lsa <NUMBER> <NUMBER> <NUMBER>

Description: Set the start-interval, hold-interval, max-interval for LSA

Syntax:

<start-time 0-5000>

The generation throttle start-wait interval between LSAs.. Number range from=0 to=5000

<hold-interval 50-30000>

The incremental time (in milliseconds) used to calculate the subsequent rate limiting times for LSA generation.. Number range from=50 to=30000

<max-time 50-30000>

The generation throttle maximum interval between LSAs.. Number range from=50 to=30000

Command Mode: template ospf vrf-policy : Configure Router OSPF Timer Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf vrf-policy <WORD> tenant <WORD>
(config-vrf-policy)# timers throttle lsa <NUMBER> <NUMBER> <NUMBER>

timers throttle spf

timers throttle spf <NUMBER> <NUMBER> <NUMBER>

Description: Set the SPF init-interval, hold-interval, max-interval for LSA

Syntax:

<spf-start 1-600000>

The initial delay interval for the SPF schedule.. Number range from=1 to=600000

<spf-hold 1-600000>

The minimum hold time between SPF calculations.. Number range from=1 to=600000

<spf-max-wait 1-600000>

The maximum interval between SPF calculations. Each interval after the initial calculation is twice as long as the previous one until the wait interval reaches the maximum wait time specified.. Number range from=1 to=600000

Command Mode: template ospf vrf-policy : Configure Router OSPF Timer Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf vrf-policy <WORD> tenant <WORD>
(config-vrf-policy)# timers throttle spf <NUMBER> <NUMBER> <NUMBER>

tp

tp <WORD>

Description: Set third-party certificate from trusted source/point for device identity

Syntax:

<WORD>

third-party certificate (Max Size 16)

Command Mode: crypto keyring : A keyring mode to create and hold an SSL certificate

Command Path:

# configure [['terminal', 't']]
(config)# crypto keyring <WORD>
(config-keyring)# tp <WORD>

transmit-delay

transmit-delay <NUMBER>

Description: Set the delay time needed to send an LSA update packet.

Syntax:

<1-450>

Delay in seconds. Number range from=1 to=450

Command Mode: template ospf interface-policy : Configure OSPF Interface Policy Templates

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# template ospf interface-policy <WORD> tenant <WORD>
(config-interface-policy)# transmit-delay <NUMBER>

transport email from

transport email from <WORD>

Description: The contact e-mail address

Syntax:

WORD

The e-mail address (Max Size None)

Command Mode: destination-profile : Configure destination profile Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# destination-profile
(config-callhome-destnprof)# transport email from <WORD>

transport email mail-server

transport email mail-server <host/ipaddr> [port <port>] [mgmtepg <mgmtepg>]

Description: configure SMTP server

Syntax:

<host/ipaddr>

The hostname or ipaddress of the destination

port

(Optional) Port Number. Number range from=1 to=633535

mgmtepg

(Optional) mgmtepg

Command Mode: destination-profile : Configure destination profile Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# destination-profile
(config-callhome-destnprof)# transport email mail-server <host/ipaddr> [port <port>] [mgmtepg <mgmtepg>]

transport email reply-to

transport email reply-to <WORD>

Description: The contact e-mail address

Syntax:

WORD

Reply-To e-mail address (Max Size None)

Command Mode: destination-profile : Configure destination profile Parameters

Command Path:

# configure [['terminal', 't']]
(config)# callhome common
(config-callhome)# destination-profile
(config-callhome-destnprof)# transport email reply-to <WORD>

trigger fabric-recovery

trigger fabric-recovery <NUMBER> <WORD>

Description: Trigger fabric recovery

Syntax:

<cluster-size>

Size of the cluster. Number range from=1 to=16

WORD

Snapshot import configuration name

Command Mode: exec : Exec Mode

Command Path:

# trigger fabric-recovery <NUMBER> <WORD>

trigger shutdown

trigger shutdown controller <NUMBER>

Description: Shutdown controller

Syntax:

controller

Shutdown controller

<1-32>

Controller id. Number range from=1 to=32

Command Mode: exec : Exec Mode

Command Path:

# trigger shutdown controller <NUMBER>

trigger snapshot download

trigger snapshot download <WORD>

Description: Trigger command for snapshot download

Syntax:

WORD

Snapshot download configuration name

Command Mode: exec : Exec Mode

Command Path:

# trigger snapshot download <WORD>

trigger snapshot export

trigger snapshot export <WORD>

Description: Trigger command for snapshot export

Syntax:

WORD

Snapshot export configuration name

Command Mode: exec : Exec Mode

Command Path:

# trigger snapshot export <WORD>

trigger snapshot import

trigger snapshot import <WORD>

Description: Trigger command for snapshot import

Syntax:

WORD

Snapshot import configuration name

Command Mode: exec : Exec Mode

Command Path:

# trigger snapshot import <WORD>

trigger snapshot rollback

trigger snapshot rollback <WORD>

Description: Trigger command for snapshot rollback

Syntax:

WORD

Snapshot rollback configuration name

Command Mode: exec : Exec Mode

Command Path:

# trigger snapshot rollback <WORD>

trigger snapshot upload

trigger snapshot upload <WORD>

Description: Trigger command for snapshot upload

Syntax:

WORD

Snapshot upload configuration name

Command Mode: exec : Exec Mode

Command Path:

# trigger snapshot upload <WORD>

trigger techsupport all

trigger techsupport all [remotename <remote-path>]

Description: Trigger techsupport for controllers and switches

Syntax:

remote-path

(Optional) remote-path

Command Mode: exec : Exec Mode

Command Path:

# trigger techsupport all [remotename <remote-path>]

trigger techsupport controllers

trigger techsupport controllers [remotename <remote-path>]

Description: Trigger techsupport for a controllers

Syntax:

remote-path

(Optional) remote-path

Command Mode: exec : Exec Mode

Command Path:

# trigger techsupport controllers [remotename <remote-path>]

trigger techsupport host

trigger techsupport host <NUMBER> remotename <remote-file-name> [node <leaf-node-id>]

Description: Trigger techsupport for a host

Syntax:

<Odevid>

Specify the host Odev ID. Number range from=0 to=9223372036854775807

remotename

Specify the file remote path name

<remote-file-name>

Remote path file name

<leaf-node-id>

(Optional) Specify the leaf node id

Command Mode: exec : Exec Mode

Command Path:

# trigger techsupport host <NUMBER> remotename <remote-file-name> [node <leaf-node-id>]

trigger techsupport local

trigger techsupport local

Description: Trigger techsupport for a local

Command Mode: exec : Exec Mode

Command Path:

# trigger techsupport local

trigger techsupport switch

trigger techsupport switch switchId <switchId> [remotename <remote-path>]

Description: Trigger techsupport for a switch

Syntax:

switchId <switchId>

switch id 101-4000 or range(s): 101-103,104

remote-path

(Optional) remote-path

Command Mode: exec : Exec Mode

Command Path:

# trigger techsupport switch switchId <switchId> [remotename <remote-path>]

trigger troubleshoot epext session report

trigger troubleshoot epext session <session_name> report [format <format>]

Description: Trigger a report generation for a troubleshoot session

Syntax:

session

session

session_name

Session name

format

(Optional) Report format

Command Mode: exec : Exec Mode

Command Path:

# trigger troubleshoot epext session <session_name> report [format <format>]

trigger troubleshoot eptoep session report

trigger troubleshoot eptoep session <session_name> report [format <format>]

Description: Trigger a report generation for a troubleshoot session

Syntax:

session

session

session_name

Session name

format

(Optional) Report format

Command Mode: exec : Exec Mode

Command Path:

# trigger troubleshoot eptoep session <session_name> report [format <format>]

trigger vmware

trigger vmware domain <name> vcenter <hostname|IP> pull-inventory

Description: Trigger VMware vCenter inventory pull

Syntax:

domain

VMware domain

<name>

VMM VMware Domain name

vcenter

VMware vCenter

<hostname|IP>

vCenter hostname or IP

pull-inventory

Pull inventory

Command Mode: exec : Exec Mode

Command Path:

# trigger vmware domain <name> vcenter <hostname|IP> pull-inventory

troubleshoot epext session atomiccounter

troubleshoot epext session <session_name> atomiccounter

Description: Start atomic counter of a troubleshoot session

Syntax:

session

session

session_name

session name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot epext session <session_name> atomiccounter

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot epext session description

troubleshoot epext session <session_name> description <LINE>

Description: Set the description of a troubleshoot session

Syntax:

session

session

session_name

session name

LINE

Session description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot epext session <session_name> description <LINE>

troubleshoot epext session latestminutes

troubleshoot epext session <session_name> latestminutes <minutes>

Description: Set the time window in number of minutes from current time

Syntax:

session

session

session_name

session name

minutes

number of minutes from current time. Number range from=5 to=1440

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot epext session <session_name> latestminutes <minutes>

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot epext session monitor destination apic

troubleshoot epext session <session_name> monitor destination apic srcipprefix <sip/m> [analyser <aip>] [erspan-id <id>] [spansrcports <pathep-list>]

Description: Configure this APIC as monitor destination

Syntax:

session

session

session_name

session name

destination

destinaton

srcipprefix

srcipprefix

sip/m

Source IP adddress and subnet mask length

aip

(Optional) IP address of the host analyser

id

(Optional) erspan Id. Number range from=1 to=1023

pathep-list

(Optional) List of source fabricPathEp dn

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot epext session <session_name> monitor destination apic srcipprefix <sip/m> [analyser <aip>] [erspan-id <id>] [spansrcports <pathep-list>]

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot epext session monitor destination prefdestgroup

troubleshoot epext session <session_name> monitor destination prefdestgroup <destgroup_name> [spansrcports <pathep-list>]

Description: Configure a predefined monitor destination

Syntax:

session

session

session_name

session name

destination

destinaton

destgroup_name

Destination group name

pathep-list

(Optional) List of source fabricPathEp dn

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot epext session <session_name> monitor destination prefdestgroup <destgroup_name> [spansrcports <pathep-list>]

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot epext session monitor destination tenant

troubleshoot epext session <session_name> monitor destination tenant <tn_name> application <ap_name> epg <epg_name> destip <dip> srcipprefix <sip/m> [erspan-id <id>] [spansrcports <pathep-list>]

Description: Configure tenant EPG as monitor destination

Syntax:

session

session

session_name

session name

destination

destinaton

tn_name

tenant name

application

application

ap_name

application name

epg

epg

epg_name

epg name

destip

destip

dip

destination IP address

srcipprefix

srcipprefix

sip/m

source IP address and subnet mask length

id

(Optional) erspan Id. Number range from=1 to=1023

pathep-list

(Optional) List of source fabricPathEp dn

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot epext session <session_name> monitor destination tenant <tn_name> application <ap_name> epg <epg_name> destip <dip> srcipprefix <sip/m> [erspan-id <id>] [spansrcports <pathep-list>]

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot epext session scheduler

troubleshoot epext session <session_name> scheduler <sch_name> [format <format>]

Description: Associate a scheduler to the troubleshoot session

Syntax:

session

session

session_name

session name

sch_name

scheduler name

format

(Optional) Reoport format

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot epext session <session_name> scheduler <sch_name> [format <format>]

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot epext session srcextip destip tenant application

troubleshoot epext session <session_name> srcextip <sip> destip <dip> tenant <dtenant_name> application <dapp_name> epg <depg_name>

