Skip to content
Skip to search
Skip to footer

Cisco Nexus 9000 Series NX-OS Quality of Service Configuration Guide, Release 10.1(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: June 18, 2024

Chapter: New and Changed Information

New and Changed Information
New and Changed Information

New and Changed Information

This chapter provides release-specific information for each new and changed feature in the Cisco Nexus 9000 Series NX-OS QoS Configuration Guide, Release 10.1(x).

New and Changed Information

Table 1. New and Changed Features for Cisco NX-OS Release 10.1(x)
Feature	Description	Changed in Release	Where Documented
Micro-Burst Monitoring Support	Micro-burst monitoring is now supported on Cisco Nexus 9336C-FX2-E switches.	10.1(2)	Configuring Micro-Burst Detection Per-Queue
Marking	Added support to Cisco NX-OS N9K-X9624D-R2 and N9K-C9508-FM-R2 platform switches.	10.1(2)	Guidelines and Limitations for Marking
Policing	Added support to Cisco NX-OS N9K-X9624D-R2 and N9K-C9508-FM-R2 platform switches.	10.1(2)	Guidelines and Limitations for Policing
Scheduling	Added support to Cisco NX-OS N9K-X9624D-R2 and N9K-C9508-FM-R2 platform switches.	10.1(2)	Guidelines and Limitations for Queuing and Scheduling
DSCP Wildcard Mask	Added support for creating an ACL that matches or filters traffic based on a DSCP bit mask in Cisco Nexus 9300 – EX/FX/FX2/FX3 Platform switches	10.1(1)	Configuring a DSCP Wildcard Mask
LLFC Watchdog Interval	LLFC watchdog interval is now supported on Cisco Nexus 9300-FX3 platform switches.	10.1(1)	Platform Support for QoS Features Configuring a Link Level Flow Control Watchdog and Priority Flow Control Watchdog
Micro-Burst Monitoring Support	Micro-burst monitoring is now supported on Cisco Nexus 9500 platform switches with N9K-X9700-FX line card.	10.1(1)	Configuring Micro-Burst Detection Per-Switch

Was this Document Helpful?

Feedback

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)