Cisco 8010 Series Routers
What's New in Cisco IOS XR 25.1.1
Cisco 8010 Series Routers are based on the new Cisco A100 ASIC. Cisco Silicon One enables a single silicon architecture that spans a massive portion of the networking market. The router can be positioned as CSG (Cell Site Gateway) or pre-aggregation router
The Cisco 8010 Series Routers offer versatile ethernet interface options ranging from 1G, 25G to 100G that are capable of Class C timing. The router hardware is capable of IPSEC encryption for data and future software releases are planned to support IPSEC encryption. It’s powered by the industry-leading carrier-class version of Cisco IOS XR software.
This release introduces the 8011-4G24Y4H-I Large Density Router as part of the new Cisco 8010 Series Routers family. It’s a temperature-hardened, fixed port, 1 rack unit form-factor router. It supports the following network interfaces:
-
4 x 1G Copper ports
-
24 x 1/10/25G SFP28 ports
-
4 x 100G QSFP28 ports
The router supports the following Timing Interfaces Card (TIC):
-
Cisco 8010 Timing Interfaces Card (8000-TIC)
-
Cisco 8010 Timing Interfaces Card with GNSS (8000-TIC-GNSS)
The TIC is modular. By default, the router comes with 8000-TIC. As an option, you can choose the 8000-TIC-GNSS, while ordering the router.
For more information about the router features and benefits, see the Cisco 8010 Series Large Density Fixed Routers Datasheet.
Supported Software Features
The 8011-4G24Y4H-I Large Density Router supports many features provided by Cisco’s trustworthy IOS XR operating system. .
Following is an exclusive feature developed for the 8011-4G24Y4H-I Large Density Router in this release:
|
Feature |
Description |
|---|---|
|
Dying Gasp for Loss of Power via SNMP |
You can configure the SNMP agent to generate IPv4 and IPv6 SNMP traps when the router triggers a message to the Network Management System (NMS) that a node is going down. Such a message, known as a dying gasp event, is sent when a power failure occurs or the input power source is disconnected. Dying Gasp is supported for both AC and DC PSU. |
Cisco 8010 Series Routers Support the Following Technologies
Release 25.1.1 Packages
The Cisco IOS XR software is composed of a base image (ISO) that provides the XR infrastructure. The ISO image is made up of a set of packages (also called RPMs). These packages are of three types:
-
A mandatory package that is included in the ISO
