- Overview of Dial Interfaces, Controllers, and Lines
- Configuring Asynchronous Lines and Interfaces
- Asynchronous Call Queueing by Role
- Configuring Asynchronous Serial Traffic Over UDP
- Configuring and Managing Integrated Modems
- 1- and 2-Port V.90 Modem WICs for Cisco 2600 and Cisco 3600 Series Multiservice Platforms
- Call Tracker show Commands Extensions
- Cisco NM-8AM-V2 and NM-16AM-V2 Analog Modem Network Modules with V.92
- MICA and NextPort Modem Tech-Support Command Additions
- PIAFS Wireless Data Protocol Version 2.1 for Cisco MICA Modems
- V.92 and V.44 Support for Digital Modems
- V.92 Modem on Hold for Cisco AS5300 and Cisco AS5800 Universal Access Servers
- V.92 Modem on Hold for Cisco AS5350, Cisco AS5400, and Cisco AS5850 Universal Gateways and Cisco AS5800 Universal Access Servers
- V.92 Quick Connect for Cisco AS5300 and Cisco AS5800 Universal Access Servers
- V.92 Quick Connect for Cisco AS5350, Cisco AS5400, and Cisco AS5850 Universal Gateways and Cisco AS5800 Universal Access Servers
- V.92 Reporting Using RADIUS Attribute v.92-info
- Configuring and Managing Cisco Access Servers and Dial Shelves
- Configuring and Managing External Modems
- Modem Signal and Line States
- Creating and Using Modem Chat Scripts
- Cisco Modem User Interface
- Modem Script and System Script Support in Large-Scale Dial-Out
- Leased and Switched BRI Interface for ETSI NET3
- ISDN BCAC and Round-Robin Channel Selection Enhancements
- Configuring Virtual Asynchronous Traffic over ISDN
- Configuring Modem Use over ISDN BRI
- Configuring X.25 on ISDN
- Configuring X.25 on ISDN Using AO/DI
- Configuring ISDN on Cisco 800 Series Routers
- Cisco IOS Software Feature Removal
- Configuring ISDN PRI
- Dialing Number Enhancement
- ISDN BCAC and Round-Robin Channel Selection Enhancements
- Configuring ISDN Special Signaling
- Configuring Network Side ISDN PRI Signaling, Trunking, and Switching
- Preparing to Configure DDR
- Configuring Legacy DDR Spokes
- Configuring Legacy DDR Hubs
- Configuring Peer-to-Peer DDR with Dialer Profiles
- Dialer Map VRF-Aware for an MPLS VPN
- Dialer Persistent
- PPPoE Client DDR Idle-Timer
- Redial Enhancements
- Rotating Through Dial Strings
- Configuring Dialer CEF
- CEF Support for Dialer Profiles on Cisco 7500 Routers
- Configuring Snapshot Routing
- Reliable Static Routing Backup Using Object Tracking
- Configuring Dial Backup for Serial Lines
- Configuring Dial Backup Using Dialer Watch
- Dialer Watch Connect Delay
- VRF Aware Dialer Watch
- Configuring Dial Backup with Dialer Profiles
- ISDN Backup in MPLS Core
- Configuring Cisco Easy IP ..
- Configuring Virtual Template Interfaces
- Multiclass Multilink PPP
- Configuring Asynchronous Callback
- Configuring PPP Callback
- Configuring ISDN Caller ID Callback
- Configuring BACP
- Configuring an IP Local Pools Holdback Timer
- Configuring per-User Configuration
- Configuring Resource Pool Management
- Configuring Wholesale Dial Performance Optimization
- Large-Scale Dial-Out
- Dial-Out DS0 Level Trunk Group
- L2TP Large-Scale Dial-Out
- L2TP Large-Scale Dial-Out per-User Attribute via AAA
- Modem Script and System Script Support in Large-Scale Dial-Out
- Large-Scale Dial-Out (LSDO) VRF Aware
- Peer Pool Backup
- Dial Networking Business Applications
- Enterprise Dial Scenarios and Configurations
- Telco and ISP Typical Dial Scenarios and Configurations
- Modem Initialization Strings
- Feature Overview
- AppleTalk EIGRP
- Apollo Domain
- Banyan VINES
- Exterior Gateway Protocol
- HP Probe
- Interior Gateway Routing Protocol
- LAN Extension
- Netware Asychronous Services Interface Protocol
- Next Hop Resolution Protocol for IPX
- Novell Link-State Protocol
- Simple Multicast Routing Protocol for AppleTalk
- Xerox Network Systems
- Xremote
Cisco IOS Software Feature Removal
|
|
|
Features described in this feature module were removed in 12.2(13)T. |
|
Features described in this feature module were removed in 12.2(15)T. |
Feature Overview
The Cisco IOS Software Feature Removal feature is an engineering project to permanently remove selected legacy features (or components) from the Cisco IOS code. These features will not be available in future releases of Cisco IOS software.
The legacy features that have been removed as of Release 12.2(13)T are as follows:
- AppleTalk EIGRP
- Apollo Domain
- Banyan VINES
- Exterior Gateway Protocol
- HP Probe
- Interior Gateway Routing Protocol
- Next Hop Resolution Protocol for IPX
- Novell Link-State Protocol
- Simple Multicast Routing Protocol for AppleTalk
- Xerox Network Systems
The legacy features that have been removed as of Release 12.2(15)T are as follows:
This feature module lists the commands that have been removed from or modified in Cisco IOS software with the removal of a specified feature.
Note
Commands that have been modified may not all be listed in this document.
