The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Description: Set A user public key in PEM format.
Syntax:
LINE |
user public key in PEM format in quotes (Max Size None) |
Command Mode: ssh-key : Update ssh key for the user for ssh authentication
Command Path:
# configure [['terminal', 't']] (config)# username <WORD> (config-username)# ssh-key <WORD> (config-ssh-key)# data <LINE>
Description: Set PEM encoded certificate
Syntax:
CERTIFICATE |
PEM encoded certificate in quotes |
Command Mode: certificate : Create AAA user certificate in X.509 format.
Command Path:
# configure [['terminal', 't']] (config)# username <WORD> (config-username)# certificate <WORD> (config-certificate)# data <CERTIFICATE>
Description: Set the interval between hello packets from a neighbor before the router declares the neighbor as down
Syntax:
<1-65535> |
Interval in seconds. Number range from=1 to=65535 |
Command Mode: template ospf interface-policy : Configure OSPF Interface Policy Templates
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# template ospf interface-policy <WORD> tenant <WORD> (config-interface-policy)# dead-interval <NUMBER>
Description: Reset the log levels to default log level
Syntax:
<node-name> |
Node name |
<process> |
Process name |
Command Mode: exec : Exec Mode
Command Path:
# debug <node-name> <process> log reset
Description: Set log level for a topic
Syntax:
<node-name> |
Node name |
<process> |
Process name |
<topic> |
Topic name |
<level> |
Level name |
Command Mode: exec : Exec Mode
Command Path:
# debug <node-name> <process> log set <topic> <level>
Description: Decommission controller
Syntax:
<1-32> |
Controller ID. Number range from=1 to=32 |
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']] (config)# decommission controller <NUMBER>
Description: Decommission switch
Syntax:
<101-4000> |
Node ID. Number range from=101 to=4000 |
remove-from-controller |
(Optional) Remove the switch from controller (optional) |
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']] (config)# decommission switch <NUMBER> [remove-from-controller]
Description: Control origination of a default route
Syntax:
originate |
Originate a default route |
always |
(Optional) Always advertise default route |
Command Mode: vrf : Configure VRF information
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# router eigrp default (config-eigrp)# vrf member tenant <WORD> vrf <WORD> (config-eigrp-vrf)# default-information originate [always]
Description: Control origination of a default route
Syntax:
originate |
Originate a default route |
always |
(Optional) Always advertise default route |
Command Mode: vrf : Associate Router OSPF Policy with Tenant/VRF
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# router ospf default (config-leaf-ospf)# vrf member tenant <WORD> vrf <WORD> (config-leaf-ospf-vrf)# default-information originate [always]
Description: Originate a default toward this peer
Command Mode: neighbor : Configure a BGP neighbor
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# router bgp <fabric-ASN> (config-bgp)# vrf member tenant <WORD> vrf <WORD> (config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>] (config-leaf-bgp-vrf-neighbor)# default-originate
Description: Deploy micro-segmented AEPg on leaf
Syntax:
tenant |
Tenant hosting the AEPg to deploy |
WORD |
Tenant hosting the AEPg to deploy (Max Size 63) |
application |
Application hosting the AEPg to deploy |
WORD |
Application Name (Max Size 64) |
epg |
AEPg to be deployed on the leaf |
WORD |
EPg that uses the statically enabled Encap. (Max Size 64) |
micro-segmented |
micro-segmented AEPg |
Command Mode: leaf : Configure Leaf Node
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# deploy-epg tenant <WORD> application <WORD> epg <WORD> type micro-segmented
Description: Deploy regular AEPg on leaf
Syntax:
tenant |
Tenant hosting the AEPg to deploy |
WORD |
Tenant hosting the AEPg to deploy (Max Size 63) |
application |
Application hosting the AEPg to deploy |
WORD |
Application Name (Max Size 64) |
epg |
AEPg to be deployed on the leaf |
WORD |
EPg that uses the statically enabled Encap. (Max Size 64) |
<1-4094> |
Encapsulation Vlan. Number range from=1 to=4094 |
vlan-domain |
Vlan Domain for Encapsulation Vlan |
member |
Vlan Domain for Encapsulation Vlan |
WORD |
vlan-domain to use to validate encapsulation vlan. (Max Size 64) |
Command Mode: leaf : Configure Leaf Node
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# deploy-epg tenant <WORD> application <WORD> epg <WORD> vlan <NUMBER> vlan-domain member <WORD>
Description: Set zone deployment mode
Syntax:
WORD |
Zone Deployment Mode |
Command Mode: zone : Create zone policy
Command Path:
# configure [['terminal', 't']] (config)# zones (config-zones)# zone <WORD> (config-zone)# deployment-mode <WORD>
Description: RADIUS server descr for authentication
Syntax:
<WORD> |
descr for authentication (Max Size 128) |
Command Mode: radius-server host : RADIUS server's DNS name or its IP address
Command Path:
# configure [['terminal', 't']] (config)# radius-server host <A.B.C.D|A:B::C:D|WORD> (config-host)# descr <WORD>
Description: Add a description to a power supply redundancy policy
Syntax:
<description> |
Power supply redundancy policy description string |
Command Mode: power : Create a power supply redundancy policy
Command Path:
# configure [['terminal', 't']] (config)# power redundancy-policy <WORD> (config-power)# description <description>
Description: Set description
Syntax:
LINE |
Set description, use single quotes with spaces ex: 'my descr' (Max Size 128) |
Command Mode: rbac security-domain : Create AAA security domain for processing authentication requests.
