Terminology

The terminology used in Version 5.4.1.8 may differ from the terminology used in previous releases. For more information, see the Firepower Compatibility Guide.

 

Tip: Cisco documentation may refer to the Defense Center as the FireSIGHT Management Center. The Defense Center and the FireSIGHT Management Center are the same appliance.

Changed Functionality

The following functionality is changed for Version 5.4.1.8

■You can now force 8000 Series stacked devices into maintenance mode when any member of the stack fails. For more information, contact Support. (CSCuy92530)

Features and Functionality Introduced in Previous Versions

Version 5.4.1.1

Dedicated AMP Appliances

Version 5.4 introduces a new Series 3 FirePOWER managed devices designed with additional processing power to maximize the performance of the FireSIGHT System’s AMP features. The AMP8050 is a 81xx Family device with support for Netmods and includes the additional storage necessary to function as a dedicated AMP appliance. The AMP8350 is an 83xx Family device also with support for Netmods and the additional storage required for AMP functionality. The AMP8350 model can be used as a stacked unit with the AMP8360, AMP8370, and AMP8390, for 2, 3, and 4 stacks, respectively.

Version 5.4.1

FirePOWER Services Management Capabilities

Centralized Management of Cisco ASA5506-X with FirePOWER Services

The Defense Center is now able to manage FirePOWER Services (ASA FirePOWER devices) implementations running on ASA5506-X devices in the same way it does on all of the other ASA5500-X devices. This enables the management of multiple ASA5506-X devices running ASA FirePOWER devices from a single Defense Center, as long as the ASA platform is running Version 9.3.2.2 or later and the ASA FirePOWER device is running Version 5.4.1 or later. Administrators will be able to configure intrusion detection and prevention policies, advanced malware protection, application control, user and group control, file control, and URL filtering and then apply those configurations to multiple ASA5506-X devices all at once. In addition, Defense Centers provide critical dashboards, event views, alerting capabilities, and reporting from all of your ASA FirePOWER devices in a single view.

Direct Management of Cisco ASA5506-X with FirePOWER Services

Cisco’s Adaptive Security Device Manager (ASDM) can be used to perform the same ASA FirePOWER management functions listed above, but only on one ASA5506-X device at a time. In addition, you can manage system policies, licensing, and back up and restore directly.

Management Limitations of Cisco ASA with FirePOWER Services

At the current time, the Cisco ASA FirePOWER product consists of two different products tightly integrated with each other: the ASA Firewall and the FirePOWER Next-Generation Intrusion Prevention System (NGIPS). Whereas critical data sharing between the two has been accomplished, a unified management platform is still in development.

For this reason, the Cisco ASA functionality is currently managed through the Cisco Security Manager (CSM) or the Adaptive Security Device Manager (ASDM), and the FirePOWER Services functionality is managed through the Cisco Defense Center. As a result, the Defense Center does not support any of the following capabilities:

■Cisco ASA hardware-based features, including clustering, stacking, switching, routing, virtual private networks (VPN), and network address translation (NAT).

■Configuring ASA interfaces. In addition, when FirePOWER Services are deployed in SPAN port mode, any ASA interfaces that have been configured will not be displayed.

■Shutting down, restarting or otherwise managing ASA processes.

■Creating or restoring backups from ASA devices.

■Writing access control rules to match traffic using VLAN tag conditions.

Note: The ASA platform provides these features, configured using the ASA command line interface (CLI) and ASDM. For more information, see the ASA FirePOWER module documentation.

Platform Enhancements

VMware Tool Support

You can now use VMware Tools with FireSIGHT System virtual appliances. This enhances compatibility with the VMware environment and improves management of virtual devices by enabling soft power down, migration, and other virtual specific capabilities. VMware tools are supported on:

■64-bit Virtual Defense Center

■64-bit Virtual managed device

Note: As of Version 5.4 of the FireSIGHT System, the system supports ESXi version 5.0, 5.1, and 5.5.

Support for VMXNET3 Interfaces in VMware Virtual Appliances

VMXNET3 interface types are now supported on virtual devices. This allows you to use high-speed network interfaces, up to 10Gbits/s.

Multiple Management Interfaces

You can now use multiple management interface ports on Series 3 Defense Centers, FirePOWER (Series 3) managed devices, and virtual Defense Centers. You can set one interface for management traffic and another interface for event traffic. This improves deployment options in some environments.

Series 3 Support

Version 5.4 introduces the 3D7050 as a 70xx Family device with a dual core quad thread processor, 8GB of RAM, and a 80GB hard drive.

LACP Support

FirePOWER (Series 3) devices are now able to take part in Link Aggregation Control Protocol (LACP) (IEEE 802.3ad) negotiation to aggregate multiple links together into one. This allows both link redundancy and bandwidth sharing.

Defense Center 2000 (DC2000)

The DC2000 is a new Defense Center appliance platform that offers double the performance and capacity of the DC1500.

Defense Center 4000 (DC4000)

The DC4000 is a new Defense Center appliance platform that offers double the performance and capacity of the DC3500.

International Compatibility Enhancements

Unicode Support

The system now displays the names of files detected through file detection, malware detection, and FireAMP file events. This allows the display of non-Western characters, including those that are double-byte encoded.

Geolocation and Security Intelligence Data in Correlation Rules

The correlation rules engine has been updated to make connection, geolocation, and Security Intelligence data available. This allows you to generate correlated events or take correlated actions based on these two new constraints. For example, if an Impact 1 intrusion event is detected from a specific country, you can set up an alert to log that information to an external syslog server.

Support for Private FireAMP Cloud

With Version 5.4, you can use a private FireAMP cloud rather than the Cisco public cloud. This requires installation of a private cloud virtual appliance. The private cloud mediates interactions with the public cloud so you can gather collected threat information from the public cloud without exposing information from your network.

The following features and functionality were updated in Version 5.4:

Detection and Security Enhancements

Integrated SSL Decryption

FirePOWER (Series 3) devices can now identify SSL communications and decrypt the traffic before applying attack, application, and malware detection. You can use SSL decryption in any of the supported Series 3 device deployment modes, including inline and passive. SSL policies control characteristics of SSL in use within the enterprise, with SSL rules to exert granular control over encrypted traffic logging and handling.

Simplified Normalization and Preprocessor Configuration

You now configure traffic normalization and preprocessing in the access control policy, rather than the intrusion policy. This simplifies configuration, especially for new users. The sensitive data preprocessor, rule states, alerting, and event thresholds can still be configured at an individual intrusion policy level.

New file_type Keyword in the Snort Rule Language

A new file_type keyword is available in the Snort rules language that enables the specification of a file type for detection. This is a streamlined alternative to the existing flowbits -driven method.

Expanded IoC support from FireAMP Connectors

The list of Indicators of Compromise (IoC) provided by FireAMP is now dynamic and data-driven. As new IoCs become available, they are automatically supported by the Defense Center. This enhances the IoC correlation capability in any deployment where FireAMP is used.

Protected Rule Content

A new capability of the Snort rule language is available for use in high-security environments. You can now create a Snort content match using hashed data. This allows the rule writer to specify what content to search for, but never exposes the content in plain text.

Previously Changed Functionality

The following functionality was introduced in Version 5.4.0.7 and 5.4.1.6:

■SCADA preprocessor now supports processing Common Industrialist Protocol (CIP) traffic. CIP configuration is not enabled by default. For more information, see the Configuring SCADA Preprocessing section of the FireSIGHT System User guide. (CSCux85466, CSCuy08100, CSCuy08741)

The following functionality was introduced in Version 5.4.0.6 and 5.4.1.5:

■If the system detects a URL and cannot categorize the requested URL from prior lookup results, the system attempts a secondary URL lookup method. If the URL cannot be categorized within two seconds using the secondary URL lookup method, the system assigns the URL the Uncategorized category and processes the URL.

■The SMTP preprocessor now generates an alert for multi-line authentication command overflow attempts.

■The system now restricts reassembly of packets once the system reaches the max HTTP server flow depth and decreases latency in traffic processing.

The following functionality was introduced in Version 5.4.0.5 and Version 5.4.1.4:

■VLAN tags are now limited to integers between 0 and 4095.

■The system now supports matching SSL traffic on all port values, including values 32,768 and larger.

If the system detects a URL and cannot categorize the requested URL from prior lookup results, the system attempts a secondary URL lookup method. If the URL can not be categorized within two seconds using the secondary URL lookup method, the system assigns the URL the Uncategorized category and processes the URL.

The following functionality was introduced in Version 5.4.0.3 and Version 5.4.1.2:

■You must apply the same access control policy to all devices that you plan to stack or cluster before you configure the stack or cluster except in cases where an applied configuration requires the Snort process to restart. See the How Snort Restarts Affect Traffic section in the FireSIGHT System User Guide.

■You are now able to choose to inspect traffic during policy apply to prevent network disruption.

■The system no longer reports the discovery event status to the Health Policy page.

■You can now create an access control policy that references either an access control rule network condition set to block all IPv6 addresses with ::/0 or a network rule set to block all IPv4 addresses with 0.0.0.0/0 is now supported.

■The system now reports an event for all CPU reports when CPU usage changes from a high level to a normal state.

The following functionality was introduced in Version 5.4.0.2 and Version 5.4.1.1:

■The system now clears all intrusion policy locks when you upload intrusion rules or install intrusion rule updates.

The following functionality was introduced in Version 5.4.1:

■Registered ASA devices now have configurable advanced options on the Advanced tab of the Device Management page (Devices > Device Management).

■The show users CLI command is now supported on ASA devices.

■You can configure alerts only for retrospective events or network-based malware events from the Advanced Malware Protections Alerts tab on the Alerts page.

The following features and functionality were updated in Version 5.4:

■You can now view VLAN tags for connection events in the event viewer (Analysis > Connections > Events).

■The system now identifies login attempts over the FTP, HTTP, and MDNS protocols.

■You can now select archived connection events separately from discovery events for transmission to the eStreamer client.

■The Discovery Event Health Monitor is no longer available in health policies.

■Expand Packet View, previously available in Version 4.10.x, is now a configurable option in Version 5.4 via the Event View Settings tab (Admin > User Preferences > Event View Settings).

■Importing a custom intrusion rule as an .rtf file now generates an Invalid Rules File 'rtf_rule.rtf': Must be a plain text file that is ASCII or UTF-8 encoded warning.

