Release Notes for Cisco IOS Release 15.5(3)M for the Cisco ISR829 Integrated Services Router

Release Notes for Cisco IOS Release 15.5(3)M for the Cisco ISR829 Integrated Services Router

---

The following release notes support Cisco IOS Releases 15.5(3)M and higher releases. These releases support the Cisco ISR829 Integrated Services Router. These release notes are updated to describe new features, limitations, troubleshooting, recommended configurations, caveats, and how to obtain support and documentation.

Contents

This publication consists of the following sections:

• Image Information and Supported Platforms
• Related Documentation
• Caveats
• Obtaining Documentation and Submitting a Service Request

Image Information and Supported Platforms

Note You must have a Cisco.com account to download the software.

Cisco IOS Release 15.5(3)M includes the following Cisco IOS images:

• ir800-universalk9-bundle.155-3.M.bin

Cisco IOS Release 15.5(3)M includes support for the following IR800 series routers:

• IR829GW-LTE-GA-EK9
• IR829GW-LTE-GA-ZK9
• IR829GW-LTE-NA-AK9
• IR829GW-LTE-VZ-AK9

Note The ir800-universalk9-bundle.155-3.M.bin bundle must be copied via tftp to the IR829, and then installed using the bundle install flash:<image name> command. The ir800-universalk9-bundle.155-3.M.bin file can NOT be directly booted using the boot system flash:/image_name. Detailed instructions are found in the Cisco IR829 Integrated Services Router Hardware Installation Guide.

Note Do not configure ip ssh version 1, otherwise the bundle installation will fail.

Caution A problem exists where the MCU upgrade fails to complete and the IR829 stays in bootloader mode. The router will get stuck in ROMMON and must be RMA to Cisco. The IR829 should only be upgraded to IOS version 15.6(3)M x. For example:
If the IR829 is running 15.5(3)M1, DO NOT upgrade to 15.5(3)M2. Go straight to 15.6(3)M x.

---

Related Documentation

The following documentation is available:

• Cisco IOS Release Notes
• Getting Started and Product Document of Compliance for the Cisco IR829 Integrated Services Router

http://www.cisco.com/c/dam/en/us/td/docs/routers/access/800/829/78-100611-01B0.pdf

• Cisco IR829 Integrated Services Router Hardware Installation Guide

http://www.cisco.com/c/dam/en/us/td/docs/routers/access/800/829/829-HIG-7-15.pdf

• Software manuals - all of the 800 series router documentation

http://www.cisco.com/c/en/us/support/routers/800-series-routers/tsd-products-support-series-home.html

• Most of the Cisco IR829 configuration tasks are available in the Cisco 800 Series Integrated Services Routers Software Configuration Guide

http://www.cisco.com/c/en/us/td/docs/routers/access/800/software/configuration/guide/SCG800Guide.html

• Configuring Wireless Devices - common tasks between C800 and IR829 series

http://www.cisco.com/c/en/us/td/docs/routers/access/800/software/configuration/guide/SCG800Guide/SCG800_Guide_BookMap_chapter_01001

• Cisco 4G LTE Software Installation Guide - common tasks between C800 and IR829 series

http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/software/feature/guide/EHWIC-4G-LTESW.html

Known Limitations

This release has the following limitations or deviations for expected behavior:

• The IR829 series is feature equivalent to the to C8xx series, however, support for this initial release has not implemented or validated for all features.

For example:

C8xx supports the following features under Ge0:

IR8xx supports the following:

• The IR829 only supports software encryption in this release. Hardware encryption will be added in the next software release (MR1).
• Show led command has a lag from the actual LEDs at first, then it stabilizes.
• Changing the default Guest OS CPU allocation may after the router performance. Detailed instructions are found in the Cisco IR829 Integrated Services Router Hardware Installation Guide.

Caveats

Caveats describe unexpected behavior in Cisco IOS releases. Caveats listed as open in a prior release are carried forward to the next release as either open or closed (resolved).

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html.

Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.