show tech-support custom
To automatically run a customised list of show commands, use the show tech-support custom command in EXEC mode.
show tech-support custom { profile-name profile name }
Syntax Description
profile-nameprofile name |
Displays a profile that has a customised list of show commands and System Admin show commands in it. When you execute the show tech-support custom profile-name command, the list of commands specified in it are also executed. |
Command Default
None
Command Modes
EXEC mode
Config mode
Command History
Release |
Modification |
---|---|
Release 7.5.1 |
This command was introduced. |
Usage Guidelines
This command generates tech-support information that is useful for Cisco Technical Support representatives when troubleshooting a router. By default, the output of this command is saved on the router's hard disk in a file with .tgz extension. You can share this file with Cisco Technical Support. To share, use the copy command to copy the .tgz file to a server or local machine. For example, copy harddisk:/showtech/ name.tgz tftp:// server_path .
For Cisco Technical Support contact information, see the 'Obtaining Documentation and Submitting a Service Request' section in the Preface.
Note |
This command is not required during normal use of the router. |
Task ID
Task ID |
Operations |
---|---|
basic-services or cisco-support |
read |
The following example shows the output of the show tech-support custom profile-name command:
++ Show tech start time: 2021-Oct-28.174339.UTC ++
Thu Oct 28 17:43:39 UTC 2021 Waiting for gathering to complete
........................................
Thu Oct 28 17:45:40 UTC 2021 Compressing show tech output
Show tech output available at 0/RP0/CPU0 : /harddisk:/showtech/showtech-custom-2021-Oct-28.174339.UTC.tgz
++ Show tech end time: 2021-Oct-28.174540.UTC ++