What's New in Cisco IOS XR Release 7.10.1
Cisco IOS XR Release 7.10.1 is a new feature release for Cisco NCS 540 Series routers. For more details on the Cisco IOS XR release model and associated support, see Guidelines for Cisco IOS XR Software.
New in Documentation
This release introduces rich and intuitive ways for you to access YANG data models supported in the Cisco IOS XR software.
| Product | Description |
|---|---|
|
Search by release number, error strings, or compare release numbers to view a detailed repository of error messages and descriptions. |
|
|
Select the MIB of your choice from a drop-down to explore an extensive repository of MIB information. |
|
| YANG Data Models Navigator |
We have launched the tool as an easy reference to view the Data Models (Native, Unified, OpenConfig) supported in IOS XR platforms and releases. You can explore the data model definitions, locate a specific model, and view the containers and their respective lists, leaves, leaf lists, Xpaths, and much more. As we continue to enhance the tool, we would love to hear your feedback. You are welcome to drop us a note here. |
|
Use Case-based Documentation at Learning Labs |
You can now quickly explore and experiment on use-cases without setting up any hardware resources with the new Interactive documentation for Cisco 8000 routers on DevNet Learning Labs. Powered by Jupyter, the automated code blocks within the documentation enable you to configure the desired functionality on the routers and retrieve real-time output swiftly. Check out the new interactive documentation here: |
Software Features Enhanced and Introduced
To learn about features introduced in other Cisco IOS XR releases, select the release from the Documentation Landing Page.
The following features are supported on all the NCS 540 router variants.
| Feature | Description |
|---|---|
|
BGP |
|
|
Reduce Recursions for eBGP Peering on Loopback Address on Bridge-Group Virtual Interface |
You can now achieve eBGP peering on Loopback interfaces on Bridge-Group Virtual Interface (BVI) and reduce the recursion level from three to two. This reduction in the recursion level, achieved by removing the need to use the BVI name in the configuration of static routes, allows faster packet forwarding and better utilization of network resources. |
|
Segment Routing |
|
|
IS-IS Partition Detection and Leakage of Specific Route Advertisements |
In an open ring topology, a single fiber cut may partition the area or domain into two pieces. With summarization enabled, the area (domain) partition may result in traffic drops. Depending on the configuration in the Area Border Routers (ABRs) or Autonomous System Boundary Routers (ASBRs) that is picked as an entry point to the partitioned area (domain), the traffic is delivered to its destination or dropped as unreachable at ABR or ASBR. IS-IS partition detection and leakage of specific route advertisements features are introduced to retain connectivity for the partitioned area (domain) when summarization is used. The ABRs or ASBRs detect a network partition within an area (domain) and upon detection, ensure that the summary route is replaced with specific route advertisements in IS-IS. The feature introduces these changes: New Command: Modified Command:
YANG Data Model:
|
|
You can now hardware offload the liveness monitoring in performance measurement to the router hardware, which is the Network Processing Unit (NPU). This feature helps you optimize and scale the measurement operation, helping you meet delay-bound Service Level Agreements (SLAs). Previously, this feature was software driven. This feature introduces a new keyword npu-offload under the performance-measurement liveness-profile name liveness profile command. |
|
|
Configurable Filters for IS-IS Advertisements to BGP-Link State |
This feature allows you to configure a route map to filter IS-IS route advertisements to BGP-Link State (LS). It also provides a per-area configuration knob to disable IS-IS advertisements for external and propagated prefixes. This configuration of filters hence reduces the amount of redundant data for external and interarea prefixes sent to the BGP - LS clients. This feature introduces exclude-external, exclude-interarea, and route-policy name optional keywords in the distribute link-state command: |
|
Starting from this release, Multicast Nonstop Forwarding supports Tree-SID (Tree Segment Identifier). This ensures that traffic forwarding continues without interruptions whenever the active RSP fails over to the standby RSP. This feature prevents hardware or software failures on the control plane from disrupting the forwarding of existing packet flows through the router for Tree-SID. Thus, ensuring improved network availability, network stability, preventing routing flaps, and no loss of user sessions while the routing protocol information is being restored. The feature modifies the show mrib nsf private command. |
|
|
This feature allows Dynamic Tree Segment Identifier (Tree-SID) deployment where IPv6 Multicast payload is used for optimally transporting IP VPN multicast traffic over the provider network, using SR-PCE as a controller. This implementation supports IPv6 only for the Dynamic Tree-SID. Currently, the Static Tree-SID supports IPV4 payloads only, not the IPv6 payloads. |
|
|
IP Addresses and Services |
|
|
You can now experience faster packet processing and save NPU cycles by avoiding the recycling of packets within the router. This is made possible by enabling the single-pass egress ACL which avoids multiple round-trips of packets in the ingress-to-egress path, thereby eliminating the need for additional packet processing. Also, because the match criteria requirement for a single-pass egress IPv6 ACL is reduced, the TCAM key size is reduced. This feature introduces the hw-module profile acl ipv6 single-pass-egress-acl command. |
|
|
L2VPN and Ethernet Services |
|
|
You can save the consumption of network bandwidth by preventing the replication of Broadcast, Unknown unicast and Multicast (BUM) traffic towards EVPN core and attachment circuits (AC). This feature not only prevents the replication of BUM traffic but also ensures that only the designated router receives the BUM traffic. The feature introduces these changes: CLI: New commands. YANG Data Model:
|
|
|
You can now use the EVPN link bandwidth to set proportional multipath on Virtual Network Forwarders (VNFs) connected to Top of Racks (ToRs). You can advertise the link bandwidth extended community attribute for each path in a network. When you enable EVPN link bandwidth on multiple paths, the bandwidth values of these paths are aggregated and the cumulative bandwidth is advertised across the VNFs. The load metrics is installed in Routing Information Base (RIB) and the RIB redistributes nexthop prefixes to the paths to achieve proportional multipath. This allows distribution of traffic proportional to the capacity of the links across all the available Virtual Network Forwarders (VNFs) that facilitates optimal traffic load balancing across the VNFs. The feature introduces these changes: CLI: |
|
|
You can now facilitate optimal traffic load balancing across the Virtual Network Forwarders (VNFs) and minimize control plane updates when the VNFs or virtual machines (VMs) are moved across Top of Racks (ToR) by setting the EVPN gateway IP address in the EVPN route type 5 network layer reachability information (NLRI) that advertises IPv4 and IPv6 addresses. With this functionality, only one IP prefix route is withdrawn ensuring fast traffic switchover and reduced convergence time in the event of failure. Previously, the gateway IP address field in the EVPN route type 5 NLRI was not used. By default, the NLRI advertisement included the EVPN gateway IP address of zero, which was represented as 0.0.0.0 for IPv4 and :: for IPv6. This resulted in the withdrawal of all prefixes one by one in the event of a failure, leading to traffic loss. The feature introduces these changes: CLI: |
|
|
Modular QoS |
|
|
This release introduces the functionality to preserve IP DSCP markings for IPv6 SR-TE traffic and covers the following scenarios:
With preservation, traffic with IPv6 packets with DSCP marking for priority, flows as intended and there’s no drop in traffic because of incorrect or missing labels. In previous releases, irrespective of the number of MPLS labels, when the EXP values were copied into the packet header during imposition, even the IP DSCP markings for IPv6 traffic were modified. This modification resulted in traffic drops at the next-hop routers in SR-TE tunnels. This feature introduces a new keyword, v6uc-enable , in the hw-module profile mpls-ext-dscp-preserve command. |
|
|
MPLS |
|
|
We have optimized network performance and enabled efficient utilization of resources for numbered tunnels based on real-time traffic by automatically adding or removing tunnels between two endpoints. This is made possible because this release introduces support for auto-bandwidth TE++ for numbered tunnels, expanding upon the previous support for only named tunnels, letting you define explicit paths and allocate the bandwidth to each tunnel. This feature introduces these changes: CLI:
YANG Data Model: New XPaths for Cisco-IOS-XR-mpls-te-cfg.yang (see GitHub, YANG Data Models Navigator) |
|
|
Multicast |
|
|
Draft-Rosen Multicast VPN (Profile 0) in PIM Sparse Mode (SM) |
Draft-Rosen Multicast VPN (Profile 0) is now supported in PIM sparse mode (PIM-SM) between the PE routers that are running in VRF mode. PIM SM provides precise control in cases of large multicast traffic when there is less bandwidth available. This control is possible because it uses a temporary Rendezvous Point (RP) router to connect the multicast traffic source to the next hop router. Prior to this release, Profile 0 was supported only in PIM Source Specific Multicast (SSM) mode. |
|
Netflow |
|
|
This feature introduces support for simultaneous L2 and L3 flow monitoring. Now, you can configure IP Flow Information Export (IPFIX) to actively monitor and record end-to-end L2 and L3 flow information elements from network devices. Previously, only L2 or L3 flow could be monitored at a time. This feature introduces these changes: CLI: The following sub-menus are introduced for these commands:
|
|
|
Programmability |
|
|
Improved YANG Input Validator and Get Requests |
The OpenConfig data models provide a structure for managing networks via YANG protocols. With this release, enhancements to the configuration architecture improve input validations and ensure that the Get requests made through gNMI or NETCONF protocols return only explicitly configured OpenConfig leaves. |
|
Routing |
|
|
Autonomous System Boundary Router Isolation and Adjacency Control for LSA Overflows |
In a network employing an Autonomous System Boundary Router (ASBR) and other routers, you are now assured of uninterrupted traffic flow even if the ASBR generates LSAs that exceed the limit you configured. This is made possible as you can now isolate ASBRs and also control the duration of adjacency in the EXCHANGE or LOADING phase. By isolating the ASBR from its immediate neighbors, the remaining network topology can continue to function without disruption, effectively preventing any adverse impact on traffic flow. This approach also simplifies the recovery process, as manual intervention is only necessary for the immediate neighbors of the ASBR routers. This feature introduces these changes: CLI: YANG Data Model:
(see GitHub, YANG Data Models Navigator) |
|
System Management |
|
|
Cisco Smart Licensing on QDD-400G-ZR-S, QDD-400G-ZRP-S, and DP04QSDD-HE0 optics |
Cisco Smart Licensing is a cloud-based, flexible, automated software licensing model that enables you to activate and manage Cisco software licenses across your organization. Smart Licensing solution allows you to easily track the status of your license and software usage trends. Smart Licensing is now supported on the following optics: |
|
System Security |
|
|
Public Key-Based Authentication of SSH Clients on Cisco IOS XR Routers |
Introduced in this release on: NCS 5500 fixed port routers; NCS 5700 fixed port routers; NCS 5500 modular routers (NCS 5500 line cards; NCS 5700 line cards [Mode: Compatibility; Native]) You can now avail cryptographic strength and automated password-less log in while establishing SSH connections with the server. Along with password and keyboard-interactive authentication, Cisco IOS XR routers configured as SSH clients now support public key-based authentication. In this authentication method, passwords need not be sent over the network and hence, it provides an additional layer of security as well as aids in automation processes. This feature is available only for users locally configured on the router, not those configured on remote servers. Previous releases supported SSH public key-based authentication only for Cisco IOS XR routers configured as SSH servers. The feature introduces these changes:
|
The following feature is supported on N540-ACC-SYS, N540X-ACC-SYS, and N540-24Z8Q2C-SYS variants.