■You can now generate the following intrusion event performance graphs via the Intrusion Event Graphs page (Overview > Summary > Intrusion Event Graphs):

–ECN Flags Normalized in TCP Traffic/Packet

–ECN Flags Normalized in TCP Traffic/Session

–ICMPv4 Echo Normalizations

–ICMPv6 Echo Normalizations

–IPv4 DF Flag Normalizations

–IPv4 Options Normalizations

–IPv4 Reserved Flag Normalizations

–IPv4 Resize Normalizations

–IPv4 TOS Normalizations

–IPv4 TTL Normalizations

–IPv6 TTL Normalizations

–IPv6 Options Normalizations

–TCP Header Padding Normalizations

–TCP No Option Normalizations

–TCP NS Flag Normalizations

–TCP Options Normalizations

–TCP Packets Blocked by Normalization

–TCP Reserved Flags Normalizations

–TCP Segment Reassembly Normalizations

–TCP SYN Option Normalizations

–Total TCP Filtered Packets

–TCP Timestamp ECR Normalizations

–Total UDP Filtered Packets

–TCP Urgent Flag Normalizations

■You can now configure the HTTP Referrer and User Agent fields in the Connection Events table view and the Security Intelligence Events table view when configuring the displayed columns.

■You can now view warnings associated with the individual rules of your access control policy via the Access Control Policy page (Policies > Access Control). In the access control policy editor, view a warning by hovering your pointer over the alert icon next to the rule name and reading the warning in the tooltip text, or by selecting the Show Warnings button at the top of the page to view the warnings associated with all the rules referenced in your access control policy.

■In Version 5.4, inline normalization is automatically enabled when you create a network analysis policy with Inline Mode enabled. In previous versions, you had to manually enable inline normalization in your inline intrusion policies. Note that the update from Version 5.3.x to Version 5.4 does not change your inline normalization settings.

■You can now add access control rule port conditions that specify unassigned protocol numbers not included in the Protocol drop-down list.

■You no longer need a secondary rule to control FTP Data Channel in your access control policy.

■The new Decompress SWF File (LZMA), Decompress SWF File (Deflate), and Decompress PDF File (Default) HTTP Inspect preprocessor options offer enhanced decompression support for PDF and SWF file content.

■The TCP stream preprocessor now has enhanced protocol-awareness for SMTP, POP3, and IMAP.

■The system now provides enhanced detection of information in application traffic, including detection of application data in DNS traffic and detection of users in additional protocols.

■You can now configure LDAP authentication to use Common Access Cards (CACs) to associate the card with a user name so a user can log directly into the system using the card.

■The system now offers enhanced GPRS Tunneling Protocol (GTP) support.

Configuration and Event Backup Guidelines

Before you begin the update, Cisco strongly recommends that you delete or move any backup files that reside on your appliance, then back up current event and configuration data to an external location.

Use the Defense Center to back up event and configuration data for itself and the devices it manages. For more information on the backup and restore feature, see the FireSIGHT System User Guide.

Note: The Defense Center purges locally stored backups from previous updates. To retain archived backups, store the backups externally.

Caution: BIOS Version 2.0.1b must be running on DC2000 and DC4000 appliances in order to update to version 5.4.1.1 and later. If updating your appliances fails due to an incompatible BIOS version, contact Support.

Caution: Prior to updating an ASA FirePOWER module running FirePOWER Services or a Cisco ASA managed by ASDM, set the device clock to the correct time. If an ASA device clock is set to the incorrect time before updating, the Access Control Licensing page does not load.

Traffic Flow and Inspection During the Update

The update process reboots managed devices and might restart the Snort process. Depending on how your devices are configured and deployed, the following capabilities could be affected

■traffic inspection, including application awareness and control, user control, URL filtering, Security Intelligence, intrusion detection and prevention, and connection logging

■traffic flow, including switching, routing, NAT, VPN, and related functionality

■link state

Note that when you update clustered 7000 or 8000 Series devices or device stacks, the system performs the update one device at a time to avoid traffic interruption. When you update clustered devices, apply the update one device at a time, allowing the update to complete before updating the second device.

The following table explains how Snort restarts affect traffic inspection. It is reasonable to anticipate that the product update could affect traffic similarly.

 

Link State

In 7000 Series and 8000 Series inline deployments with Bypass enabled, network traffic is interrupted at two points during the update:

■At the beginning of the update process, traffic is briefly interrupted while link goes down and up (flaps) and the network card switches into hardware bypass. Traffic is not inspected during hardware bypass.

■After the update finishes, traffic is again briefly interrupted while link flaps, and the network card switches out of bypass. After the endpoints reconnect and reestablish link with the sensor interfaces, traffic is inspected again.

Note: The configurable Bypass option is not supported on NGIPSv devices, Cisco ASA with FirePOWER Services, non-bypass NetMods on 8000 Series devices, or SFP transceivers on 71xx Family devices.

Switching and Routing

Series 3 devices do not perform switching, routing, NAT, VPN, or related functions during the update. If you configured your devices to perform only switching and routing, network traffic is blocked throughout the update.

Audit Logging During the Update

When updating appliances that have a web interface, after the system completes its pre-update tasks and the streamlined update interface page appears, login attempts to the appliance are not reflected in the audit log until the update process is complete and the appliance reboots.

Version Requirements for Updating to Version 5.4.1.8

To update to Version 5.4.1.8, a Defense Center must be running at least Version 5.4. Defense Centers running Version 5.4.1.1 and later can manage devices running Version 5.4.0.9 and Version 5.4.1.8. If you are running an earlier version, you can obtain updates from the Support site.

Caution: BIOS Version 2.0.1b must be running on DC2000 and DC4000 appliances in order to update to version 5.4.1.1 or later. If updating your appliances fails due to an incompatible BIOS version, contact Support.

Cisco ASA with FirePOWER Services (ASA5506-X, ASA5506W-X, ASA5506H-X, ASA5508-X, and ASA5516-X) must be running at least Version 5.4.1 to update to Version 5.4.1.8. The ISA3000 device must be running Version 5.4.1.7 to update to Version 5.4.1.8.

The closer your device’s or ASA module’s current version to the release version, the less time the update takes.

Time and Disk Space Requirements for Updating toVersion 5.4.1.8

The table below provides disk space and time guidelines for the Version 5.4.1.8 update. Note that when you use the Defense Center to update a managed device, the Defense Center requires additional disk space on its /Volume partition.

Caution: Do not restart the update or reboot your appliance at any time during the update process. Cisco provides time estimates as a guide, but actual update times vary depending on the appliance model, deployment, and configuration. Note that the system may appear inactive during the pre-checks portion of the update and after rebooting; this is expected behavior.

The reboot portion of the update includes a database check. If errors are found during the database check, the update requires additional time to complete. System daemons that interact with the database do not run during the database check and repair.

If you encounter issues with the progress of your update, contact Support.

 

Caution: If you update a Defense Center from Version 5.4.1.8, the system re-installs all intrusion rule updates instead of the latest intrusion rule update and the update takes much longer than the projected time listed in the Time and Disk Space Requirements for Updating toVersion 5.4.1.8. To reduce update time, Cisco strongly recommends updating to Version 5.4.1.2, then updating from Version 5.4.1.2 to Version 5.4.1.8.

Product Compatibility After Updating to Version 5.4.0.9 and Version 5.4.1.8

You must use at least Version 5.4.1 of the Defense Center to manage devices running Version 5.4.1.8. To manage an ASA FirePOWER module on an ASA5506-X,ASA5506W-X, ASA5506H-X, ASA5508-X, or ASA5516-X device, you must use at least Version 5.4.1 of the Defense Center.

 

Caution: If you update a Defense Center from Version 5.4.0 to Version 5.4.1.8, the system re-installs all intrusion rule updates instead of the latest intrusion rule update and the update takes much longer than the projected time listed in the Time and Disk Space Requirements for Updating toVersion 5.4.1.8. To reduce update time, Cisco strongly recommends updating to Version 5.4.1.2, then updating from Version 5.4.1.2 to Version 5.4.1.8.

Operating System Compatibility

You can host 64-bit virtual appliances running Version 5.4.1.8 on the following hosting environments:

■VMware vSphere VMware ESXi 5.0

■VMware vSphere VMware ESXi 5.1

■VMware vSphere VMware ESXi 5.5

■VMware vCloud Director 5.1

.You can install ASA FirePOWER modules running Version 5.4.1.8 on the following AA platforms running ASA Version 9.4(x), ASA 9.5(1.5), ASA Version 9.5(2), ASA Version 9.5(3), ASA Version 9.6(x), ASA Version 9.7(x), ASA Version 9.8(x), and ASA Version 9.9(x):

■ASA5506-X

■ASA5506W-X

■ASA5506H-X

■ASA5508-X

■ASA5516-X

Note that you can install Version 5.4.1.8 on ASA5506-X platforms running ASA Version 9.3(2), ASA Version 9.3(3) as well.

Note that ASA5500-X series devices managed by ASDM must be running ASDM Version 7.3(3) and later and 7.4(1) and later. For more information, see the FireSIGHT System Installation Guide or the FireSIGHT System Virtual Installation Guide.

Web Browser Compatibility

Version 5.4.1.8 of the web interface for the FireSIGHT System has been tested on the browsers listed in the following table.

Note: The Chrome browser does not cache static content, such as images, CSS, or Javascript, with the FireSIGHT System-provided self-signed certificate. This may cause FireSIGHT System to redownload static content when you refresh. To avoid this, add a self-signed certificate to the trust store of the browser/OS or use another web browser.

Note: If you use the Microsoft Internet Explorer 11 browser, you must disable the Include local directory path when uploading files to server option in your Internet Explorer settings via Tools > Internet Options > Security > Custom level.

 

Many browsers use Transport Layer Security (TLS) v1.3 by default. If you have an active SSL policy and your browser uses TLSv1.3, websites that support TLSv1.3 fail to load As a workaround, configure your managed device to remove extension 43 (TLS 1.3) from ClientHello negotiation. See this software advisory for more information.

Screen Resolution Compatibility

Cisco recommends selecting a screen resolution that is at least 1280 pixels wide. The user interface is compatible with lower resolutions, but a higher resolution optimizes the display.

Returning to a Previous Version

If you need to return your appliance to a previous release of the FireSIGHT System for any reason, contact Support for more information.

Reimage Appliances

If you need to reimage your appliances to the current release of the FireSIGHT System for any reason, refer to the FireSIGHT System Virtual Installation Guide for virtual appliances, and the Restoring a FireSIGHT System Appliance to Factory Defaults section of the FireSIGHT System Installation Guide for all other appliances.

CAUTION: Reimaging always involves at least one system reboot.

