Cisco SG500-28 28-port Gigabit Stackable Managed Switch
Specifications Overview
| Series | Cisco Small Business 500 Series Stackable Managed Switches |
|---|---|
| Status |
End of Sale
EOL Details
|
| Release Date | 30-MAR-2012 |
| End-of-Sale Date | 12-APR-2018 Details |
| End-of-Support Date | 30-APR-2023 Details |
| Product ID | |
-
Document Categories-
At-a-Glance
- Cisco SG500X Switches Accessories At-A-Glance (PDF - 299 KB)
-
Brochures
- Cisco 500 Series Stackable Managed Switches Overview (PDF - 763 KB)
- Cisco 500 Series Stackable Managed Switches Overview (French) (PDF - 777 KB)
- Cisco 500 Series Stackable Managed Switches Overview (German) (PDF - 777 KB)
- Cisco 500 Series Stackable Managed Switches Overview (Italian) (PDF - 766 KB)
- Cisco 500 Series Stackable Managed Switches Overview (LATAM Spanish) (PDF - 778 KB)
- SMB Miercom Report: Managed Stackable Switches Comparison (PDF - 1 MB)
-
Command References
- Cisco 500 Series Stackable Managed Switches Command Line Interface Reference Guide Firmware Release 1.4.0.x (PDF - 3 MB)
- Cisco 500 Series Stackable Managed Switches Command Line Interface Reference Guide Firmware Release 1.3.7 (PDF - 3 MB)
- Cisco 500 Series Stackable Managed Switches Command Line Interface Reference Guide Firmware Release 1.3.5 (PDF - 3 MB)
-
Configuration Examples and TechNotes
- 802.1x Host and Session Authentication on Sx500 Series Stackable Switches
- Access an SMB Switch CLI using SSH or Telnet
- Access the CLI via PuTTY using a Console Connection on 300 and 500 Series Managed Switches
- Add Access Control List (ACL) to Interface Binding on Sx500 Series Stackable Switches
- Add Aggregate Policer in QoS Advanced Mode on Sx500 Series Stackable Switches
- Address Resolution Protocol (ARP) Inspection Interface Settings on Sx500 Series Stackable Switches
- Address Resolution Protocol (ARP) Inspection Properties Configuration on Sx500 Series Stackable Switches
- Address Resolution Protocol (ARP) Inspection VLAN Settings Configuration on Sx500 Series Stackable Switches
- Administrator Password Recovery for 300 and 500 Series Managed Switches
- Bandwidth Per Port Configuration on Sx500 Series Stackable Switches
- Cisco Discovery Protocol (CDP) Properties on Sx500 Series Stackable Switches
- Configuration Migration Service Tool
- Configuration of 802.1x Properties on Sx500 Series Stackable Switches
- Configuration of Address Resolution Protocol (ARP) Access Control and Access Control Rules on Sx500 Series Stackable Switches
- Configuration of Address Resolution Protocol (ARP) on Sx500 Series Stackable Switches
- Configuration of Central Processing Unit (CPU) Utilization on the Sx500 Series Stackable Switches
- Configuration of CoS/802.1p to Queue Mapping on Sx500 Series Stackable Switches
- Configuration of Denial of Service Prevention Techniques (Security Suite) on Sx500 Series Stackable Switches
- Configuration of Egress Shaping per Queue on Sx500 Series Stackable Switches
- Configuration of Forward All Multicast on Sx500 Series Stackable Switches
- Configuration of History and History Table in Remote Network Monitoring (RMON) on Sx500 Series Stackable Switches
- Configuration of IP Source Guard Binding Database on Sx500 Series Stackable Switches
- Configuration of IPv6 Neighbors on the Sx500 Series Stackable Switches
- Configuration of IPv6 Tunnel on Sx500 Series Stackable Switches
- Configuration of Idle Session Timeout on Sx500 Series Stackable Switches
- Configuration of Internet Group Management Protocol (IGMP)/Multicast Listener Discovery (MLD) IP Multicast Group on the Sx500 Series Stackable Switches
- Configuration of Multicast Listener Discovery (MLD) Snooping on Sx500 Series Stackable Switches
- Configuration of Multicast Router Ports on Sx500 Series Stackable Switches
