The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Description: Configure a VCenter in the VMware domain
Syntax:
arg |
|
datacenter |
Datacenter Name |
WORD |
Datacenter Name |
arg |
(Optional) |
Command Mode: vmware-domain : Create a VMM VMware Domain
Command Path:
# configure [['terminal', 't']] (config)# vmware-domain <WORD> (config-vmware)# vcenter <> datacenter <WORD> [dvs-version <>]
Description: Configure vlan domain
Syntax:
name |
Vlan domain name (Max Size 64) |
dynamic |
(Optional) Create dynamic namespace(default is static) |
<domain-type> |
(Optional) Vlan domain type |
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']] (config)# vlan-domain <name> [dynamic] [type <domain-type>]
Description: Attach VMware Domain to a VLAN Domain
Syntax:
member |
Bind VMware domain to vlan domain |
WORD |
VLAN Domain name |
arg |
(Optional) Vlan domain type |
Command Mode: vmware-domain : Create a VMM VMware Domain
Command Path:
# configure [['terminal', 't']] (config)# vmware-domain <WORD> (config-vmware)# vlan-domain member <WORD> [type <>]
Description: Attach Microsoft Domain to a VLAN Domain
Syntax:
member |
Bind Microsoft domain to vlan domain |
WORD |
VLAN Domain name |
arg |
(Optional) Vlan domain type |
Command Mode: microsoft-domain : Create a VMM Microsoft Domain
Command Path:
# configure [['terminal', 't']] (config)# microsoft-domain <WORD> (config-microsoft)# vlan-domain member <WORD> [type <>]
Description: Configure Vlan Domain
Syntax:
member |
Configure Vlan Domain Member |
WORD |
Vlan domain name (Max Size 64) |
arg |
(Optional) |
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']] (config)# template policy-group <WORD> (config-pol-grp-if)# vlan-domain member <WORD> [type <>]
Description: Configure Vlan Domain
Syntax:
member |
Configure Vlan Domain Member |
WORD |
Vlan domain name (Max Size 64) |
arg |
(Optional) |
Command Mode: template port-channel : Configure Port-Channel Parameters
Command Path:
# configure [['terminal', 't']] (config)# template port-channel <WORD> (config-if)# vlan-domain member <WORD> [type <>]
Description: Configure Vlan Domain
Syntax:
member |
Configure Vlan Domain Member |
WORD |
Vlan domain name (Max Size 64) |
arg |
(Optional) |
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# interface ethernet <ifRange> (config-leaf-if)# vlan-domain member <WORD> [type <>]
Description: Configure Vlan Domain
Syntax:
member |
Configure Vlan Domain Member |
WORD |
Vlan domain name (Max Size 64) |
arg |
(Optional) |
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# interface port-channel <WORD> [fex <fex>] (config-leaf-if)# vlan-domain member <WORD> [type <>]
Description: Configure Vlan Domain
Syntax:
member |
Configure Vlan Domain Member |
WORD |
Vlan domain name (Max Size 64) |
arg |
(Optional) |
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']] (config)# vpc context leaf <101-4000> <101-4000> [fex <fex>] (config-vpc)# interface vpc <WORD> [fex <fex>] (config-vpc-if)# vlan-domain member <WORD> [type <>]
Description: Assign vlan-pool to vlan-domain
Syntax:
pool-name |
Vlan-pool name (Max Size 64) |
Command Mode: vlan-domain : Configure vlan domain
Command Path:
# configure [['terminal', 't']] (config)# vlan-domain <name> [dynamic] [type <domain-type>] (config-vlan)# vlan-pool <pool-name>
Description: Add VLANs to vlan-domain
Syntax:
<vlan-range> |
VLAN ID 1-4094 or range(s): 1-5, 10 or 2-5,7-19 |
dynamic |
(Optional) Vlan allocation dynamically managed by APIC(default is static) |
Command Mode: vlan-domain : Configure vlan domain
Command Path:
# configure [['terminal', 't']] (config)# vlan-domain <name> [dynamic] [type <domain-type>] (config-vlan)# vlan <vlan-range> [dynamic]
Description: Configure Vlan for inband epg Controller inband ports
Syntax:
<1-4094> |
Vlan interface number |
Command Mode: inband-mgmt : Enter Inside In-band management mode to modify inband properties or create new inband