| Feature | Description |
|---|---|
|
Modular QoS |
|
|
You can now provide preference to a specific user assigned to a subinterface. With this feature, the bandwidth remaining ratio (BWRR) is applied at the parent traffic policy level to control the low-priority traffic at the subinterface level. During congestion, the subinterface with the higher BWRR gets more bandwidth allocation that allows traffic to flow. Earlier, the BWRR in H-QoS was supported only at the child policy level. Supported on the following Cisco NCS 540 variants:
|
|
The following features are supported on all the NCS 540 variants, but not supported on N540-ACC-SYS, N540X-ACC-SYS, and N540-24Z8Q2C-SYS variants.
| Feature | Feature |
|---|---|
|
Application Hosting |
|
|
Cisco Secure DDoS Edge Protection solution provides protection from Denial-of-Service (DDoS) attacks and helps to mitigate them. DDoS Edge Protection solution helps you to:
|
|
|
Programmability |
|
|
|
This unified data model enables you to encrypt management traffic using IPsec tunnels. |
|
L2VPN and Ethernet Services |
|
|
The EVPN port-active mode configuration is now modified to support hot standby. In a hot standby bundle interface, the main and subinterfaces remain up. This functionality ensures fast convergence of standby to active transition. Previously, the interfaces in a standby node would be down. During the failure and recovery of active node, the standby node transitions through the Out-of-Service (OOS) state to the Up state. If you still want the nodes to transition through the OOS state, use the access-signal out-of-service command to revert to the previous behavior. The feature introduces these changes: CLI: YANG Data Model:
|
|
The following feature is supported on N540-6Z14S-SYS-D, N540X-6Z18G-SYS-A/D, N540X-8Z16G-SYS-A/D, and N540X-4Z14G2Q-A/D variants.
| Feature | Description |
|---|---|
|
Network Synchronization |
|
|
This feature allows PTP traffic to flow over a bridged virtual interface. You can now configure PTP over BVI on the following Cisco NCS 540 router variants:
|
|
The following features are supported only on N540-24Q8L2DD-SYS router variant.
| Feature | Description |
|---|---|
|
Network Synchronization |
|
|
PTP support on N540-24Q8L2DD-SYS |
Based on the IEEE 1588-2008 standard, Precision Time Protocol (PTP) is a protocol that defines a method to synchronize clocks in a network for networked measurement and control systems. With this release, PTP Class C and class B performance are now supported on 1G, 10G, 25G, 40G and 100G port speeds on the N540-24Q8L2DD-SYS hardware. |
|
SyncE support on N540-24Q8L2DD-SYS |
SyncE provides synchronization signals transmitted over the Ethernet physical layer to downstream devices, while the Synchronization Status Message (SSM) indicates the quality level of the transmitting clock to the neighboring nodes, informing the nodes about the level of the network's reliability. Ethernet Synchronization Message Channel (ESMC) is the logical channel that uses an Ethernet PDU (protocol data unit) to exchange SSM information over the SyncE link. SyncE is now supported on the N540-24Q8L2DD-SYS hardware. |
YANG Data Models Introduced and Enhanced
This release introduces or enhances the following data models. For detailed information about the supported and unsupported sensor paths of all the data models, see the Github repository. To get a comprehensive list of the data models supported in a release, navigate to the Available-Content.md file for the release in the Github repository. The unsupported sensor paths are documented as deviations. For example, openconfig-acl.yang provides details about the supported sensor paths, whereas cisco-xr-openconfig-acl-deviations.yang provides the unsupported sensor paths for openconfig-acl.yang on Cisco IOS XR routers.
You can also view the data model definitions using the YANG Data Models Navigator tool. This GUI-based and easy-to-use tool helps you explore the nuances of the data model and view the dependencies between various containers in the model. You can view the list of models supported across Cisco IOS XR releases and platforms, locate a specific model, view the containers and their respective lists, leaves, and leaf lists presented visually in a tree structure.
To get started with using data models, see the Programmability Configuration Guide for Cisco NCS 540 Series Routers.
| Feature | Description |
|---|---|
|
Programmability |
|
|
Cisco-IOS-XR-crypto-act.yang |
The following new leaves are added to this Cisco native data model to enable public key-based authentication of users on Cisco IOS XR routers that are configured as SSH clients:
|
|
Cisco-IOS-XR-crypto-cepki-new-oper.yang |
A new container, |
|
Cisco-IOS-XR-l2vpn-cfg.yang |
This Cisco native data model is enhanced to support EVPN port-active with hot standby on bundle interfaces. |
|
Cisco-IOS-XR-um-hw-module-profile-cfg.yang |
This Cisco unified data model is enhanced to support optimization of EVPN BUM flood traffic. |
|
openconfig-bgp-neighbor.yang Version 9.1.0 |
With this release, the OpenConfig data model introduces the following changes:
Event-driven telemetry and Model-driven telemetry are supported. |
|
openconfig-isis.yang |
The OpenConfig data model defines the configuration and state information related to ISIS protocol configuration running on a router. With this release, you can configure the following XPaths:
Event-driven and Model-driven telemetry is supported. |
|
openconfig-system-grpc.yang Version 1.0.0 |
The OpenConfig data model is revised from version 0.1.1 to 1.0.0. This version enables the gRPC server to listen on any IP address bound to an interface and port of the system or listen for any specific list of IP addresses. The maximum number of supported IP addresses are 32, which may be IPv4 or IPv6, or both. Earlier, the gRPC server had the listen functionality for any IP address on the gRPC port but not to a specific list of listen addresses. Event-driven telemetry and Model-driven telemetry are supported. |
|
Cisco-IOS-XR-infra-xtc-agent-cfg.yang |
This Cisco native data model is used for gathering statistics on reporting of SR-Traffic Engineering (TE) policies using BGP-Link State (LS). |
|
Cisco-IOS-XR-um-router-isis-cfg.yang |
The latest update to the Cisco-IOS-XR-um-router-isis-cfg.yang unified data model includes the addition of the partition-detect and partition-repair containers. These new containers indicate the configuration of the partition-detect and partition-repair nodes. |
Hardware Introduced
 Note |
Before you install the Cisco router, you must prepare your site for the installation, for more details on site planning and environmental requirements, see Hardware Installation Guide. |
The following features are supported on all the NCS 540 router variants.
|
Hardware |
Description |
|---|---|
|
Alarm reporting change on ZR and ZR+ Optics |
Unlike in previous releases where the loss of payload signal on ZR and ZR+ optics triggered both Loss of Signal - Payload (LOS-P) and Loss of Link (LOL) alarms, from this release onwards, only the Loss of Signal - Payload (LOS-P) is raised. |
The following feature is supported on all the NCS 540 variants, but not supported on N540-ACC-SYS, N540X-ACC-SYS, and N540-24Z8Q2C-SYS variants.
|
Hardware |
Description |
|---|---|
|
Optics |
This release launches 400G Digital Coherent QSFP-DD transceiver optics on selective hardware within the product portfolio. For details and other new supported transceivers, refer to the Transceiver Module Group (TMG) Compatibility Matrix.
|
Behavior Changes
-
Cisco Secure DDoS Edge Protection is supported from Cisco IOS XR Release 7.10.1 on Cisco NCS 540 series routers. But the smart licensing usage and utilization reporting for the edge protection feature remains disabled. Usage details of the edge protection functionality will be enabled only in the future release. Hence, the Smart Account In Use utilization report for edge protection will show as 0 (zero) consumed.
-
Prior to Cisco IOS XR Release 7.2.1, a segment of an explicit segment list can be configured as an IPv4 address (representing a Node or a Link) using the index indexaddress ipv4 address command.
Starting with Cisco IOS XR Release 7.2.1, an IPv4-based segment (representing a Node or a Link) can also be configured with the new index index mpls adjacencyaddress command. The configuration is stored in NVRAM in the same CLI format used to create it. There is no conversion from the old CLI to the new CLI.
Starting with Cisco IOS XR Release 7.9.1, the old CLI has been deprecated. Old configurations stored in NVRAM will be rejected at boot-up.
As a result, explicit segment lists with IPv4-based segments using the old CLI must be re-configured using the new CLI.
There are no CLI changes for segments configured as MPLS labels using the index index mpls label label command.
-
If you are on a release before Cisco IOS XR Release 7.4.1, you can configure SR-ODN with Flexible Algorithm constraints using the segment-routing traffic-eng on-demand color color dynamic sid-algorithm algorithm-number command.