To update to Version 5.4.1.8 from a Version 5.4.1 or Version 5.4.0 image, see Before You Begin: Important Update and Compatibility Notes and Installing the Update.

Download the following files from the Support site:

Note: Download the image directly from the Support site. If you transfer an image file by email, it may become corrupted.

■for Series 3 Defense Center:

■for virtual Defense Centers:

■for Series 2 managed devices:

■ for Series 3 managed devices:

■for virtual managed devices:

■for ASA FirePOWER modules:

■for Cisco ASA with FirePOWER Services (ASA5506-X, ASA5506H-X, ASA5506W-X, ASA5508-X, and ASA5516-X):

Note: To install the ASA FirePOWER module Version 5.4.1 image on an ASA device, see the Cisco ASA FirePOWER Module Quick Start Guide for more information on deploying and installing the module.

Updating Defense Centers

Use the procedure in this section to update your Defense Centers, including virtual Defense Centers. For the Version 5.4.1.8 update, Defense Centers reboot.

Caution: BIOS Version 2.0.1b must be running on DC2000 and DC4000 appliances in order to update to version 5.4.1.1 or later. If updating your appliances fails due to an incompatible BIOS version, contact Support.

Caution: Before you update the Defense Center, reapply access control policies to any managed devices. Otherwise, the eventual update of the managed device may fail.

Caution: Do not reboot or shut down your appliances during the update until after you see the login prompt. The system may appear inactive during the pre-checks portion of the update; this is expected behavior and does not require you to reboot or shut down your appliances.

Note: Updating a Defense Center to Version 5.4.1.8 removes existing uninstallers from the appliance.

Caution: If you update a Defense Center from Version 5.4.0 to Version 5.4.1.8, the system re-installs all intrusion rule updates instead of the latest intrusion rule update and the update takes much longer than the projected time listed in the Time and Disk Space Requirements for Updating toVersion 5.4.1.8. To reduce update time, Cisco strongly recommends updating to Version 5.4.1.2, then updating from Version 5.4.1.2 to Version 5.4.1.8.

To update a Defense Center:

1. Read these release notes and complete any required pre-update tasks.

For more information, see Before You Begin: Important Update and Compatibility Notes.

2. Download the update from the Support site:

–for Series 3 and virtual Defense Centers:

Note: Download the update directly from the Support site. If you transfer an update file by email, it may become corrupted.

3. Upload the update to the Defense Center by selecting System > Updates, then clicking Upload Update on the Product Updates tab. Browse to the update and click Upload.

The update is uploaded to the Defense Center. The web interface shows the type of update you uploaded, its version number, and the date and time it was generated. The page also indicates whether a reboot is required as part of the update.

4. Make sure that the appliances in your deployment are successfully communicating and that there are no issues reported by the health monitor.

5. View the task queue (System > Monitoring > Task Status) to make sure that there are no tasks in progress.

You must wait until any long-running tasks are complete before you begin the update. Tasks that are running when the update begins are stopped, become failed tasks, and cannot be resumed; you must manually delete them from the task queue after the update completes. The task queue automatically refreshes every 10 seconds.

6. Select System > Updates.

7. Click the install icon next to the update you uploaded.

8. Select the Defense Center and click Install. Confirm that you want to install the update and reboot the Defense Center.

The update process begins. You can begin monitoring the update’s progress in the task queue (System > Monitoring > Task Status). However, after the Defense Center completes its necessary pre-update checks, you are logged out. When you log back in, the Upgrade Status page appears. The Upgrade Status page displays a progress bar and provides details about the script currently running.

If the update fails for any reason, the page displays an error message indicating the time and date of the failure, which script was running when the update failed, and instructions on how to contact Support. Do not restart the update.

Caution: If you encounter any other issue with the update (for example, if a manual refresh of the Update Status page shows no progress for several minutes), do not restart the update. Instead, contact Support.

When the update completes, the Defense Center displays a success message and reboots.

9. After the update finishes, clear your browser cache and force a reload of the browser. Otherwise, the user interface may exhibit unexpected behavior.

10. Log into the Defense Center.

11. Select Help > About and confirm that the software version is listed correctly: Version 5.4.1.8. Also note the versions of the rule update and VDB on the Defense Center; you will need this information later.

12. Verify that the appliances in your deployment are successfully communicating and that there are no issues reported by the health monitor.

13. If the rule update available on the Support site is newer than the rules on your Defense Center, import the newer rules. Do not auto-apply the imported rules at this time.

For information on rule updates, see the FireSIGHT System User Guide.

14. If the VDB available on the Support site is newer than the VDB on your Defense Center, install the latest VDB.

Installing a VDB update causes a short pause in traffic flow and processing, and may also cause a few packets to pass uninspected. For more information, see the FireSIGHT System User Guide.

15. Reapply device configurations to all managed devices.

To reactivate a grayed-out Apply button, edit any interface in the device configuration, then click Save without making changes.

16. Reapply access control policies to all managed devices.

Caution: Do not reapply your intrusion policies individually; you must reapply all access control policies completely.

When you apply an access control policy, resource demands may result in a small number of packets dropping without inspection. Additionally, applying some configurations requires the Snort process to restart, which interrupts traffic inspection. Whether traffic drops during this interruption or passes without further inspection depends on the model of the managed device and how it handles traffic. For more information, see the Configurations that Restart the Snort Process section of the FireSIGHT System User Guide.

17. If a patch for Version 5.4.1.8 is available on the Support site, apply the latest patch as described in the FireSIGHT System Release Notes for that version. You must update to the latest patch to take advantage of the latest enhancements and security fixes.

Updating Managed Devices

After you update your Defense Centers to Version 5.4, Version 5.4.1, or Version 5.4.1.8, use them to update the devices they manage.

A Defense Center must be running at least Version 5.4 to update its managed devices to Version 5.4.1.8. Because they do not have a web interface, you must use the Defense Center to update your virtual managed devices, and ASA FirePOWER modules.

Updating managed devices is a two-step process. First, download the update from the Support site and upload it to the managing Defense Center. Next, install the software. You can update multiple devices at once, but only if they use the same update file.

When you updated clustered Cisco ASA with FirePOWER Services apply the update one device at a time and allow the update to complete before updating the second device.

Before you update an ASA FirePOWER module, set the device clock to the correct time. If an ASA device clock is set to the incorrect time before updating, the Access Control Licensing page does not load.

Caution: Before you update a managed device, use its managing Defense Center to reapply the appropriate access control policy to the managed device. Otherwise, the managed device update may fail.

Caution: Installing the updates and applying policies can interrupt traffic inspection due to Snort restarts and system restarts. How these interruptions affect traffic depends on the model of the managed device and how it handles traffic. For more information, see Traffic Flow and Inspection During the Update.

Caution: Do not reboot or shut down your appliances during the update until after you see the login prompt. The system may appear inactive during the pre-checks portion of the update; this is expected behavior and does not require you to reboot or shut down your appliances.

To update managed devices:

1. Read these release notes and complete any required pre-update tasks.

Note: Download the update directly from the Support site. If you transfer an update file by email, it may become corrupted.

Caution : Failing to set the device clock of an ASA FirePOWER module running FirePOWER Services or a Cisco ASA managed by ASDM to the correct time prior to updating the device causes the Access Control Licensing page to not load.

For more information, see Before You Begin: Important Update and Compatibility Notes.

2. Update the software on the devices’ managing Defense Center; see Updating Defense Centers.

3. Download the update from the Support site:

–ffor ASA FirePOWER modules (ASA5506-X, ASA5506W-X, ASA5506H-X, ASA5508-X, and ASA5516-X, and the ISA 3000):

Caution: ASA FirePOWER modules (ASA5506-X, ASA5506W-X, ASA5506H-X, ASA5508-X, and ASA5516-X) must be running at least Version 5.4.1 before updating to Version 5.4.1.8. The ISA 3000 must be running at least Version 5.4.1.7 before updating to Version 5.4.1.8. See the Cisco ASA FirePOWER Module Quick Start Guide for more information on deploying and installing the module.

4. Upload the update to the Defense Center by selecting System > Updates, then clicking Upload Update on the Product Updates tab. Browse to the update and click Upload.

The update is uploaded to the Defense Center. The web interface shows the type of update you uploaded, its version number, and the date and time it was generated. The page also indicates whether a reboot is required as part of the update.

5. Make sure that the appliances in your deployment are successfully communicating and that there are no issues reported by the health monitor.

6. Click the install icon next to the update you are installing.

7. Select the devices where you want to install the update.

If you are updating a stacked pair, selecting one member of the pair automatically selects the other. You must update members of a stacked pair together.

8. Click Install. Confirm that you want to install the update and reboot the devices.

9. The update process begins. You can monitor the update's progress in the Defense Center’s task queue (System > Monitoring > Task Status).

Note that managed devices may reboot twice during the update; this is expected behavior.

Caution: If you encounter issues with the update (for example, if the task queue indicates that the update has failed or if a manual refresh of the task queue shows no progress for several minutes), do not restart the update. Instead, contact Support.

10. Select Devices > Device Management and confirm that the devices you updated have the correct software version: Version 5.4.1.8.

11. Verify that the appliances in your deployment are successfully communicating and that there are no issues reported by the health monitor.

12. Reapply device configurations to all managed devices.

Tip: To reactivate a grayed-out Apply button, edit any interface in the device configuration, then click Save without making changes.

13. Reapply access control policies to all managed devices.

Caution: When you apply an access control policy, resource demands may result in a small number of packets dropping without inspection. Additionally, applying some configurations requires the Snort process to restart, which interrupts traffic inspection. Whether traffic drops during the interruption or passes without further inspection depends on the model of the managed device and how it handles traffic.For more information, see the Configurations that Restart the Snort Process section in the FireSIGHT System User Guide.

14. If a patch for Version 5.4.1.8 is available on the Support site, apply the latest patch as described in the FireSIGHT System Release Notes for that version.

You must update to the latest patch to take advantage of the latest enhancements and security fixes.

Issues Resolved in Previous Versions

Previously resolved issues are listed by version.