Command Path:
# configure [['terminal', 't']] (config)# rbac security-domain <WORD> (config-security-domain)# description <LINE>
Description: The description of callhome destination-profile
Syntax:
WORD |
The description (Max Size 128) surrounded by single quotes |
Command Mode: destination-profile : Configure destination profile Parameters
Command Path:
# configure [['terminal', 't']] (config)# callhome common (config-callhome)# destination-profile (config-callhome-destnprof)# description <WORD>
Description: Add switch-group description
Syntax:
WORD |
Description string, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128) |
Command Mode: switch-group : Create switch firmware upgrade policy
Command Path:
# configure [['terminal', 't']] (config)# firmware (config-firmware)# switch-group <WORD> (config-firmware-switch)# description <WORD>
Description: Configure STP description
Syntax:
STRING |
Description |
Command Mode: region : STP MST region configuration mode
Command Path:
# configure [['terminal', 't']] (config)# spanning-tree mst configuration (config-stp)# region <WORD> (config-stp-region)# description <STRING>
Description: Description string, surrounded by single quotes if with spaces ex: 'My descr'
Syntax:
WORD |
Description string, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128) |
Command Mode: template dhcp relay : Create a DHCP Relay policy
Command Path:
# configure [['terminal', 't']] (config)# template dhcp relay policy <WORD> (config-template-dhcp-relay)# description <WORD>
Description: Update Policy-Group Template description
Syntax:
<description> |
Command Mode: template policy-group : Configure Policy Group Parameters
Command Path:
# configure [['terminal', 't']] (config)# template policy-group <WORD> (config-pol-grp-if)# description <description>
Description: Update Port-Channel Template description
Syntax:
<description> |
Command Mode: template port-channel : Configure Port-Channel Parameters
Command Path:
# configure [['terminal', 't']] (config)# template port-channel <WORD> (config-if)# description <description>
Description: Add a description string to a tenant, surrounded by single quotes if with spaces ex: 'My descr'
Syntax:
WORD |
Description string, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128) |
Command Mode: tenant : tenant configuration mode
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# description <WORD>
Description: Add a description on a contract, surrounded by single quotes if with spaces ex: 'My descr'
Syntax:
WORD |
Contract description, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128) |
Command Mode: contract : Configure binary contracts between Application EPGs
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# contract <WORD> [type <type>] (config-tenant-contract)# description <WORD>
Description: Add a description on a subject, surrounded by single quotes if with spaces ex: 'My descr'
Syntax:
WORD |
Subject description, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128) |
Command Mode: subject : Configuration a subject on the contract
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# contract <WORD> [type <type>] (config-tenant-contract)# subject <WORD> (config-tenant-contract-subj)# description <WORD>
Description: Add a description on a vrf, surrounded by single quotes if with spaces ex: 'My descr'
Syntax:
WORD |
VRF description, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128) |
Command Mode: vrf : Configuration for vrf
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# vrf context <WORD> (config-tenant-vrf)# description <WORD>
Description: Add a description on an application, surrounded by single quotes if with spaces ex: 'My descr'
Syntax:
WORD |
Description string, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128) |
Command Mode: application : application configuration mode
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# application <WORD> (config-tenant-app)# description <WORD>
Description: Add a description on an epg, surrounded by single quotes if with spaces ex: 'My descr'
Syntax:
WORD |
Description string, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128) |
Command Mode: epg : AEPg configuration mode
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# application <WORD> (config-tenant-app)# epg <WORD> [type <WORD>] (config-tenant-app-epg)# description <WORD>