Description: application

Syntax:

session

session

session_name

session name

sip

external source IP

destip

destip

dip

destination IP

tenant

tenant

dtenant_name

destination Tenant

dapp_name

destination Application

epg

epg

depg_name

destination EPG

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot epext session <session_name> srcextip <sip> destip <dip> tenant <dtenant_name> application <dapp_name> epg <depg_name>

troubleshoot epext session srcextip destip tenant vrf

troubleshoot epext session <session_name> srcextip <sip> destip <dip> tenant <dtenant_name> vrf <dvrf_name>

Description: vrf

Syntax:

session

session

session_name

session name

sip

external source IP

destip

destip

dip

destination IP

tenant

tenant

dtenant_name

destination Tenant

dvrf_name

destination VRF

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot epext session <session_name> srcextip <sip> destip <dip> tenant <dtenant_name> vrf <dvrf_name>

troubleshoot epext session srcip tenant application epg destextip

troubleshoot epext session <session_name> srcip <sip> tenant <stenant_name> application <sapp_name> epg <sepg_name> destextip <dip>

Description: External IP

Syntax:

session

session

session_name

session name

sip

source IP

tenant

tenant

stenant_name

source Tenant

sapp_name

source Application

epg

epg

sepg_name

source EPG

dip

external destination IP

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot epext session <session_name> srcip <sip> tenant <stenant_name> application <sapp_name> epg <sepg_name> destextip <dip>

troubleshoot epext session srcip tenant vrf destextip

troubleshoot epext session <session_name> srcip <sip> tenant <stenant_name> vrf <svrf_name> destextip <dip>

Description: external IP

Syntax:

session

session

session_name

session name

sip

source IP

tenant

tenant

stenant_name

source Tenant

svrf_name

source VRF

dip

external destination IP

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot epext session <session_name> srcip <sip> tenant <stenant_name> vrf <svrf_name> destextip <dip>

troubleshoot epext session starttime

troubleshoot epext session <session_name> starttime <start_time> endtime <end_time>

Description: Configure the start/end time of the session

Syntax:

session

session

session_name

session name

start_time

Start time (in YYYY-MM-DDTHH:MM:SS format)

endtime

end time

end_time

End time (in YYYY-MM-DDTHH:MM:SS format)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot epext session <session_name> starttime <start_time> endtime <end_time>

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot epext session traceroute

troubleshoot epext session <session_name> traceroute

Description: Start traceroute of a troubleshoot session

Syntax:

session

session

session_name

session name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot epext session <session_name> traceroute

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot epext session traceroute protocol icmp

troubleshoot epext session <session_name> traceroute protocol icmp

Description: ICMP protocol

Syntax:

session

session

session_name

session name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot epext session <session_name> traceroute protocol icmp

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot epext session traceroute protocol tcp

troubleshoot epext session <session_name> traceroute protocol tcp [destport <port>]

Description: TCP protocol

Syntax:

session

session

session_name

session name

port

(Optional) TCP destination port number. Number range from=0 to=65535

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot epext session <session_name> traceroute protocol tcp [destport <port>]

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot epext session traceroute protocol udp

troubleshoot epext session <session_name> traceroute protocol udp [destport <port>]

Description: UDP protocol

Syntax:

session

session

session_name

session name

port

(Optional) UDP destination port number. Number range from=0 to=65535

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot epext session <session_name> traceroute protocol udp [destport <port>]

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot eptoep session atomiccounter

troubleshoot eptoep session <session_name> atomiccounter

Description: Start atomic counter of a troubleshoot session

Syntax:

session

session

session_name

session name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> atomiccounter

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot eptoep session description

troubleshoot eptoep session <session_name> description <LINE>

Description: Set the description of a troubleshoot session

Syntax:

session

session

session_name

session name

LINE

Session description, use single quotes with spaces ex: 'my descr' (Max Size 128)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> description <LINE>

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot eptoep session latestminutes

troubleshoot eptoep session <session_name> latestminutes <minutes>

Description: Set the time window in number of minutes from current time

Syntax:

session

session

session_name

session name

minutes

number of minutes from current time. Number range from=5 to=1440

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> latestminutes <minutes>

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot eptoep session monitor destination apic

troubleshoot eptoep session <session_name> monitor destination apic srcipprefix <sip/m> [analyser <aip>] [erspan-id <id>] [spansrcports <pathep-list>]

Description: Configure this APIC as monitor destination

Syntax:

session

session

session_name

session name

destination

destinaton

srcipprefix

srcipprefix

sip/m

Source IP adddress and subnet mask length

aip

(Optional) IP address of the host analyser

id

(Optional) erspan Id. Number range from=1 to=1023

pathep-list

(Optional) List of source fabricPathEp dn

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> monitor destination apic srcipprefix <sip/m> [analyser <aip>] [erspan-id <id>] [spansrcports <pathep-list>]

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot eptoep session monitor destination prefdestgroup

troubleshoot eptoep session <session_name> monitor destination prefdestgroup <destgroup_name> [spansrcports <pathep-list>]

Description: Configure a predefined monitor destination

Syntax:

session

session

session_name

session name

destination

destinaton

destgroup_name

Destination group name

pathep-list

(Optional) List of source fabricPathEp dn

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> monitor destination prefdestgroup <destgroup_name> [spansrcports <pathep-list>]

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot eptoep session monitor destination tenant

troubleshoot eptoep session <session_name> monitor destination tenant <tn_name> application <ap_name> epg <epg_name> destip <dip> srcipprefix <sip/m> [erspan-id <id>] [spansrcports <pathep-list>]

Description: Configure tenant EPG as monitor destination

Syntax:

session

session

session_name

session name

destination

destinaton

tn_name

tenant name

application

application

ap_name

application name

epg

epg

epg_name

epg name

destip

destip

dip

destination IP address

srcipprefix

srcipprefix

sip/m

source IP address and subnet mask lenght

id

(Optional) erspan Id. Number range from=1 to=1023

pathep-list

(Optional) List of source fabricPathEp dn

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> monitor destination tenant <tn_name> application <ap_name> epg <epg_name> destip <dip> srcipprefix <sip/m> [erspan-id <id>] [spansrcports <pathep-list>]