- Configuration of Out of Profile DSCP Mapping on Sx500 Series Stackable Switches
- Configuration of Port Security on Sx500 Series Stackable Switches
- Configuration of Port and VLAN Mirroring on the Sx500 Series Stackable Switches
- Configuration of QoS Properties on Sx500 Series Stackable Switches
- Configuration of Reserved MAC Address on Sx500 Series Stackable Switches
- Configuration of Simple Network Management Protocol (SNMP) Engine ID on Sx500 Series Stackable Switches
- Configuration of Static MAC Address on Sx500 Series Stackable Switches
- Configuration of TACACS+ Parameters on Sx500 Series Stackable Switches
- Configuration of Ternary Content Addressable Memory (TCAM) Allocation on Sx500 Series Stackable Switches
- Configuration of Unregistered Multicast on Sx500 Series Stackable Switches
- Configuration of VLAN Ingress Rate Limit on Sx500 Series Stackable Switches
- Configuration of VLAN to Multiple Spanning Tree Protocol (MSTP) Instance on Sx500 Series Stackable Switches
- Configure 802.1x Port Authentication Setting on a Switch
- Configure Access Port Multicast TV Virtual Local Area Network (VLAN) Membership on a Switch
- Configure CDP Settings on a Switch
- Configure CDP Settings on a Switch through the CLI
- Configure Customer Port Multicast TV Virtual Local Area Network (VLAN) Membership on a Switch
- Configure Customer Premises Equipment (CPE) to a Virtual Local Area Network (VLAN) on a Switch
- Configure DHCP Trusted Interface Settings on a Switch through the CLI
- Configure Dynamic Host Configuration Protocol (DHCP) Image Upgrade Settings on a Switch
- Configure Dynamic Host Configuration Protocol (DHCP) Image Upgrade Settings on a Switch through the Command Line Interface (CLI)
- Configure Dynamic Host Configuration Protocol (DHCP) Relay Settings on a Switch through the Command Line Interface (CLI)
- Configure Dynamic Host Configuration Protocol (DHCP) Snooping and Relay Settings on your Switch
- Configure Dynamic Host Configuration Protocol (DHCP) Snooping on a Switch through the Command Line Interface (CLI)
- Configure Dynamic Host Configuration Protocol (DHCP) Trusted Interface Settings on a Switch
- Configure GVRP Settings on a Switch
- Configure GVRP Settings on a Switch through the CLI
- Configure Global 802.1x Properties on a Switch through the CLI
- Configure Global Green Ethernet Properties on a Switch
- Configure Global Green Ethernet Properties on a Switch through the Command Line Interface (CLI)
- Configure Global Link Layer Discovery Protocol (LLDP) Settings on a Switch through the Command Line Interface (CLI)
- Configure Green Ethernet Port Settings on a Switch
- Configure Green Ethernet Port Settings on a Switch through the Command Line Interface (CLI)
- Configure IPv6-based Access Control List (ACL) and Access Control Entry (ACE) on a Switch
- Configure IPv4 Interface in Layer 2 on Sx500 Series Stackable Switches
- Configure IPv4 Static Routes Settings on a Switch
- Configure IPv4 Static Routes Settings on a Switch through the CLI
- Configure IPv4-based Access Control List (ACL) and Access Control Entry (ACE) on a Switch
- Configure Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) Network Policy Settings on a Switch
- Configure Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) Network Policy Settings on a Switch through the Command Line Interface (CLI)
- Configure Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) Port Settings on a Switch
- Configure Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) Port Settings on a Switch through the Command Line Interface (CLI)
- Configure Link Layer Discovery Protocol (LLDP) Port Settings on a Switch
- Configure Link Layer Discovery Protocol (LLDP) Port Settings on a Switch through the Command Line Interface (CLI)
- Configure Link Layer Discovery Protocol (LLDP) Properties on a Switch