Issues Resolved in Version 5.4.0.8 and 5.4.1.7:

■Resolved an issue where, if you registered a device to a pair of a Defense Centers and applied an access control policy with URL rules and turned on URL cloud query, the managed device did not successfully request a URL lookup. (CSCus99059)

■Resolved an issue where, if you clicked the Email Status to: link on the Scheduling page ( System > Tools > Scheduling), the web browser incorrectly displayed a 500 Internal Server Error message. (CSCuv22590)

■Resolved an issue where the FSIC incorrectly checked extraneous files. (CSCuv55284)

■Resolved an issue where, in some cases, attempting to backup and restore a Defense Center failed. (CSCuv95657, CSCuw71197)

■Improved general appliance functionality. (CSCuw44360)

■Resolved an issue where the system incorrectly allowed you to cluster a 3D8260 device with a 3D8270 device. (CSCuw92248)

■Resolved an issue where, if you configured Cisco Redundancy Protocol (SFRP) via an IPv6 address on a Series 3 pair with routed or hybrid interfaces, and the system experienced a fail-over, the system incorrectly handled sessions shared between pair members (CSCux73498)

■Resolved an issue where resuming a failed upgrade for a Defense Center pair caused an incomplete upgrade, broken HA state and an inability edit the access control policy. (CSCuy05808)

■Resolved an issue where the network map experienced issues if the last entry in the RNA map list was a duplicate. (CSCuy01269)

■Resolved an issue where flash files that use LZMA compression were not decompressed. (CSCuy22393)

■Resolved an issue where, if you created a file policy and enabled the HTTP preprocessor, and the system detected a malware file containing a custom SHA256 value, the system did not block the malware file. (CSCuy32815)

■Resolved an issue where, if you edited a base intrusion policy used by one or more child policies, the system did not mark the child policies as out-of-date when it should. (CSCuy32822)

■Resolved an issue where intrusion policies continuously and unsuccessfully attempted to sync paired Defense Centers due to taking longer than a configured timeout. (CSCuy33982)

■Resolved an issue where, if a registered ASA FirePOWER module experienced memory corruption, the system suffered a network outage and restarted. (CSCuy37234)

■Resolved an issue where, if you removed a user from all the groups within a LDAP connection referenced in the access control policy and applied configuration changes, then clicked Download users and groups from the Users page ( Policies > Users), the system did not update the applied configuration and continued to process traffic as if the group(s) still contained the user. (CSCuy39685)

■Improved CIP traffic detection on mid-stream sessions. (CSCuy43852)

■Resolved an issue where if you enabled the use of a proxy on the Defense Center and submitted captured files to the Cisco cloud for dynamic analysis, the system generated a Dynamic Analysis Failed (Network Issue) error and did not successfully submit the files for analysis. (CSCuy49613)

■Resolved an issue where, if you applied an intrusion rule set to Drop and Generate Events and enabled Sensitive Data Detection in the Advanced Settings tab of the intrusion Edit Policy page ( Policies > Intrusion > Intrusion Policy), then edited the Sensitive Data Detection page and checked Masks, the system did not correctly mask some sensitive data generated in intrusion events. (CSCuy56094)

■Resolved an issue where access control rules did not function correctly for web applications and URLs that were SPDY-enabled. (CSCuy65157)

■Resolved an issue where updating a DC750 from Version 5.4 to Version 5.4.1.6 or later failed. (CSCuy72106)

■Resolved an issue where creating a stack on a Defense Center failed, the Device Management page ( Devices > Device Management) and the Policies page did not load, and the system generated a Task failure (3c428400-ebb6-11e5-b1fb-4696ad84e4e4) Update stack : Unable to load SF::PeerManager::ClusterMgmt: Attempt to reload SF/PeerManager/ClusterMgmt.pm aborted. error. (CSCuy79698)

Issues Resolved in Version 5.4.0.7 and 5.4.1.6:

■ Security Issue Addressed an arbitrary script injection vulnerability allowing unauthenticated, remote attackers to exploit GNU libc or libpng, as described in CVE-2014-7547 and CVE-2015-8126.

■ Security Issue Addressed a vulnerability issue that generated denial of service in GNU utilities, as described in CVE-2015-7547.

■ Security Issue Addressed a cross-site scripting (XSS) and arbitrary HTML injection vulnerabilities, as described in CVE-2015-0737.

■ Security Issue Addressed an arbitrary HTTP header injection vulnerability allowing unauthenticated, remote attackers to exploit managed devices as described in CVE-2016--134.

■Resolved an issue where, if you generated an intrusion even performance graph with Last Hour set as the time range, the system incorrectly generated a blank graph. (145237/CSCze95774)

■Resolved an issue where updating the vulnerability database (VDB) on a paired Defense Center incorrectly switched the peer of the pair from active to standby and from standby to active when it should not. (CSCur59343)

■Resolved an issue where, if you configured Open Shortest Path First (OSPF) in the Dynamic Routing tab of the Virtual router page ( Devices > Devices Management > Virtual routers > Dynamic Routing) and added an Area, then changed the value of the Cost column and deployed changes, the system did not update the OSPF. (CSCus31735)

■Resolved an issue where Snort generated reporting statistics at inconsistently intervals. (CSCus42306)

■Resolved an issue where, if you created an access control rule configured with an Interactive Block action and you viewed a blocked web page in a Chrome web browser, the Continue button to bypass the block page did not work. (CSCuu53237, CSCuv21748)

■Resolved an issue where creating a search for an intrusion event with an original client IP using a negated subnet IP address caused the system to incorrectly exclude intrusion events with no original client IP. (CSCuu68438)

■Resolved an issue where you could not manually set the time zone on an ASA FirePOWER module managed by ASDM. (CSCuu70250)

■Resolved an issue where internal CA certificates generated on the Object Management page ( Objects > Object Management > PKI) remained valid for 30 days when they should be valid for ten years. (CSCuv29004)

■Resolved an issue where, if you deployed an SSL policy and enabled SSL decryption, the system experienced a disruption in traffic after a few hours of decrypting SSL traffic. (CSCux75036)

■Resolved an issue where, if you attempted to update the system with less than the required amount of free space, the update failed and the system incorrectly appeared to have a negative amount of space available. (CSCuv43019)

■Improved Simple Mail Transfer Protocol (SMTP) traffic detection. (CSCuy44141)

■Resolved an issue where, if you suppressed a rule in an intrusion policy with the Suppression Type set to either Source or Destination IP address with a custom variable, then deleted the custom variable and applied policy, policy apply failed the system did not indicate why. (CSCuv44581)

■You can now execute the Show user CLI command on ASA FirePOWER modules. (CSCuv45343)

■Resolved an issue where selecting network file system 4(NFS4) storage as a remote storage type from the Storage Type drop-down menu on the Remote Storage device tab of the Local Configuration page ( System > Local > Configuration) erroneously generated an error. (CSCuv50519)

■Optimized firewall rules count limit. (CSCuv86743)

■Resolved an issue where the 7000 Series or 8000 Series devices may have changed the outermost Ether type for IEEE 802.1Q VLAN traffic they inspected from 88a8 to 8100, which prevented endpoints from receiving those frames. (CSCuw57916)

■Resolved an issue where, if you removed a DNS entry from a management interface and saved the configuration without replacing or adding another DNS entry, then attempted to login to web interface, the web page generated a blank login screen. (CSCuw68408)

■Resolved an issue where health events caused excessive logging and the system experienced disk space issues. (CSCuw84304)

■Resolved an issue where if you created a logical interface that referenced a link aggregated group (LAG) to a Series 3 device and added, removed, or replaced the existing NetMod on the device, the system did not recognize any referenced objects. (CSCux03639)

■Resolved an issue where the Defense Center’s health monitor generated extraneous Warning (yellow) and Critical (red) health alerts when there were no alerts. (CSCux04564)

■Resolved an issue where, if you enabled Automatic Rule Update on a Defense Center pair and installed a rule update, then applied policies, the Defense Centerincorrectly displayed the access control policy as out-of-date when it was not. (CSCux21111)

■Resolved an issue where disabling interface eth0 caused system issues. (CSCux22564, CSCux35301)

■Resolved an issue where, if you edited a registered device's name to include a character larger than 8-bit and configured passive mode interfaces, then enabled Inline Normalization and applied the access control policy, the system did not generate the policy deploy dialog. (CSCux23227)

■Resolved an issue where, if you update a system running Version 5.4 to Version 5.4.1 or later with STIG mode enabled, update failed. (CSCux23487)

■Resolved an issue where, if you logged into the FirePOWER system and deleted an In queue or a Report Generation Failed report from the reports tab of the Reporting page ( Overview > Reporting) as a user other than the user who created the report, the system did not delete the report when it should have. (CSCux27304)

■Improved HTTP traffic processing and reduced the chance of dropped packets when processing large HTTP POST events. (CSCux30861)

■Resolved an issue where, if you created a system policy containing an external authentication server with the Attribute field set to string, policy apply failed and the system generated an error. (CSCux31226)

■Resolved an issue where, if you created an access control policy referencing an SSL policy containing a network object with multiple entries on a managed Firepower appliance running Version 5.4 or later and you updated the system to Version 6.0, policy apply failed. (CSCux31618)

■Resolved a rare issue where the system did not properly process HTTP POST data with incorrect headers. (CSCux40517)

■Resolved an issue where, in some cases, the system database integrity check failed and you could not upgrade the system to Version 6.0. (CSCux52218)

■Resolved an issue where, if you edited and deployed an intrusion policy that was created in Version 5.4 or earlier, intrusion layers may have become corrupted. (CSCux57697)

■Resolved an issue where, if you deployed an intrusion policy and enabled Sensitive Data Detection, the system did not consistently mask content in traffic containing sensitive data. (CSCux61562)

■Improved packet reassembly for HTTP traffic containing chunked encoding. (CSCux61630)

■Improved HTTP inspection of gzip compressed data when there is no Content-Length header present in the HTTP Response. (CSCux76518)

■Resolved an issue where, graphs generated from the Intrusion Event Performance page ( Overview > Summary > Intrusion Event Performance) no data. (CSCux91742)

■Resolved an issue where, if you deployed an access control policy containing an SSL rule, the system eventually dropped the majority of incoming traffic and caused a network outage. (CSCux95913)

■Resolved an issue where, if you applied an intrusion rule set to Drop and Generate Events and enabled Sensitive Data Detection in the Advanced Settings tab of the intrusion Edit Policy page ( Policies > Intrusion > Intrusion Policy), then edited the Sensitive Data Detection page and checked Masks, the system did not correctly mask some sensitive data generated in intrusion events. (CSCuy43629)

■Resolved an issue where, if you applied policies after importing the 2016-02-28-001 rule update, the system did not correctly apply policies. (CSCuy56212)

Issues Resolved in Version 5.4.0.6 and Version 5.4.1.5:

■ Security Issue Addressed multiple vulnerability issues in Linux, MYSQL, DNS, NTP, OpenSSL, and other third parties, as described in CVE-2013-1944, CVE-2013-4545, CVE-2014-0139, CVE-2014-9296, CVE-2015-0405, CVE-2015-0423, CVE-2015-0433, CVE-2015-0438, CVE-2015-0439, CVE-2015-0441, CVE-2015-0500, CVE-2015-0501, CVE-2015-0503, CVE-2015-0508, CVE-2015-1793, CVE-2015-2568, CVE-2015-2571, CVE-2015-2573, CVE-2015-2575, CVE-2015-6335, CVE-2015-7855, and CVE-2015-7871.