Starting with Cisco IOS XR Release 7.4.1, you can also configure SR-ODN with Flexible Algorithm constraints using the new segment-routing traffic-eng on-demand color color constraints segments sid-algorithm algorithm-number command.
From Cisco IOS XR Release 7.9.1, the segment-routing traffic-eng on-demand color color dynamic sid-algorithm algorithm-number command is deprecated. Previous configurations stored in NVRAM will be rejected at boot-up.
Hence, for Cisco IOS XR Release 7.9.1, you must reconfigure all SR-ODN configurations with Flexible Algorithm constraints that use the on-demand dynamic sid-algorithm with the on-demand constraints command.
Restrictions and Limitations on the Cisco NCS 540 Series Router
-
Enabling or disabling frame preemption on the Time Sensitive Networking (TSN) port results in traffic drop for N540-FH-CSR-SYS. The port Twenty Five G0/0/12 is used as the TSN port.
-
Fabric multicast queue stats are not supported in N540X-8Z16G-SYS-A/D, N540X-6Z18G-SYS-A/D, N540-6Z14S-SYS-D, N540-6Z18G-SYS-A/D, and N540X-4Z14G2Q-A/D variants.
-
Unlabeled BGP PIC EDGE for global prefixes is not supported.
-
The interface ports 0/0/0/24 to 0/0/0/31 do not support 1G Copper SFPs on N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants. Also, these ports do not support Auto-Negotiation with 1GE optical SFPs and they cannot act as 1GE Synchronous Ethernet sources.
-
The interface ports 0/0/0/20 to 0/0/0/27 do not support 1G Copper SFPs on N540X-16Z4G8Q2C-A, N540X-16Z8Q2C-D, and N540X-16Z4G8Q2C-D variants. Also, these ports do not support Auto-Negotiation with 1GE optical SFPs and they cannot act as 1GE Synchronous Ethernet sources.
-
Remove the speed settings on the 1G Copper optics when 10M/100M is configured and replaced with 1G SFP optics.
-
The hw-module profile mfib statistics command is not supported.
Caveats
|
Bug ID |
Headline |
|---|---|
|
EVPN VPWS down post migrating from Multi-homing to Single-Homing |
|
|
Netflow IPv6: The record-ipv6 under monitor-map reports incorrect output and input interface with outbundlemember or outphysint options. |
IOS XR Base Images and Optional Packages
For more information on system setup and software installation process, see System Setup and Software Installation Guide for Cisco NCS 540 Series Routers.
For general and ordering information see:
-
Cisco Network Convergence System 540 Fronthaul Routers Data Sheet
-
Cisco Network Convergence System 540 Large Density Router Data Sheet
-
Cisco Network Convergence System 540 Medium Density Routers Data Sheet
-
Cisco Network Convergence System 540 Small Density Router Data Sheet
To install the Cisco NCS 540 Series Routers, see Cisco NCS 540 Router Hardware Installation Guide.
Release 7.10.1 Software
The following tables list the supported base images and optional packages and their corresponding file names.
-
The first table lists the supported software for N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants.
-
The second table lists the supported software for N540-24Q8L2DD-SYS, N540X-16Z4G8Q2C-A/D, N540-28Z4C-SYS-A/D, N540X-12Z16G-SYS-A/D, N540-12Z20G-SYS-A/D, N540-FH-CSR-SYS, N540X-16Z8Q2C-D and N540-FH-AGG-SYS variants.
-
The third table lists the supported software for N540X-4Z14G2Q-A/D, N540X-8Z16G-SYS-A/D, N540-6Z14S-SYS-D, N540-6Z18G-SYS-A/D, and N540X-6Z18G-SYS-A/D variants.
Visit the Cisco Software Download page to download the Cisco IOS XR software images.
|
Base Image |
Filename |
Description |
|
IOS XR Base Image |
ncs540-mini-x-7.10.1.iso |
IOS XR mandatory base image. |
|
USB Boot Package |
ncs540-usb_boot-7.10.1.zip |
Package required to perform USB Boot. Includes the same packages as the base image. |
|
Optional Packages not included in the base image |
||
|
Package |
Filename |
Description |
|
IOS XR Manageability |
ncs540-mgbl-1.0.0.0-r7101.x86_64.rpm |
Supports Extensible Markup Language (XML) Parser, Telemetry, Netconf, gRPC and HTTP server |
|
IOS XR MPLS |
ncs540-mpls-1.0.0.0-r7101.x86_64.rpm ncs540-mpls-te-rsvp-1.0.0.0-r7101.x86_64.rpm |
Supports MPLS and MPLS Traffic Engineering (MPLS-TE) |
|
IOS XR Security |
ncs540-k9sec-1.0.0.0-r7101.x86_64.rpm |
Supports MACsec and 802.1X |
|
IOS XR ISIS |
ncs540-isis-1.0.0.0-r7101.x86_64.rpm |
Supports ISIS |
|
IOS XR OSPF |
ncs540-ospf-1.0.0.0-r7101.x86_64.rpm |
Supports OSPF |
|
IOS XR Lawful Intercept |
ncs540-li-1.0.0.0-r7101.x86_64.rpm |
Supports Lawful Intercept (LI) |
|
IOS XR Multicast |
ncs540-mcast-1.0.0.0-r7101.x86_64.rpm |
Supports Multicast |
|
IOS XR EIGRP |
ncs540-eigrp-1.0.0.0-r7101.x86_64.rpm |
Supports EIGRP |
|
IOS XR LI-CTRL |
ncs540-lictrl-1.0.0.0-r7101.x86_64.rpm |
Supports LI-CTRL |
|
Base Image |
Filename |
Description |
|
IOS XR Base Image |
ncs540l-x64-7.10.1.iso |
IOS XR base image with mandatory packages. The base ISO image also includes the following optional packages:
These optional packages are also included in NCS540l-iosxr-7.10.1.tar. |
|
USB Boot Package |
ncs540l-usb_boot-7.10.1.zip |
Package required to perform USB Boot. Includes the same packages as the base image. |
|
Optional Packages not included in the base image |
||
|
Package |
Filename |
Description |
|
IOS XR Telnet (xr-telnet) |
NCS540l-iosxr-7.10.1.tar |
Supports Telnet |
|
IOS XR EIGRP (xr-eigrp) |
NCS540l-iosxr-7.10.1.tar |
Supports EIGRP |
|
IOS XR CDP (xr-cdp) |
NCS540l-iosxr-7.10.1.tar |
Supports CDP |
|
IOS XR k9sec (xr-k9sec) |
NCS540l-k9sec-rpms.7.10.1.tar |
Supports 802.1X |
|
IOS XR RIP (xr-rip) |
NCS540l-iosxr-7.10.1.tar |
Supports RIP |
|
Base Image |
Filename |
Description |
|
IOS XR Base Image |
ncs540l-aarch64-7.10.1.iso |
IOS XR base image with mandatory packages. The ISO image also includes the following optional packages:
These optional packages are also included in NCS540l aarch64 iosxr optional rpms-7.10.1.tar. |
|
USB Boot Package |
ncs540l-aarch64-usb_boot-7.10.1.zip |
Package required to perform USB Boot. Includes the same packages as the base image. |
|
Optional Packages not included in the base image |
||
|
Package |
Filename |
Description |
|
IOS XR Telnet (xr-telnet) |
NCS540l-aarch64-iosxr-optional-rpms-7.10.1.tar |
Supports Telnet |
|
IOS XR EIGRP (xr-eigrp) |
NCS540l-aarch64-iosxr-optional-rpms-7.10.1.tar |
Supports EIGRP |
|
IOS XR CDP (xr-cdp) |
NCS540l-aarch64-iosxr-optional-rpms-7.10.1.tar |
Supports CDP |
|
IOS XR k9sec (xr-k9sec) |
NCS540l-aarch64-k9sec-rpms.7.10.1.tar |
Supports 802.1X |
|
IOS XR RIP (xr-rip) |
NCS540l-aarch64-iosxr-optional-rpms-7.10.1.tar |
Supports RIP |
Determine Software Version
Log in to the router and enter the show version command on the N540-24Z8Q2C-SYS, N540-ACC-SYS, and N540X-ACC-SYS variants:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 7.10.1
Copyright (c) 2013-2023 by Cisco Systems, Inc.
Build Information:
Built By : deenayak
Built On : Wed Aug 16 21:43:50 PDT 2023
Built Host : iox-ucs-033
Workspace : /auto/srcarchive16/prod/7.10.1/ncs540/ws
Version : 7.10.1
Location : /opt/cisco/XR/packages/
Label : 7.10.1
cisco NCS-540 () processor
System uptime is 1 hour 12 minutes
Log in to the router and enter the show version command on the N540X-16Z4G8Q2C-A/D, N540-28Z4C-SYS-A/D, N540X-12Z16G-SYS-A/D, and N540-12Z20G-SYS-A/D variants:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 7.10.1 LNT
Copyright (c) 2013-2023 by Cisco Systems, Inc.
Build Information:
Built By : deenayak
Built On : Wed Aug 16 23:51:31 UTC 2023
Build Host : iox-ucs-035
Workspace : /auto/srcarchive16/prod/7.10.1/ncs540l/ws/
Version : 7.10.1
Label : 7.10.1
cisco NCS540L (C3708 @ 1.70GHz)
cisco N540-28Z4C-SYS-A (C3708 @ 1.70GHz) processor with 8GB of memory
ROUTER uptime is 1 hour, 33 minutes
Cisco NCS 540 Series Fixed Router 28x1/10G, 4x100G, AC Chassis
Log in to the router and enter the show version command on the N540X-4Z14G2Q-A/D, N540-6Z18G-SYS-A/D, N540X-8Z16G-SYS-A/D, N540-6Z14S-SYS-D, and N540X-6Z18G-SYS-A/D variants:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 7.10.1 LNT
Copyright (c) 2013-2023 by Cisco Systems, Inc.