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot eptoep session scheduler

troubleshoot eptoep session <session_name> scheduler <sch_name> [format <format>]

Description: Associate a scheduler to the troubleshoot session

Syntax:

session

session

session_name

session name

sch_name

scheduler name

format

(Optional) Report format

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> scheduler <sch_name> [format <format>]

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot eptoep session srcip tenant application epg destip tenant application

troubleshoot eptoep session <session_name> srcip <sip> tenant <stenant_name> application <sapp_name> epg <sepg_name> destip <dip> tenant <dtenant_name> application <dapp_name> epg <depg_name>

Description: application

Syntax:

session

session

session_name

session name

sip

source IP

tenant

tenant

stenant_name

source Tenant

sapp_name

source Application

epg

epg

sepg_name

source EPG

destip

destip

dip

destination IP

tenant

tenant

dtenant_name

destination Tenant

dapp_name

destination Application

epg

epg

depg_name

destination EPG

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> srcip <sip> tenant <stenant_name> application <sapp_name> epg <sepg_name> destip <dip> tenant <dtenant_name> application <dapp_name> epg <depg_name>

troubleshoot eptoep session srcip tenant application epg destip tenant vrf

troubleshoot eptoep session <session_name> srcip <sip> tenant <stenant_name> application <sapp_name> epg <sepg_name> destip <dip> tenant <dtenant_name> vrf <dvrf_name>

Description: vrf

Syntax:

session

session

session_name

session name

sip

source IP

tenant

tenant

stenant_name

source Tenant

sapp_name

source Application

epg

epg

sepg_name

source EPG

destip

destip

dip

destination IP

tenant

tenant

dtenant_name

destination Tenant

dvrf_name

destination VRF

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> srcip <sip> tenant <stenant_name> application <sapp_name> epg <sepg_name> destip <dip> tenant <dtenant_name> vrf <dvrf_name>

troubleshoot eptoep session srcip tenant vrf destip tenant application

troubleshoot eptoep session <session_name> srcip <sip> tenant <stenant_name> vrf <svrf_name> destip <dip> tenant <dtenant_name> application <dapp_name> epg <depg_name>

Description: application

Syntax:

session

session

session_name

session name

sip

source IP

tenant

tenant

stenant_name

source Tenant

svrf_name

source VRF

destip

destip

dip

destination IP

tenant

tenant

dtenant_name

destination Tenant

dapp_name

destination Application

epg

epg

depg_name

destination EPG

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> srcip <sip> tenant <stenant_name> vrf <svrf_name> destip <dip> tenant <dtenant_name> application <dapp_name> epg <depg_name>

troubleshoot eptoep session srcip tenant vrf destip tenant vrf

troubleshoot eptoep session <session_name> srcip <sip> tenant <stenant_name> vrf <svrf_name> destip <dip> tenant <dtenant_name> vrf <WORD>

Description: vrf

Syntax:

session

session

session_name

session name

sip

source IP

tenant

tenant

stenant_name

source Tenant

svrf_name

source VRF

destip

destip

dip

destination IP

tenant

tenant

dtenant_name

destination Tenant

WORD

destination VRF

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> srcip <sip> tenant <stenant_name> vrf <svrf_name> destip <dip> tenant <dtenant_name> vrf <WORD>

troubleshoot eptoep session srcmac tenant application epg destmac tenant application

troubleshoot eptoep session <session_name> srcmac <smac> tenant <stenant_name> application <sapp_name> epg <sepg_name> destmac <dmac> tenant <dtenant_name> application <dapp_name> epg <depg_name>

Description: application

Syntax:

session

session

session_name

session name

smac

source MAC

tenant

tenant

stenant_name

source Tenant

sapp_name

source Application

epg

epg

sepg_name

source EPG

destmac

destmac

dmac

destination MAC

tenant

tenant

dtenant_name

destination Tenant

dapp_name

destination Application

epg

epg

depg_name

destination EPG

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> srcmac <smac> tenant <stenant_name> application <sapp_name> epg <sepg_name> destmac <dmac> tenant <dtenant_name> application <dapp_name> epg <depg_name>

troubleshoot eptoep session srcmac tenant application epg destmac tenant vrf

troubleshoot eptoep session <session_name> srcmac <smac> tenant <stenant_name> application <sapp_name> epg <sepg_name> destmac <dmac> tenant <dtenant_name> vrf <dvrf_name>

Description: vrf

Syntax:

session

session

session_name

session name

smac

source MAC

tenant

tenant

stenant_name

source Tenant

sapp_name

source Application

epg

epg

sepg_name

source EPG

destmac

destmac

dmac

destination MAC

tenant

tenant

dtenant_name

destination Tenant

dvrf_name

destination VRF

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> srcmac <smac> tenant <stenant_name> application <sapp_name> epg <sepg_name> destmac <dmac> tenant <dtenant_name> vrf <dvrf_name>

troubleshoot eptoep session srcmac tenant vrf destmac tenant application

troubleshoot eptoep session <session_name> srcmac <smac> tenant <stenant_name> vrf <svrf_name> destmac <dmac> tenant <dtenant_name> application <dapp_name> epg <depg_name>

Description: application

Syntax:

session

session

session_name

session name

smac

source MAC

tenant

tenant

stenant_name

source Tenant

svrf_name

source VRF

destmac

destmac

dmac

destination MAC

tenant

tenant

dtenant_name

destination Tenant

dapp_name

destination Application

epg

epg

depg_name

destination EPG

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> srcmac <smac> tenant <stenant_name> vrf <svrf_name> destmac <dmac> tenant <dtenant_name> application <dapp_name> epg <depg_name>

troubleshoot eptoep session srcmac tenant vrf destmac tenant vrf

troubleshoot eptoep session <session_name> srcmac <smac> tenant <stenant_name> vrf <svrf_name> destmac <dmac> tenant <dtenant_name> vrf <dvrf_name>

