Cisco SG300-10 10-Port Gigabit Managed Switch
Specifications Overview
| Series | Cisco Small Business 300 Series Managed Switches |
|---|---|
| Product ID | |
| Status | Orderable Buy |
| End-of-Sale Date | None Announced |
| End-of-Support Date | None Announced |
| Visio Stencil (4 MB .zip file) | |
-
Document Categories-
Brochures
- Cisco 300 Series Switches Product Overview (French) (PDF - 1 MB)
- Cisco 300 Series Switches Product Overview (German) (PDF - 1 MB)
- Cisco 300 Series Switches Product Overview (Italian) (PDF - 1 MB)
- Cisco 300 Series Switches Product Overview (Spanish) (PDF - 1 MB)
- Miercom Independent 3rd Party Lab Test (PDF - 150 KB)
-
Command References
- Cisco 300 Series Command Line Interface Reference Guide Release 1.2.9 (PDF - 2 MB)
- Cisco 300 Series Managed Switches Command Line Interface Guide Release 1.4.0 (PDF - 3 MB)
- Cisco 300 Series Managed Switches Command Line Interface Reference Guide Release 1.3 (PDF - 2 MB)
- Cisco Small Business 300 Series Managed Switches Command Line Interface Guide Release 1.3.7 (PDF - 3 MB)
-
Configuration Examples and TechNotes
- 802.1X Host and Session Authentication Configuration on 200/220/300 Series Switches
- 802.1X Port Authentication Configuration on Cisco 200/300 Series Managed Switches
- 802.1X Properties Configuration on the 200/300 Series Managed Switches
- 802.1X Time Range Configuration on 300 Series Managed Switches
- Access Profile Rules Configuration on 200/300 Series Managed Switches
- Access Profiles Configuration on 200/300 Series Managed Switches
- Access an SMB Switch CLI using SSH or Telnet
- Access the CLI via PuTTY using a Console Connection on 300 and 500 Series Managed Switches
- Accessing Sx300 Series switches through CLI
- Activate Traceroute Configuration on a Switch
- Add IP Multicast Group Addresses on the 200/300 Series Managed Switches
- Add a DNS Server on the 200/300 Series Managed Switches
- Add a Multicast MAC Group Address on the 200/300 Series Managed Switches
- Add a Simple Network Time Protocol (SNTP) Server on 200/300 Series Managed Switches
- Address Resolution Protocol (ARP) Access Control Rules Configuration on 300 Series Managed Switches
- Address Resolution Protocol (ARP) Configuration on the 200/300 Series Managed Switches
- Address Resolution Protocol (ARP) Inspection Properties Configuration on 300 Series Managed Switches
- Administrator Password Recovery for 300 and 500 Series Managed Switches
- Assign Device Host Name on 300 Series Managed Switches Using Command Line Interface
- Backup Firmware/Boot Code to TFTP Server on 200/300 Series Managed Switches
- Bandwidth Configuration on the 200/300 Series Managed Switches
- Bind Access Control List (ACL) to an Interface on 200/300 Series Managed Switches
- Bonjour - Discovery Configuration on 200/300 Series Managed Switches
- Cisco Discovery Protocol (CDP) Interface Settings on 200/300 Series Managed Switches
- Cisco Discovery Protocol (CDP) Properties on 200/300 Series Managed Switches
- Cisco Discovery Protocol (CDP) Statistics on the 200/300 Series Managed Switches
- Configuration Migration Service Tool
- Configuration of Download and Backup Configuration Settings and Logs on 200/300 Series Managed Switches
- Configuration of GARP VLAN Registration Protocol (GVRP) on 300 Series Managed Switches
- Configuration of Host Mapping on the 200/300 Series Managed Switches
- Configuration of Idle Session Timeout on the 200/300 Series Managed Switches
- Configuration of MAC-Based Groups to VLAN on 300 Series Switches
- Configuration of Multicast Forward All for VLAN Ports on 300 Series Switches
- Configuration of Native VLAN on the SF and SG 200/300 Series Managed Switches
- Configuration of Power over Ethernet (PoE) Properties on Cisco 200/300 Series Managed Switches
- Configuration of Power over Ethernet (PoE) Settings on Cisco 200/300 Series Managed Switches
- Configuration of Quality of Service (QoS) Queue on 200/300 Series Managed Switches
- Configuration of Reserved Mac Addresses on the 300 Series Managed Switches
- Configuration of Unregistered Multicast on 200/300 Series Managed Switches
- Configuration of VLAN Membership of an Interface on the 200/300 Series Managed Switches
- Configuration of the Default VLAN on 200/300 Series Managed Switches
- Configuration of the Secure Sensitive Data (SSD) Properties on 200/300 Series Managed Switches
- Configure 802.1x Port Authentication Setting on a Switch
- Configure CDP Settings on a Switch through the CLI
- Configure DHCP Trusted Interface Settings on a Switch through the CLI
- Configure Dynamic Host Configuration Protocol (DHCP) Image Upgrade Settings on a Switch
- Configure Dynamic Host Configuration Protocol (DHCP) Relay Settings on a Switch through the Command Line Interface (CLI)
- Configure Dynamic Host Configuration Protocol (DHCP) Snooping on a Switch through the Command Line Interface (CLI)
- Configure Dynamic Host Configuration Protocol (DHCP) Trusted Interface Settings on a Switch
- Configure GVRP Settings on a Switch
- Configure GVRP Settings on a Switch through the CLI
- Configure Global 802.1x Properties on a Switch through the CLI
- Configure Global Green Ethernet Properties on a Switch
- Configure Global Green Ethernet Properties on a Switch through the Command Line Interface (CLI)