-
An optional package that is included in the ISO
-
An optional package that is not included in the ISO
Visit the Cisco Software Download page to download the Cisco IOS XR software images.
To determine the Cisco IOS XR Software packages installed on your router, log in to the router and enter the show install active command:
RP/0/RP0/CPU0:TB8#show install active
Fri Mar 28 10:20:27.145 UTC
XR Software Hash: ef0af09bf2346e71384b87c8c23f15f1c2401011406fd9791bec5ccf305b3d23
Xr Package Version
---------------------------------------------------- ---------------------------
xr-8000-af-ea 25.1.1v1.0.0-1
xr-8000-aib 25.1.1v1.0.0-1
xr-8000-bfd 25.1.1v1.0.0-1
xr-8000-buffhdr-ea 25.1.1v1.0.0-1
xr-8000-bundles 25.1.1v1.0.0-1
xr-8000-card-support 25.1.1v1.0.0-1
xr-8000-cdp-ea 25.1.1v1.0.0-1
xr-8000-cem-driver 25.1.1v1.0.0-1
xr-8000-cfm 25.1.1v1.0.0-1
xr-8000-common-otn 25.1.1v1.0.0-1
xr-8000-core 25.1.1v1.0.0-1
xr-8000-cpa 25.1.1v1.0.0-1
xr-8000-cpa-devobj-gnss 25.1.1v1.0.0-1
xr-8000-cpa-devobj-misc 25.1.1v1.0.0-1
xr-8000-cpa-driver-fpgalib-kmod-oe 25.1.1v1.0.0-1
xr-8000-cpa-npu 25.1.1v1.0.0-1
xr-8000-cpa-sb-data 25.1.1v1.0.0-1
xr-8000-dot1x 25.1.1v1.0.0-1
xr-8000-dsm 25.1.1v1.0.0-1
xr-8000-dyinggasp-pd 25.1.1v1.0.0-1
xr-8000-edpl 25.1.1v1.0.0-1
xr-8000-encap-id 25.1.1v1.0.0-1
xr-8000-ether-ea 25.1.1v1.0.0-1
xr-8000-fabric 25.1.1v1.0.0-1
xr-8000-feat-mgr 25.1.1v1.0.0-1
xr-8000-fib-ea 25.1.1v1.0.0-1
xr-8000-forwarder 25.1.1v1.0.0-1
xr-8000-fpd 25.1.1v1.0.0-1
xr-8000-fwd-tools 25.1.1v1.0.0-1
xr-8000-fwdlib 25.1.1v1.0.0-1
xr-8000-gil-ea 25.1.1v1.0.0-1
xr-8000-host-core 25.1.1v1.0.0-1
xr-8000-hw-resmon 25.1.1v1.0.0-1
xr-8000-l2fib 25.1.1v1.0.0-1
xr-8000-l2mcast 25.1.1v1.0.0-1
xr-8000-leabaofa 25.1.1v1.0.0-1
xr-8000-libofaasync 25.1.1v1.0.0-1
xr-8000-lpts-ea 25.1.1v1.0.0-1
xr-8000-mcast 25.1.1v1.0.0-1
xr-8000-netflow 25.1.1v1.0.0-1
xr-8000-npu 25.1.1v1.0.0-1
xr-8000-oam 25.1.1v1.0.0-1
xr-8000-optics 25.1.1v1.0.0-1
xr-8000-os-oe 25.1.1v1.0.0-1
xr-8000-os-oe-extra 25.1.1v1.0.0-1
xr-8000-pbr 25.1.1v1.0.0-1
xr-8000-pd-port-mode 25.1.1v1.0.0-1
xr-8000-pfilter 25.1.1v1.0.0-1
xr-8000-pidb 25.1.1v1.0.0-1
xr-8000-pktio 25.1.1v1.0.0-1
xr-8000-ple-sdk 25.1.1v1.0.0-1
xr-8000-pm 25.1.1v1.0.0-1
xr-8000-port-mapper 25.1.1v1.0.0-1
xr-8000-ppinfo 25.1.1v1.0.0-1
xr-8000-pwhe-ea 25.1.1v1.0.0-1
xr-8000-qos-ea 25.1.1v1.0.0-1
xr-8000-ras 25.1.1v1.0.0-1
xr-8000-sat 25.1.1v1.0.0-1