Description: vrf

Syntax:

session

session

session_name

session name

smac

source MAC

tenant

tenant

stenant_name

source Tenant

svrf_name

source VRF

destmac

destmac

dmac

destination MAC

tenant

tenant

dtenant_name

destination Tenant

dvrf_name

destination VRF

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> srcmac <smac> tenant <stenant_name> vrf <svrf_name> destmac <dmac> tenant <dtenant_name> vrf <dvrf_name>

troubleshoot eptoep session starttime

troubleshoot eptoep session <session_name> starttime <start_time> endtime <end_time>

Description: Configure the start/end time of the session

Syntax:

session

session

session_name

session name

start_time

Start time (in YYYY-MM-DDTHH:MM:SS format)

endtime

end time

end_time

End time (in YYYY-MM-DDTHH:MM:SS format)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> starttime <start_time> endtime <end_time>

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot eptoep session traceroute

troubleshoot eptoep session <session_name> traceroute

Description: Start traceroute of a troubleshoot session

Syntax:

session

session

session_name

session name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> traceroute

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot eptoep session traceroute protocol icmp

troubleshoot eptoep session <session_name> traceroute protocol icmp

Description: ICMP protocol

Syntax:

session

session

session_name

session name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> traceroute protocol icmp

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot eptoep session traceroute protocol tcp

troubleshoot eptoep session <session_name> traceroute protocol tcp [destport <port>]

Description: TCP protocol

Syntax:

session

session

session_name

session name

port

(Optional) TCP destination port number. Number range from=0 to=65535

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> traceroute protocol tcp [destport <port>]

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

troubleshoot eptoep session traceroute protocol udp

troubleshoot eptoep session <session_name> traceroute protocol udp [destport <port>]

Description: UDP protocol

Syntax:

session

session

session_name

session name

port

(Optional) UDP destination port number. Number range from=0 to=65535

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# troubleshoot eptoep session <session_name> traceroute protocol udp [destport <port>]

Usage Note:

The usage of the troubleshoot epext session commands and the troubleshoot eptoep session commands differs in the following way:

- Use the troubleshoot epext session command when one endpoint is local to the fabric and the other endpoint is external to the fabric.

- Use the troubleshoot eptoep session command when both endpoints are local to the fabric.

trusted-key

trusted-key <id>

Description: Configure trusted for ntp authentication key

Syntax:

id

Id for the trusted key. Number range from=1 to=65535

Command Mode: ntp : Configure the default ntp policy

Command Path:

# configure [['terminal', 't']]
(config)# pod 1
(config-pod)# ntp
(config-ntp)# trusted-key <id>

Chapter 20. U Commands

- ui-idle-timeout-seconds

- unicast

- update-source ethernet

- update-source loopback

- update-source vlan

- use-keyring

- use-vrf

- user

- username

ui-idle-timeout-seconds

ui-idle-timeout-seconds <NUMBER>

Description: Set maximum GUI idle duration before requiring login refresh

Syntax:

<60-65525>

Set maximum GUI idle duration before requiring login refresh. Number range from=60 to=65525

Command Mode: crypto webtoken : The cryptographic data used for generating and verifying web tokens.

Command Path:

# configure [['terminal', 't']]
(config)# crypto webtoken
(config-webtoken)# ui-idle-timeout-seconds <NUMBER>

unicast

unicast routing

Description: Instruct the fabric to route based on IP

Syntax:

routing

Unicast routing setting

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# unicast routing

update-source ethernet

update-source ethernet <interfaceRange>

Description: Source Ethernet Interface

Syntax:

<interfaceRange>

<interfaceRange>

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# update-source ethernet <interfaceRange>

update-source loopback

update-source loopback <A.B.C.D>

Description: Source Loopback Interface

Syntax:

A.B.C.D

IPv4 or IPv6 Address without mask

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# update-source loopback <A.B.C.D>

update-source vlan

update-source vlan <vlan>

Description: Source Vlan Interface

Syntax:

<vlan>

Vlan ID

Command Mode: neighbor : Configure a BGP neighbor

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# update-source vlan <vlan>

use-keyring

use-keyring <keyring-name>

Description: Use specified keyring for the HTTPS Server SSL certificate

Syntax:

keyring-name

Keyring name (Max Size 64)

Command Mode: https : HTTPS communication policy group

Command Path:

# configure [['terminal', 't']]
(config)# comm-policy <WORD>
(config-comm-policy)# https
(config-https)# use-keyring <keyring-name>

use-vrf

use-vrf <arg>

Description: Configure the management vrf for dns servers

Syntax:

arg

Configure management vrf

Command Mode: dns : Configure default dns policy

Command Path:

# configure [['terminal', 't']]
(config)# dns
(config-dns)# use-vrf <>

user

user <WORD>

Description: Set the remote path user name and password

Syntax:

WORD

User name

Command Mode: remote : Remote path configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# remote path <WORD>
(config-remote)# user <WORD>

username

username <WORD>

Description: Create a locally-authenticated user account

Syntax:

WORD

User name (Max Size 28)

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# username <WORD>

username <WORD>

Description: Configure a user account for the VCenter

Syntax:

WORD

Username for the account

Command Mode: vcenter : Configure a VCenter in the VMware domain

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# vcenter <> datacenter <WORD> [dvs-version <>]
(config-vmware-vc)# username <WORD>

username <WORD>

Description: Configure a user account for the vshield

Syntax:

WORD

Username for the account

Command Mode: vshield : Configure a VShield in the VMware domain

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# vcenter <> datacenter <WORD> [dvs-version <>]
(config-vmware-vc)# vshield <>
(config-vmware-vc-vs)# username <WORD>