AppleTalk EIGRP
The following commands have been removed from or modified in Cisco IOS software with the removal of the AppleTalk EIGRP feature. Please note that not all commands that may have been modified are listed here:
Apollo Domain
The following commands have been removed from or modified in Cisco IOS software with the removal of the Apollo Domain feature:
Banyan VINES
The following commands have been removed from or modified in Cisco IOS software with the removal of the Banyan VINES feature:
- clear vines cache
- clear vines ipc
- clear vines neighbor
- clear vines route
- clear vines traffic
- debug frame-relay
- debug packet
- debug vines arp
- debug vines echo
- debug vines ipc
- debug vines netrpc
- debug vines packet
- debug vines routing
- debug vines service
- debug vines state
- debug vines table
- show vines access
- show vines cache
- show vines host
- show vines interface
- show vines ipc
- show vines neighbor
- show vines route
- show vines service
- show vines traffic
- trace (VINES)
- vines access-group
- vines access-list (extended)
- vines access-list (simple)
- vines access-list (standard)
- vines arp-enable
- vines decimal
- vines encapsulation
- vines enhancements
- vines host
- vines input-network-filter
- vines input-router-filter
- vines metric
- vines neighbor
- vines output-network-filter
- vines propagate
- vines redirect
- vines route
- vines route-cache
- vines routing
- vines serverless
- vines single-route
- vines split-horizon
- vines srtp-enabled
- vines time access-group
- vines time destination
- vines time participate
- vines time services
- vines time set-system
- vines time use-system
- vines update deltas
- vines update interval
Exterior Gateway Protocol
No commands were removed from or modified in Cisco IOS software with the removal of the EGP feature.
HP Probe
The following commands have been removed from or modified in Cisco IOS software with the removal of the HP Probe feature:
Interior Gateway Routing Protocol
The following commands have been removed from or modified in Cisco IOS software with the removal of the IGRP feature:
- debug clns igrp packets
- debug ip igrp events
- debug ip igrp transactions
- debug ip routing
- default-metric (IGRP)
- ip split-horizon (IGRP)
- metric holddown
- metric maximum-hops
- metric weights (IGRP)
- neighbor (IGRP)
- network (IGRP)
- offset-list (IGRP)
- router igrp
- set metric (IGRP)
- timers basic (IGRP)
- traffic-share balanced
LAN Extension
No commands were removed from or modified in Cisco IOS software with the removal of the LAN Extension feature.
Netware Asychronous Services Interface Protocol
The following commands have been removed from or modified in Cisco IOS software with the removal of the NASI protocol:
Next Hop Resolution Protocol for IPX
The following commands have been removed from or modified in Cisco IOS software with the removal of the NHRP for IPX feature:
- clear ipx nhrp
- debug nhrp
- debug nhrp extension
- debug nhrp options
- debug nhrp packet
- debug nhrp rate
- ipx nhrp authentication
- ipx nhrp holdtime
- ipx nhrp interest
- ipx nhrp map
- ipx nhrp max-send
- ipx nhrp network-id
- ipx nhrp nhs
- ipx nhrp record
- ipx nhrp responder
- ipx nhrp use
- show ipx nhrp
- show ipx nhrp traffic
Novell Link-State Protocol
The following commands have been removed from or modified in Cisco IOS software with the removal of the NLSP feature:
- access-list (NLSP)
- area-address (NLSP)
- clear ipx nlsp neighbors
- clear ipx route
- clear ipx traffic
- deny (NLSP)
- distribute-list in
- distribute-list out
- distribute-sap-list in
- distribute-sap-list out
- ipx access-list
- ipx advertise-default-route-only
- ipx flooding-unthrottled
- ipx internal-network
- ipx nlsp csnp-interval
- ipx nlsp enable
- ipx nlsp hello-interval
- ipx nlsp hello-multiplier
- ipx nlsp lsp-interval
- ipx nlsp metric
- ipx nlsp multicast
- ipx nlsp priority
- ipx nlsp retransmit-interval
- ipx nlsp rip
- ipx nlsp sap
- ipx ping-default
- ipx potential-pseudonode
- ipx route
- ipx router
- log-adjacency-changes
- multicast (NLSP)
- permit (NLSP)
- redistribute (IPX)
- route-aggregation
- show ipx nlsp database
- show ipx nlsp neighbors
- show ipx nlsp spf-log
- show ipx route
- show ipx traffic
Simple Multicast Routing Protocol for AppleTalk
The following commands have been removed from or modified in Cisco IOS software with the removal of the SMRP for AppleTalk feature:
- clear smrp mcache
- debug smrp all
- debug smrp group
- debug smrp mcache
- debug smrp neighbor
- debug smrp port
- debug smrp route
- debug smrp transaction
- show smrp forward
- show smrp globals
- show smrp group
- show smrp mcache
- show smrp neighbor
- show smrp port
- show smrp route
- show smrp traffic
- smrp mroute-cache protocol appletalk
- smrp protocol appletalk
- smrp routing
Xerox Network Systems
The following commands have been removed from or modified in Cisco IOS software with the removal of the XNS feature:
- access-list (XNS extended)
- access-list (XNS standard)
- debug xns packet
- debug xns routing
- show xns cache
- show xns interface
- show xns route
- show xns traffic
- xns access-group
- xns encapsulation
- xns flood broadcast allnets
- xns flood broadcast net-zero
- xns flood specific allnets
- xns forward-protocol
- xns hear-rip
- xns helper-address
- xns input-network-filter
- xns maximum-paths
- xns network
- xns output-network-filter
- xns route
- xns route-cache
- xns router-filter
- xns routing
- xns ub-emulation
- xns update-time
Xremote
The following commands have been removed from or modified in Cisco IOS software with the removal of the Xremote feature:
- show xremote
- show xremote line
- xremote
- xremote lat
- xremote tftp buffersize
- xremote tftp host
- xremote tftp retries
Feedback