■ Security Issue Addressed an arbitrary script injection vulnerability allowing unauthenticated, remote attackers to exploit GNU C library DNS resolution functionality, as described in CVE-2013-7423.

■ Security Issue Addressed multiple vulnerabilities in OpenSSL that allowed external attacks on client connections, as described in CVE-2014-8275 and CVE-2015-0204.

■ Security Issue Addressed multiple cross-site scripting (XSS) and arbitrary HTML injection vulnerabilities, including those described in CVE-2015-6353.

■ Security Issue Addressed multiple vulnerability issues that generated denial of service in NTP, XML, OpenSSL, and other third parties as described in CVE-2015-7691, CVE-2015-7692, CVE-2015-7701, CVE-2015-7702, CVE-2015-7704, CVE-2015-7705, CVE-2015-7848, CVE-2015-7850, CVE-2015-7853.

■ Security Issue Addressed multiple arbitrary script injection vulnerabilities allowing unauthenticated, remote attackers to exploit or overwrite functionality as described in CVE-2015-7703.

■ Security Issue Addressed a vulnerability that allowed an authenticated user can access system files using path traversal as described in CVE-2015-7851.

■Improved inspection of traffic tagged by Cisco Identity Service Engine (ISE). (143060/CSCze94478)

■Resolved an issue where the memory usage health monitor erroneously generated false positives. (144593/CSCze94840)

■Resolved an issue where, if you created an intrusion rule with the source IP set to !$HOME_NET and added the intrusion rule to an intrusion policy, then changed the rule state to Drop and Generate Events, the system does not allow you to save the intrusion policy. (CSCur53155)

■Resolved an issue where the show traffic-statistics CLI command did not display data for the second interface of an inline pair on a virtual device. (CSCur59771)

■Resolved an issue where the system generated excessive and extraneous logs in the system log (syslog). (CSCur75622)

■Resolved an issue where, if you changed the selected time zone in the Time Zone Preference tab on the User Preferences page, the system did not reflect daylight savings time. (CSCur92028)

■Resolved an issue where the system included both raw HTTP packets and reassembled packets in event counts. (CSCus68893)

■Resolved an issue where, if you applied an access control rule containing a network object or group that had been previously deleted from a primary or active Defense Center in a high availability configuration, the secondary or passive system did not recognize the network object or group as deleted and experienced issues. (CSCut54187)

■Resolved an issue where, if you applied a NAT policy to a pair of clustered devices, policy apply on the secondary device failed and the system separated the cluster. (CSCut98774)

■Resolved an issue where, if you created an access control policy with a URL category condition and the system loaded a partial database, the system experienced issues. (CSCuu06714)

■Resolved an issue where a SSH session did not time out when it should. (CSCuu21037)

■Resolved an issue where, in some cases, creating traffic profiles generated multiple errors. (CSCuu22704)

■Resolved an issue where, if you enabled at least two management interfaces and your system lost connectivity to one of the interfaces, the system defaulted to an incorrect gateway IP address and you could not access the interface. (CSCuu44020)

■Improved eStreamer performance. (CSCuu94902)

■Syslog messages now populate information for the following fields: HTTP Referrer, User Agent, and Referenced Host. (CSCus18179)

■The system only supports one normal IP address for virtual router interfaces on clustered Series 3 devices. (CSCut58601)

■Improved health alert notifications for failed malware cloud lookups. (CSCut77594)

■Resolved an issue where, if the system experienced two sequential system failures, the system fell into bypass mode even if you configured non-bypass mode. (CSCut80892)

■Resolved an issue where using the show managers CLI command on a device registered to a system with multiple interfaces configured caused the system to display the incorrect IP address. (CSCut95947)

■Resolved an issue where, if you created a file policy configured to Inspect Archives, the network map experienced issues and the system stopped processing traffic. (CSCuu14892)

■Resolved an issue where, if you created an access control policy with the default action set to Block with Reset that referenced a file policy with the default action set to Block Malware, the system did not block the first malware file detected. (CSCuu81183)

■Resolved an issue where, if a backup filename contained a space, applying the backup to a Defense Center failed. (CSCuu99818)

■Resolved an issue where the system did not acknowledge users as members of their primary LDAP groups. (CSCuv03821)

■Resolved an issue where, if you generated a connection event report in the Report Templates page with a modified Maximum Results value, the system generated the report with the default value instead of the configured value. (CSCuv06557)

■Resolved an issue where the system did not deploy VPN when it should. (CSCuv20623)

■Resolved an issue where, if a host generated an indication of compromise (IOC) and you disabled the IOC for that host on the Host Profile page, the Indications of Compromise by Host dashboard widget incorrectly displayed the IOC. (CSCuv41376)

■Improved health monitor alerts. (CSCuv96121)

■The system now supports UTF-8 characters when creating LDAP objects and downloading groups and users in access control and system policies. (CSCuv27375)

■Resolved an issue where, if you registered many devices, configured many interfaces on a managed device, or created many VPN deployments, the system did not generate information for all of the devices or interfaces or VPN deployments on their respective pages. (CSCuv76287)

■Resolved an issue where policy apply on Series 3 devices and ASA Firepower modules experiencing high volumes of traffic failed due to a memory limitation. (CSCuv99982)

■Resolved an issue where, if you created a new identity in a Microsoft Active Directory session with a Department value containing double quotes ( “ ”) and immediately logged into a system, the system was unable to retrieve the new user profile. (CSCuw03498)

■Improved the stability of the network map. (CSCuw06359)

■Resolved an issue where, if you configured a static route on your appliance and reapplied your system policy, the system incorrectly deleted the static route. (CSCuw07826)

■Resolved an issue where the system displayed the incorrect device name in correlation events generated by a correlation rule on malware events. (CSCuw11056)

■Resolved an issue where registering and managing multiple devices on a DC4000 caused system connection issues. (CSCuw11462)

■Resolved an issue where, if you registered a device to the primary Defense Center in a high availability environment and renamed the device to a name containing 40 characters or more before device synchronization completed, device registration to the secondary Defense Center failed. (CSCuw27368)

■Resolved an issue where, if you created an access control rule with the default action set to either Interactive Block or Interactive Block with Reset, clicking Continue on the interactive block page did not redirect to a HTTPS page. (CSCuw28868)

■Resolved an issue where, if you used a Windows OS computer to access the web interface and created an SSL policy, the firewall incorrectly blocked sessions even if you did not set the default action to Block. (CSCuw36519)

■Resolved an issue where the system with an applied file policy failed to detect and process FTP traffic. (CSCuw49257)

■Resolved an issue where deleting third-party vulnerabilities via a host input client connection caused system issues. (CSCuw56215)

■Resolved an issue where, if you applied an access control policy referencing four or more file policies to a Cisco ASA FirePOWER module, the system incorrectly processed Simple Mail Transfer Protocol (SMTP) traffic and experienced issues. (CSCuw65202)

■Resolved an issue where systems with enabled traffic profiles experienced disk space issues. (CSCuw74528)

■Resolved an issue where, if you executed host input commands on a Defense Center in a high availability configuration, the system failed to apply the host input commands to the secondary Defense Center in the pair. (CSCuw98376)

■Resolved an issue where, after resolving a disk space issue, the system continued to experience issues storing events and logged All shard connections are busy for partition errors. (CSCux00142)

Issues resolved in Version 5.4.0.5 and Version 5.4.1.4:

■ Security Issue Resolved an issue where the system did not properly encode a newly added comment to an access control policy rule.

■ Security Issue Addressed multiple cross-site request forgery (CSRF) vulnerabilities as described in CVE-2015-4242.

■Resolved an issue where, if you logged into your system as a user other than the admin user and edited the base layer of an intrusion policy, the system incorrectly marked all affected edited intrusion policies as updated by admin when it should not have. (CSCur79437)

■Resolved an issue where, if you configured a system policy to use remote NTP server to synchronize time to a system with registered devices and you disabled device management, NTP failed to sync updated time to the device after the system enabled device management. (CSCur97671)

■Resolved an issue where, in some cases, the Defense Center experienced system issues and failed to load access control rules. (CSCut30047)

■Resolved an issue where the system experienced latency while downloading large number of groups and users from Microsoft Active Directory Server and the system did not match traffic to the access control rule referencing LDAP groups. (CSCut56233)

■Resolved an issue where the system incorrectly handled static routes configured on Series 3 devices with multiple interfaces. (CSCut84953)

■Resolved an issue where the system displayed an internal server error if you viewed the Discovery Statistics page on a Defense Center that did not have any discovery events. (CSCuu00749)

■In some cases, the system does not generate intrusion event performance graphs ( Overview > Summary > Intrusion Event Performance). (CSCuu15447)

■Resolved an issue where, if you backed up your Defense Center and restored the backup to a different Defense Center, the Defense Center with the restored backup did not allow you to log in. (CSCuu35238)

■Resolved an issue where, if you downloaded LDAP users or an LDAP group to a Defense Center without a FireSIGHT license, the download failed and the system generated a user limit reached error. (CSCuu35615)

■Resolved an issue where the Cisco Redundancy Protocol (SFRP) advertisement interval value appeared to be configurable when you added or edited a routed IP address when it was not. (CSCuu37687)

■Resolved an issue where ASA Firepower modules running the minimum ASA version 9.3.2.2 or later did not enforce the mpf-policy-map-class mode. (CSCuu68273)

■Resolved an issue where the system incorrectly disabled your configured static route, virtual router, or virtual router filter if you configured a static or virtual router on a managed device with clustered interfaces. (CSCuu47325)

■Resolved an issue where the system did not generate a list of vendors if you created a product map and selected the Add Fix Map option. (CSCuu79373)

■Resolved an issue where, if you applied an SSL policy with the default actions set to Decrypt-Resign, decrypted traffic that egressed from one interface set was switched or routed so it ingressed into a different interface set on the same managed device. (CSCuu97712)

■Resolved an issue where the License page incorrectly listed licenses under the wrong devices if you added more than one license to a 3D8250 device and one license to another Series 3 device. (CSCuu99789)

■Resolved an issue where DC2000 and DC4000 BIOS settings could not be configured using ucsfg Cisco UCS Configuration Utility commands. (CSCuv03352)

■Resolved an issue where the system did not include data from X-Forward-For, True-Client-IP, and other packet data in generated intrusion events. (CSCuv03727)

■Resolved an issue where, if you applied an intrusion policy to a managed device that was not set to drop when inline, the system did not block files with a malware disposition when it should. (CSCuv12647)

■Resolved an issue where troubleshoot generation from the Health Monitor page failed if you enabled both IPv6 IP addresses. (CSCuv27328)

■Resolved an issue where the system incorrectly saved blacklist as the priority list when configuring the priority settings of the reputation preprocessor even if you set the configuration to whitelist. (CSCuv52955)

■Improved memory utilization for access control rule memory with port ranges. (CSCuv64114)

■Resolved an issue where, if you modified an attribute setting in a host profile, the system did not retain the host’s attribute setting after the host IP address changed. (CSCuv69748)

■Improved network map generation. (CSCuv72386)

■Resolved an issue where the system did not include new user accounts not mapped to a host IP address, and grouped access control rules configured to detect user traffic by group failed. (CSCuv78458)

■Resolved an issue where your network analysis policy did not correctly load after a system update. (CSCuw44448)

Issues resolved in Version 5.4.0.4 and Version 5.4.1.3:

■ Security Issue Addressed a vulnerability issue in Linux, as described in CVE-2011-4131.