- Configure MAC-Based Access Control List (ACL) and Access Control Entry (ACE) on a Managed Switch
- Configure MAC-based VLAN Groups on a Switch through the CLI
- Configure MLD Snooping Settings on a Switch through the CLI
- Configure Media Access Control (MAC)-Based Virtual Local Area Network (VLAN) Groups on a Switch
- Configure Media Access Control (MAC)-Based Virtual Local Area Network (VLAN) Groups to VLAN on a Switch
- Configure Multicast Properties on a Switch
- Configure Multicast Properties on a Switch through the CLI
- Configure Multicast TV Group to Virtual Local Area Network (VLAN) on a Switch
- Configure Multiple Spanning Tree Protocol (MSTP) Instance Settings on Sx500 Series Stackable Switches
- Configure Option 125 on a Server to Allow Dynamic Host Configuration Protocol (DHCP) Auto Image Updates on a Switch
- Configure Password Settings on a Switch through the Command Line Interface (CLI)
- Configure Port Settings on Sx500 Series Stackable Switches
- Configure Port to VLAN Interface Settings on a Switch through the CLI
- Configure Private VLAN Membership Settings on a Switch through the CLI
- Configure Private Virtual Local Area Network (VLAN) Settings on a Switch
- Configure Protocol-based VLAN Groups on a Switch through the CLI
- Configure Remote Log Server on a Switch
- Configure Remote Network Monitoring (RMON) Alarms on a Switch
- Configure Remote Network Monitoring (RMON) Alarms on a Switch through the Command Line Interface (CLI)
- Configure Remote Network Monitoring (RMON) Events Control Settings on a Switch
- Configure Remote Network Monitoring (RMON) Events Control Settings on a Switch through the Command Line Interface (CLI)
- Configure Remote Network Monitoring (RMON) History Control Settings on a Switch
- Configure Remote Network Monitoring (RMON) History Control Settings on a Switch through the Command Line Interface (CLI)
- Configure SNMP Notification Recipients on a Switch through the CLI
- Configure SSH Server Authentication Settings on a Switch through the CLI
- Configure STP Settings on a Switch through the CLI
- Configure Secure Shell (SSH) Server Authentication Settings on a Switch
- Configure Secure Shell (SSH) User Authentication Settings on a Switch
- Configure Simple Network Management Protocol (SNMP) Communities on a Switch
- Configure Simple Network Management Protocol (SNMP) Groups on a Switch
- Configure Simple Network Management Protocol (SNMP) Groups on a Switch through the Command Line Interface (CLI)
- Configure Simple Network Management Protocol (SNMP) Notification Filter on a Switch
- Configure Simple Network Management Protocol (SNMP) Notification Recipients on a Switch
- Configure Simple Network Management Protocol (SNMP) Trap Settings on a Switch
- Configure Simple Network Management Protocol (SNMP) Users on a Switch
- Configure Simple Network Management Protocol (SNMP) Users on a Switch through the Command Line Interface (CLI)
- Configure Simple Network Management Protocol (SNMP) View on a Switch through the Command Line Interface (CLI)
- Configure Simple Network Management Protocol (SNMP) Views on a Switch
- Configure Simple Network Time Protocol (SNTP) Authentication Settings on a Switch
- Configure Simple Network Time Protocol (SNTP) Authentication Settings on a Switch through the Command Line Interface (CLI)
- Configure Simple Network Time Protocol (SNTP) Settings on a Switch
- Configure Simple Network Time Protocol (SNTP) Settings on a Switch through the Command Line Interface (CLI)
- Configure Simple Network Time Protocol (SNTP) Unicast Server Settings on a Switch
- Configure Spanning Tree Protocol (STP) on a Switch
- Configure Stack Settings on a Switch through the Command Line Interface (CLI)
- Configure Static MAC Address on the Sx500 and SG500X Series Stackable Switches
