Skip to content
Skip to search
Skip to footer

Segment Routing Configuration Guide for Cisco 8000 Series Routers, IOS XR Release 7.9.x

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: March 31, 2023

Chapter: New and Changed Information for Segment Routing Features

New and Changed Information for Segment Routing Features
New and Changed Segment Routing Features

New and Changed Information for Segment Routing Features

This table summarizes the new and changed feature information for the Segment Routing Configuration Guide for Cisco 8000 Series Routers, and lists where they are documented.

New and Changed Segment Routing Features

Segment Routing Features Added or Modified in IOS XR Release 7.9.x


Feature	Description	Introduced/Changed in Release	Where Documented
SR-ODN: Layer 3 IPv6 BGP Services	This feature is introduced.	Release 7.9.1	Configuring SR-ODN: Layer-3 Services Examples
SRv6 Services: L3 EVPN	This feature is introduced.	Release 7.9.1	SRv6 Services: L3 EVPN
SRv6 Services: Services with Remote SIDs from W-LIB	This feature is introduced.	Release 7.9.1	SRv6 Services: L2 and L3 Services with Remote SIDs from W-LIB
L3 EVPN/SRv6 and L3VPN/MPLS Interworking Gateway	This feature is introduced.	Release 7.9.1	L3 EVPN/SRv6 and L3VPN/MPLS Interworking Gateway
L3 EVPN/SRv6 and L3 EVPN/MPLS Interworking Gateway	This feature is introduced.	Release 7.9.1	L3 EVPN/SRv6 and L3 EVPN/MPLS Interworking Gateway
SR-TE Explicit Segment Lists with Mix of IPv4 and IPv6 Segments	This feature is introduced.	Release 7.9.1	SR-TE Policy with Explicit Path
SR-TE Automated Steering Without BGP Prefix Path Label	This feature is introduced.	Release 7.9.1	SR-TE Automated Steering Without BGP Prefix Path Label
Increased Number of Labels on Topology-Independent Loop-Free Alternate Backup Paths	This feature is introduced.	Release 7.9.1	Behaviors and Limitations of TI-LFA

Was this Document Helpful?

Feedback

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)