New and Changed Information

New and Changed Information

This table summarizes the new and changed features for the Cisco Nexus 9000 Series NX-OS Quality of Service Configuration Guide, Release 10.5(x) and where they are documented.

Table 1. New and Changed Features

Feature

Description

Changed in Release

Where Documented

Policy-driven Dynamic Load Balancing

Added support for policy-driven Dynamic Load Balancing (DLB) in QoS.

10.5(3)F

Configure Policy-driven Dynamic Load Balancing

System QoS

Added support for QoS classification policies under system QoS on all ports.

10.5(3)F

Guidelines and Limitations for Classification

Queuing and scheduling support

Added support for Queuing and scheduling on Cisco Nexus 9364E-SG2-Q switches.

10.5(3)F

Guidelines and Limitations for Queuing and Scheduling

Priority flow control support

Added support for Priority flow control on the Cisco Nexus 9364E-SG2 switches.

10.5(3)F

Guidelines and Limitations for PFC on Cisco Nexus 9364E-SG2 Series Switch

ECN enhancement

Added support for Fast ECN marking to route all traffic through the fabric, which allows ECN marking at dequeue.

10.5(3)F

Guidelines and Limitations for Queuing and Scheduling

Interface QoS

Added support Interface QoS.

10.5(3)F

Guidelines and Limitations for Modular QoS CLI

Priority Flow Control (PFC) QOS support on 9800 switches

Added support to transport RDMA over Converged Ethernet (RoCE) v2 protocols on Cisco Nexus N9K-C9800 Series switches.

10.5(1)F

Guidelines and Limitations for Priority Flow Control

QoS FEX show commands

The show interface priority-flow-control commands are enhanced to display the PFC information for Cisco Nexus 9300-FX3 FEX Host Interfaces (HIF).

10.5(1)F

Guidelines and Limitations for Priority Flow Control