Chapter 21. V Commands

- vcenter

- vlan-domain

- vlan-pool

- vlan

- vmware-domain

- vnic

- vpc context

- vpc domain consecutive

- vpc domain explicit

- vpc domain reciprocal

- vrf

- vshield

- vxlan

- vxlan multicast-pool

- vxlan pool

vcenter

vcenter <arg> datacenter <WORD> [dvs-version <arg>]

Description: Configure a VCenter in the VMware domain

Syntax:

arg

datacenter

Datacenter Name

WORD

Datacenter Name

arg

(Optional)

Command Mode: vmware-domain : Create a VMM VMware Domain

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# vcenter <> datacenter <WORD> [dvs-version <>]

vlan-domain

vlan-domain <name> [dynamic] [type <domain-type>]

Description: Configure vlan domain

Syntax:

name

Vlan domain name (Max Size 64)

dynamic

(Optional) Create dynamic namespace(default is static)

<domain-type>

(Optional) Vlan domain type

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# vlan-domain <name> [dynamic] [type <domain-type>]

vlan-domain member <WORD> [type <arg>]

Description: Attach VMware Domain to a VLAN Domain

Syntax:

member

Bind VMware domain to vlan domain

WORD

VLAN Domain name

arg

(Optional) Vlan domain type

Command Mode: vmware-domain : Create a VMM VMware Domain

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# vlan-domain member <WORD> [type <>]

vlan-domain member <WORD> [type <arg>]

Description: Attach Microsoft Domain to a VLAN Domain

Syntax:

member

Bind Microsoft domain to vlan domain

WORD

VLAN Domain name

arg

(Optional) Vlan domain type

Command Mode: microsoft-domain : Create a VMM Microsoft Domain

Command Path:

# configure [['terminal', 't']]
(config)# microsoft-domain <WORD>
(config-microsoft)# vlan-domain member <WORD> [type <>]

vlan-domain member <WORD> [type <arg>]

Description: Configure Vlan Domain

Syntax:

member

Configure Vlan Domain Member

WORD

Vlan domain name (Max Size 64)

arg

(Optional)

Command Mode: template policy-group : Configure Policy Group Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template policy-group <WORD>
(config-pol-grp-if)# vlan-domain member <WORD> [type <>]

vlan-domain member <WORD> [type <arg>]

Description: Configure Vlan Domain

Syntax:

member

Configure Vlan Domain Member

WORD

Vlan domain name (Max Size 64)

arg

(Optional)

Command Mode: template port-channel : Configure Port-Channel Parameters

Command Path:

# configure [['terminal', 't']]
(config)# template port-channel <WORD>
(config-if)# vlan-domain member <WORD> [type <>]

vlan-domain member <WORD> [type <arg>]

Description: Configure Vlan Domain

Syntax:

member

Configure Vlan Domain Member

WORD

Vlan domain name (Max Size 64)

arg

(Optional)

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# vlan-domain member <WORD> [type <>]

vlan-domain member <WORD> [type <arg>]

Description: Configure Vlan Domain

Syntax:

member

Configure Vlan Domain Member

WORD

Vlan domain name (Max Size 64)

arg

(Optional)

Command Mode: interface port-channel : Port Channel interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface port-channel <WORD> [fex <fex>]
(config-leaf-if)# vlan-domain member <WORD> [type <>]

vlan-domain member <WORD> [type <arg>]

Description: Configure Vlan Domain

Syntax:

member

Configure Vlan Domain Member

WORD

Vlan domain name (Max Size 64)

arg

(Optional)

Command Mode: interface : Provide VPC Name

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
(config-vpc)# interface vpc <WORD> [fex <fex>]
(config-vpc-if)# vlan-domain member <WORD> [type <>]

vlan-pool

vlan-pool <pool-name>

Description: Assign vlan-pool to vlan-domain

Syntax:

pool-name

Vlan-pool name (Max Size 64)

Command Mode: vlan-domain : Configure vlan domain

Command Path:

# configure [['terminal', 't']]
(config)# vlan-domain <name> [dynamic] [type <domain-type>]
(config-vlan)# vlan-pool <pool-name>

vlan

vlan <vlan-range> [dynamic]

Description: Add VLANs to vlan-domain

Syntax:

<vlan-range>

VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19

dynamic

(Optional) Vlan allocation dynamically managed by APIC(default is static)

Command Mode: vlan-domain : Configure vlan domain

Command Path:

# configure [['terminal', 't']]
(config)# vlan-domain <name> [dynamic] [type <domain-type>]
(config-vlan)# vlan <vlan-range> [dynamic]

vlan <1-4094>

Description: Configure Vlan for inband epg Controller inband ports

Syntax:

<1-4094>

Vlan interface number

Command Mode: inband-mgmt : Enter Inside In-band management mode to modify inband properties or create new inband

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# inband-mgmt epg <WORD>
(config-inb-epg)# vlan <1-4094>

vlan <1-4094>

Description: Configure Vlan for APIC Inband Port

Syntax:

<1-4094>

Vlan interface number

Command Mode: interface inband-mgmt0 : Inband management interface

Command Path:

# configure [['terminal', 't']]
(config)# controller
(config-controller)# interface inband-mgmt0
(config-controller-if)# vlan <1-4094>

vmware-domain

vmware-domain <WORD>

Description: Create a VMM VMware Domain

Syntax:

WORD

VMM VMware Domain name

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>

vmware-domain member <WORD> [encap <WORD>] [primary-encap <WORD>] [allow-micro-segmentation] [deploy <WORD>] [push <WORD>]

Description: Associate EPG to a VMWare Domain

Syntax:

member

Bind the EPG to a VMware domain

WORD

VMware Domain Name

WORD

(Optional) Enforce encap value. Secondary encap when EPG is isolated (For example vlan-10 or auto)

WORD

(Optional) Primary encap when EPG is isolated (For example vlan-11 or auto)

allow-micro-segmentation

(Optional) allow-micro-segmentation

WORD

(Optional) Deployment mode

WORD

(Optional) Push mode

Command Mode: epg : AEPg configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# vmware-domain member <WORD> [encap <WORD>] [primary-encap <WORD>] [allow-micro-segmentation] [deploy <WORD>] [push <WORD>]

vnic

vnic <vnic-name>

Description: Configure Virtual NIC as Cluster Member Interface

Syntax:

<vnic-name>

Name of VNIC of virtual cluster device.