■ Security Issue Resolved an issue where managed devices experienced microengine failure when processing corrupted traffic. (CSCuu86214)

■Resolved an issue where you could not reapply an intrusion policy (individually or as part of an access control policy reapply) a total of 4096 or more times to a single managed device was not supported. (134385/CSCze89030)

■Resolved an issue where, if you imported an intrusion policy referenced by another policy as a shared layer or as a base policy, importing the intrusion policy failed. (144946/CSCze96151)

■Resolved an issue where the system incorrectly listed twice the number of registered targets on the Intrusion Policy list page. (CSCus08840)

■Resolved an issue where you could add old events from the clipboard to a new incident, even though the events in your clipboard section of the Incidents page appeared empty. (CSCus67128)

■Resolved an issue where, if you edited an access control rule with multiple category conditions and attempted to remove one of the conditions, the system only removed the first listed category condition. (CSCut25082)

■Resolved an issue where the system reported intrusion rules as inactive if the rule targeted a passive zone on an 8000 Series device and performed the show fastpath-rules CLI command. (CSCut32479)

■Resolved an issue where configuring a file policy with Inspect Archives enabled caused Snort to stop passing traffic.(CSCut39253, CSCuu60621)

■Improved troubleshooting. (CSCut43542)

■Improved Disk manager reliability. (CSCut65740)

■Improved correlation rule performance. (CSCut97938)

■Resolved an issue where downgrading RPM packet manager (RPM) files starting with Cisco did not correctly reset the RPM install history. (CSCut98525)

■Resolved an issue where policy apply failed if you reapplied an active access control policy to an ASA FirePOWER module without editing the policy. (CSCuu14839)

■Improved error message warning against use of overlapping port settings in DCE/RPC advanced settings. (CSCuu18577)

■Resolved an issue where connectivity to the AMP cloud may be lost after using the system for an extended period of time. (CSCuu24587)

■Resolved an issue where the system experienced a disruption in traffic if you created a link aggregation group (LAG) on a physical Series 3 device connected to a Cisco Nexus 7000 switch. (CSCuu31626)

■Resolved an issue where, if you changed your system's time zone to a zone east of UTC and added a correlation rule with at least one inactive period to a correlation policy, policy apply failed. (CSCuu37600)

■Resolved an issue where creating a routed interface on your clustered Series 3 device caused connectivity issues. (CSCuu37668)

■Resolved an issue where the Send email check box on the Report Templates tab of the Reporting page did not stay selected if you generated a report, navigated away from the Report Templates tab, and then generated another report. (CSCuu97750)

■Improved tracking of the number of monitored hosts. (CSCuu77263)

■Resolved an issue where, if you configured your Defense Center to use a static IPv4 address with an IPv6 address enabled and you accessed the Defense Center's interface using the IPv6 address, the Access Control Policy page did not load. (CSCuu83933)

■Resolved an issue where, in rare cases, your system appeared unstable and did not recover from a hard reset. (CSCuu93154)

■Resolved an issue where a drive failure on some DC4000 appliances caused RAID controller failure and data loss. (CSCuu93159)

■Resolved an issue where the Product Licensing dashboard widget did not list any URL Filtering licenses even if URL Filtering licenses were present. (CSCuu97762)

■Improved network mapping performance. (CSCuv48373)

Issues resolved in Version 5.4.0.3 and Version 5.4.1.2:

■ Security Issue Addressed multiple vulnerabilities in SSLv3 that allowed external attacks on client connections, as described in CVE-2015-0286,CVE-2015-0287, CVE-2015-0289, CVE-2015-0292, and CVE-2015-0293.

■ Security Issue Addressed a cross-site scripting (XSS) vulnerability, as described in CVE-2015-0707.

■ Security Issue Addressed multiple vulnerability issues in Linux and other third parties, as described in CVE-2011-2699, CVE-2012-2744, CVE-2012-3400, and CVE-2015-1781.

■ Security Issue Addressed a vulnerability in HTTP connection handling that allowed users to be redirected to malicious websites, as described in CVE-2015-0706.

■ Security Issue Resolved an issue where the system can experience a microengine fault based on malformed packet data in traffic inspected by a FirePOWER 7000 or 8000 Series managed device. (CSCuu10871, CSCuu26678)

■When routing is configured on a Series 3 device, the system may forward source-routing IPv4 packets, which direct the packet along a different path than configured on the router and can be used to bypass network security measures. (132121/CSCze88520)

■Resolved an issue where, if you viewed the threat score of some files from generated events, the system incorrectly reported the threat score as a number instead of Low, Medium, High, or Very High. (142290/CSCze93722)

■Improved URL filtering. (144198/CSCze94590)

■Resolved an issue where the passive interfaces on 7000 Series devices reported incorrect egress security zones and interfaces. (144624/CSCze95206)

■Resolved an issue where, if you edited the interface security zones from the Object Management page, the stacked device configuration appeared to be up-to-date when it wasn't. (144626/CSCze94847)

■Resolved an issue where, if you enabled remote storage and created a scheduled email alert response on your Defense Center, the scheduled email alert disabled remote storage and remote storage backups failed. (145288/CSCze95993)

■Resolved an issue where access control rules containing web application conditions did not match against traffic if users on your network entered a URL into the address bar that was not lowercase. (CSCur37364)

■Resolved an issue where adding a Defense Center in a high availability configuration to your system caused the secondary Defense Center to overwrite the existing SHA-256 values in the system’s file list. (CSCur57708)

■Resolved an issue where, if you created aa correlation rule to trigger when an intrusion event or connection event occurs and the condition matches an ingress security zone, egress security zone, ingress interfaces, or egress interface as the condition, the system did not recognize the rule and failed to generate events for traffic matching the rule. (CSCur59840)

■Improved multiple dashboard widgets. (CSCus11068)

■Resolved an issue where your system occasionally experienced latency during Snort restart. (CSCus13247)

■Resolved a bug where file names of uuencoded email attachments was not displayed in file events and malware events. (CSCus30831)

■Resolved an issue where some HTTPS traffic inspections resulted in false positives. (CSCus32474)

■Resolved an issue where the system generated an Internal Server Error message if the password for your registered ASA FirePOWER device included an unsupported character. (CSCus68604)

■Resolved an issue where the system generated a malware alert on the second attempt to download a suspicious file over HTTP instead of generating an alert on the first attempt to download the file. (CSCus83151)

■Resolved an issue where, if you created an user role in the Custom User Role tab of the User Management page, the system disabled some check-boxes but enabled some options available under the disabled check boxes. (CSCus87248)

■Resolved an issue where, if you attempted to download a file but the download was blocked and the file was downloaded again, the system either did not identify the file type or the system generated incorrect SHA-256 values. (CSCus87799)

■If your system restarts or reloads after a VDB install and the Inspect Traffic During Policy Apply option in your firewall policy is unchecked, you may experience loss of network connectivity during the restart process. (CSCut08225)

■Resolved an issue where, if you created an access control rule configured to send events to an external syslog server and the system detected multiple truncated unified files, the device stopped sending connection events to the syslog server. (CSCut14629)

■Improved SFDatacorrelator performance when processing historical email and eStreamer alerts. (CSCut23688)

■Resolved an issue where the FirePOWER fiber ports on the 4-Port 10Gbps non-bypass network modules would not reliably achieve link connectivity with APCON IntellaFlex or IntellaPatch brand devices. (CSCut24654)

■Resolved an issue where the system displayed incorrect file type information on the Network File Trajectory page. (CSCut27978)

■Resolved an issue where enabling the Original Client IP column in the Intrusion Events table view and reviewing one or more row generated errors. (CSCut41458)

■Resolved issues where the system exposed plain text passwords in syslog messages in the web interface and in log files accessible via the shell.(CSCut80473)

■Resolved an issue where the Retrospective Malware Events table did not include the old disposition or the new disposition fields of a retrospective malware event. (CSCut83512)

■Resolved an issue where, if you restarted your ASA5585-X device with a large number of subinterfaces configured without also restarting the SFR5585-X service card, the SFR5585-X service card appeared to fail. (CSCut89619)

■Resolved an issue where, if you configured a domain name without a DNS entry, the web interface page did not load. (CSCut89714)

■Resolved an issue where, if you removed a malware license from your Defense Center while the Defense Center experienced a disruption in cloud connectivity, the system continuously generated Cannot connect to cloud Health Monitor alerts. (CSCut95470)

■Resolved an issue where configuring a Windows TGM Proxy caused a disruption in detection preprocessors. (CSCut95588)

■Disabling one of management interfaces from a multiple manager interface configuration no longer disables the communication channel. (CSCut95915)

■Resolved an issue where, if you configured a link aggregated group (LAG) to use link aggregation control protocol (LACP) and the LAG interfaces experienced heavy broadcast traffic, the LAG interfaces entered a forced down state. (CSCuu04209)

■Resolved an issue where you experienced system issues if the cloud continuously checked for a new update. (CSCuu04844)

■The system will generate an alert if you attempt to create two correlation policies with an identical name. (CSCuu14720)

■Resolved an issue where, if you downgrade an ASA5585-X device to an older version, Linux did not downgrade when it should have. (CSCuu14965)

■Resolved an issue where the system displayed the incorrect amount of memory usage on the System Load dashboard widget. (CSCuu19742)

■Improved CPU performance reporting for the Simple Network Management Protocol (SNMP) agent on physical Series 3 devices. (CSCuu31029)

■Improved CPU performance. (CSCuu35011)

■Resolved an issue where, if an ASA5506-X device running ASA platform version 9.3(3) or 9.4(1) experienced issues, the device stopped processing traffic. (CSCuu38535)

■Resolved an issue where excessive memory usage caused the system to restart processes that potentially caused loss of network connectivity. (CSCuu88135)

■Resolved an issue where, if you clicked the Edit icon near the configurable Relay Host option while generating a report from the Report page, the web browser redirected to a internal server error web page. (CSCuv01286)

Issues resolved in Version 5.4.1.1 and Version 5.4.0.2:

■ Security Issue Addressed multiple vulnerabilities in SSLv3 that allowed external attacks on client connections, as described in CVE-2014-3569, CVE-2014-3570, CVE-2014-3572, and CVE-2015-0204.