Description: Add a description on an epg
Syntax:
<epgDescr> |
Command Mode: inband-mgmt : Enter Inside In-band management mode to modify inband properties or create new inband
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# inband-mgmt epg <WORD> (config-inb-epg)# description <epgDescr>
Description: Add a description on a bridge-domain, surrounded by single quotes if with spaces ex: 'My descr'
Syntax:
WORD |
Bridge-domain description, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128) |
Command Mode: interface : Configuration for interface bridge-domain
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# interface bridge-domain <WORD> (config-tenant-interface)# description <WORD>
Description: Add a description on an epg, surrounded by single quotes if with spaces ex: 'My descr'
Syntax:
WORD |
Description string, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128) |
Command Mode: external-l2 : L2 external EPG creation/configuration
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# external-l2 epg <WORD> (config-tenant-l2ext-epg)# description <WORD>
Description: Add a description on an epg
Syntax:
<epgDescr> |
Command Mode: oob-mgmt : Creates/Modify the out of band mgmt under the tenant mgmt
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# oob-mgmt epg <epgval> (config-oob-epg)# description <epgDescr>
Description: Description string, surrounded by single quotes if with spaces ex: 'My descr'
Syntax:
WORD |
Description string, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128) |
Command Mode: template dhcp relay : Create a DHCP Relay policy
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# template dhcp relay policy <WORD> (config-tenant-template-dhcp-relay)# description <WORD>
Description: Update igmp snooping policy description
Syntax:
LINE |
IGMP snooping policy description, use single quotes with spaces ex: 'my descr' (Max Size 128) |
Command Mode: template ip igmp snooping policy : Create an IGMP snooping policy
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# template ip igmp snooping policy <WORD> (config-tenant-template-ip-igmp-snooping)# description <LINE>
Description: Update Leaf Interface Profile description
Syntax:
LINE |
Leaf-If-Profile description, use single quotes with spaces ex: 'my descr' (Max Size 128) |
Command Mode: leaf-interface-profile : Create Leaf Interface Profile
Command Path:
# configure [['terminal', 't']] (config)# leaf-interface-profile <WORD> (config-leaf-if-profile)# description <LINE>
Description: Update Leaf Interface Group description
Syntax:
LINE |
Leaf-If-group description, use single quotes with spaces ex: 'my descr' (Max Size 128) |
Command Mode: leaf-interface-group : Configure Leaf Interface Group
Command Path:
# configure [['terminal', 't']] (config)# leaf-interface-profile <WORD> (config-leaf-if-profile)# leaf-interface-group <WORD> (config-leaf-if-group)# description <LINE>
Description: Update Leaf Profile description
Syntax:
LINE |
Leaf-Profile description, use single quotes with spaces ex: 'my descr' (Max Size 128) |
Command Mode: leaf-profile : Configure Leaf Profile
Command Path:
# configure [['terminal', 't']] (config)# leaf-profile <WORD> (config-leaf-profile)# description <LINE>
Description: Update Leaf Group description
Syntax:
LINE |
Leaf-group description, use single quotes with spaces ex: 'my descr' (Max Size 128) |
Command Mode: leaf-group : Configure Leaf Group
Command Path:
# configure [['terminal', 't']] (config)# leaf-profile <WORD> (config-leaf-profile)# leaf-group <WORD> (config-leaf-group)# description <LINE>
Description: Update Fex Profile description
Syntax:
LINE |
Fex-Profile description, use single quotes with spaces ex: 'my descr' (Max Size 128) |
Command Mode: fex-profile : Configure Fex Profile
Command Path:
# configure [['terminal', 't']] (config)# fex-profile <WORD> (config-fex-profile)# description <LINE>
Description: Update Fex Interface Group description
Syntax:
LINE |
Fex-If-group description, use single quotes with spaces ex: 'my descr' (Max Size 128) |
Command Mode: fex-interface-group : Configure Fex Interface Group
Command Path:
# configure [['terminal', 't']] (config)# fex-profile <WORD> (config-fex-profile)# fex-interface-group <WORD> (config-fex-if-group)# description <LINE>
Description: Update interface vlan description