Command Mode: member : Configure Cluster Interface Member

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>]
(config-cluster)# cluster-interface <WORD> [vlan <NUMBER>]
(config-cluster-interface)# member device <WORD> device-interface <WORD>
(config-member)# vnic <vnic-name>

vpc context

vpc context leaf <101-4000> <101-4000> [fex <fex>]

Description: Enter vpc context

Syntax:

leaf

Provide leaf details

<101-4000>

Id or Name of Leaf1

<101-4000>

Id or Name of Leaf2

fex

(Optional) Fex Id. Number range from=101 to=164

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]

vpc domain consecutive

vpc domain consecutive

Description: Pair all discovered leaves consecutively e.g. 101-102, 103-104

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# vpc domain consecutive

vpc domain explicit

vpc domain explicit <NUMBER> leaf <101-4000> <101-4000>

Description: Pair two leaf nodes explicitly

Syntax:

<1-1000>

Domain Id. Number range from=1 to=1000

leaf

Pair two leaf nodes

<101-4000>

First leaf member of the Pair

<101-4000>

Second leaf member of the Pair

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# vpc domain explicit <NUMBER> leaf <101-4000> <101-4000>

vpc domain reciprocal

vpc domain reciprocal

Description: Pair all discovered leaves reciprocally e.g. 101-103, 102-104

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# vpc domain reciprocal

vrf

vrf context <WORD>

Description: Configuration for vrf

Syntax:

context

VRF name

WORD

VRF name (Max Size 64)

Command Mode: tenant : tenant configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# vrf context <WORD>

vrf member <WORD>

Description: Configure VRF parameters

Syntax:

member

Set L3Out's VRF membership

WORD

VRF name

Command Mode: l3out : Configuration for L3Out

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# l3out <WORD>
(config-tenant-l3out)# vrf member <WORD>

vrf member <WORD>

Description: Associate the bridge-domain with a VRF

Syntax:

member

Associate the bridge-domain with a VRF

WORD

VRF name to associated (Max Size 64)

Command Mode: bridge-domain : Configuration for bridge-domain

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# bridge-domain <WORD>
(config-tenant-bd)# vrf member <WORD>

vrf member <WORD>

Description: Configure VRF parameters

Syntax:

member

Set interface's VRF membership

WORD

VRF name

Command Mode: external-l3 epg : External L3 EPG configuration mode

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>]
(config-tenant-l3ext-epg)# vrf member <WORD>

vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]

Description: Configure VRF parameters

Syntax:

context

Enable VRF and enter VRF mode

tenant

Tenant for the VRF

WORD

Tenant name

vrf

Virtual Routing and Forwarding instance

WORD

VRF name

l3out

(Optional) Configure VRF in API created l3out

Command Mode: leaf : Configure Leaf Node

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]

vrf member tenant <WORD> vrf <WORD>

Description: Configure VRF parameters

Syntax:

member

Set interface's VRF membership

tenant

Tenant

WORD

Tenant name

vrf

Virtual Routing and Forwarding instance

WORD

VRF name

Command Mode: interface vlan : Vlan interface

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface vlan <1-4094>
(config-leaf-if)# vrf member tenant <WORD> vrf <WORD>

vrf member tenant <WORD> vrf <WORD> [l3out] WORD

Description: Configure VRF parameters

Syntax:

member

Set interface's VRF membership

tenant

Tenant

WORD

Tenant name

vrf

Virtual Routing and Forwarding instance

WORD

VRF name

l3out

(Optional) Enable VRF on one or more l3extOut

WORD

l3extOut Name

Command Mode: interface ethernet : Ethernet IEEE 802.3z

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# interface ethernet <ifRange>
(config-leaf-if)# vrf member tenant <WORD> vrf <WORD> [l3out] WORD

vrf member tenant <WORD> vrf <WORD>

Description: Configure VRF information

Syntax:

member

Set VRF membership

tenant

Tenant

WORD

Tenant name

vrf

VRF

WORD

VRF name

Command Mode: router eigrp : Enhanced Interior Gateway Routing Protocol (EIGRP)

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router eigrp default
(config-eigrp)# vrf member tenant <WORD> vrf <WORD>

vrf member tenant <WORD> vrf <WORD>

Description: Associate Router OSPF Policy with Tenant/VRF

Syntax:

member

Set VRF membership

tenant

Tenant for the OSPF Policy

WORD

Tenant name

vrf

VRF

WORD

VRF name

Command Mode: router ospf : Open Shortest Path First (OSPF and OSPF Version3)

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router ospf default
(config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>

vrf member tenant <WORD> vrf <WORD>

Description: Virtual Router Context

Syntax:

member

Set BGP's VRF membership

tenant

Tenant for the BGP Policy

WORD

Tenant Name (Max Size 63)

vrf

Virtual Routing and Forwarding instance

WORD

VRF Name (Max Size 64)

Command Mode: router bgp : Border Gateway Protocol (BGP)

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>

vshield

vshield <arg>

Description: Configure a VShield in the VMware domain

Syntax:

arg

Command Mode: vcenter : Configure a VCenter in the VMware domain

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# vcenter <> datacenter <WORD> [dvs-version <>]
(config-vmware-vc)# vshield <>

vxlan

vxlan multicast-pool <ip-range>

Description: Configure VXLAN multicast pool.

Syntax:

multicast-pool

multicast pool

<ip-range>

Multicast IP range

Command Mode: configure-avs : Configure a VMware Domain as AVS (N1K) type

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# configure-avs
(config-vmware-avs)# vxlan multicast-pool <ip-range>

vxlan multicast-pool

vxlan multicast-pool <ip-range>

Description: Configure VXLAN multicast pool.