■ Security Issue Addressed an arbitrary script injection vulnerability allowing unauthenticated, remote attackers to exploit GNU C library DNS resolution functionality, as described in CVE-2015-0235.

■ Security Issue Resolved multiple cross-site scripting (XSS) and arbitrary HTML injection vulnerabilities. (CSCus03591, CSCus03762, CSCus04436, CSCus07858, CSCus07875)

■ Security Issue Resolved a vulnerability in Universal Unique Identifier (UUID) manipulation. (CSCus06097)

■Resolved an issue where, if you edited a local rule on the intrusion rule editor when viewing rule documentation, the system displayed the current local rule configuration for already-generated event data instead of the rule configuration that triggered it. (145118/CSCze95346)

■Resolved an issue where, if you backed up and restored a Defense Center, Security Intelligence objects were not backed up or restored. (CSCur42337, CSCur35624)

■Resolved an issue on Series 3 managed devices where inline connectivity could be lost for up to 25 seconds on bypass-enabled inline sets during device reboot. (CSCur64678)

■Resolved an issue where, in some cases, you were not able to get URL category or URL reputation information. (CSCur38971, CSCus59492)

■Resolved an issue where the system did not display the associated hosts if you expanded a vulnerability based on a client application from the vulnerabilities tab of the Network Map. (CSCur86191)

■Resolved an issue where, in some cases, the host did not always display the block page if one of your access control rule actions was set to block or interactive block. (CSCus06868)

■Resolved an issue where the system did not support generating multiple report types when using Windows File Sharing (SMB) due to unsupported characters in the report name. (CSCus21871)

■Resolved an issue where, if you create an SSL policy set to Do Not Decrypt and attempted to establish a session, the system erroneously reported the session was blocked when it was not. (CSCus41127)

■Resolved an issue where, if you placed an access control rule referencing a file policy with a Block Malware rule positioned after an access control rule with a web application condition, the system did not identify malware files. (CSCus64393, CSCus64526)

■Resolved an issue where, if both the management interface and the control interface of your system used the same VLAN and the management interface used an IPv6 address, the management interface was inoperable. (CSCus64678)

■Resolved an issue where, if your system included an SSL Visibility Appliance (SSLVA) or a Cisco SSL Appliance and you created a file policy containing a web application category and a Block Malware rule, your first attempt to download a file over HTTPS failed. Note that this issue is resolved when the SSL appliance is running Version 3.8.4. (CSCus72505)

■Resolved an issue where the system experiences issues if you applied an access control policy referencing a URL Filtering license, Security Intelligence license, and an SSL policy configured for inspection on any of the following devices: the 7000 Series, ASA5506-X, ASA5506H-X, and the ASA5506W-X. (CSCut02823)

■Improved pruning for correlation event tables. (CSCut02984)

■Resolved an issue where, if you created a file policy with Spero analysis and file capture enabled, the system did not capture files detected in incoming traffic. (CSCut06837)

■When an applied access control policy with a rule set has all source IPv4 addresses, the system evaluates traffic with an IPv6 source address as if source addresses were not set in the rules. When an applied access control policy with a rule set has all source IPv6 addresses, the system evaluates traffic with an IPv4 source address as if source addresses were not set in the rules. When an applied access control policy with a rule set has all destination IPv4 addresses, the system evaluates traffic with an IPv6 destination address as if destination addresses were not set in the rules. When an applied access control policy with a rule set has all destination IPv6 addresses, the system evaluates traffic with an IPv4 destination address as if destination addresses were not set in the rules. (CSCut48596)

■Resolved a rare issue where, if a Series 3 device detected traffic targeted for stacked devices, the system experienced issues and could not process traffic. (CSCut53335)

Issues resolved in Version 5.4.1:

■ Security Issue Addressed multiple vulnerabilities in SSLv3 that allowed external attacks on client connections. The fix addresses CVE-2014-3566.

■ Security Issue Addressed an arbitrary script injection vulnerability allowing unauthenticated, remote attackers to execute commands via Bash. The fix addresses CVE-2014-6271 and CVE-2014-7169.

■ Security Issue Resolved an unauthorized vulnerability in Universal Unique Identifier (UUID) manipulation.

■ Security Issue Resolved cross-site scripting (XSS) vulnerabilities in the host attribute.

■ Security Issue Resolved an HTML injection vulnerability.

■Improved the speed of reloading Snort configurations during access control policy apply. (112070/CSCze87966, CSCur19687)

■Resolved an issue where, if you created an SSL policy with the Session Not Cached option set to Do Not Decrypt or Block and SSL session reuse enabled, the system displayed uncached session errors in the SSL Status column of the Connection Events table view when the session refreshed. (143335/CSCze93608).

■Resolved an issue where the system did not display data for the Network Analysis Policy column of the Intrusion Events table view and the Connection Events table view if you registered a device running Version 5.3.X to a Defense Center running Version 5.4. (143349/CSCze94484)

■Resolved an issue where the system failed to recover if you attempted to reboot your clustered Series 3 devices after the devices went to maintenance mode and experienced a power failure. (143504/CSCze94928)

■Updated the FireSIGHT System User Guide to reflect that applying an access control policy may cause a short pause in traffic flow and processing. (143514/CSCze94971)

■Access control policies now have logging capabilities for Log at Beginning and End of Connection, Log at End of Connection, and No Logging at Connection. (143507/CSCze94975)

■Resolved an issue where, if the system generated file events, the system incorrectly truncated file event filenames containing colons on several pages of the web interface. (143666/CSCze94954)

■Resolved an issue where, if you disabled an access control rule containing either an intrusion policy or a variable set that was different from any enabled access control rules, policy apply failed and the system experienced issues. (143871/CSCze94114, 144635/CSCze95200)

■Improved diskmanager cleanup during report generation. (143933/CSCze94240, 143934/CSCze94286)

■Resolved an issue where multiple IP addresses were incorrectly displayed for a single host profile. (144259/CSCze94623)

■Resolved an issue where decrypted SSL sessions displayed URLs in connection logs as http:// instead of https://. (144485/CSCze95739)

■Resolved an issue where, if you created a custom network variable named identically to a default variable but with different capitalization, the system incorrectly assumed the custom variable and the default variable were the same and prevented you from deleting the custom variable. (144488/CSCze95591, 144544/CSCze95599)

■Resolved an issue where, if you enabled your Defense Center or managed device’s eth1 for DHCP, the system incorrectly saved the configuration with DHCP enabled for both eth0 and eth1. (144525/CSCze95666)

■Resolved an issue where, if you applied an access control policy with archive file types enabled on a device running a vulnerability database (VDB) older than Version 211, policy apply failed. (144533/CSCze95570)

■Resolved an issue where the system treated DNS traffic as OpenVPN, QQ, and Viber traffic. (144548/CSCze95536)

■Resolved an issue where rule or packet latency thresholding timers could not be disabled. (144555/CSCze95704)

■Resolved an issue where, if you created a link aggregation group (LAG) interface on a NetMod connected to an 8000 Series managed device and then powered down the device, removing the NetMod after powering down caused errors. (144576/CSCze95166)

■Resolved an issue where removing the URL Filtering license from your system caused a disruption in cloud connectivity. (144578/CSCze95183)

■Resolved an issue where, if you used the SFR system restart CLI command on the ASA5506-X device while logged in via the ASA session command, the device stopped processes and did not restart them. (144609/CSCze94873)

■Resolved an issue where, if you created an HTML report, the web browser incorrectly displayed the report as binary data. (144667/CSCze95195)

■Resolved an issue where importing and exporting Defense Center policies failed. (144806/CSCze95396, 144905/CSCze96093)

■Resolved an issue where defining a large range of ports for source ports or destination ports caused policy apply to fail. (144933/CSCze95305)

■Resolved an issue where the system experienced a FSIC failure during update. (144964/CSCze95780)

■Resolved an issue where, if you attempted to establish a private cloud connection without utilizing the proxy option, the system attempted to connect to the private cloud via proxy even if you unchecked the use proxy option. (144968/CSCze95801)

■Resolved an issue where automatic update failed if you attempted to download updates while managing an X-Series device. (145060/CSCze95372)

■Resolved an issue where the user interface provided the incorrect patch release when you attempted to update your system with the Download Updates button. (145174/CSCze95284)

■Resolved an issue where, at altitudes of 2000 feet or higher, the AMP8150 emitted excessive noise due to inlet fans running at 20,000 RPM or faster, despite reported fan speeds as low as 0 RPM. Updating the BMC firmware or applying this update resolves the issue in the firmware, but to resolve temporarily until you can update, use the ipmi mc reset cold CLI command to reset the AMP8150 Baseboard Management Controller (BMC). Note that you must reestablish your Serial Over Lan (SOL) session after reset. (CSCus59936)

■Resolved an issue where the Inline Normalization preprocessor incorrectly resized packets when the Trim Data to Window option was enabled. (CSCur80901)

Issues resolved in Version 5.4:

■ Security Issue Addressed multiple vulnerability issues in Linux and other third parties as described in CVE-2013-0343, CVE-2013-2164, CVE-2013-2206, CVE-2013-2232, CVE-2013-2234, CVE-2013-2888, CVE-2013-3552, CVE-2013-4387, CVE-2013-4470, CVE-2013-4786, CVE-2007-6750, CVE-2013-7263, CVE-2013-7265.