Syntax:
LINE |
interface vlan description, use single quotes with spaces ex: 'my descr' (Max Size 128) |
Command Mode: interface vlan : Vlan interface
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# interface vlan <1-4094> (config-leaf-if)# description <LINE>
Description: Update Interface description
Syntax:
LINE |
Interface description, use single quotes with spaces ex: 'my descr' (Max Size 128) |
Command Mode: interface ethernet : Ethernet IEEE 802.3z
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# interface ethernet <ifRange> (config-leaf-if)# description <LINE>
Description: Update Port-Channel description
Syntax:
LINE |
Port-Channel description, use single quotes with spaces ex: 'my descr' (Max Size 128) |
Command Mode: interface port-channel : Port Channel interface
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# interface port-channel <WORD> [fex <fex>] (config-leaf-if)# description <LINE>
Description: Update VPC description
Syntax:
LINE |
VPC description, use single quotes with spaces ex: 'my descr' (Max Size 128) |
Command Mode: interface : Provide VPC Name
Command Path:
# configure [['terminal', 't']] (config)# vpc context leaf <101-4000> <101-4000> [fex <fex>] (config-vpc)# interface vpc <WORD> [fex <fex>] (config-vpc-if)# description <LINE>
Description: Add description to the session
Syntax:
LINE |
Session description, use single quotes with spaces ex: 'my descr' (Max Size 128) |
Command Mode: monitor access : Configue monitor session for access interfaces
Command Path:
# configure [['terminal', 't']] (config)# monitor access session <session_name> (config-monitor-access)# description <LINE>
Description: Add description to the session
Syntax:
LINE |
Session description, use single quotes with spaces ex: 'my descr' (Max Size 128) |
Command Mode: monitor fabric : Configue monitor session for fabric interfaces
Command Path:
# configure [['terminal', 't']] (config)# monitor fabric session <session_name> (config-monitor-fabric)# description <LINE>
Description: Add description to the session
Syntax:
LINE |
Session description, use single quotes with spaces ex: 'my descr' (Max Size 128) |
Command Mode: monitor tenant : Configue monitor session for tenant EPGs
Command Path:
# configure [['terminal', 't']] (config)# monitor tenant <tenant_name> session <session_name> (config-monitor-tenant)# description <LINE>
Description: Add description to the session
Syntax:
LINE |
Session description, use single quotes with spaces ex: 'my descr' (Max Size 128) |
Command Mode: monitor virtual : Configure monitor session for virtual switches
Command Path:
# configure [['terminal', 't']] (config)# monitor virtual session <WORD> (config-monitor-virtual)# description <LINE>
Description: Configure schedule description
Syntax:
STRING |
Scheduler description |
Command Mode: scheduler : Scheduler configuration mode
Command Path:
# configure [['terminal', 't']] (config)# scheduler fabric|controller schedule <WORD> (config-scheduler)# description <STRING>
Description: Add description for this server-group
Syntax:
WORD |
Description (Max Size 128) surrounded by single quotes |
Command Mode: logging : Logging server group configuration mode
Command Path:
# configure [['terminal', 't']] (config)# logging server-group <WORD> (config-logging)# description <WORD>
Description: Add zone description
Syntax:
WORD |
Description string, surrounded by single quotes if with spaces ex: 'My descr' (Max Size 128) |
Command Mode: zone : Create zone policy
Command Path:
# configure [['terminal', 't']] (config)# zones (config-zones)# zone <WORD> (config-zone)# description <WORD>
Description: Configure destination profile Parameters
Command Mode: callhome : Callhome common policy configuration mode
Command Path:
# configure [['terminal', 't']] (config)# callhome common (config-callhome)# destination-profile
Description: Configure destination Parameters
Syntax:
WORD |
The name (Max Size 64) |
Command Mode: destination-profile : Configure destination profile Parameters
Command Path:
# configure [['terminal', 't']] (config)# callhome common (config-callhome)# destination-profile (config-callhome-destnprof)# destination <WORD>
Description: Configure monitor remote destination
Syntax:
tenant |
