Cisco Nexus 9000 Series NX-OS Layer 2 Switching Configuration Guide, Release 10.1(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco Nexus 9000 Series NX-OS Layer 2 Switching Configuration Guide, Release 10.1(x)

Chapter Title

Index

Results

Updated:
September 12, 2023

Chapter: Index

Index

Contents

A - C - D - F - H - I - M - N - P - R - S - V

Index

A

abort 1 2 3
add 1

C

clear mac address-table dynamic address 1
clear spanning-tree counters 1
clear spanning-tree counters interface 1
clear spanning-tree detected-protocol 1 2
clear spanning-tree detected-protocol interface 1
clear vlan 1 2

D

diameter 1 2 3

F

feature private-vlan 1
feature vtp 1

H

hello 1
hello-time 1 2

I

instance 1 2
interface 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
interface vlan 1

M

mac address-table aging-time 1
mac address-table static 1
mac-address bpdu source version 2 1

N

name 1 2
no private-vlan 1
no vlan 1

P

primary root 1
private-vlan mapping 1

R

remove 1
revision 1 2

S

show interface 1
show interface counters storm-control 1 2
show interface ethernet counters storm-control 1
show interface port-channel counters storm-control 1
show interface port-channel counters storm-control multi-threshold 1
show interface port-channel counters storm-control multi-threshold broadcast 1
show interface port-channel counters storm-control multi-threshold multicast 1
show interface port-channel counters storm-control multi-threshold unicast 1
show interface private-vlan mapping 1
show interface switchport 1 2 3 4 5
show interface vlan 1 2
show mac address-table 1
show mac address-table aging-time 1
show mac address-table static 1
show running 1 2
show running-config interface 1
show running-config interface {ethernet | port-channel} 1 2
show running-config spanning-tree 1 2
show running-config spanning-tree all 1 2 3
show running-config vlan 1 2 3
show spanning-tree 1 2 3 4 5
show spanning-tree detail 1
show spanning-tree detail vlan 1
show spanning-tree interface 1 2 3 4 5 6
show spanning-tree mst 1 2 3 4 5 6 7 8 9 10 11 12
show spanning-tree mst configuration 1 2 3 4 5
show spanning-tree mst detail 1
show spanning-tree pathcost method 1
show spanning-tree summary 1 2 3 4 5 6 7
show spanning-tree vlan 1 2 3 4 5 6 7
show system vlan reserved 1
show vlan 1 2 3 4 5
show vlan counters 1 2
show vlan private-vlan 1 2 3
show vlan summary 1
show vtp counters 1
show vtp interface 1
show vtp password 1
show vtp status 1 2 3
show vtp trunk interface eth a/b 1
spanning-tree 1 2
spanning-tree bpdufilter disable 1
spanning-tree bpdufilter enable 1
spanning-tree bpduguard disable 1
spanning-tree bpduguard enable 1
spanning-tree guard 1
spanning-tree link-type 1 2 3
spanning-tree loopguard default 1
spanning-tree mode mst 1
spanning-tree mode rapid-pvst 1
spanning-tree mst 1 2 3 4 5
spanning-tree mst configuration 1 2 3 4 5
spanning-tree mst forward-time 1 2 3 4
spanning-tree mst hello-time 1 2 3 4
spanning-tree mst max-age 1 2 3 4
spanning-tree mst max-hops 1
spanning-tree mst pre-standard 1
spanning-tree mst priority 1
spanning-tree mst root primary 1
spanning-tree mst root secondary 1
spanning-tree mst simulate pvst 1
spanning-tree mst simulate pvst disable 1
spanning-tree pathcost method 1
spanning-tree port type 1
spanning-tree port type edge 1
spanning-tree port type edge bpdufilter default 1 2
spanning-tree port type edge bpduguard default 1
spanning-tree port type edge default 1
spanning-tree port type edge trunk 1
spanning-tree port type network 1
spanning-tree port type network default 1 2
spanning-tree port type normal 1 2
spanning-tree vlan 1 2 3 4 5 6 7 8
state active 1
state suspend 1
storm-control action trap 1 2
storm-control multi unicast 1
storm-control {broadcast | multicast | unicast} 1
storm-control-cpu arp rate 1
switching-mode store-forward 1 2
switchport 1 2
switchport mode private-vlan host 1
switchport mode private-vlan promiscuous 1
switchport mode private-vlan trunk allowed vlan 1
switchport mode private-vlan trunk promiscuous 1
switchport mode private-vlan trunk secondary 1
switchport mode trunk 1
switchport private-vlan trunk allowed 1
switchport private-vlan trunk allowed vlan 1
switchport private-vlan trunk native vlan 1 2
switchport vlan mapping 1
switchport vlan mapping enable 1
system private-vlan fex trunk 1
system vlan long-name 1

V

vlan 1 2 3 4 5 6 7 8
vlan configuration 1
vtp domain 1
vtp file 1
vtp password 1
vtp version 1

Was this Document Helpful?

FeedbackFeedback

Contact Cisco