Syntax:

<ip-range>

Multicast IP range

Command Mode: vshield : Configure a VShield in the VMware domain

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# vcenter <> datacenter <WORD> [dvs-version <>]
(config-vmware-vc)# vshield <>
(config-vmware-vc-vs)# vxlan multicast-pool <ip-range>

vxlan pool

vxlan pool <vxlan-range>

Description: Configure VXLAN pool.

Syntax:

<vxlan-range>

VXLAN range

Command Mode: vshield : Configure a VShield in the VMware domain

Command Path:

# configure [['terminal', 't']]
(config)# vmware-domain <WORD>
(config-vmware)# vcenter <> datacenter <WORD> [dvs-version <>]
(config-vmware-vc)# vshield <>
(config-vmware-vc-vs)# vxlan pool <vxlan-range>

Chapter 22. W Commands

- webtoken-timeout-seconds

- weight

- where

- where detail

- winservers

webtoken-timeout-seconds

webtoken-timeout-seconds <NUMBER>

Description: Set The web token timeout interval

Syntax:

<300-9600>

Set The web token timeout interval. Number range from=300 to=9600

Command Mode: crypto webtoken : The cryptographic data used for generating and verifying web tokens.

Command Path:

# configure [['terminal', 't']]
(config)# crypto webtoken
(config-webtoken)# webtoken-timeout-seconds <NUMBER>

weight

weight <NUMBER>

Description: Weight attribute that is local to a router.

Syntax:

<0-65535>

Assigns a weight to all routes learned through the neighbor. Number range from=0 to=65535

Command Mode: address-family : Configure an address-family for peer

Command Path:

# configure [['terminal', 't']]
(config)# leaf <101-4000>
(config-leaf)# router bgp <fabric-ASN>
(config-bgp)# vrf member tenant <WORD> vrf <WORD>
(config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>]
(config-leaf-bgp-vrf-neighbor)# address-family ipv4|ipv6 unicast
(config-leaf-bgp-vrf-neighbor-af)# weight <NUMBER>

where

where

Description: show the current mode

Command Mode: exec : Exec Mode

Command Path:

# where

where detail

where detail

Description: show detailed mode information

Command Mode: exec : Exec Mode

Command Path:

# where detail

winservers

winservers <windows server ip>

Description: Add windows server

Syntax:

windows server ip

windows server ip

Command Mode: microsoft : Configure static ip pool

Command Path:

# configure [['terminal', 't']]
(config)# tenant <WORD>
(config-tenant)# application <WORD>
(config-tenant-app)# epg <WORD> [type <WORD>]
(config-tenant-app-epg)# microsoft static-ip-pool <name> gateway <gwAddress>
(config-tenant-app-epg-ms-ip-pool)# winservers <windows server ip>

Chapter 23. Z Commands

- zone

- zones

zone

zone <WORD>

Description: Create zone policy

Syntax:

WORD

zone name (Max Size 64)

Command Mode: zones : Zones configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# zones
(config-zones)# zone <WORD>

zones

zones

Description: Zones configuration Mode

Command Mode: configure : Configuration Mode

Command Path:

# configure [['terminal', 't']]
(config)# zones

Preface

- Audience

- Document Conventions

- Related Documentation

- Documentation Feedback

Audience

This guide is intended for network and systems administrators who configure and maintain the Application Centric Infrastructure fabric.

Document Conventions

Command descriptions use the following conventions:

Convention

Description

bold

Bold text indicates the commands and keywords that you enter literally as shown.

Italic

Italic text indicates arguments for which the user supplies the values.

[x]

Square brackets enclose an optional element (keyword or argument).

[x | y]

Square brackets enclosing keywords or arguments separated by a vertical bar indicate an optional choice.

{x | y}

Braces enclosing keywords or arguments separated by a vertical bar indicate a required choice.

[x {y | z}]

Nested set of square brackets or braces indicate optional or required choices within optional or required elements. Braces and a vertical bar within square brackets indicate a required choice within an optional element.

variable

Indicates a variable for which you supply values, in context where italics cannot be used.

string

A nonquoted set of characters. Do not use quotation marks around the string or the string will include the quotation marks.

Examples use the following conventions:

Convention

Description

screen font

Terminal sessions and information the switch displays are in screen font.

boldface screen font

Information you must enter is in boldface screen font.

italic screen font

Arguments for which you supply values are in italic screen font.

< >

Nonprinting characters, such as passwords, are in angle brackets.

[ ]

Default responses to system prompts are in square brackets.

!, #

An exclamation point (!) or a pound sign (#) at the beginning of a line of code indicates a comment line.

This document uses the following conventions:

Note

Means reader take note. Notes contain helpful suggestions or references to material not covered in the manual.

Caution

Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data.

Warning

IMPORTANT SAFETY INSTRUCTIONS

This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Use the statement number provided at the end of each warning to locate its translation in the translated safety warnings that accompanied this device.

SAVE THESE INSTRUCTIONS

Related Documentation

Cisco Application Centric Infrastructure (ACI) Documentation

The ACI documentation is available at the following URL: Click Here .

Cisco Application Centric Infrastructure (ACI) Simulator Documentation

The Cisco ACI Simulator documentation is available at Click Here .

Cisco Nexus 9000 Series Switches Documentation

The Cisco Nexus 9000 Series Switches documentation is available at Click Here .

Cisco Application Virtual Switch Documentation

The Cisco Application Virtual Switch (AVS) documentation is available at Click Here .

Cisco Application Centric Infrastructure (ACI) Integration with OpenStack Documentation

Cisco ACI integration with OpenStack documentation is available at Click Here .

Documentation Feedback

To provide technical feedback on this document, or to report an error or omission, please send your comments to apic-docfeedback@cisco.com. We appreciate your feedback.