Build Information:
Built By : deenayak
Built On : Wed Aug 16 23:51:31 UTC 2023
Build Host : iox-lnx-024
Workspace : /auto/srcarchive16/prod/7.10.1/ncs540l-aarch64/ws/
Version : 7.10.1
Label : 7.10.1
cisco NCS540L
cisco N540X-4Z14G2Q-A processor with 8GB of memory
Router uptime is 6 minutes
Cisco NCS 540 Series Fixed Router 12x1G, 4xCu, 2x10G, 2x25G, AC
Log in to the router and enter the show version command on the N540-24Q8L2DD-SYS variant:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 7.10.1 LNT
Copyright (c) 2013-2023 by Cisco Systems, Inc.
Build Information:
Built By : deenayak
Built On : Wed Aug 16 23:51:31 UTC 2023
Build Host : iox-ucs-035
Workspace : /auto/srcarchive16/prod/7.10.1/ncs540l/ws/
Version : 7.10.1
Label : 7.10.1
cisco NCS540L (D1519 @ 1.50GHz)
cisco N540-24Q8L2DD-SYS (D1519 @ 1.50GHz) processor with 16GB of memory
Router uptime is 1 hour, 37 minutes
Cisco NCS540 Series, Fixed Router 2x400G, 8x50G, 24x25G Chassis
Log in to the router and enter the show version command on the N540-FH-AGG-SYS variant:
RP/0/RP0/CPU0:Router#show version
Cisco IOS XR Software, Version 7.10.1 LNT
Copyright (c) 2013-2023 by Cisco Systems, Inc.
Build Information:
Built By : deenayak
Built On : Wed Aug 16 23:51:31 UTC 2023
Build Host : iox-ucs-035
Workspace : /auto/srcarchive16/prod/7.10.1/ncs540l/ws/
Version : 7.10.1
Label : 7.10.1
cisco NCS540L (C3708 @ 1.70GHz)
cisco N540-FH-AGG-SYS (C3708 @ 1.70GHz) processor with 8GB of memory
Router uptime is 1 hour, 2 minutes
Cisco NCS 540 FH System with 24xCPRI/25G/10G/TSN+4x100G
Determine Firmware Support
Use the show command in EXEC mode to view the hardware components with their current FPD version and status. The status of the hardware must be “CURRENT”; Running and Programed version must be the same. The Golden FPDs with “NEED UPGD” can be ignored, the Golden FPDs are not upgradable.
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-24Z8Q2C-SYS, N540X-ACC-SYS, and N540-ACC-SYS variants:
Note |
If the Req Reload field is mentioned as Yes in the output, then it indicates the need for a router reboot for the FPD's latest version to take effect. |
RP/0/RP0/CPU0:Router#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-24Z8Q2C-M Bootloader(A) YES 1.16 1.16 0.0
CPU-IOFPGA(A) YES 0.10 0.10 0.0
MB-IOFPGA(A) YES 0.27 0.27 0.0
MB-MIFPGA YES 0.05 0.05 0.0
SATA-INTEL_240G(A) NO 1132.00 1132.00 0.0
SATA-INTEL_480G(A) NO 1132.00 1132.00 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 75.00 75.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-M600-MU(A) NO 6.00 6.00 0.0
SATA-Micron(A) NO 1.00 1.00 0.0
SATA-SMART-128G(A) NO 1427.00 1427.00 0.0
SSFP_E1F_0 NO 13.01 13.01 0.0
SSFP_E1F_1 NO 13.01 13.01 0.0
SSFP_E1F_10 NO 13.01 13.01 0.0
SSFP_E1F_11 NO 13.01 13.01 0.0
SSFP_E1F_12 NO 13.01 13.01 0.0
SSFP_E1F_13 NO 13.01 13.01 0.0
SSFP_E1F_14 NO 13.01 13.01 0.0
SSFP_E1F_15 NO 13.01 13.01 0.0
SSFP_E1F_16 NO 13.01 13.01 0.0
SSFP_E1F_17 NO 13.01 13.01 0.0
SSFP_E1F_18 NO 13.01 13.01 0.0
SSFP_E1F_19 NO 13.01 13.01 0.0
SSFP_E1F_2 NO 13.01 13.01 0.0
SSFP_E1F_20 NO 13.01 13.01 0.0
SSFP_E1F_21 NO 13.01 13.01 0.0
SSFP_E1F_22 NO 13.01 13.01 0.0
SSFP_E1F_23 NO 13.01 13.01 0.0
SSFP_E1F_24 NO 13.01 13.01 0.0
SSFP_E1F_25 NO 13.01 13.01 0.0
SSFP_E1F_26 NO 13.01 13.01 0.0
SSFP_E1F_27 NO 13.01 13.01 0.0
SSFP_E1F_28 NO 13.01 13.01 0.0
SSFP_E1F_29 NO 13.01 13.01 0.0
SSFP_E1F_3 NO 13.01 13.01 0.0
SSFP_E1F_30 NO 13.01 13.01 0.0
SSFP_E1F_31 NO 13.01 13.01 0.0
SSFP_E1F_32 NO 13.01 13.01 0.0
SSFP_E1F_33 NO 13.01 13.01 0.0
SSFP_E1F_34 NO 13.01 13.01 0.0
SSFP_E1F_35 NO 13.01 13.01 0.0
SSFP_E1F_36 NO 13.01 13.01 0.0
SSFP_E1F_37 NO 13.01 13.01 0.0
SSFP_E1F_38 NO 13.01 13.01 0.0
SSFP_E1F_39 NO 13.01 13.01 0.0
SSFP_E1F_4 NO 13.01 13.01 0.0
SSFP_E1F_40 NO 13.01 13.01 0.0
SSFP_E1F_41 NO 13.01 13.01 0.0
SSFP_E1F_42 NO 13.01 13.01 0.0
SSFP_E1F_43 NO 13.01 13.01 0.0
SSFP_E1F_44 NO 13.01 13.01 0.0
SSFP_E1F_45 NO 13.01 13.01 0.0
SSFP_E1F_46 NO 13.01 13.01 0.0
SSFP_E1F_47 NO 13.01 13.01 0.0
SSFP_E1F_5 NO 13.01 13.01 0.0
SSFP_E1F_6 NO 13.01 13.01 0.0
SSFP_E1F_7 NO 13.01 13.01 0.0
SSFP_E1F_8 NO 13.01 13.01 0.0
SSFP_E1F_9 NO 13.01 13.01 0.0
SSFP_OC3_STM1_0 NO 12.01 12.01 0.0
SSFP_OC3_STM1_1 NO 12.01 12.01 0.0
SSFP_OC3_STM1_10 NO 12.01 12.01 0.0
SSFP_OC3_STM1_11 NO 12.01 12.01 0.0
SSFP_OC3_STM1_12 NO 12.01 12.01 0.0
SSFP_OC3_STM1_13 NO 12.01 12.01 0.0
SSFP_OC3_STM1_14 NO 12.01 12.01 0.0
SSFP_OC3_STM1_15 NO 12.01 12.01 0.0
SSFP_OC3_STM1_16 NO 12.01 12.01 0.0
SSFP_OC3_STM1_17 NO 12.01 12.01 0.0
SSFP_OC3_STM1_18 NO 12.01 12.01 0.0
SSFP_OC3_STM1_19 NO 12.01 12.01 0.0
SSFP_OC3_STM1_2 NO 12.01 12.01 0.0
SSFP_OC3_STM1_20 NO 12.01 12.01 0.0
SSFP_OC3_STM1_21 NO 12.01 12.01 0.0
SSFP_OC3_STM1_22 NO 12.01 12.01 0.0
SSFP_OC3_STM1_23 NO 12.01 12.01 0.0
SSFP_OC3_STM1_24 NO 12.01 12.01 0.0
SSFP_OC3_STM1_25 NO 12.01 12.01 0.0
SSFP_OC3_STM1_26 NO 12.01 12.01 0.0
SSFP_OC3_STM1_27 NO 12.01 12.01 0.0
SSFP_OC3_STM1_28 NO 12.01 12.01 0.0
SSFP_OC3_STM1_29 NO 12.01 12.01 0.0
SSFP_OC3_STM1_3 NO 12.01 12.01 0.0
SSFP_OC3_STM1_30 NO 12.01 12.01 0.0
SSFP_OC3_STM1_31 NO 12.01 12.01 0.0
SSFP_OC3_STM1_32 NO 12.01 12.01 0.0
SSFP_OC3_STM1_33 NO 12.01 12.01 0.0
SSFP_OC3_STM1_34 NO 12.01 12.01 0.0
SSFP_OC3_STM1_35 NO 12.01 12.01 0.0
SSFP_OC3_STM1_36 NO 12.01 12.01 0.0
SSFP_OC3_STM1_37 NO 12.01 12.01 0.0
SSFP_OC3_STM1_38 NO 12.01 12.01 0.0
SSFP_OC3_STM1_39 NO 12.01 12.01 0.0
SSFP_OC3_STM1_4 NO 12.01 12.01 0.0
SSFP_OC3_STM1_40 NO 12.01 12.01 0.0
SSFP_OC3_STM1_41 NO 12.01 12.01 0.0
SSFP_OC3_STM1_42 NO 12.01 12.01 0.0
SSFP_OC3_STM1_43 NO 12.01 12.01 0.0
SSFP_OC3_STM1_44 NO 12.01 12.01 0.0
SSFP_OC3_STM1_45 NO 12.01 12.01 0.0
SSFP_OC3_STM1_46 NO 12.01 12.01 0.0
SSFP_OC3_STM1_47 NO 12.01 12.01 0.0
SSFP_OC3_STM1_5 NO 12.01 12.01 0.0
SSFP_OC3_STM1_6 NO 12.01 12.01 0.0
SSFP_OC3_STM1_7 NO 12.01 12.01 0.0
SSFP_OC3_STM1_8 NO 12.01 12.01 0.0
SSFP_OC3_STM1_9 NO 12.01 12.01 0.0
SSFP_STM1_TSOP_0 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_1 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_10 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_11 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_12 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_13 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_14 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_15 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_16 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_17 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_18 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_19 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_2 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_20 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_21 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_22 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_23 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_24 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_25 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_26 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_27 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_28 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_29 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_3 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_30 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_31 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_32 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_33 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_34 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_35 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_36 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_37 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_38 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_39 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_4 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_40 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_41 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_42 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_43 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_44 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_45 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_46 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_47 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_5 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_6 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_7 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_8 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_9 NO 13.00 13.00 0.0