- Configure Subnet-based VLAN Groups on a Switch through the CLI
- Configure System Time Settings on a Switch
- Configure System Time Settings on a Switch through the Command Line Interface (CLI)
- Configure Telephony Organizationally Unique Identifiers (OUI) Interface Settings on a Switch
- Configure Telephony Organizationally Unique Identifiers (OUI) Settings on a Switch
- Configure Time Range Settings on a Switch
- Configure Time Range Settings on a Switch through the Command Line Interface (CLI)
- Configure Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) Service Settings on a Switch
- Configure User Accounts to Enhance Security on a Cisco Smart or Managed Switch
- Configure Virtual Local Area Network (VLAN) Interface Settings on an Sx300 or Sx500 Series Switch
- Configure Virtual Local Area Network (VLAN) Protocol-Based Groups to VLAN on a Switch
- Configure Virtual Router Redundancy Protocol (VRRP) on SG500X Series Stackable Switches
- Configure Voice Virtual Local Area Network (VLAN) Properties on a Switch
- Configure a Static MAC Address on the Sx500 and SG500X Series Stackable Switches through the CLI
- Configure a VLAN Protocol-Based Group on a Switch
- Configure a VLAN on a Switch
- Configure the Internet Protocol (IP) Address Settings on a Switch through the Command Line Interface (CLI)
- Configuring LAG Settings on a Switch through the Command Line Interface (CLI)
- Creating a text file to adjust IP settings on a switch
- Creation and Configuration of IP Multicast Groups on the Sx500 Series Stackable Switches
- Define QoS Class Mapping on Sx500 Series Stackable Switches
- Denial of Service (DOS) SYN Filtering Configuration on Sx500 Series Stackable Switches
- Denial of Service (DoS) IP Fragments Filtering Configuration on Sx500 Series Stackable Switches
- Denial of Service (DoS) Martian Address Configuration on Sx500 Series Stackable Switches
- Denial of Service (DoS) SYN Rate Protection Configuration on Sx500 Series Stackable Switches
- Dynamic MAC Address Management on the Sx500 and SG500X Series Stackable Switches
- Edit Secure Sockets Layer (SSL) Server Authentication Settings on Sx500 Series Stackable Switches
- Enable Secure Shell (SSH) Service on 300/500 Series Managed Switches
- File Management on Sx500 Series Stackable Switches
- IP Source Guard Configuration on Sx500 Series Stackable Switches
- IPv6 Default Router List Configuration on Sx500 Series Stackable Switches
- IPv6 Global Configuration on Sx500 Series Stackable Switches
- IPv6 Interface Configuration on Sx500 Series Stackable Switches
- Link Aggregation Control Protocol (LACP) Configuration on Sx500 Series Stackable Switches
- Link Aggregation Group (LAG) Management and Settings on Sx500 Series Stackable Switches
- Manage Domain Name System (DNS) Servers on Sx500 Series Stackable Switches
- Manage Interface Statistics on a Switch
- Manage Remote Network Monitoring (RMON) Statistics on a Switch
- Manage the Link Layer Discovery Protocol (LLDP) Neighbor Information on a Switch
- Management Access Authentication Setup on Sx500 Series Stackable Switches
- Management Access Method Access Profile Settings on Sx500 Series Stackable Switches
- Management Access Method Profile Rules Configuration on Sx500 Series Stackable Switches
- Manual Configuration of Time Settings of SG200, SG300, and SG500 Series Switches
- Map Differentiated Services Code Point to Queue on Sx500 Series Stackable Switches
- Monitoring Dynamic MAC Addresses on Cisco Managed Switches
- Multicast MAC Group Address Configuration on Sx500 Series Stackable Switches
- Multiple Spanning Tree Protocol (MSTP) Interface Settings Configuration on Sx500 Series Stackable Switches
- Password Strength Settings on Sx500 Series Stackable Switches
