The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Description: Set maximum GUI idle duration before requiring login refresh
Syntax:
<60-65525> |
Set maximum GUI idle duration before requiring login refresh. Number range from=60 to=65525 |
Command Mode: crypto webtoken : The cryptographic data used for generating and verifying web tokens.
Command Path:
# configure [['terminal', 't']] (config)# crypto webtoken (config-webtoken)# ui-idle-timeout-seconds <NUMBER>
Description: Instruct the fabric to route based on IP
Syntax:
routing |
Unicast routing setting |
Command Mode: bridge-domain : Configuration for bridge-domain
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# bridge-domain <WORD> (config-tenant-bd)# unicast routing
Description: Source Ethernet Interface
Syntax:
<interfaceRange> |
<interfaceRange> |
Command Mode: neighbor : Configure a BGP neighbor
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# router bgp <fabric-ASN> (config-bgp)# vrf member tenant <WORD> vrf <WORD> (config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>] (config-leaf-bgp-vrf-neighbor)# update-source ethernet <interfaceRange>
Description: Source Loopback Interface
Syntax:
A.B.C.D |
IPv4 or IPv6 Address without mask |
Command Mode: neighbor : Configure a BGP neighbor
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# router bgp <fabric-ASN> (config-bgp)# vrf member tenant <WORD> vrf <WORD> (config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>] (config-leaf-bgp-vrf-neighbor)# update-source loopback <A.B.C.D>
Description: Source Vlan Interface
Syntax:
<vlan> |
Vlan ID |
Command Mode: neighbor : Configure a BGP neighbor
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# router bgp <fabric-ASN> (config-bgp)# vrf member tenant <WORD> vrf <WORD> (config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>] (config-leaf-bgp-vrf-neighbor)# update-source vlan <vlan>
Description: Use specified keyring for the HTTPS Server SSL certificate
Syntax:
keyring-name |
Keyring name (Max Size 64) |
Command Mode: https : HTTPS communication policy group
Command Path:
# configure [['terminal', 't']] (config)# comm-policy <WORD> (config-comm-policy)# https (config-https)# use-keyring <keyring-name>
Description: Configure the management vrf for dns servers
Syntax:
arg |
Configure management vrf |
Command Mode: dns : Configure default dns policy
Command Path:
# configure [['terminal', 't']] (config)# dns (config-dns)# use-vrf <>
Description: Set the remote path user name and password
Syntax:
WORD |
User name |
Command Mode: remote : Remote path configuration mode
Command Path:
# configure [['terminal', 't']] (config)# remote path <WORD> (config-remote)# user <WORD>
Description: Create a locally-authenticated user account
Syntax:
WORD |
User name (Max Size 28) |
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']] (config)# username <WORD>
Description: Configure a user account for the VCenter
Syntax:
WORD |
Username for the account |
Command Mode: vcenter : Configure a VCenter in the VMware domain
Command Path:
# configure [['terminal', 't']] (config)# vmware-domain <WORD> (config-vmware)# vcenter <> datacenter <WORD> [dvs-version <>] (config-vmware-vc)# username <WORD>
Description: Configure a user account for the vshield
Syntax:
WORD |
Username for the account |
Command Mode: vshield : Configure a VShield in the VMware domain
Command Path:
# configure [['terminal', 't']] (config)# vmware-domain <WORD> (config-vmware)# vcenter <> datacenter <WORD> [dvs-version <>] (config-vmware-vc)# vshield <> (config-vmware-vc-vs)# username <WORD>