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# inband-mgmt epg <WORD> (config-inb-epg)# vlan <1-4094>
Description: Configure Vlan for APIC Inband Port
Syntax:
<1-4094> |
Vlan interface number |
Command Mode: interface inband-mgmt0 : Inband management interface
Command Path:
# configure [['terminal', 't']] (config)# controller (config-controller)# interface inband-mgmt0 (config-controller-if)# vlan <1-4094>
Description: Create a VMM VMware Domain
Syntax:
WORD |
VMM VMware Domain name |
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']] (config)# vmware-domain <WORD>
Description: Associate EPG to a VMWare Domain
Syntax:
member |
Bind the EPG to a VMware domain |
WORD |
VMware Domain Name |
WORD |
(Optional) Enforce encap value. Secondary encap when EPG is isolated (For example vlan-10 or auto) |
WORD |
(Optional) Primary encap when EPG is isolated (For example vlan-11 or auto) |
allow-micro-segmentation |
(Optional) allow-micro-segmentation |
WORD |
(Optional) Deployment mode |
WORD |
(Optional) Push mode |
Command Mode: epg : AEPg configuration mode
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# application <WORD> (config-tenant-app)# epg <WORD> [type <WORD>] (config-tenant-app-epg)# vmware-domain member <WORD> [encap <WORD>] [primary-encap <WORD>] [allow-micro-segmentation] [deploy <WORD>] [push <WORD>]
Description: Configure Virtual NIC as Cluster Member Interface
Syntax:
<vnic-name> |
Name of VNIC of virtual cluster device. |
Command Mode: member : Configure Cluster Interface Member
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# l4l7 cluster name <WORD> type <type> vlan-domain <domain-name> [service <service>] [function <function>] (config-cluster)# cluster-interface <WORD> [vlan <NUMBER>] (config-cluster-interface)# member device <WORD> device-interface <WORD> (config-member)# vnic <vnic-name>
Description: Enter vpc context
Syntax:
leaf |
Provide leaf details |
<101-4000> |
Id or Name of Leaf1 |
<101-4000> |
Id or Name of Leaf2 |
fex |
(Optional) Fex Id. Number range from=101 to=164 |
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']] (config)# vpc context leaf <101-4000> <101-4000> [fex <fex>]
Description: Pair all discovered leaves consecutively e.g. 101-102, 103-104
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']] (config)# vpc domain consecutive
Description: Pair two leaf nodes explicitly
Syntax:
<1-1000> |
Domain Id. Number range from=1 to=1000 |
leaf |
Pair two leaf nodes |
<101-4000> |
First leaf member of the Pair |
<101-4000> |
Second leaf member of the Pair |
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']] (config)# vpc domain explicit <NUMBER> leaf <101-4000> <101-4000>
Description: Pair all discovered leaves reciprocally e.g. 101-103, 102-104
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']] (config)# vpc domain reciprocal
Description: Configuration for vrf
Syntax:
context |
VRF name |
WORD |
VRF name (Max Size 64) |
Command Mode: tenant : tenant configuration mode
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# vrf context <WORD>
Description: Configure VRF parameters
Syntax:
member |
Set L3Out's VRF membership |
WORD |
VRF name |
Command Mode: l3out : Configuration for L3Out
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# l3out <WORD> (config-tenant-l3out)# vrf member <WORD>
Description: Associate the bridge-domain with a VRF
Syntax:
member |
Associate the bridge-domain with a VRF |
WORD |
VRF name to associated (Max Size 64) |
Command Mode: bridge-domain : Configuration for bridge-domain
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# bridge-domain <WORD> (config-tenant-bd)# vrf member <WORD>
Description: Configure VRF parameters
Syntax:
member |
Set interface's VRF membership |
WORD |
VRF name |
Command Mode: external-l3 epg : External L3 EPG configuration mode