--------------------------------------------------------------------------------
N540-ACC-SYS Bootloader(A) YES 1.16 1.16 0.0
CPU-IOFPGA(A) YES 0.10 0.10 0.0
MB-IOFPGA(A) YES 0.27 0.27 0.0
MB-MIFPGA YES 0.05 0.05 0.0
SATA-INTEL_240G(A) NO 1132.00 1132.00 0.0
SATA-INTEL_480G(A) NO 1132.00 1132.00 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 75.00 75.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-M600-MU(A) NO 6.00 6.00 0.0
SATA-Micron(A) NO 1.00 1.00 0.0
SATA-SMART-128G(A) NO 1427.00 1427.00 0.0
SSFP_E1F_0 NO 13.01 13.01 0.0
SSFP_E1F_1 NO 13.01 13.01 0.0
SSFP_E1F_10 NO 13.01 13.01 0.0
SSFP_E1F_11 NO 13.01 13.01 0.0
SSFP_E1F_12 NO 13.01 13.01 0.0
SSFP_E1F_13 NO 13.01 13.01 0.0
SSFP_E1F_14 NO 13.01 13.01 0.0
SSFP_E1F_15 NO 13.01 13.01 0.0
SSFP_E1F_16 NO 13.01 13.01 0.0
SSFP_E1F_17 NO 13.01 13.01 0.0
SSFP_E1F_18 NO 13.01 13.01 0.0
SSFP_E1F_19 NO 13.01 13.01 0.0
SSFP_E1F_2 NO 13.01 13.01 0.0
SSFP_E1F_20 NO 13.01 13.01 0.0
SSFP_E1F_21 NO 13.01 13.01 0.0
SSFP_E1F_22 NO 13.01 13.01 0.0
SSFP_E1F_23 NO 13.01 13.01 0.0
SSFP_E1F_24 NO 13.01 13.01 0.0
SSFP_E1F_25 NO 13.01 13.01 0.0
SSFP_E1F_26 NO 13.01 13.01 0.0
SSFP_E1F_27 NO 13.01 13.01 0.0
SSFP_E1F_28 NO 13.01 13.01 0.0
SSFP_E1F_29 NO 13.01 13.01 0.0
SSFP_E1F_3 NO 13.01 13.01 0.0
SSFP_E1F_30 NO 13.01 13.01 0.0
SSFP_E1F_31 NO 13.01 13.01 0.0
SSFP_E1F_32 NO 13.01 13.01 0.0
SSFP_E1F_33 NO 13.01 13.01 0.0
SSFP_E1F_34 NO 13.01 13.01 0.0
SSFP_E1F_35 NO 13.01 13.01 0.0
SSFP_E1F_36 NO 13.01 13.01 0.0
SSFP_E1F_37 NO 13.01 13.01 0.0
SSFP_E1F_38 NO 13.01 13.01 0.0
SSFP_E1F_39 NO 13.01 13.01 0.0
SSFP_E1F_4 NO 13.01 13.01 0.0
SSFP_E1F_40 NO 13.01 13.01 0.0
SSFP_E1F_41 NO 13.01 13.01 0.0
SSFP_E1F_42 NO 13.01 13.01 0.0
SSFP_E1F_43 NO 13.01 13.01 0.0
SSFP_E1F_44 NO 13.01 13.01 0.0
SSFP_E1F_45 NO 13.01 13.01 0.0
SSFP_E1F_46 NO 13.01 13.01 0.0
SSFP_E1F_47 NO 13.01 13.01 0.0
SSFP_E1F_5 NO 13.01 13.01 0.0
SSFP_E1F_6 NO 13.01 13.01 0.0
SSFP_E1F_7 NO 13.01 13.01 0.0
SSFP_E1F_8 NO 13.01 13.01 0.0
SSFP_E1F_9 NO 13.01 13.01 0.0
SSFP_OC3_STM1_0 NO 12.01 12.01 0.0
SSFP_OC3_STM1_1 NO 12.01 12.01 0.0
SSFP_OC3_STM1_10 NO 12.01 12.01 0.0
SSFP_OC3_STM1_11 NO 12.01 12.01 0.0
SSFP_OC3_STM1_12 NO 12.01 12.01 0.0
SSFP_OC3_STM1_13 NO 12.01 12.01 0.0
SSFP_OC3_STM1_14 NO 12.01 12.01 0.0
SSFP_OC3_STM1_15 NO 12.01 12.01 0.0
SSFP_OC3_STM1_16 NO 12.01 12.01 0.0
SSFP_OC3_STM1_17 NO 12.01 12.01 0.0
SSFP_OC3_STM1_18 NO 12.01 12.01 0.0
SSFP_OC3_STM1_19 NO 12.01 12.01 0.0
SSFP_OC3_STM1_2 NO 12.01 12.01 0.0
SSFP_OC3_STM1_20 NO 12.01 12.01 0.0
SSFP_OC3_STM1_21 NO 12.01 12.01 0.0
SSFP_OC3_STM1_22 NO 12.01 12.01 0.0
SSFP_OC3_STM1_23 NO 12.01 12.01 0.0
SSFP_OC3_STM1_24 NO 12.01 12.01 0.0
SSFP_OC3_STM1_25 NO 12.01 12.01 0.0
SSFP_OC3_STM1_26 NO 12.01 12.01 0.0
SSFP_OC3_STM1_27 NO 12.01 12.01 0.0
SSFP_OC3_STM1_28 NO 12.01 12.01 0.0
SSFP_OC3_STM1_29 NO 12.01 12.01 0.0
SSFP_OC3_STM1_3 NO 12.01 12.01 0.0
SSFP_OC3_STM1_30 NO 12.01 12.01 0.0
SSFP_OC3_STM1_31 NO 12.01 12.01 0.0
SSFP_OC3_STM1_32 NO 12.01 12.01 0.0
SSFP_OC3_STM1_33 NO 12.01 12.01 0.0
SSFP_OC3_STM1_34 NO 12.01 12.01 0.0
SSFP_OC3_STM1_35 NO 12.01 12.01 0.0
SSFP_OC3_STM1_36 NO 12.01 12.01 0.0
SSFP_OC3_STM1_37 NO 12.01 12.01 0.0
SSFP_OC3_STM1_38 NO 12.01 12.01 0.0
SSFP_OC3_STM1_39 NO 12.01 12.01 0.0
SSFP_OC3_STM1_4 NO 12.01 12.01 0.0
SSFP_OC3_STM1_40 NO 12.01 12.01 0.0
SSFP_OC3_STM1_41 NO 12.01 12.01 0.0
SSFP_OC3_STM1_42 NO 12.01 12.01 0.0
SSFP_OC3_STM1_43 NO 12.01 12.01 0.0
SSFP_OC3_STM1_44 NO 12.01 12.01 0.0
SSFP_OC3_STM1_45 NO 12.01 12.01 0.0
SSFP_OC3_STM1_46 NO 12.01 12.01 0.0
SSFP_OC3_STM1_47 NO 12.01 12.01 0.0
SSFP_OC3_STM1_5 NO 12.01 12.01 0.0
SSFP_OC3_STM1_6 NO 12.01 12.01 0.0
SSFP_OC3_STM1_7 NO 12.01 12.01 0.0
SSFP_OC3_STM1_8 NO 12.01 12.01 0.0
SSFP_OC3_STM1_9 NO 12.01 12.01 0.0
SSFP_STM1_TSOP_0 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_1 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_10 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_11 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_12 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_13 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_14 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_15 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_16 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_17 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_18 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_19 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_2 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_20 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_21 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_22 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_23 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_24 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_25 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_26 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_27 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_28 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_29 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_3 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_30 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_31 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_32 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_33 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_34 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_35 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_36 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_37 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_38 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_39 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_4 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_40 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_41 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_42 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_43 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_44 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_45 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_46 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_47 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_5 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_6 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_7 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_8 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_9 NO 13.00 13.00 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LIT-PriMCU-ACFW(A) NO 0.04 0.04 0.0
LIT-SecMCU-ACFW(A) NO 0.07 0.07 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LIT-PriMCU-DCFW(A) NO 0.04 0.04 0.0
LIT-SecMCU-DCFW(A) NO 0.06 0.06 0.0
SDG-PriMCU-DCFW(A) NO 1.03 1.03 0.0
SDG-SecMCU-DCFW(A) NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-X-24Z8Q2C-M Bootloader(A) YES 1.16 1.16 0.0
CPU-IOFPGA(A) YES 0.10 0.10 0.0
MB-IOFPGA(A) YES 0.27 0.27 0.0
MB-MIFPGA YES 0.05 0.05 0.0
SATA-INTEL_240G(A) NO 1132.00 1132.00 0.0
SATA-INTEL_480G(A) NO 1132.00 1132.00 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 75.00 75.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-M600-MU(A) NO 6.00 6.00 0.0
SATA-Micron(A) NO 1.00 1.00 0.0
SATA-SMART-128G(A) NO 1427.00 1427.00 0.0
SSFP_E1F_0 NO 13.01 13.01 0.0
SSFP_E1F_1 NO 13.01 13.01 0.0
SSFP_E1F_10 NO 13.01 13.01 0.0
SSFP_E1F_11 NO 13.01 13.01 0.0
SSFP_E1F_12 NO 13.01 13.01 0.0
SSFP_E1F_13 NO 13.01 13.01 0.0
SSFP_E1F_14 NO 13.01 13.01 0.0
SSFP_E1F_15 NO 13.01 13.01 0.0
SSFP_E1F_16 NO 13.01 13.01 0.0
SSFP_E1F_17 NO 13.01 13.01 0.0
SSFP_E1F_18 NO 13.01 13.01 0.0
SSFP_E1F_19 NO 13.01 13.01 0.0
SSFP_E1F_2 NO 13.01 13.01 0.0
SSFP_E1F_20 NO 13.01 13.01 0.0
SSFP_E1F_21 NO 13.01 13.01 0.0
SSFP_E1F_22 NO 13.01 13.01 0.0
SSFP_E1F_23 NO 13.01 13.01 0.0
SSFP_E1F_24 NO 13.01 13.01 0.0
SSFP_E1F_25 NO 13.01 13.01 0.0
SSFP_E1F_26 NO 13.01 13.01 0.0
SSFP_E1F_27 NO 13.01 13.01 0.0
SSFP_E1F_28 NO 13.01 13.01 0.0
SSFP_E1F_29 NO 13.01 13.01 0.0
SSFP_E1F_3 NO 13.01 13.01 0.0
SSFP_E1F_30 NO 13.01 13.01 0.0
SSFP_E1F_31 NO 13.01 13.01 0.0
