New and Changed Information

This table summarizes the new and changed features for the Cisco Nexus 9000 Series NX-OS Interfaces Configuration Guide, Release 10.6(x) and where they are documented.

New and Changed Information

Table 1. New and Changed Features

Feature

Description

Changed in Release

Where Documented

Support for Q-in-Q VLAN tunnels on Cisco N9336C-SE1 switch. Added support for Q-in-Q VLAN tunnels.

10.6(1)F

Guidelines and limitations on Cisco Nexus N9336C-SE1 switch
Support for UDLD and port profiles features on Cisco N9336C-SE1 switch. Added support for UDLD and port profiles featuresfeatures.

10.6(1)F

Cisco Nexus 9336C-SE1 switch features

Support for Layer 2 features on Cisco N9336C-SE1 switch.

Added support for Layer 2 features.

10.6(1)F

Guidelines and limitations for Cisco N9336C-SE1 switch

Support for VPC on Cisco N9336C-SE1 switch.

Added support for VPC.

10.6(1)F

Guidelines and limitations

Support for port-channel on Cisco N9336C-SE1 switch.

Added support for port-channel.

10.6(1)F

Guidelines and Limitations

Support for Single Hop BFD on Cisco N9336C-SE1 switch.

Added support for single hop BFD

10.6(1)F

Guidelines and Limitations

Versatile diagnostic monitoring for optics

Added support for Versatile diagnostic monitoring(VDM)

10.6(1)F

Versatile diagnostics monitoring for optics

Support for Cisco SFP-10G-OLT20-X modules

Added support for Cisco SFP-10G-OLT20-X modules

10.6(1)F

Cisco SFP-10G-OLT20-X modules

Support for performance monitoring data for ZR/ZRP optics.

Performance monitoring data for ZR/ZRP optics is supported starting in Cisco NX-OS Release 10.6(1)F. Administrators can collect and review historical transceiver performance data for these optics. In addition, you can now use the clear counters interface transceiver performance-monitoring history command without specifying an interval to clear 30-second, 15-minute, and 24-hour bucket data in a single operation.

10.6(1)F

Guidelines and Limitations for 400G Digital Coherent Optics