tenant |
tenant_name |
tenant name (Max Size 63) |
application |
application |
application_name |
application name |
epg |
epg |
epg_name |
epg name |
destination-ip |
destination IP |
A.B.C.D |
IP address |
source-ip-prefix |
source IP prefix |
A.B.C.D/M |
IP adddress prefix |
Command Mode: monitor fabric : Configue monitor session for fabric interfaces
Command Path:
# configure [['terminal', 't']] (config)# monitor fabric session <session_name> (config-monitor-fabric)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>
Description: Configure monitor remote destination
Syntax:
tenant |
tenant |
tenant_name |
tenant name (Max Size 63) |
application |
application |
application_name |
application name (Max Size 64) |
epg |
epg |
epg_name |
epg name (Max Size 64) |
destination-ip |
destination IP |
A.B.C.D |
IP address |
source-ip-prefix |
source IP prefix |
A.B.C.D/M |
IP adddress prefix |
Command Mode: monitor tenant : Configue monitor session for tenant EPGs
Command Path:
# configure [['terminal', 't']] (config)# monitor tenant <tenant_name> session <session_name> (config-monitor-tenant)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>
Description: Configure monitor remote destination
Syntax:
A.B.C.D |
Destination IP address |
Command Mode: monitor virtual : Configure monitor session for virtual switches
Command Path:
# configure [['terminal', 't']] (config)# monitor virtual session <WORD> (config-monitor-virtual)# destination destip <A.B.C.D>
Description: Configure monitor local destination
Syntax:
ethernet |
ethernet |
<ethernet> |
<ethernet> |
leaf |
leaf |
<leaf Id> |
leaf Id |
Command Mode: monitor access : Configue monitor session for access interfaces
Command Path:
# configure [['terminal', 't']] (config)# monitor access session <session_name> (config-monitor-access)# destination interface ethernet <ethernet> leaf <leaf Id>
Description: Configure monitor remote destination
Syntax:
tenant_name |
tenant name (Max Size 63) |
application |
application |
application_name |
application name (Max Size 64) |
epg |
epg |
epg_name |
epg name (Max Size 64) |
destination-ip |
destination IP |
A.B.C.D |
IP address |
source-ip-prefix |
source IP prefix |
A.B.C.D/M |
IP adddress prefix |
Command Mode: monitor access : Configue monitor session for access interfaces
Command Path:
# configure [['terminal', 't']] (config)# monitor access session <session_name> (config-monitor-access)# destination tenant <tenant_name> application <application_name> epg <epg_name> destination-ip <A.B.C.D> source-ip-prefix <A.B.C.D/M>
Description: Configure monitor local destination
Syntax:
WORD |
tenant name (Max Size 63) |
application |
application |
WORD |
application name (Max Size 64) |
epg |
epg |
WORD |
epg name (Max Size 64) |
mac |
mac |
E.E.E |
MAC address (Option 1) |
EE-EE-EE-EE-EE-EE |
MAC address (Option 2) |
EE:EE:EE:EE:EE:EE |
MAC address (Option 3) |
EEEE.EEEE.EEEE |
MAC address (Option 4) |
Command Mode: monitor virtual : Configure monitor session for virtual switches
Command Path:
# configure [['terminal', 't']] (config)# monitor virtual session <WORD> (config-monitor-virtual)# destination tenant <WORD> application <WORD> epg <WORD> mac E.E.E|EE-EE-EE-EE-EE-EE|EE:EE:EE:EE:EE:EE|EEEE.EEEE.EEEE
Description: Add or modify an existing DHCP option when relayed from the server to the client
Syntax:
WORD |
Name of the option to add (Max Size 64) |
id |
ID of the option |
<0-255> |
ID of the option. Number range from=0 to=255 |
data |
Body of the Option TLV as hex string |
WORD |
Body of the Option TLV as hex string, surrounded by single quotes ex: 'foo*' (Max Size 256) |
Command Mode: interface : Configuration for interface bridge-domain
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# interface bridge-domain <WORD> (config-tenant-interface)# dhcp option <WORD> id <NUMBER> data <WORD>
Description: Associate the BD with a DHCP Relay policy
Syntax:
tenant |
Select DHCP policies from current Tenant |
infra |
Select DHCP policy from infra |
WORD |
Name of the DHCP relay policy (Max Size 64) |
WORD |
(Optional) Name of the DHCP option policy (Max Size 64) |
Command Mode: interface : Configuration for interface bridge-domain
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# interface bridge-domain <WORD> (config-tenant-interface)# dhcp relay policy tenant|infra <WORD> [option <WORD>]