xr-8000-span 25.1.1v1.0.0-1
xr-8000-spio 25.1.1v1.0.0-1
xr-8000-spp-ea 25.1.1v1.0.0-1
xr-8000-timing 25.1.1v1.0.0-1
xr-8000-tunnel-ip 25.1.1v1.0.0-1
xr-8000-utapp-blaze 25.1.1v1.0.0-1
xr-8000-vether 25.1.1v1.0.0-1
xr-8000-ztp-ea 25.1.1v1.0.0-1
xr-aaa 25.1.1v1.0.0-1
xr-acl 25.1.1v1.0.0-1
xr-apphosting 25.1.1v1.0.0-1
xr-appmgr 25.1.1v1.0.0-1
xr-bcdl 25.1.1v1.0.0-1
xr-bfd 25.1.1v1.0.0-1
xr-bgp 25.1.1v1.0.0-1
xr-bgputil 25.1.1v1.0.0-1
xr-bng-stubs 25.1.1v1.0.0-1
xr-bundles 25.1.1v1.0.0-1
xr-cal-pi 25.1.1v1.0.0-1
xr-cds 25.1.1v1.0.0-1
xr-cfgmgr 25.1.1v1.0.0-1
xr-cfm 25.1.1v1.0.0-1
xr-cofo 25.1.1v1.0.0-1
xr-core 25.1.1v1.0.0-1
xr-core-calv 25.1.1v1.0.0-1
xr-cpa-common 25.1.1v1.0.0-1
xr-cpa-common-optics 25.1.1v1.0.0-1
xr-cpa-common-psu 25.1.1v1.0.0-1
xr-cpa-driver-devobj-misc 25.1.1v1.0.0-1
xr-cpa-driver-devobj-npu 25.1.1v1.0.0-1
xr-cpa-driver-devobj-phy 25.1.1v1.0.0-1
xr-cpa-driver-devobj-sensors 25.1.1v1.0.0-1
xr-cpa-driver-devobj-storage 25.1.1v1.0.0-1
xr-cpa-driver-devobj-test 25.1.1v1.0.0-1
xr-cpa-driver-devobj-timing 25.1.1v1.0.0-1
xr-cpa-driver-fpgalib-access 25.1.1v1.0.0-1
xr-cpa-driver-fpgalib-common 25.1.1v1.0.0-1
xr-cpa-driver-fpgalib-infra 25.1.1v1.0.0-1
xr-cpa-driver-fpgalib-misc 25.1.1v1.0.0-1
xr-cpa-driver-fpgalib-optics 25.1.1v1.0.0-1
xr-cpa-driver-optics 25.1.1v1.0.0-1
xr-cpa-ethsw 25.1.1v1.0.0-1
xr-cpa-idprom 25.1.1v1.0.0-1
xr-cpa-tamlib 25.1.1v1.0.0-1
xr-ctc 25.1.1v1.0.0-1
xr-debug 25.1.1v1.0.0-1
xr-dhcp 25.1.1v1.0.0-1
xr-diags 25.1.1v1.0.0-1
xr-diskboot 25.1.1v1.0.0-1
xr-drivers 25.1.1v1.0.0-1
xr-edpl 25.1.1v1.0.0-1
xr-eem 25.1.1v1.0.0-1
xr-elmi-stubs 25.1.1v1.0.0-1
xr-ema 25.1.1v1.0.0-1
xr-enhancedmanageability 25.1.1v1.0.0-1
xr-erp 25.1.1v1.0.0-1
xr-featurecapability 25.1.1v1.0.0-1
xr-fib 25.1.1v1.0.0-1
xr-filesysinv 25.1.1v1.0.0-1
xr-foundation-8000 25.1.1v1.0.0-1
xr-fpd 25.1.1v1.0.0-1
xr-gil 25.1.1v1.0.0-1
xr-ha-infra 25.1.1v1.0.0-1
xr-host-core 25.1.1v1.0.0-1
xr-httpclient 25.1.1v1.0.0-1
xr-icpe-eth 25.1.1v1.0.0-1
xr-icpe-opt 25.1.1v1.0.0-1
xr-identifier 25.1.1v1.0.0-1
xr-infra-sla 25.1.1v1.0.0-1
xr-install 25.1.1v1.0.0-1
xr-ip-apps 25.1.1v1.0.0-1
xr-ip-core 25.1.1v1.0.0-1
xr-ip-infra-vrf 25.1.1v1.0.0-1
xr-ip-mibs 25.1.1v1.0.0-1
xr-ip-static 25.1.1v1.0.0-1
xr-ipc 25.1.1v1.0.0-1
xr-ipsla 25.1.1v1.0.0-1
xr-is-is 25.1.1v1.0.0-1
xr-l2snooptransport 25.1.1v1.0.0-1
xr-l2vpn 25.1.1v1.0.0-1
xr-ldp 25.1.1v1.0.0-1
xr-licensing 25.1.1v1.0.0-1
xr-link-oam 25.1.1v1.0.0-1