- Ping a Host on Sx500 Series Stackable Switches
- Port Bandwidth Control Settings on SG 500 Series Switches
- Power over Ethernet (PoE) Properties on Sx500 Series Stackable Switches
- Power over Ethernet (PoE) Settings Configuration on Sx500 Series Stackable Switches
- Quality of Service (QoS) Advanced Mode Global Settings Configuration on Sx500 Series Stackable Switches
- Quality of Service (QoS) Basic Mode Interface Settings Configuration on Sx500 Series Stackable Switches
- Quality of Service (QoS) Policy Binding Configuration on Sx500 Series Stackable Switches
- Quality of Service (QoS) Policy Class Maps Configuration on Sx500 Series Stackable Switches
- Quality of Service (QoS) Queue Settings on Sx500 Series Stackable Switches
- Quality of Service (QoS) Single Policer Configuration on Sx500 Series Stackable Switches
- Queue Statistics on Sx500 Series Stackable Switches
- RAM Memory Log Status on Sx500 Series Stackable Switches
- Rapid Spanning Tree Protocol (RSTP) Interface Settings Configuration on Sx500 Series Stackable Switches
- Remote Authentication Dial-In User Service (RADIUS) Settings on Sx500 Series Stackable Switches
- Reset Auto Voice Virtual Local Area Network (VLAN) Settings on a Switch
- Secure Sensitive Data (SSD) Properties on Sx500 Series Stackable Switches
- Secure Shell (SSH) Client User Authentication Settings on Sx500 Series Stackable Switches
- Secure Shell (SSH) Server Authentication Configuration for SSH Clients on Sx500 Series Stackable Switches
- Secure Shell (SSH) Server User Authentication Settings on Sx500 Series Stackable Switches
- Setting System Time Dynamically from a SNTP Server for 200, 300, & 500 Series Managed Switches
- Setting Time Range on 300 and 500 Series Managed Switches
- Setup Host Mapping on Sx500 Series Stackable Switches
- Smartport Configuration on Sx500 Series Stackable Switches
- Smartport Interface Settings on Sx500 Stackable Switches
- Smartport Type Settings on Sx500 Series Stackable Switches
- Spanning Tree Protocol (STP) Configuration on Sx500 Series Stackable Switches
- Spanning Tree Protocol (STP) Interface Settings Configuration on Sx500 Series Stackable Switches
- Spanning Tree Protocol (STP) Status and Global Settings on Sx500 Series Stackable Switches
- Stack Settings on Sx500 Series Stackable Switches
- Storm Control Configuration on Sx500 Series Stackable Switches
- Switches Glossary of Terms
- System Settings on the Sx500 Series Stackable Switches
- TCP/UDP Services on Sx500 Series Stackable Switches
- Traceroute Configuration on Sx500 Series Stackable Switches
- Track and View Aggregate Policer Statistics on Sx500 Series Stackable Switches
- UDP Relay Configuration on Sx500 Series Stackable Switches
- User Account Configuration on Sx500 Series Stackable Switches
- VLAN Configuration via CLI on 300/500 Series Managed Switches
- View 802.1x Extensible Authentication Protocol (EAP) Traffic Statistics on Sx500 Series Stackable Switches
-
Data Sheets
- Cisco 500 Series Stackable Managed Switches Data Sheet
- Cisco 500 Series Stackable Managed Switches Data Sheet (Chinese) (PDF - 844 KB)
- Cisco 500 Series Stackable Managed Switches Data Sheet (French) (PDF - 565 KB)
- Cisco 500 Series Stackable Managed Switches Data Sheet (German) (PDF - 560 KB)
- Cisco 500 Series Stackable Managed Switches Data Sheet (Italian) (PDF - 558 KB)
- Cisco 500 Series Stackable Managed Switches Data Sheet (LATAM Spanish) (PDF - 557 KB)
-
End-of-Life and End-of-Sale Notices
English
- End-of-Sale and End-of-Life Announcement for the Cisco 500 Series Stackable Managed Switches
- End-of-Sale and End-of-Life Announcement for the Cisco SF500-24MP and SF500-48MP Stackable Managed Switches
- End-of-Sale and End-of-Life Announcement for the Cisco SF500-48MP, SF500-24MP, SG500X-48MP, and SG500X-24MPP Stackable Managed Switches in China
