- Preface
- Using the WAAS Command-Line Interface
- Cisco WAAS Software Command Summary
- CLI Commands
- EXEC Mode Commands
- Global Configuration Mode Commands
- Interface Configuration Mode Commands
- Standard ACL Configuration Mode Commands
- Extended ACL Configuration Mode Commands
- Preposition Configuration Mode Commands
- PKI Certification Authority Configuration Mode Commands
- PKI Global Settings Configuration Mode Commands
- SSL Accelerated Service Configuration Mode Commands
- SSL Cipher List Configuration Mode Commands
- SSL Global Service Configuration Mode Commands
- SSL Host Peering Service Configuration Mode Commands
- SSL Management Service Configuration Mode Commands
- WCCP Configuration Mode Commands
- Service Context Configuration Mode Commands
- Service Node Group Configuration Mode Commands
- Service Node Configuration Mode Commands
- Service Context Configuration Mode Commands
- Class Map Configuration Mode Commands
- Policy Map Configuration Mode Commands
- Policy Map Class Configuration Mode Commands
- Acronyms and Abbreviations
- Command Summary by Mode
Cisco Wide Area Application Services Command Reference 6.4.1x
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- October 17, 2018
Chapter: Policy Map Configuration Mode Commands
Policy Map Configuration Mode Commands
To configure an AppNav or optimization policy map, use the policy-map global configuration command. To unconfigure settings, use the no form of this command.
policy-map type { appnav | waas } policymap-name [ rename new-name ]
no policy-map type { appnav | waas } policymap-name
Syntax Description
Policy map name (up to 40 alpha-numeric characters and hyphen, beginning with a letter). |
|
(Optional) Renames the policy map with the specified new name. |
Defaults
Command Modes
Device Modes
Usage Guidelines
Use the policy-map command to add or modify policy maps that associate policy actions with class maps. This command invokes the Policy Map configuration mode, which is indicated by a different prompt (config-pmap). To return to global configuration mode, enter the exit command.
You can delete a policy map by using the no form of this command.
The WAAS software comes with many class maps and policy rules that help your WAAS system classify and optimize some of the most common traffic on your network. Before you create a new class map or policy rule, we recommend that you review the default class map and policy rules and modify them as appropriate. It is usually easier to modify an existing class map or policy rule than to create a new one. For a list of the default applications, class maps, and policy rules, see the Cisco Wide Area Application Services Configuration Guide.
Note
We strongly recommend that you use the WAAS Central Manager GUI to centrally configure policy maps for your WAAS devices. For more information, see the Cisco Wide Area Application Services Configuration Guide.
Examples
The following example shows how to configure a WAAS optimization policy map:
The following example shows how to configure an AppNav policy map:
Related Commands
(config-pmap) class
To configure the service policy for a class map, use the class policy map configuration command. To unconfigure the service policy, use the no form of this command.
class classmap-name [ insert-before [ existing_class ]]
no class classmap-name [ insert-before [ existing_class ]]
Syntax Description
Defaults
Command Modes
Device Modes
Usage Guidelines
Use the class command to add or modify a service policy (policy rule) for traffic identified by a class map. This command invokes the Policy Map Class configuration mode, which is indicated by a different prompt (config-pmap-c). For more information on Policy Class Map configuration mode commands, see the “ Policy Map Class Configuration Mode Commands ” section. To return to global configuration mode, enter the exit command.
You can delete a policy rule by using the no form of this command.
Examples
The following example shows how to configure a policy rule in an optimization policy map:
The following example shows how to configure an AppNav policy rule in a policy map:
Related Commands
(config-pmap) description
To configure the policy map description, use the description policy map configuration command. To unconfigure the description, use the no form of this command.
Syntax Description
Specifies a description of the policy map with up to 200 alphanumeric and space characters. |
Defaults
Command Modes
Device Modes
Examples
The following example shows how to configure a policy map description:
Feedback