Cisco Prime Cable Provisioning Release Notes, 7.0
Available Languages
Table of Contents
Cisco Prime Cable Provisioning 7.0 Release Notes
Important Points to Know Before You Begin
Prime Cable Provisioning 7.0 Bugs
Obtaining Documentation and Submitting a Service Request
Introduction
Cisco Prime Cable Provisioning, referred to as Prime Cable Provisioning throughout this document, automates the tasks of provisioning and managing customer premises equipment (CPE) in a broadband service-provider network. The application provides a simple and easy way to deploy high-speed data, voice technology, and home networking devices.
Prime Cable Provisioning can be scaled to suit networks of virtually any size, even those deploying millions of devices. It also offers high availability, made possible by its distributed architecture with centralized management.
Prime Cable Provisioning incorporates support for many technologies to provide provisioning services for your network. These technologies include:
- DOCSIS high-speed data
- PacketCable voice service, both Secure and Basic work flows
- Non-secure CableHome
- Open Cable Set top box
- eRouter 1.0
- DPoE (DOCSIS Provisioning of EPON) 2.0
- RPD
For detailed information about Prime Cable Provisioning features, see the Cisco Prime Cable Provisioning User Guide 7.0.
Important Points to Know Before You Begin
- Before installing PCP 7.0, please check the system requirements mentioned in the Cisco Prime Cable Provisioning Quick Start Guide 7.0 are met.
- If you are migrating from an earlier version of Cisco PCP or BAC to Cisco PCP 7.0, you must review the Release Notes that were published across the releases.
- License acquired for Cisco PCP 5.x or earlier releases is not valid for Cisco PCP 7.0. You need to get the permanent or evaluation license of 7.0 to upgrade from 5.0.x/5.1.x/5.2.x/5.3.x/6.x to 7.0 or for a fresh installation. For more information, refer to Licensing Prime Cable Provisioning section in Cisco Prime Cable Provisioning Quick Start Guide 7.0.
- From PCP 6.0 release, the PCP does not support the Solaris operating system platform. The Solaris operating system was supported through the PCP 5.3.x releases and the last release that supported the Solaris operating system was PCP 5.3.2.1.
New Features and Enhancements
This release Cisco Prime Cable Provisioning 7.0, supports the following new features:
DPE Container
Prime Cable Provisioning 7.0 supports DPE Containers apart from the regular DPEs along with the multiple PG support.
System JDK
From Prime Cable Provisioning 7.0, JDK will not be available as part of PCP package and uses the JDK installed on your system. The path of the JDK has to be provided during the installation process.
Log4j2 Support
Prime Cable Provisioning 7.0 supports log4j2 which enhances the security by upgrading the log framework.
Prime Cable Provisioning 7.0 Bugs
For more information on a specific bug or to search all bugs in a particular Prime Cable Provisioning release, see Using the Bug Toolkit.
Open Bugs
Table 2 Open Bug List in Prime Cable Provisioning 7.0.
Using the Bug Toolkit
This section explains how to use the Bug Toolkit to search for a specific bug or to search for all bugs in a release.
Step 1
Go to Cisco Bug Search Tool.
Step 2 At the Log In screen, enter your registered Cisco.com user name and password; then, click Log In. The Bug Search Tool page opens.
Note If you do not have a Cisco.com user name and password, you can register for them at https://idreg.cloudapps.cisco.com/idreg/register.do.
Step 3 To search for a specific bug, enter the bug ID or keywords in the Search for field, and click Go.
Step 4 To search for bugs in the current release, specify the following criteria:
- Select Product —Series/Model
- Select Product Name—Cisco Broadband Access Center for Telco and Wireless
Note Do not enter Cisco Prime Cable Provisioning. Cisco Prime Cable Provisioning is the new product name for the former Cisco Broadband Access Center. At this time, the Bug Search Tool does not accept Cisco Prime Cable Provisioning as the product name.
Step 5 Click on the page. The Bug Search Tool displays the list of bugs based on the specified search criteria.
Note For example, if a bug applies to multiple releases, the headline and Release-note enclosure contain the earlier Cisco PCP product terminology.
Step 6 To export the results to a spreadsheet:
1. In the results section of the page, click Export Results to Excel.
2. All bugs retrieved by the search are exported in to a spreadsheet and downloaded locally.
If you cannot export the spreadsheet, log into the Technical Support website at http://www.cisco.com/cisco/web/support/index.html or contact the Cisco Technical Assistance Center (TAC).
Note For more details about how to use Cisco Bug Search Tool, see https://www.cisco.com/web/applicat/cbsshelp/help.html
Product Documentation
Note We sometimes update the printed and electronic documentation after original publication. Therefore, you should also review the documentation on Cisco.com for any updates.
See the Cisco Prime Cable Provisioning Documentation Overview for the list of Prime Cable Provisioning guides.
See the Cisco Prime Network Registrar Documentation Overview for the list of Cisco Prime Network Registrar guides.
See the Prime Cable Provisioning Upgrade Matrix for the upgrade compatibility of the current release with the previous releases.
See the Prime Cable Provisioning Compatibility Matrix for the PNR, PG and API compatibility of the current release with the
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
Subscribe to the What’s New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.
Trademark Notice
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
FeedbackContact Cisco
- Open a Support Case
- (Requires a Cisco Service Contract)