Description: Set the DH parameter used for HTTPS communication service
Syntax:
dhparam |
DH Param as comma separated values like val1,val2,..valN |
Command Mode: https : HTTPS communication policy group
Command Path:
# configure [['terminal', 't']] (config)# comm-policy <WORD> (config-comm-policy)# https (config-https)# dhparam <dhparam>
Description: Monitor direction
Syntax:
both |
both |
rx |
rx |
tx |
tx |
Command Mode: source interface ethernet : Configure monitor for ethernet access interfaces
Command Path:
# configure [['terminal', 't']] (config)# monitor access session <session_name> (config-monitor-access)# source interface ethernet <ethernet> leaf <leaf Id> (config-monitor-access-source)# direction both|rx|tx
Description: Monitor direction
Syntax:
both |
both |
rx |
rx |
tx |
tx |
Command Mode: source interface port-channel : Configure monitor for port-channel interfaces
Command Path:
# configure [['terminal', 't']] (config)# monitor access session <session_name> (config-monitor-access)# source interface port-channel <port-channel list> leaf <leaf Id> [fex <fex Id>] (config-monitor-access-source)# direction both|rx|tx
Description: Monitor direction
Syntax:
both |
both |
rx |
rx |
tx |
tx |
Command Mode: source interface vpc : Configure monitor for VPC interfaces
Command Path:
# configure [['terminal', 't']] (config)# monitor access session <session_name> (config-monitor-access)# source interface vpc <vpc list> leaf <leaf Id1> <leaf Id2> [fex <fex Ids>] (config-monitor-access-source)# direction both|rx|tx
Description: Monitor direction
Syntax:
both |
both |
rx |
rx |
tx |
tx |
Command Mode: source interface ethernet : Configure monitor for ethernet fabric interfaces
Command Path:
# configure [['terminal', 't']] (config)# monitor fabric session <session_name> (config-monitor-fabric)# source interface ethernet <ethernet> switch <switch Id> (config-monitor-fabric-source)# direction both|rx|tx
Description: Monitor direction
Syntax:
both |
both |
rx |
rx |
tx |
tx |
Command Mode: source application : Configure EPG as monitor source
Command Path:
# configure [['terminal', 't']] (config)# monitor tenant <tenant_name> session <session_name> (config-monitor-tenant)# source application <application_name> epg <epg_name> (config-monitor-tenant-source)# direction both|rx|tx
Description: Configure monitor source direction
Syntax:
both |
both |
rx |
rx |
tx |
tx |
Command Mode: source : Configure monitor virtual source
Command Path:
# configure [['terminal', 't']] (config)# monitor virtual session <WORD> (config-monitor-virtual)# source tenant <WORD> application <WORD> epg <WORD> [mac <E.E.E EE-EE-EE-EE-EE-EE EE:EE:EE:EE:EE:EE EEEE.EEEE.EEEE >] (config-monitor-virtual-source)# direction both|rx|tx
Description: Disable check for directly connected peer
Command Mode: neighbor : Configure a BGP neighbor
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# router bgp <fabric-ASN> (config-bgp)# vrf member tenant <WORD> vrf <WORD> (config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>] (config-leaf-bgp-vrf-neighbor)# disable-connected-check
Description: Disable checking of peer AS-number while advertising
Command Mode: neighbor : Configure a BGP neighbor
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# router bgp <fabric-ASN> (config-bgp)# vrf member tenant <WORD> vrf <WORD> (config-leaf-bgp-vrf)# neighbor A.B.C.D|A.B.C.D/LEN|A:B::C:D|A:B::C:D/LEN [l3out <WORD>] (config-leaf-bgp-vrf-neighbor)# disable-peer-as-check
Description: Set OSPF Policy Preferred Administrative Distance
Syntax:
<1-255> |
Distance Value. Number range from=1 to=255 |
Command Mode: template ospf vrf-policy : Configure Router OSPF Timer Policy Templates
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# template ospf vrf-policy <WORD> tenant <WORD> (config-vrf-policy)# distance <NUMBER>
Description: Configure BGP Address Family Distance Properties
Syntax:
<1-255> |
The administrative distance of eBGP routes. Number range from=1 to=255 |
<1-255> |
The administrative distance of iBGP routes. Number range from=1 to=255 |
<1-255> |
The administrative distance of local routes. Number range from=1 to=255 |
Command Mode: template bgp address-family : Configure Router BGP Address Family Templates