SSFP_E1F_32 NO 13.01 13.01 0.0
SSFP_E1F_33 NO 13.01 13.01 0.0
SSFP_E1F_34 NO 13.01 13.01 0.0
SSFP_E1F_35 NO 13.01 13.01 0.0
SSFP_E1F_36 NO 13.01 13.01 0.0
SSFP_E1F_37 NO 13.01 13.01 0.0
SSFP_E1F_38 NO 13.01 13.01 0.0
SSFP_E1F_39 NO 13.01 13.01 0.0
SSFP_E1F_4 NO 13.01 13.01 0.0
SSFP_E1F_40 NO 13.01 13.01 0.0
SSFP_E1F_41 NO 13.01 13.01 0.0
SSFP_E1F_42 NO 13.01 13.01 0.0
SSFP_E1F_43 NO 13.01 13.01 0.0
SSFP_E1F_44 NO 13.01 13.01 0.0
SSFP_E1F_45 NO 13.01 13.01 0.0
SSFP_E1F_46 NO 13.01 13.01 0.0
SSFP_E1F_47 NO 13.01 13.01 0.0
SSFP_E1F_5 NO 13.01 13.01 0.0
SSFP_E1F_6 NO 13.01 13.01 0.0
SSFP_E1F_7 NO 13.01 13.01 0.0
SSFP_E1F_8 NO 13.01 13.01 0.0
SSFP_E1F_9 NO 13.01 13.01 0.0
SSFP_OC3_STM1_0 NO 12.01 12.01 0.0
SSFP_OC3_STM1_1 NO 12.01 12.01 0.0
SSFP_OC3_STM1_10 NO 12.01 12.01 0.0
SSFP_OC3_STM1_11 NO 12.01 12.01 0.0
SSFP_OC3_STM1_12 NO 12.01 12.01 0.0
SSFP_OC3_STM1_13 NO 12.01 12.01 0.0
SSFP_OC3_STM1_14 NO 12.01 12.01 0.0
SSFP_OC3_STM1_15 NO 12.01 12.01 0.0
SSFP_OC3_STM1_16 NO 12.01 12.01 0.0
SSFP_OC3_STM1_17 NO 12.01 12.01 0.0
SSFP_OC3_STM1_18 NO 12.01 12.01 0.0
SSFP_OC3_STM1_19 NO 12.01 12.01 0.0
SSFP_OC3_STM1_2 NO 12.01 12.01 0.0
SSFP_OC3_STM1_20 NO 12.01 12.01 0.0
SSFP_OC3_STM1_21 NO 12.01 12.01 0.0
SSFP_OC3_STM1_22 NO 12.01 12.01 0.0
SSFP_OC3_STM1_23 NO 12.01 12.01 0.0
SSFP_OC3_STM1_24 NO 12.01 12.01 0.0
SSFP_OC3_STM1_25 NO 12.01 12.01 0.0
SSFP_OC3_STM1_26 NO 12.01 12.01 0.0
SSFP_OC3_STM1_27 NO 12.01 12.01 0.0
SSFP_OC3_STM1_28 NO 12.01 12.01 0.0
SSFP_OC3_STM1_29 NO 12.01 12.01 0.0
SSFP_OC3_STM1_3 NO 12.01 12.01 0.0
SSFP_OC3_STM1_30 NO 12.01 12.01 0.0
SSFP_OC3_STM1_31 NO 12.01 12.01 0.0
SSFP_OC3_STM1_32 NO 12.01 12.01 0.0
SSFP_OC3_STM1_33 NO 12.01 12.01 0.0
SSFP_OC3_STM1_34 NO 12.01 12.01 0.0
SSFP_OC3_STM1_35 NO 12.01 12.01 0.0
SSFP_OC3_STM1_36 NO 12.01 12.01 0.0
SSFP_OC3_STM1_37 NO 12.01 12.01 0.0
SSFP_OC3_STM1_38 NO 12.01 12.01 0.0
SSFP_OC3_STM1_39 NO 12.01 12.01 0.0
SSFP_OC3_STM1_4 NO 12.01 12.01 0.0
SSFP_OC3_STM1_40 NO 12.01 12.01 0.0
SSFP_OC3_STM1_41 NO 12.01 12.01 0.0
SSFP_OC3_STM1_42 NO 12.01 12.01 0.0
SSFP_OC3_STM1_43 NO 12.01 12.01 0.0
SSFP_OC3_STM1_44 NO 12.01 12.01 0.0
SSFP_OC3_STM1_45 NO 12.01 12.01 0.0
SSFP_OC3_STM1_46 NO 12.01 12.01 0.0
SSFP_OC3_STM1_47 NO 12.01 12.01 0.0
SSFP_OC3_STM1_5 NO 12.01 12.01 0.0
SSFP_OC3_STM1_6 NO 12.01 12.01 0.0
SSFP_OC3_STM1_7 NO 12.01 12.01 0.0
SSFP_OC3_STM1_8 NO 12.01 12.01 0.0
SSFP_OC3_STM1_9 NO 12.01 12.01 0.0
SSFP_STM1_TSOP_0 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_1 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_10 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_11 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_12 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_13 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_14 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_15 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_16 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_17 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_18 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_19 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_2 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_20 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_21 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_22 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_23 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_24 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_25 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_26 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_27 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_28 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_29 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_3 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_30 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_31 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_32 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_33 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_34 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_35 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_36 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_37 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_38 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_39 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_4 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_40 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_41 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_42 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_43 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_44 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_45 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_46 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_47 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_5 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_6 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_7 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_8 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_9 NO 13.00 13.00 0.0
--------------------------------------------------------------------------------
N540X-ACC-SYS Bootloader(A) YES 1.16 1.16 0.0
CPU-IOFPGA(A) YES 0.10 0.10 0.0
MB-IOFPGA(A) YES 0.27 0.27 0.0
MB-MIFPGA YES 0.05 0.05 0.0
SATA-INTEL_240G(A) NO 1132.00 1132.00 0.0
SATA-INTEL_480G(A) NO 1132.00 1132.00 0.0
SATA-M500IT-MC(A) NO 3.00 3.00 0.0
SATA-M500IT-MU-A(A) NO 5.00 5.00 0.0
SATA-M500IT-MU-B(A) NO 4.00 4.00 0.0
SATA-M5100(A) NO 75.00 75.00 0.0
SATA-M600-MCT(A) NO 5.00 5.00 0.0
SATA-M600-MU(A) NO 6.00 6.00 0.0
SATA-Micron(A) NO 1.00 1.00 0.0
SATA-SMART-128G(A) NO 1427.00 1427.00 0.0
SSFP_E1F_0 NO 13.01 13.01 0.0
SSFP_E1F_1 NO 13.01 13.01 0.0
SSFP_E1F_10 NO 13.01 13.01 0.0
SSFP_E1F_11 NO 13.01 13.01 0.0
SSFP_E1F_12 NO 13.01 13.01 0.0
SSFP_E1F_13 NO 13.01 13.01 0.0
SSFP_E1F_14 NO 13.01 13.01 0.0
SSFP_E1F_15 NO 13.01 13.01 0.0
SSFP_E1F_16 NO 13.01 13.01 0.0
SSFP_E1F_17 NO 13.01 13.01 0.0
SSFP_E1F_18 NO 13.01 13.01 0.0
SSFP_E1F_19 NO 13.01 13.01 0.0
SSFP_E1F_2 NO 13.01 13.01 0.0
SSFP_E1F_20 NO 13.01 13.01 0.0
SSFP_E1F_21 NO 13.01 13.01 0.0
SSFP_E1F_22 NO 13.01 13.01 0.0
SSFP_E1F_23 NO 13.01 13.01 0.0
SSFP_E1F_24 NO 13.01 13.01 0.0
SSFP_E1F_25 NO 13.01 13.01 0.0
SSFP_E1F_26 NO 13.01 13.01 0.0
SSFP_E1F_27 NO 13.01 13.01 0.0
SSFP_E1F_28 NO 13.01 13.01 0.0
SSFP_E1F_29 NO 13.01 13.01 0.0
SSFP_E1F_3 NO 13.01 13.01 0.0
SSFP_E1F_30 NO 13.01 13.01 0.0
SSFP_E1F_31 NO 13.01 13.01 0.0
SSFP_E1F_32 NO 13.01 13.01 0.0
SSFP_E1F_33 NO 13.01 13.01 0.0
SSFP_E1F_34 NO 13.01 13.01 0.0
SSFP_E1F_35 NO 13.01 13.01 0.0
SSFP_E1F_36 NO 13.01 13.01 0.0
SSFP_E1F_37 NO 13.01 13.01 0.0
SSFP_E1F_38 NO 13.01 13.01 0.0
SSFP_E1F_39 NO 13.01 13.01 0.0
SSFP_E1F_4 NO 13.01 13.01 0.0
SSFP_E1F_40 NO 13.01 13.01 0.0
SSFP_E1F_41 NO 13.01 13.01 0.0
SSFP_E1F_42 NO 13.01 13.01 0.0
SSFP_E1F_43 NO 13.01 13.01 0.0
SSFP_E1F_44 NO 13.01 13.01 0.0
SSFP_E1F_45 NO 13.01 13.01 0.0
SSFP_E1F_46 NO 13.01 13.01 0.0
SSFP_E1F_47 NO 13.01 13.01 0.0
SSFP_E1F_5 NO 13.01 13.01 0.0
SSFP_E1F_6 NO 13.01 13.01 0.0
SSFP_E1F_7 NO 13.01 13.01 0.0
SSFP_E1F_8 NO 13.01 13.01 0.0
SSFP_E1F_9 NO 13.01 13.01 0.0
SSFP_OC3_STM1_0 NO 12.01 12.01 0.0
SSFP_OC3_STM1_1 NO 12.01 12.01 0.0
SSFP_OC3_STM1_10 NO 12.01 12.01 0.0
SSFP_OC3_STM1_11 NO 12.01 12.01 0.0
SSFP_OC3_STM1_12 NO 12.01 12.01 0.0
SSFP_OC3_STM1_13 NO 12.01 12.01 0.0
SSFP_OC3_STM1_14 NO 12.01 12.01 0.0
SSFP_OC3_STM1_15 NO 12.01 12.01 0.0
SSFP_OC3_STM1_16 NO 12.01 12.01 0.0
SSFP_OC3_STM1_17 NO 12.01 12.01 0.0
SSFP_OC3_STM1_18 NO 12.01 12.01 0.0
SSFP_OC3_STM1_19 NO 12.01 12.01 0.0
SSFP_OC3_STM1_2 NO 12.01 12.01 0.0
SSFP_OC3_STM1_20 NO 12.01 12.01 0.0
SSFP_OC3_STM1_21 NO 12.01 12.01 0.0
SSFP_OC3_STM1_22 NO 12.01 12.01 0.0
SSFP_OC3_STM1_23 NO 12.01 12.01 0.0
SSFP_OC3_STM1_24 NO 12.01 12.01 0.0
SSFP_OC3_STM1_25 NO 12.01 12.01 0.0
SSFP_OC3_STM1_26 NO 12.01 12.01 0.0
SSFP_OC3_STM1_27 NO 12.01 12.01 0.0
SSFP_OC3_STM1_28 NO 12.01 12.01 0.0
SSFP_OC3_STM1_29 NO 12.01 12.01 0.0
SSFP_OC3_STM1_3 NO 12.01 12.01 0.0
SSFP_OC3_STM1_30 NO 12.01 12.01 0.0
SSFP_OC3_STM1_31 NO 12.01 12.01 0.0
SSFP_OC3_STM1_32 NO 12.01 12.01 0.0
SSFP_OC3_STM1_33 NO 12.01 12.01 0.0
SSFP_OC3_STM1_34 NO 12.01 12.01 0.0
SSFP_OC3_STM1_35 NO 12.01 12.01 0.0
SSFP_OC3_STM1_36 NO 12.01 12.01 0.0