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# external-l3 epg <WORD> [oob-mgmt] [l3out <l3out>] (config-tenant-l3ext-epg)# vrf member <WORD>
Description: Configure VRF parameters
Syntax:
context |
Enable VRF and enter VRF mode |
tenant |
Tenant for the VRF |
WORD |
Tenant name |
vrf |
Virtual Routing and Forwarding instance |
WORD |
VRF name |
l3out |
(Optional) Configure VRF in API created l3out |
Command Mode: leaf : Configure Leaf Node
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# vrf context tenant <WORD> vrf <WORD> [l3out <l3out>]
Description: Configure VRF parameters
Syntax:
member |
Set interface's VRF membership |
tenant |
Tenant |
WORD |
Tenant name |
vrf |
Virtual Routing and Forwarding instance |
WORD |
VRF name |
Command Mode: interface vlan : Vlan interface
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# interface vlan <1-4094> (config-leaf-if)# vrf member tenant <WORD> vrf <WORD>
Description: Configure VRF parameters
Syntax:
member |
Set interface's VRF membership |
tenant |
Tenant |
WORD |
Tenant name |
vrf |
Virtual Routing and Forwarding instance |
WORD |
VRF name |
l3out |
(Optional) Enable VRF on one or more l3extOut |
WORD |
l3extOut Name |
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# interface ethernet <ifRange> (config-leaf-if)# vrf member tenant <WORD> vrf <WORD> [l3out] WORD
Description: Configure VRF information
Syntax:
member |
Set VRF membership |
tenant |
Tenant |
WORD |
Tenant name |
vrf |
VRF |
WORD |
VRF name |
Command Mode: router eigrp : Enhanced Interior Gateway Routing Protocol (EIGRP)
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# router eigrp default (config-eigrp)# vrf member tenant <WORD> vrf <WORD>
Description: Associate Router OSPF Policy with Tenant/VRF
Syntax:
member |
Set VRF membership |
tenant |
Tenant for the OSPF Policy |
WORD |
Tenant name |
vrf |
VRF |
WORD |
VRF name |
Command Mode: router ospf : Open Shortest Path First (OSPF and OSPF Version3)
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# router ospf default (config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD>
Description: Virtual Router Context
Syntax:
member |
Set BGP's VRF membership |
tenant |
Tenant for the BGP Policy |
WORD |
Tenant Name (Max Size 63) |
vrf |
Virtual Routing and Forwarding instance |
WORD |
VRF Name (Max Size 64) |
Command Mode: router bgp : Border Gateway Protocol (BGP)
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# router bgp <fabric-ASN> (config-bgp)# vrf member tenant <WORD> vrf <WORD>
Description: Configure a VShield in the VMware domain
Syntax:
arg |
Command Mode: vcenter : Configure a VCenter in the VMware domain
Command Path:
# configure [['terminal', 't']] (config)# vmware-domain <WORD> (config-vmware)# vcenter <> datacenter <WORD> [dvs-version <>] (config-vmware-vc)# vshield <>
Description: Configure VXLAN multicast pool.
Syntax:
multicast-pool |
multicast pool |
<ip-range> |
Multicast IP range |
Command Mode: configure-avs : Configure a VMware Domain as AVS (N1K) type
Command Path:
# configure [['terminal', 't']] (config)# vmware-domain <WORD> (config-vmware)# configure-avs (config-vmware-avs)# vxlan multicast-pool <ip-range>
Description: Configure VXLAN multicast pool.
Syntax:
<ip-range> |
Multicast IP range |
Command Mode: vshield : Configure a VShield in the VMware domain
Command Path:
# configure [['terminal', 't']] (config)# vmware-domain <WORD> (config-vmware)# vcenter <> datacenter <WORD> [dvs-version <>] (config-vmware-vc)# vshield <> (config-vmware-vc-vs)# vxlan multicast-pool <ip-range>
Description: Configure VXLAN pool.
Syntax:
<vxlan-range> |
VXLAN range |
Command Mode: vshield : Configure a VShield in the VMware domain
Command Path:
# configure [['terminal', 't']] (config)# vmware-domain <WORD> (config-vmware)# vcenter <> datacenter <WORD> [dvs-version <>] (config-vmware-vc)# vshield <> (config-vmware-vc-vs)# vxlan pool <vxlan-range>