■ Security Issue Addressed multiple injection vulnerabilities, including HTML and command line injections.

■ Security Issue Addressed multiple cross-site scripting (XSS) vulnerabilities.

■ Security Issue Addressed multiple cross-site request forgery (CSRF) vulnerabilities.

■ Security Issue Addressed multiple parameter manipulation and misconfiguration vulnerabilities.

■If you configure an access control rule to Block, Block with reset, Interactive block, Interface Block with reset, or Monitor, selecting a reputation level also selects all reputations more severe than the selected level. If you configure an access control rule to Allow or Trust, selecting a reputation level also selects all reputations less severe than the selected level. (111747/CSCze87908)

■The system now prevents you from using IPv6 addresses to configure connections to the User Agent. (124377/CSCze88700)

■Resolved an issue where, in some cases, the system included extraneous data in intrusion event performance graphs. (124934/CSCze87728)

■Improved the functionality of eStreamer performance metrics. (129840/CSCze89231)

■Resolved an issue where large system backups failed if disk space usage exceeded the disk space threshold before pruning. (132501/CSCze88368)

■Resolved an issue where using the RunQuery tool to execute a SHOW TABLES command caused the query to fail. (132685/CSCze89153)

■Resolved an issue where, in some cases, performing remote backups of managed devices generated large backup files on your Defense Center. (133040/CSCze89204)

■You can now edit the maximum transmission unit (MTU) of a managed device via the Interface tab of the Management Interfaces page ( System > Local > Configuration > Management Interfaces) on the managed device’s web interface. You can no longer edit the MTU of management interfaces of managed devices from the Defense Center. (133802/CSCze89748)

■Resolved an issue where the syslog alert message for events generated by intrusion rules with preprocessor options enabled caused a Snort Alert message instead of a customized message. (134270/CSCze88831)

■Resolved an issue where remediation failed if you configured an Nmap scan remediation with the Fast Port Scan and the Use Port from Event options enabled. (134499/CSCze88810)

■Resolved an issue where, if you enabled end-of-connection logging on a system in high availability, the system did not report sessions or reported an incorrect time stamp if the session was terminated prematurely. (134806/CSCze89822)

■Resolved an issue where communication issues between the Defense Center and cloud did not generate a health alert. (134888/CSCze90122)

■Resolved an issue where the system did not resolve host names associated with IPv6 addresses as expected in the dashboard or event views if you enabled Resolve IP Addresses from the Event View Settings page. (135182/CSCze90155)

■Custom HTTP response pages now support up to 50,000 plaintext characters. (136295/CSCze90383)

■Resolved an issue where the system displayed an incorrect number of submitted IP addresses in the tooltips on the Security Intelligence tab if you specified a Feed URL previously created on a computer running a Windows operating system. (136557/CSCze89888)

■Resolved an issue where, if you disabled a physical interface on a managed device, the status of the logical interfaces associated with the physical interface remained green on the Interfaces tab of the editor even though they were disabled. (136560/CSCze89894)

■Resolved an issue where the Defense Center displayed different task statuses on the Task Status page, the Access Control Policy page, and the Device Management page of the web interface if you applied an access control policy to multiple devices. (136614/CSCze89936)

■Resolved an issue where a custom intrusion rule with a TCP protocol condition generated events based on UDP traffic instead of TCP traffic. (136843/CSCze89941)

■Resolved an issue where the captured files table was erroneously listed as an option for a custom table base. (136844/CSCze89977)

■Resolved an issue where the system generated false positives for the 145:1, 145:2, 145:3, 145:4, 145:5, and 145:6 DNP3 preprocessor rules. (137145/CSCze90786)

■Resolved an issue where, if you registered a managed device with a hostname containing more than 40 characters, device registration failed. (137235/CSCze90144)

■Resolved an issue where the system did not correctly filter objects in the Object Manager if you included any of the following special characters in the filter criteria: dollar sign ($), caret (^), asterisk (*), brackets ([ ]), vertical bar (|), forward slash (\), period (.), and question mark (?). (137493/CSCze90413)

■Resolved an issue where, if you enabled Simple Network Management Protocol (SNMP) polling in your system policy and modified the interface configuration on one of your clustered managed devices, the system generated inaccurate SNMP polling requests. (137546/CSCze90000)

■Resolved an issue where enabling syslog or Simple Network Management Protocol (SNMP) connection logging in an access control rule caused system issues. (137952/CSCze90538)

■Resolved an issue where the table view of file events appeared to support viewing the file trajectory by file name even without a calculated SHA256 value. (138155/CSCze90676)

■Resolved an issue where the system did not display UTF-8 characters in the x-axis filenames if you generated a report in HTML or PDF format that included a chart with File Name as the x-axis. (138297/CSCze90799)

■Resolved an issue where, in rare cases, revising and reapplying an intrusion policy hundreds of times caused intrusion rule updates and system updates to require over 24 hours to complete. (138333/CSCze90747)

■Resolved an issue where the system generated an error message if you attempted to update the geolocation database (GeoDB) to the version already installed on your Defense Center. (138348/CSCze90813)

■Resolved an issue where connection events logged to an external syslog or Simple Network Management Protocol (SNMP) trap server had incorrect URL Reputation values. (138504/CSCze91066)

■Resolved an issue where applying more than one access control policy across your deployment and searching for intrusion or connection events matching a specific access control rule retrieved events generated by unrelated rules in other policies. (138542/CSCze91690)

■Resolved an issue where cutting and pasting access control rules appeared to be supported. (138713/CSCze91012)

■Resolved an issue where, if your Defense Center was running Version 5.3 with eStreamer running Version 5.3, the security intelligence events on your Defense Center incorrectly reversed the values of the destination IP and the source IP. (138740/CSCze91402)

■Resolved an issue where the system did not generate a warning about ignored inline normalization settings if you applied an intrusion policy set to drop when inline to a device with passive interfaces. (139177/CSCze91163)

■Resolved an issue where, in rare cases, the Task Status page incorrectly reported a failed system policy apply was successful. (139428/CSCze92142)

■Resolved an issue where the system did not enforce the maximum transmission unit (MTU) setting on Series 2 or virtual devices. (139620/CSCze91705)

■Resolved an issue where, if you configured and saved three or more intrusion policies that referenced each other through their base policies, the system did not update the Last Modified dates for the policies on the Intrusion Policy page. (139647/CSCze91353)

■Resolved an issue where, if you configured and saved a report with a time window that included the transition day from observing Daylight Saving Time (DST) to not observing DST, the system adjusted the time window to begin an hour earlier than specified. (139713/CSCze91697)

■Resolved an issue where, if you switched interfaces between the virtual routers on your managed devices, the system did not activate the dormant static route for the switched interfaces. (139929/CSCze91619)

■Resolved an issue where, if you did not register a device to your Defense Center and your Defense Center had no data, viewing the Intrusion Events Graph page ( Overview > Summary > Intrusion Event Graphs) caused a WARNING: normalizations disabled because not inline error. (140117/CSCze92324)

■Resolved an issue where the system did not prevent an externally authenticated user from modifying their password using the FireSIGHT System web interface. (140143/CSCze91938)

■Resolved an issue where custom HTTPS certificates could be imported only once. (140283/CSCze92162)

■Resolved an issue where creating a new task on the Scheduling page ( System > Tools > Scheduling) caused the system to display an authorization error message. (140575/CSCze92225)

■Resolved an issue where bypass mode appeared as an option for clustered devices even though the option could not be enabled. (140604/CSCze92047)

■Resolved an issue where reports created in bar graph form displayed a maximum of 10 days. (140833/CSCze92405)

■Resolved an issue where the Password Lifetime column on the User Management page displayed a negative value if a user’s password expired. (140839/CSCze92338)

■Resolved an issue where, if you disabled an access control rule referencing an intrusion policy and then reapplied your access control policy, the system incorrectly indicated the appliance’s intrusion policy was out of date. (141044/CSCze92012)

■Resolved an issue where you could not delete third-party vulnerabilities. (141103/CSCze92621)

■Resolved an issue where files intentionally not stored by the system incorrectly appeared with a Failed File Storage value in the event viewer and dashboard. (141196/CSCze92629)

■Resolved an issue where the system-provided saved search Public Addresses Only included the private 172.16.0.0/12 IP address range. (141285/CSCze92654)

■Resolved an issue where, if you updated your Defense Center to Version 5.4, the update wrote over any changes made to the Connection Summary dashboard ( Overview > Dashboards > Connection Summary). (141363/CSCze92812)

■Resolved an issue where reports did not resolve host names for IP addresses. (141393/CSCze92797)

■Resolved an issue where, if you enabled HTTP Block Response in an access control policy and the web server’s operating host reached its open connection limit, HTTP Block Response caused sessions to remain open and the web server to time out. (141440/CSCze92753)

■Resolved an issue where excessive saved revisions to the intrusion policy caused system performance issues. (141501/CSCze92792)

■Resolved an issue where the passive interfaces not in security zones on 3D9900 devices did not generate intrusion or connection events. (141663/CSCze93022)

■You can now enable rules from the packet view of a generated event when you select the Set this rule to generate events in all locally created policies option from the actions menu. (142058/CSCze93416)

■Resolved an issue where, in rare cases, Series 3 devices experienced delays during device shutdown. (142110/CSCze93561)

■Resolved an issue where, if the Defense Center sent a file to the cloud to perform a dynamic analysis in a sandbox environment and the cloud was not available within 50 minutes, the file’s status remained Sent for Analysis instead of a timed out status. (142309/CSCze93757)

■Resolved an issue where, if the Defense Center incorrectly assigned an invalid serial header, the Defense Center failed to send events to the eStreamer client. (143201/CSCze93686)

■Resolved an issue where, if you clicked on an application in the Denied Connections by Application dashboard widget, the system did not properly constrain the resulting event view to blocked connections. (143376/CSCze93645)

■Resolved an issue where, if you generated a report in CSV format only, report section queries would ignore the option to inherit the time window. (143403/CSCze94376)

■Resolved an issue where the Modbus preprocessor failed to generate events after the system missed or dropped a packet. (142450/CSCze95921)

■Resolved an issue where, if you created an access control policy that referenced an SSL policy set to decrypt traffic, policy apply failed. (144518/CSCze94864)

■Resolved an issue where, if you created an intrusion policy or network analysis policy and added a shared layer to it, then exported and imported the new policy the system generated a Back-end failed for import error and did not import the policy. (144905/CSCze96093)