xr-linuxnetworking 25.1.1v1.0.0-1
xr-linuxsecurity 25.1.1v1.0.0-1
xr-lldp 25.1.1v1.0.0-1
xr-lpts 25.1.1v1.0.0-1
xr-manageabilityxml 25.1.1v1.0.0-1
xr-mandatory 25.1.1v1.0.0-1
xr-mcast 25.1.1v1.0.0-1
xr-mcastl2snoop 25.1.1v1.0.0-1
xr-mda 25.1.1v1.0.0-1
xr-minimalboot 25.1.1v1.0.0-1
xr-mpls 25.1.1v1.0.0-1
xr-mpls-oam 25.1.1v1.0.0-1
xr-mpls-oam-client 25.1.1v1.0.0-1
xr-mpls-static 25.1.1v1.0.0-1
xr-netflow 25.1.1v1.0.0-1
xr-netflow-minimal 25.1.1v1.0.0-1
xr-nosi 25.1.1v1.0.0-1
xr-ntp 25.1.1v1.0.0-1
xr-ofa 25.1.1v1.0.0-1
xr-optics 25.1.1v1.0.0-1
xr-orrspf 25.1.1v1.0.0-1
xr-os-oe-apps 25.1.1v1.0.0-1
xr-os-oe-core 25.1.1v1.0.0-1
xr-os-oe-docker 25.1.1v1.0.0-1
xr-os-oe-hardware 25.1.1v1.0.0-1
xr-ospf 25.1.1v1.0.0-1
xr-p4rt 25.1.1v1.0.0-1
xr-perf-meas 25.1.1v1.0.0-1
xr-perf-meas-client 25.1.1v1.0.0-1
xr-perfmgmt 25.1.1v1.0.0-1
xr-pfi 25.1.1v1.0.0-1
xr-pird-stubs 25.1.1v1.0.0-1
xr-pkt-trace 25.1.1v1.0.0-1
xr-pm-alarm 25.1.1v1.0.0-1
xr-portmode 25.1.1v1.0.0-1
xr-procmgr 25.1.1v1.0.0-1
xr-python 25.1.1v1.0.0-1
xr-qos 25.1.1v1.0.0-1
xr-rid-mgr 25.1.1v1.0.0-1
xr-routing 25.1.1v1.0.0-1
xr-rpl 25.1.1v1.0.0-1
xr-rsvp-te 25.1.1v1.0.0-1
xr-sanitizer-tools 25.1.1v1.0.0-1
xr-security 25.1.1v1.0.0-1
xr-security-tams 25.1.1v1.0.0-1
xr-secy-driver 25.1.1v1.0.0-1
xr-servicelayer 25.1.1v1.0.0-1
xr-snmp 25.1.1v1.0.0-1
xr-snmp-hw 25.1.1v1.0.0-1
xr-span 25.1.1v1.0.0-1
xr-spi-core 25.1.1v1.0.0-1
xr-spi-hw 25.1.1v1.0.0-1
xr-spp 25.1.1v1.0.0-1
xr-sr 25.1.1v1.0.0-1
xr-stats 25.1.1v1.0.0-1
xr-stp 25.1.1v1.0.0-1
xr-stubs 25.1.1v1.0.0-1
xr-sysdb 25.1.1v1.0.0-1
xr-syslog 25.1.1v1.0.0-1
xr-telemetry 25.1.1v1.0.0-1
xr-timing 25.1.1v1.0.0-1
xr-tmpdir-cleanup 25.1.1v1.0.0-1
xr-track 25.1.1v1.0.0-1
xr-transports 25.1.1v1.0.0-1
xr-tty 25.1.1v1.0.0-1
xr-tunnel-ip 25.1.1v1.0.0-1
xr-tunnel-nve 25.1.1v1.0.0-1
xr-udld 25.1.1v1.0.0-1
xr-upgradematrix 25.1.1v1.0.0-1
xr-utils 25.1.1v1.0.0-1
xr-vether 25.1.1v1.0.0-1
xr-vpnmib 25.1.1v1.0.0-1
xr-xmlinfra 25.1.1v1.0.0-1
xr-xrlibcurl 25.1.1v1.0.0-1
xr-ztp 25.1.1v1.0.0-1
To know about all the RPMs installed including XR, OS, and other components use the show install active all command.
The software modularity approach provides a flexible model that allows you to install a subset of IOS XR packages on devices based on your individual requirements. All critical components are modularized as packages so that you can select the features that you want to run on your router.