SSFP_OC3_STM1_37 NO 12.01 12.01 0.0
SSFP_OC3_STM1_38 NO 12.01 12.01 0.0
SSFP_OC3_STM1_39 NO 12.01 12.01 0.0
SSFP_OC3_STM1_4 NO 12.01 12.01 0.0
SSFP_OC3_STM1_40 NO 12.01 12.01 0.0
SSFP_OC3_STM1_41 NO 12.01 12.01 0.0
SSFP_OC3_STM1_42 NO 12.01 12.01 0.0
SSFP_OC3_STM1_43 NO 12.01 12.01 0.0
SSFP_OC3_STM1_44 NO 12.01 12.01 0.0
SSFP_OC3_STM1_45 NO 12.01 12.01 0.0
SSFP_OC3_STM1_46 NO 12.01 12.01 0.0
SSFP_OC3_STM1_47 NO 12.01 12.01 0.0
SSFP_OC3_STM1_5 NO 12.01 12.01 0.0
SSFP_OC3_STM1_6 NO 12.01 12.01 0.0
SSFP_OC3_STM1_7 NO 12.01 12.01 0.0
SSFP_OC3_STM1_8 NO 12.01 12.01 0.0
SSFP_OC3_STM1_9 NO 12.01 12.01 0.0
SSFP_STM1_TSOP_0 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_1 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_10 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_11 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_12 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_13 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_14 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_15 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_16 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_17 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_18 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_19 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_2 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_20 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_21 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_22 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_23 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_24 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_25 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_26 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_27 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_28 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_29 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_3 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_30 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_31 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_32 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_33 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_34 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_35 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_36 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_37 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_38 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_39 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_4 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_40 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_41 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_42 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_43 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_44 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_45 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_46 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_47 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_5 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_6 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_7 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_8 NO 13.00 13.00 0.0
SSFP_STM1_TSOP_9 NO 13.00 13.00 0.0
RP/0/RP0/CPU0:Router#show hw-module fpd
Auto-upgrade:Enabled
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd
-----------------------------------------------------------------------------------------
0/RP0 N540-24Z8Q2C-M 1.0 MB-MIFPGA CURRENT 0.07 0.07
0/RP0 N540-24Z8Q2C-M 1.0 Bootloader CURRENT 1.16 1.16
0/RP0 N540-24Z8Q2C-M 1.0 CPU-IOFPGA CURRENT 0.10 0.10
0/RP0 N540-24Z8Q2C-M 1.0 MB-IOFPGA CURRENT 0.27 0.27
0/RP0 N540-24Z8Q2C-M 1.0 SATA-M500IT-MU-B CURRENT 4.00 4.00
0/PM0 N540-PWR400-A 1.0 SDG-PriMCU-ACFW CURRENT 0.00 0.00
0/PM0 N540-PWR400-A 1.0 SDG-SecMCU-ACFW CURRENT 0.00 0.00
0/PM1 N540-PWR400-A 1.0 SDG-PriMCU-ACFW CURRENT 0.00 0.00
0/PM1 N540-PWR400-A 1.0 SDG-SecMCU-ACFW CURRENT 0.00 0.00
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-28Z4C-SYS-A/D, N540-12Z20G-SYS-A/D, N540X-12Z16G-SYS-A/D, N540X-16Z8Q2C-D, and N540X-16Z4G8Q2C-A/D variants:
RP/0/RP0/CPU0:Router#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-12Z20G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-12Z20G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-24Q8L2DD-SYS ADM-DBConfig NO 2.05 2.05 0.0
ADM-MBConfig NO 2.05 2.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.12 2.12 0.0
Primary-BIOS YES 4.07 4.07 0.0
SsdSAMSA64G3 YES 12.41 12.41 0.0
StdbyFpga YES 2.59 2.59 0.0
StdbyFpgaGolden YES 2.56 2.39 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-FH-AGG-SYS ADM1_Config NO 1.02 1.02 1.0
ADM2_Config NO 1.02 1.02 1.0
DpFpgaCpri YES 0.24 0.24 0.0
DpFpgaEth YES 1.22 1.22 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-FH-CSR-SYS ADM1_Config NO 0.09 0.09 0.0
ADM1_Config NO 1.01 1.01 2.0
ADM2_Config NO 0.09 0.09 0.0
ADM2_Config NO 1.01 1.01 2.0
DpFpga YES 0.23 0.23 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-A EM-PrimMCU NO 1.02 1.02 0.0
EM-SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-D EM-PrimMCU NO 1.03 1.03 0.0
EM-SecMCU NO 3.01 3.01 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-A ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-D ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
RP/0/RP0/CPU0:Router#show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 ADM_FW CURRENT 14.03 14.03 NOT REQ
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 ADMConfig CURRENT 1.05 1.05 NOT REQ
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 IoFpga CURRENT 3.08 3.08 0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 IoFpgaGolden B CURRENT 2.07 0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 Primary-BIOS SA CURRENT 1.48 1.48 0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 StdbyFpga S CURRENT 0.40 0.40 0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 StdbyFpgaGolden BS CURRENT 0.40 0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 TamFw S CURRENT 4.11 4.11 0/RP0
0/RP0/CPU0 N540-28Z4C-SYS-A 4.0 TamFwGolden BS CURRENT 4.11 0/RP0
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540X-4Z14G2Q-A/D, N540-6Z18G-SYS-A/D, N540X-6Z18G-SYS-A/D, N540-6Z14S-SYS-D, and N540X-8Z16G-SYS-A/D variants:
RP/0/RP0/CPU0:Router#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-6Z14S-SYS-D ADMConfig NO 5.03 5.03 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-6Z18G-SYS-A ADMConfig NO 5.03 5.03 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.05 0.05 0.0
IoFpgaGolden YES 0.03 0.03 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-6Z18G-SYS-D ADMConfig NO 5.03 5.03 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.05 0.05 0.0
IoFpgaGolden YES 0.03 0.03 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-4Z14G2Q-A ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-4Z14G2Q-D ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-6Z18G-SYS-A ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-6Z18G-SYS-D ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-8Z16G-SYS-A ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540X-8Z16G-SYS-D ADMConfig NO 5.00 5.00 0.0
BckUp-BootLoader YES 20.08 20.08 0.0
IoFpga YES 0.17 0.17 0.0
IoFpgaGolden YES 0.15 0.15 0.0
Prim-BootLoader YES 20.08 20.08 0.0
StdbyFpga YES 2.05 2.05 0.0
StdbyFpgaGolden YES 0.33 0.33 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
RP/0/RP0/CPU0:Router#show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540X-8Z16G-SYS-A 1.0 ADMConfig CURRENT 5.00 5.00 NOT REQ
0/RP0/CPU0 N540X-8Z16G-SYS-A 1.0 IoFpga CURRENT 0.17 0.17 0/RP0
0/RP0/CPU0 N540X-8Z16G-SYS-A 1.0 IoFpgaGolden B CURRENT 0.15 0/RP0
0/RP0/CPU0 N540X-8Z16G-SYS-A 1.0 Prim-BootLoader A CURRENT 20.08 20.08 0/RP0
0/RP0/CPU0 N540X-8Z16G-SYS-A 1.0 StdbyFpga S CURRENT 2.05 2.05 0/RP0
0/RP0/CPU0 N540X-8Z16G-SYS-A 1.0 StdbyFpgaGolden BS CURRENT 0.33 0/RP0
0/RP0/CPU0 N540X-8Z16G-SYS-A 1.0 TamFw S CURRENT 6.05 6.05 0/RP0
0/RP0/CPU0 N540X-8Z16G-SYS-A 1.0 TamFwGolden BS CURRENT 6.05 0/RP0
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-24Q8L2DD-SYS variant:
RP/0/RP0/CPU0:Router#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-12Z20G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-12Z20G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-24Q8L2DD-SYS ADM-DBConfig NO 2.05 2.05 0.0
