Cisco Catalyst Center Global Manager Upgrade Guide
Prerequisites for upgrading
You must complete the system updates before you can update any packages. Download and install package updates only after you install all system updates.
- You cannot upgrade the packages individually. You must complete every step described in this guide.
- Before you upgrade, ensure that the cluster link interface is connected to a switch port and is up.
Review this list of prerequisites before upgrading your installed instance of Catalyst Center Global Manager:
- You must have SUPER-ADMIN-ROLE permissions to perform this procedure. For more information, see Users and roles.
- Create a backup of your Catalyst Center Global Manager database. For more information, see About backup and restore.
-
If you have a firewall, allow Catalyst Center Global Manager to access these URLs on your cluster node for all system and package downloads:
- https://*.ciscoconnectdna.com/*
- *.cloudfront.net
- *.tesseractcloud.com
- To enable an air-gapped deployment on Catalyst Center Global Manager, see Enable an air-gapped deployment on Catalyst Center Global Manager.
-
While the Catalyst Center Global Manager GUI is compatible with these browsers that support HTTPS, we recommend that you use Chrome, not Firefox, during the upgrade:
- Google Chrome: Version 134 or later
- Mozilla Firefox: Version 120.0.1 or later
Supported upgrade paths
The supported upgrade paths for Catalyst Center Global Manager releases are listed in this table.
| If your release is… | You can upgrade to… |
|---|---|
|
1.4.1-3070267 |
1.6.1-3070141 |
|
1.5.1-3070200 |
1.6.1-3070141 |
Upgrade to Catalyst Center Global Manager 1.6.1
Before you begin
- Create a backup of your Catalyst Center Global Manager database.
- If your deployment uses a firewall, ensure Catalyst Center Global Manager can access this location on the cluster node to download system and package files: https://www.ciscoconnectdna.com:443.
Only users with the SUPER-ADMIN-ROLE can complete this procedure.
Step 1 | A pop-up window opens in the top-right corner, indicating that a new version of Catalyst Center Global Manager is available. Click the Go to Software Management link. If you don't see this pop-up window, click the menu icon and choose . |
Step 2 | In the Software Management page, click Upgrade to download and schedule the installation update. |
Step 3 | In the Upgrade Release dialog box, click Upgrade. |
Step 4 | In the Schedule Upgrade dialog box, specify when you want to start the upgrade, then click Download. You can track the upgrade progress from the Activities page. |
What's next
After the upgrade completes, log back in to the server. From the main menu, choose System > Software Management to verify the installed version and confirm that the upgrade completed successfully.
Upgrade to Catalyst Center Global Manager 1.6.1 in an air-gapped deployment
Before you begin
- Air-gapped mode is already enabled and healthy.
- You have a TAC-provided or TAC-approved upgrade package.
- A current Catalyst Center Global Manager backup has completed successfully.
- The virtual appliance or cluster is healthy, and NTP is configured and synchronized.
- No backup, cleanup, upgrade, or other maintenance operation is in progress.
-
You have sufficient
/data/airgapand system disk space for the upgrade package and upgrade operation. - You have recorded the existing allowed IP ranges so that you can verify them after the upgrade.
-
SSH access to the virtual appliance is available on port
2222.
| If your release is… | You can upgrade to… |
|---|---|
|
1.5.1-3070200 |
1.6.1-3070141 |
Use this procedure to perform an upgrade from Catalyst Center Global Manager release 1.5.1 to 1.6.1 in an air-gapped deployment.
Step 1 | Download the *.tar.gz file from the location specified by Cisco. |
Step 2 | Compare the calculated SHA-512 value with the value published by Cisco. Do not continue if the calculated checksum does not match the published value. Use these commands to calculate checksum:
|
Step 3 | Use this command to copy the *.tar.gz file to the /data/airgap folder on the virtual appliance:
|
Step 4 | Confirm that the *.tar.gz file was transferred successfully.
|
Step 5 | Log in to the Catalyst Center Global Manager GUI. |
Step 6 | From the main menu, choose . |
Step 7 | Click Scan to check for new versions. This process can take up to 30 minutes to complete. |
Step 8 | After the system locates the files required to complete the upgrade, choose one of these options:
Review the prechecks and resolve all critical errors before proceeding. |
Step 9 | Monitor the upgrade until the completion status is success. Do not reboot the virtual appliance, remove the package, or start another maintenance operation while the upgrade is in progress. |
Postdeployment checks
Postdeployment checks are critical after deploying or upgrading Catalyst Center Global Manager in virtual air gap mode. Perform these checks after a deployment or an upgrade:
- Verify that the virtual appliance or cluster is healthy and Catalyst Center Global Manager applications and services are operational.
- The configured allowed IP ranges are retained, and required DNS, NTP, and private network connectivity is available.
- Traffic to non-approved external ranges remains blocked.
- After an upgrade, verify that the installed Catalyst Center Global Manager version is correct and ensure that virtual air gap remains enabled. You can view results of the latest Catalyst Center Global Manager upgrade and its applications under . Under the Post-check tab, see whether the post-upgrade checks Catalyst Center Global Manager makes completed successfully. If a problem occurs for a particular check, click its information (i) icon in the Issues column for a description of the problem.