- End-of-Sale and End-of-Life Announcement for the Cisco SG500XG-8F8T 16-port 10-Gigabit Stackable Managed Switch
French - Canadian
- Annonce d’arrêt de commercialisation et de fin de vie de Cisco SF500-24MP and SF500-48MP Stackable Managed Switches
- Annonce d’arrêt de commercialisation et de fin de vie de Cisco 500 Series Stackable Managed Switches
- Annonce d’arrêt de commercialisation et de fin de vie des commutateurs gérés empilables Cisco SG500XG-8F8T de 16 ports et de 10 Gigabit
-
Install and Upgrade Guides
-
Maintain and Operate Guides
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.4.0.x (PDF - 7 MB)
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.3.7.x (PDF - 6 MB)
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.3.5.x (PDF - 6 MB)
-
Release Notes
- Open Source Document for Cisco 500 Series Switches Software Version 1.4.0.x (PDF - 783 KB)
- Open Source Document for Cisco 500 Series Switches Software Version 1.3.5 (PDF - 781 KB)
- Open Source Document for Cisco 10XG Series Switches Software Version 1.4.0.x (PDF - 783 KB)
- Open Source Document for Cisco Sx10G Switches Software Version 1.3.5 (PDF - 781 KB)
- Open Source Used In Cisco Sx500 Series Switches 1.4.9.x (PDF - 808 KB)
- Open Source Used In Sx500 Series Switches 1.4.1.x (PDF - 787 KB)
- Open Source Used In Sx500 Series Switches 1.3.7.x (PDF - 781 KB)
- Open Source Used In Sx500 Series Switches 1.3.0.x (PDF - 46 KB)
- Open Source Used In Sx500 Series Switches Release 1.2.9.x (PDF - 43 KB)
- Open Source Used In Sx10G Series Switches 1.4.1.x (PDF - 787 KB)
- Open Source Used In Sx10G Series Switches 1.3.7.x (PDF - 781 KB)
- Open Source Used in Cisco 500 Series Switches Release 1.4.8.x (PDF - 808 KB)
- Open Source Used in Cisco 500 Series Switches Release 1.4.5.x (PDF - 787 KB)
- Open Source Used in Cisco 500 Series Switches Release 1.4.2.x (PDF - 787 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.4.8.6 (PDF - 132 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.4.7 (PDF - 133 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.4.7.06 (PDF - 133 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.4.5.02 (PDF - 127 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.4.2.04 (PDF - 127 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.4.1 (PDF - 126 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.4.0 (PDF - 135 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.3.7.x (PDF - 132 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.3.5.x (PDF - 131 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.3.0 (PDF - 189 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.3.0.62 (PDF - 110 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.2.9 (PDF - 76 KB)
- Release Notes for 200, 300, and 500 Series Switches Software Version 1.4.10.6 (PDF - 139 KB)
- Release Notes for 200, 300, and 500 Series Switches Software Version 1.4.9.4 (PDF - 128 KB)
-
Sales Resources
- Cisco 500 Series Stackable Switches Product Presentation (PDF - 16 MB)
-
Security Advisories, Responses and Notices
Most Recent
- Multiple Vulnerabilities in OpenSSL (June 2015) Affecting Cisco Products 01-Jul-2019
- Multiple Vulnerabilities in OpenSSL (December 2015) Affecting Cisco Products 01-Jul-2019
- Multiple Vulnerabilities in OpenSSL Affecting Cisco Products: September 2016 30-Jun-2019
- Cisco Small Business Switches Secure Shell Certificate Authentication Bypass Vulnerability 01-May-2019
- Cisco Small Business Managed Switches Denial of Service Vulnerability 25-Apr-2019
- Cisco Small Business Switches Privileged Access Vulnerability 16-Jan-2019
- Cisco Small Business 300 and 500 Series Managed Switches HTTP Response Splitting Vulnerability 07-Apr-2018
- Cisco Small Business Switches SSH Packet Processing Denial of Service Vulnerability 07-Apr-2018
