Routing Configuration Guide for Cisco NCS 5500 Series Routers, IOS XR Release 7.10.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: August 1, 2023

Chapter: New and Changed Feature Information

New and Changed Feature Information
Routing Features Added or Modified in IOS XR Release 7.10.x

New and Changed Feature Information

This table summarizes the new and changed feature information for the Routing Configuration Guide for Cisco NCS 5500 Series Routers, and tells you where they are documented.

Routing Features Added or Modified in IOS XR Release 7.10.x

Table 1. New and Changed Features
Feature	Description	Changed in Release	Where Documented
Multihop BFD on IPv4 and IPv6 Non-Default VRFs	This feature was introduced.	Release 7.10.1	Multihop BFD on IPv4 and IPv6 Non-Default VRFs
Autonomous System Boundary Router Isolation and Adjacency Control for LSA Overflows	This feature was introduced.	Release 7.10.1	Autonomous System Boundary Router Isolation and Adjacency Control for LSA Overflows
Disable IID-TLV of IS-IS Protocol Instance	This feature was introduced.	Release 7.10.1	Disable IID-TLV of IS-IS Protocol Instance

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)