 Note |
The above show command output displays mandatory packages that are installed on the router. To view the optional and bug fix RPM packages, first install the package and use the show install active summary command. |
To view the optional and bug fix RPM packages, enter the show install active summary command:
RP/0/RP0/CPU0:TB8#show install active summary
Fri Mar 28 10:21:05.098 UTC
Active Packages: XR: 216 All: 1341
Label: 25.1.1
XR Software Hash: ef0af09bf2346e71384b87c8c23f15f1c2401011406fd9791bec5ccf305b3d23
Optional Packages Version
---------------------------------------------------- ---------------------------
xr-8000-l2mcast 25.1.1v1.0.0-1
xr-8000-mcast 25.1.1v1.0.0-1
xr-8000-netflow 25.1.1v1.0.0-1
xr-bgp 25.1.1v1.0.0-1
xr-ipsla 25.1.1v1.0.0-1
xr-is-is 25.1.1v1.0.0-1
xr-lldp 25.1.1v1.0.0-1
xr-mcast 25.1.1v1.0.0-1
xr-mpls-oam 25.1.1v1.0.0-1
xr-netflow 25.1.1v1.0.0-1
xr-ospf 25.1.1v1.0.0-1
xr-perf-meas 25.1.1v1.0.0-1
xr-perfmgmt 25.1.1v1.0.0-1
xr-track 25.1.1v1.0.0-1
Caveats
|
Bug ID |
Headline |
|---|---|
|
Packets drops are observed after router reload or OIR with ANLT applied on 10G or 25G Cu interfaces. |
|
|
Default AN and AN mismatch scenario for Native Copper Ports (P28-P31) needs to be fixed. |
Determine Software Version
Log in to the router and enter the show version command:
RP/0/RP0/CPU0:TB8#show version
Fri Mar 28 10:19:42.907 UTC
Cisco IOS XR Software, Version 25.1.1 LNT
Copyright (c) 2013-2024 by Cisco Systems, Inc.
Build Information:
Built By : cisco
Built On : Mon Mar 24 19:58:08 UTC 2025
Build Host : iox-ucs-003
Workspace : /auto/srcarchive12/prod/25.1.1/8000-aarch64/ws/
Version : 25.1.1
Label : 25.1.1
cisco 8000 (CN9130H board )
cisco 8011-4G24Y4H-I (CN9130H board ) processor with 16GB of memory
TB8 uptime is 1 hour, 7 minutes
Cisco 8011 Series Fixed 1RU Router 4x100G, 24x1/10/25G, 4xCu
Determine Firmware Support
Log in to the router and enter show fpd package command:
RP/0/RP0/CPU0:TB8#show fpd package
Fri Mar 28 10:22:15.007 UTC
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
8011-4G24Y4H-I ADMConfig YES 4.01 4.01 0.0
ADMConfig YES 5.00 5.00 8.0
BckUp-BootLoader YES 52.02 52.02 0.0
IoFpga YES 0.84 0.84 0.0
IoFpgaGolden YES 0.70 0.70 0.0
Prim-BootLoader YES 52.13 52.13 0.0
StdbyFpga YES 1.23 1.23 0.0
StdbyFpgaGolden YES 1.23 1.23 0.0
TamFw YES 9.04 9.04 0.0
TamFwGolden YES 9.04 9.04 0.0
--------------------------------------------------------------------------------
PWR-400-AC LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
ME-PrimMCU NO 0.04 0.00 0.0
ME-SecMCU NO 0.04 0.00 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
PWR-400-DC LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
ME-PrimMCU NO 0.03 0.00 0.0
ME-SecMCU NO 0.04 0.00 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
RP/0/RP0/CPU0:Gl-RFC#show fpd package
Thu Mar 27 10:52:45.338 IST
=============================== ================================================
Field Programmable Device Package
================================================
Req SW Min Req Min Req
Card Type FPD Description Reload Ver SW Ver Board Ver
=================== ========================== ====== ======= ======== =========
--------------------------------------------------------------------------------