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# template bgp address-family <WORD> tenant <WORD> (config-bgp-af)# distance <NUMBER> <NUMBER> <NUMBER>
Description: Set EIGRP adminstrative distances
Syntax:
<1-255> |
The administrative distance preference for internal routes. Number range from=1 to=255 |
<1-255> |
The administrative distance preference for external routes. Number range from=1 to=255 |
Command Mode: template eigrp vrf-policy : Configure EIGRP VRF policy templates
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# template eigrp vrf-policy <WORD> tenant <WORD> (config-template-eigrp-vrf-pol)# distance <NUMBER> <NUMBER>
Description: Set EIGRP adminstrative distances
Syntax:
<1-255> |
The administrative distance preference for internal routes. Number range from=1 to=255 |
<1-255> |
The administrative distance preference for external routes. Number range from=1 to=255 |
Command Mode: address-family : EIGRP Policy Address Family
Command Path:
# configure [['terminal', 't']] (config)# leaf <101-4000> (config-leaf)# router eigrp default (config-eigrp)# vrf member tenant <WORD> vrf <WORD> (config-eigrp-vrf)# address-family ipv4|ipv6 unicast (config-address-family)# distance <NUMBER> <NUMBER>
Description: Configure default dns policy
Command Mode: configure : Configuration Mode
Command Path:
# configure [['terminal', 't']] (config)# dns
Description: Add a DNS policy to the VRF
Syntax:
label |
Dns policy to apply |
WORD |
Dns policy to apply (Max Size 64) |
Command Mode: vrf : Configuration for vrf
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# vrf context <WORD> (config-tenant-vrf)# dns label <WORD>
Description: Add DNS search suffix
Syntax:
suffix |
suffix |
Command Mode: microsoft : Configure static ip pool
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# application <WORD> (config-tenant-app)# epg <WORD> [type <WORD>] (config-tenant-app-epg)# microsoft static-ip-pool <name> gateway <gwAddress> (config-tenant-app-epg-ms-ip-pool)# dnssearchsuffix <suffix>
Description: Add dns servers
Syntax:
DNS server list |
DNS server list |
Command Mode: microsoft : Configure static ip pool
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# application <WORD> (config-tenant-app)# epg <WORD> [type <WORD>] (config-tenant-app-epg)# microsoft static-ip-pool <name> gateway <gwAddress> (config-tenant-app-epg-ms-ip-pool)# dnsservers <DNS server list>
Description: Add dns suffix
Syntax:
suffix |
suffix |
Command Mode: microsoft : Configure static ip pool
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# application <WORD> (config-tenant-app)# epg <WORD> [type <WORD>] (config-tenant-app-epg)# microsoft static-ip-pool <name> gateway <gwAddress> (config-tenant-app-epg-ms-ip-pool)# dnssuffix <suffix>
Description: Create the AAA domain to which the user belongs.
Syntax:
WORD |
Domain for the user |
Command Mode: username : Create a locally-authenticated user account
Command Path:
# configure [['terminal', 't']] (config)# username <WORD> (config-username)# domain <WORD>
Description: Configure the domains for dns servers
Syntax:
WORD |
Domain in the format ^([a-zA-Z]|[a-zA-Z][a-zA-Z0-9]|[a-zA-Z][a-zA-Z0-9-.]{0,253}[a-zA-Z0-9])$ |
default |
(Optional) Set the default domain for dns servers |
Command Mode: dns : Configure default dns policy
Command Path:
# configure [['terminal', 't']] (config)# dns (config-dns)# domain <WORD> [default]
Description: Configure DSR VIP For a L4-L7 Graph Connector.
Syntax:
WORD |
Enter VIP address (Max Size None) |
Command Mode: connector : Configure Connector for a Service Node
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# l4l7 graph <WORD> [contract <contract-option>] (config-graph)# service <WORD> [device-cluster-tenant <WORD>] [device-cluster <WORD>] [mode <Available Modes>] (config-service)# connector <WORD> [cluster-interface <WORD>] (config-connector)# dsr-vip <WORD>
Description: Add a DSR virtual IP address
Syntax:
virtual-ip-address |
Virtual IP address of load balancer |
<address> |
IP address |
description |
(Optional) description |
Command Mode: epg : AEPg configuration mode
Command Path:
# configure [['terminal', 't']] (config)# tenant <WORD> (config-tenant)# application <WORD> (config-tenant-app)# epg <WORD> [type <WORD>] (config-tenant-app-epg)# dsr virtual-ip-address <address> [description <description>]