Cisco APIC System Management Configuration Guide, Release 6.1(x)

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents

Find Matches in This Book

Results

Updated:: April 3, 2025

New and Changed Information

The table provides an overview of the significant changes to the organization and features in this guide up to the specified release. The table does not provide an exhaustive list of all changes made to the guide or of the new features up to that release.

Table 1. New Features and Changed Behavior in Cisco APIC Release 6.1(x)
Feature or Change	Description	Where Documented
Changes to Supported Hardware: N9K-9400-16W, for leaf or spine and PTP Telecom profile (G.8275.1) for new switches	N9K-X9400-16W is supported only on fabric links from ACI 6.1(3) release onward. PTP Telecom profile (G.8275.1) changes on specific switches working as leaf switches.	Supported Hardware for PTP Grandmaster Deployments PTP Limitations

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)