8011-4G24Y4H-I ADMConfig YES 4.01 4.01 0.0
ADMConfig YES 5.00 5.00 8.0
BckUp-BootLoader YES 52.02 52.02 0.0
IoFpga YES 0.84 0.84 0.0
IoFpgaGolden YES 0.70 0.70 0.0
Prim-BootLoader YES 52.13 52.13 0.0
StdbyFpga YES 1.23 1.23 0.0
StdbyFpgaGolden YES 1.23 1.23 0.0
TamFw YES 9.04 9.04 0.0
TamFwGolden YES 9.04 9.04 0.0
--------------------------------------------------------------------------------
PWR-400-AC LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
ME-PrimMCU NO 0.04 0.00 0.0
ME-SecMCU NO 0.04 0.00 0.0
PrimMCU NO 1.02 1.02 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
PWR-400-DC LI-PrimMCU NO 0.04 0.04 0.0
LI-SecMCU NO 0.06 0.06 0.0
ME-PrimMCU NO 0.03 0.00 0.0
ME-SecMCU NO 0.04 0.00 0.0
PrimMCU NO 1.03 1.03 0.0
SecMCU NO 1.03 1.03 0.0
--------------------------------------------------------------------------------
Log in to the router and enter show hw-module fpd command:
RP/0/RP0/CPU0:TB8#show hw-module fpd
Fri Mar 28 10:21:30.602 UTC
Auto-upgrade:Enabled,PM excluded
Attribute codes: B golden, P protect, S secure, A Anti Theft aware
FPD Version
==============
Location Card type HWver FPD device ATR Status Running Programd Reload Loc
-----------------------------------------------------------------------------------------
0/RP0/CPU0 8011-4G24Y4H-I 9.0 ADMConfig S CURRENT 5.00 5.00 0/RP0
0/RP0/CPU0 8011-4G24Y4H-I 9.0 IoFpga CURRENT 0.84 0.84 0/RP0
0/RP0/CPU0 8011-4G24Y4H-I 9.0 IoFpgaGolden B CURRENT 0.70 0/RP0
0/RP0/CPU0 8011-4G24Y4H-I 9.0 Prim-BootLoader S CURRENT 52.13 52.13 0/RP0
0/RP0/CPU0 8011-4G24Y4H-I 9.0 StdbyFpga S CURRENT 1.23 1.23 0/RP0
0/RP0/CPU0 8011-4G24Y4H-I 9.0 StdbyFpgaGolden BS CURRENT 1.23 0/RP0
0/RP0/CPU0 8011-4G24Y4H-I 9.0 TamFw S CURRENT 9.04 9.04 0/RP0
0/RP0/CPU0 8011-4G24Y4H-I 9.0 TamFwGolden BS CURRENT 9.04 0/RP0
0/PM1 PWR-400-AC 1.0 LI-PrimMCU S CURRENT 0.04 0.04 NOT REQ
0/PM1 PWR-400-AC 1.0 LI-SecMCU S CURRENT 0.07 0.07 NOT REQ
Compatibility Matrix for EPNM and Crosswork with Cisco IOS XR Software
The compatibility matrix lists the features that are supported for each platform.
|
Cisco IOS XR |
Crosswork |
EPNM |
|---|---|---|
|
Release 25.1.1 |
Important Notes
Supported Transceiver Modules
To determine the transceivers that Cisco hardware device supports, refer to the Transceiver Module Group (TMG) Compatibility Matrix tool.
Production Software Maintenance Updates (SMUs)
A production SMU is a SMU that is formally requested, developed, tested, and released. Production SMUs are intended for use in a live network environment and are formally supported by the Cisco TAC and the relevant development teams. Software bugs identified through software recommendations or Bug Search Tools are not a basis for production SMU requests.
For information on production SMU types, refer the Production SMU Types section of the IOS XR Software Maintenance Updates (SMUs) guide.
Cisco IOS XR Error messages
To view, search, compare, and download Cisco IOS XR Error Messages, refer to the Cisco IOS XR Error messages tool.
Cisco IOS XR MIBs
To determine the MIBs supported by platform and release, refer to the Cisco IOS XR MIBs tool.
Related Documentation
The most current Cisco router documentation is located at the following URL:
https://www.cisco.com/c/en/us/td/docs/iosxr/8000-series-routers.html
Feedback