Cisco IWAN Application on APIC-EM User Guide, Release 1.3.2
New and Changed Information
View with Adobe Reader on a variety of devices
This chapter contains the following section:
The following table summarizes new and changed features in the Cisco IWAN application,release 1.3.2.
Table 1-1 New and Changed Information for Release 1.3.2
IWAN App Separation
Decoupling the release schedule and release numbering of the IWAN application and Cisco APIC-EM. The IWAN app is now downloaded separately and installed into APIC-EM.
3-link single-branch support
Support for 3-link single-branch topology when provisioning day 0 branch sites.
Adding and Provisioning Greenfield Devices to the Branch Site
Adding and Provisioning Brownfield Devices to the Branch Site
Selectable WAN link speeds
When configuring WAN settings for a branch site, can configure a specific download speed for Gigabit Ethernet and 10 Gigabit Ethernet interfaces.
Service Assurance on demand
Enables refreshing the “Service Assurance” network alarm status at any time, using a Refresh button. The IWAN app requests network connectivity status from the IWAN network and refreshes the status of any network alarms.
Service Assurance: Network Connectivity Alarms
Support for ASR 1006-X as hub and master controller
Support for the Cisco ASR 1006-X router as a hub or dedicated master controller.
32 GB memory support
The minimum RAM requirement for running the IWAN app on APIC-EM in a virtual machine environment was reduced from 64 GB to 32 GB.