--customer premises equipment. Terminating equipment, such as terminals, telephones, and modems, supplied by the service provider,
installed at customer sites, and connected to the network.
--digital subscriber line access multiplexer. A device that connects many digital subscriber lines to a network by multiplexing
the DSL traffic onto one or more network trunk lines.
--In Service Software Upgrade. ISSU is a process that allows Cisco IOS software to be updated or otherwise modified while
packet forwarding continues.
--On-Demand Address Pool. ODAPs enable pools of IP addresses to be dynamically increased or reduced in size depending on the
address utilization level. Once configured, the ODAP is populated with one or more subnets leased from a source server and
is ready to serve address requests from DHCP clients or from PPP sessions.
--Route Processor. A generic term for the centralized control unit in a chassis.
--Stateful Switchover. SSO refers to the implementation of Cisco IOS software that allows applications and features to maintain
a defined state between an active and standby RP. When a switching occurs, forwarding and sessions are maintained. SSO makes
an RP failure undetectable to the network.