New and Changed Information
This table summarizes the new and changed features for the Cisco Nexus 9000 Series NX-OS Layer 2 Switching Configuration Guide, Release 10.6(x) and where they are documented.
|
Feature |
Description |
Changed in Release |
Where Documented |
|---|---|---|---|
|
Static mac and Learn Disable are supported on Nexus N9336C-SE1 and 9396T12C-SE1 switches. |
Beginning with Cisco NX-OS Release 10.6(3)F, Static mac and Learn Disable Cisco Nexus N9336C-SE1 and 9396T12C-SE1 platform switches. |
10.6(3)F |
Guidelines and limitations for Cisco Nexus 9336C-SE1 switch Guidelines and limitations for Cisco Nexus 9396T12C-SE1 switch |
|
UDLD |
Beginning with Cisco NX-OS Release 10.6(3)F, UDLD is supported on Nexus 9300-SE1 switches. |
10.6(3)F |
Guidelines and limitations for the Cisco Nexus 93C64E-SG2-Q switch |
|
QinQ multi tag support on Nexus N9336C-SE1 and 9396T12C-SE1 |
Beginning with Cisco NX-OS Release 10.6(3)F, QinQ Multi Tag is supported on Nexus N9336C-SE1 and 9396T12C-SE1 switches. |
10.6(3)F |
Guidelines and limitations for the Cisco Nexus 93C64E-SG2-Q switch |
|
Support SVI Autostate on Nexus N9336C-SE1 and 9396T12C-SE1 |
Beginning with Cisco NX-OS Release 10.6(3)F,Support SVI Autostate on S1 platforms is supported on Nexus N9336C-SE1 and 9396T12C-SE1 switches. |
10.6(3)F |
Guidelines and limitations for the Cisco Nexus 93C64E-SG2-Q switch |
|
Support for Layer 2 switching features on Cisco N9336C-SE1 switch. |
Added support for Layer 2 switching features. |
10.6(1)F |
Feedback