- Cisco Small Business 500 Series Switches Denial of Service Vulnerability 07-Apr-2018
- Cisco Small Business 300 and 500 Series Managed Switches Cross-Site Scripting Vulnerability 07-Apr-2018
-
Translated End-User Guides
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.4.0.x (French) (PDF - 5 MB)
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.4.0.x (German) (PDF - 7 MB)
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.4.0.x (Italian) (PDF - 7 MB)
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.4.0.x (Simplified Chinese) (PDF - 6 MB)
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.4.0.x (Spanish) (PDF - 7 MB)
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.3.7.x (Chinese) (PDF - 7 MB)
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.3.7.x (French) (PDF - 7 MB)
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.3.7.x (German) (PDF - 7 MB)
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.3.7.x (Italian) (PDF - 7 MB)
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.3.7.x (Spanish) (PDF - 7 MB)
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.3.5.x (Chinese) (PDF - 7 MB)
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.3.5.x (French) (PDF - 8 MB)
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.3.5.x (German) (PDF - 8 MB)
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.3.5.x (Italian) (PDF - 7 MB)
- Cisco 500 Series Stackable Managed Switches Administration Guide Firmware Release 1.3.5.x (Spanish) (PDF - 7 MB)
- Cisco 500 Series Stackable Managed Switches Quick Start Guide (Chinese) (PDF - 1 MB)
- Cisco 500 Series Stackable Managed Switches Quick Start Guide (French) (PDF - 766 KB)
- Cisco 500 Series Stackable Managed Switches Quick Start Guide (German) (PDF - 762 KB)
- Cisco 500 Series Stackable Managed Switches Quick Start Guide (Italian) (PDF - 762 KB)
- Cisco 500 Series Stackable Managed Switches Quick Start Guide (Russian) (PDF - 771 KB)
- Cisco 500 Series Stackable Managed Switches Quick Start Guide (Spanish) (PDF - 762 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.3.7.x (French) (PDF - 178 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.3.5.x (French) (PDF - 194 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.3.0 (French) (PDF - 167 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.3.0.62 (French) (PDF - 166 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.2.9 (French) (PDF - 107 KB)
-
Troubleshooting TechNotes
- CSCvd61441: Sx500 DHCP Service Fails when ACL Logging is Configured
- Configuration of System Log Setting on Sx500 Series Stackable Switches
- Configuring Switch as a Unicast Simple Network Time Protocol SNTP Client via CLI
- SR-681040897 SG500-52P: Stack Issues/ Rebooting
- SR-680374472 SG500: Vulnerability issues with SSL
- SR-680259480 - US SG500: MIB Walk Issues
- View Etherlike Statistics on Sx500 Series Stackable Switches
-
White Papers
SMB Miercom Reports
- SMB Miercom Report: Managed Stackable Switches Comparison (PDF - 1 MB)
- SMB Miercom Report: Managed Stackable Switches Comparison (Chinese) (PDF - 5 MB)
- SMB Miercom Report: Managed Stackable Switches Comparison (French) (PDF - 5 MB)
- SMB Miercom Report: Managed Stackable Switches Comparison (German) (PDF - 5 MB)
- SMB Miercom Report: Managed Stackable Switches Comparison (Italian) (PDF - 5 MB)
- SMB Miercom Report: Managed Stackable Switches Comparison (Latam Spanish) (PDF - 5 MB)
- SMB Miercom Report: Managed Stackable Switches Comparison (Portuguese Brazilian) (PDF - 5 MB)
Contact Cisco
Technical Support
- Open a TAC Case Online
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
Technical Sales Questions
- Contact Us for Sales Questions
- Call 1 800 553 6387
- US/CAN | 5am - 5pm Pacific
- Other Countries
Cisco Services
-
Feedback