ADM-MBConfig NO 2.05 2.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.12 2.12 0.0
Primary-BIOS YES 4.07 4.07 0.0
SsdSAMSA64G3 YES 12.41 12.41 0.0
StdbyFpga YES 2.59 2.59 0.0
StdbyFpgaGolden YES 2.56 2.39 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-FH-AGG-SYS ADM1_Config NO 1.02 1.02 1.0
ADM2_Config NO 1.02 1.02 1.0
DpFpgaCpri YES 0.24 0.24 0.0
DpFpgaEth YES 1.22 1.22 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-FH-CSR-SYS ADM1_Config NO 0.09 0.09 0.0
ADM1_Config NO 1.01 1.01 2.0
ADM2_Config NO 0.09 0.09 0.0
ADM2_Config NO 1.01 1.01 2.0
DpFpga YES 0.23 0.23 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-A EM-PrimMCU NO 1.02 1.02 0.0
EM-SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-D EM-PrimMCU NO 1.03 1.03 0.0
EM-SecMCU NO 3.01 3.01 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-A ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-D ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
RP/0/RP0/CPU0:Router#show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 ADM-DBConfig CURRENT 2.05 2.05 NOT REQ
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 ADM-MBConfig CURRENT 2.05 2.05 NOT REQ
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 IoFpga CURRENT 2.12 2.12 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 IoFpgaGolden B CURRENT 2.12 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 Primary-BIOS S CURRENT 4.07 4.07 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 SsdSAMSA64G3 S CURRENT 12.41 12.41 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 StdbyFpga S CURRENT 2.59 2.59 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 StdbyFpgaGolden BS CURRENT 2.59 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 TamFw S CURRENT 6.05 6.05 0/RP0
0/RP0/CPU0 N540-24Q8L2DD-SYS 4.0 TamFwGolden BS CURRENT 6.05 0/RP0
0/PM0 N540-PWR400-A 0.0 PrimMCU CURRENT 1.02 1.02 NOT REQ
0/PM0 N540-PWR400-A 0.0 SecMCU CURRENT 1.03 1.03 NOT REQ
0/PM1 N540-PWR400-A 0.0 PrimMCU CURRENT 1.02 1.02 NOT REQ
0/PM1 N540-PWR400-A 0.0 SecMCU CURRENT 1.03 1.03 NOT REQ
Log in to the router and enter the show fpd package and show hw-module fpd commands on the Cisco N540-FH-AGG-SYS variant:
RP/0/RP0/CPU0:Router#show fpd package
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
N540-12Z20G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-12Z20G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-24Q8L2DD-SYS ADM-DBConfig NO 2.05 2.05 0.0
ADM-MBConfig NO 2.05 2.05 0.0
IoFpga YES 2.12 2.12 0.0
IoFpgaGolden YES 2.12 2.12 0.0
Primary-BIOS YES 4.07 4.07 0.0
SsdSAMSA64G3 YES 12.41 12.41 0.0
StdbyFpga YES 2.59 2.59 0.0
StdbyFpgaGolden YES 2.56 2.39 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-28Z4C-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540-FH-AGG-SYS ADM1_Config NO 1.02 1.02 1.0
ADM2_Config NO 1.02 1.02 1.0
DpFpgaCpri YES 0.24 0.24 0.0
DpFpgaEth YES 1.22 1.22 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-FH-CSR-SYS ADM1_Config NO 0.09 0.09 0.0
ADM1_Config NO 1.01 1.01 2.0
ADM2_Config NO 0.09 0.09 0.0
ADM2_Config NO 1.01 1.01 2.0
DpFpga YES 0.23 0.23 0.0
IoFpga YES 1.30 1.30 0.0
IoFpgaGolden YES 1.30 1.30 0.0
Primary-BIOS YES 1.46 1.46 0.0
StdbyFpga YES 0.46 0.46 0.0
StdbyFpgaGolden YES 0.46 0.46 0.0
TamFw YES 6.05 6.05 0.0
TamFwGolden YES 6.05 6.05 0.0
--------------------------------------------------------------------------------
N540-PWR400-A LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR400-D LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-A EM-PrimMCU NO 1.02 1.02 0.0
EM-SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
N540-PWR750-D EM-PrimMCU NO 1.03 1.03 0.0
EM-SecMCU NO 3.01 3.01 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-12Z16G-SYS-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-A ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z4G8Q2C-D ADM_FW YES 14.03 14.03 0.0
ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-A ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
--------------------------------------------------------------------------------
N540X-16Z8Q2C-D ADMConfig NO 1.05 1.05 0.0
IoFpga YES 3.08 3.08 0.0
IoFpgaGolden YES 2.07 2.03 0.0
Primary-BIOS YES 1.48 1.48 0.0
StdbyFpga YES 0.40 0.40 0.0
StdbyFpgaGolden YES 0.40 0.40 0.0
TamFw YES 4.11 4.11 0.0
TamFwGolden YES 4.11 4.11 0.0
RP/0/RP0/CPU0:Router#show hw-module fpd
Auto-upgrade:Enabled
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Versions
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-------------------------------------------------------------------------------------------------
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 ADM1_Config CURRENT 1.02 1.02 NOT REQ
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 ADM2_Config CURRENT 1.02 1.02 NOT REQ
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 DpFpgaCpri CURRENT 0.24 0.24
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 DpFpgaEth CURRENT 1.22 1.22 0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 IoFpga CURRENT 1.30 1.30 0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 IoFPgaGolden B CURRENT 1.30 0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 Primary-BIOS SA CURRENT 1.46 1.46 0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 StdbyFpga S CURRENT 0.46 0.46 0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 StdbyFpgaGolden BS CURRENT 0.46 0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 TamFw S CURRENT 6.05 6.05 0/RP0
0/RP0/CPU0 N540-FH-AGG-SYS 1.0 TamFwGolden BS CURRENT 6.05 0/RP0
0/PM1 N540-PWR750-A 0.0 PrimMCU CURRENT 1.02 1.02 NOT REQ
0/PM1 N540-PWR750-A 0.0 SecMCU CURRENT 1.03 1.03 NOT REQ
Important Notes
Supported Transceiver Modules
For more information on the supported transceiver modules, see Transceiver Module Group (TMG) Compatibility Matrix. In the Begin your Search search box, enter the keyword NCS540 and click Enter.
Upgrading Cisco IOS XR Software
Note |
For software installation and upgrades, refer to the respective upgrade/downgrade docs .tar files based on your 540 router variant. |
Cisco IOS XR Software is installed and activated from modular packages, allowing specific features or software patches to be installed, upgraded, or downgraded without affecting unrelated processes.
The upgrade document for N540-24Z8Q2C-SYS, N540X-ACC-SYS, and N540-ACC-SYS variants is available along with the software image in NCS540-docs-7.10.1.tar file.
The upgrade document for N540-28Z4C-SYS-A/D, N540-12Z20G-SYS-A/D, N540X-12Z16G-SYS-A/D, N540X-16Z4G8Q2C-A/D, N540-24Q8L2DD-SYS, N540-FH-AGG-SYS, N540X-16Z8Q2C-D, and N540-FH-CSR-SYS variants are available along with the software image in NCS540l-docs-7.10.1.tar file.
The upgrade document for N540X-4Z14G2Q-A/D, N540X-8Z16G-SYS-A/D, N540-6Z14S-SYS-D, N540-6Z18G-SYS-A/D, and N540X-6Z18G-SYS-A/D variants are available along with the software image in NCS540l-aarch64-docs-7.10.1.tar file.
Note |
Quad configurations will be lost when you perform a software downgrade on Cisco NCS 540 Routers that support quad configurations from IOS XR Release 7.5.1 onwards to a release before IOS XR Release 7.5.1 due to a non-backward compatibility change. The lost configuration can be applied manually after the downgrade. |
Production Software Maintenance Updates (SMUs)
A production SMU is a SMU that is formally requested, developed, tested, and released. Production SMUs are intended for use in a live network environment and are formally supported by the Cisco TAC and the relevant development teams. Software bugs identified through software recommendations or Bug Search Tools are not a basis for production SMU requests.
For information on production SMU types, refer the Production SMU Types section of the IOS XR Software Maintenance Updates (SMUs) guide.
Cisco IOS XR Error messages
To view, search, compare, and download Cisco IOS XR Error Messages, refer to the Cisco IOS XR Error messages tool.
Cisco IOS XR MIBs
To determine the MIBs supported by platform and release, refer to the Cisco IOS XR MIBs tool.
Related Documentation
The most current Cisco NCS 540 router documentation is located at the following URL:
https://www.cisco.com/c/en/us/td/docs/iosxr/ncs-540-series-routers.html
Feedback