- Configure Global Link Layer Discovery Protocol (LLDP) Settings on a Switch through the Command Line Interface (CLI)
- Configure Green Ethernet Port Settings on a Switch
- Configure Green Ethernet Port Settings on a Switch through the Command Line Interface (CLI)
- Configure Green Ethernet on 200/300 Series Managed Switches
- Configure IPv4 Static Routes Settings on a Switch
- Configure IPv4 Static Routes Settings on a Switch through the CLI
- Configure IPv4-Based Access Lists on the 200/300 Series Managed Switches
- Configure Internet Group Management Protocol (IGMP) Snooping on the 200/300 Series Managed Switches
- Configure Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) Network Policy Settings on a Switch
- Configure Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) Network Policy Settings on a Switch through the Command Line Interface (CLI)
- Configure Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) Port Settings on a Switch
- Configure Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) Port Settings on a Switch through the Command Line Interface (CLI)
- Configure Link Layer Discovery Protocol (LLDP) Port Settings on a Switch
- Configure Link Layer Discovery Protocol (LLDP) Port Settings on a Switch through the Command Line Interface (CLI)
- Configure Link Layer Discovery Protocol (LLDP) Properties on a Switch
- Configure MLD Snooping Settings on a Switch through the CLI
- Configure MLD Snooping on the 200/300 Series Managed Switches
- Configure Multicast Properties on a Switch
- Configure Multicast Properties on a Switch through the CLI
- Configure Multiple Spanning Tree Protocol (MSTP) on a Switch
- Configure Option 125 on a Server to Allow Dynamic Host Configuration Protocol (DHCP) Auto Image Updates on a Switch
- Configure Password Settings on a Switch through the Command Line Interface (CLI)
- Configure Password Strength and Complexity Settings on the Switch
- Configure Port Settings on 200/300 Series Managed Switches
- Configure Port Settings to Optimize Traffic Flow on a Switch
- Configure Port to VLAN Interface Settings on a Switch through the CLI
- Configure Private VLAN Membership Settings on a Switch through the CLI
- Configure Private Virtual Local Area Network (VLAN) Settings on a Switch
- Configure QoS Properties on 200/300 Series Managed Switches
- Configure Remote Network Monitoring (RMON) Alarms on a Switch
- Configure Remote Network Monitoring (RMON) Alarms on a Switch through the Command Line Interface (CLI)
- Configure Remote Network Monitoring (RMON) Events Control Settings on a Switch
- Configure Remote Network Monitoring (RMON) Events Control Settings on a Switch through the Command Line Interface (CLI)
- Configure Remote Network Monitoring (RMON) History Control Settings on a Switch
- Configure Remote Network Monitoring (RMON) History Control Settings on a Switch through the Command Line Interface (CLI)
- Configure SNMP Notification Recipients on a Switch through the CLI
- Configure SSH Server Authentication Settings on a Switch through the CLI
- Configure STP Settings on a Switch through the CLI
- Configure Secure Shell (SSH) Server Authentication Settings on a Switch
- Configure Secure Shell (SSH) User Authentication Settings on a Switch
- Configure Simple Network Management Protocol (SNMP) Communities on a Switch
- Configure Simple Network Management Protocol (SNMP) Engine ID on 300 Series Managed Switches
- Configure Simple Network Management Protocol (SNMP) Groups on a Switch
- Configure Simple Network Management Protocol (SNMP) Groups on a Switch through the Command Line Interface (CLI)
- Configure Simple Network Management Protocol (SNMP) Notification Filter on a Switch
- Configure Simple Network Management Protocol (SNMP) Notification Recipients on a Switch
- Configure Simple Network Management Protocol (SNMP) Trap Settings on a Switch
- Configure Simple Network Management Protocol (SNMP) Users on a Switch
- Configure Simple Network Management Protocol (SNMP) Users on a Switch through the Command Line Interface (CLI)
- Configure Simple Network Management Protocol (SNMP) View on a Switch through the Command Line Interface (CLI)
- Configure Simple Network Management Protocol (SNMP) Views on a Switch
- Configure Simple Network Time Protocol (SNTP) Authentication Settings on a Switch
- Configure Simple Network Time Protocol (SNTP) Authentication Settings on a Switch through the Command Line Interface (CLI)
- Configure Simple Network Time Protocol (SNTP) Multicast/Anycast on 200/300 Series Managed Switches
- Configure Simple Network Time Protocol (SNTP) Settings on a Switch
- Configure Simple Network Time Protocol (SNTP) Unicast Server Settings on a Switch
- Configure Spanning Tree Protocol (STP) Status and Global Settings on 200/300 Series Managed Switches
- Configure Spanning Tree Protocol (STP) on a Switch
- Configure Static MAC Addresses on the 200/300 Series Managed Switches
- Configure Storm Control on the 200/300 Series Managed Switches
- Configure System Time Settings on a Switch
- Configure System Time Settings on a Switch through the Command Line Interface (CLI)
- Configure Telephony Organizationally Unique Identifier (OUI) on the 200/300 Series Managed Switches
- Configure Telephony Organizationally Unique Identifiers (OUI) Interface Settings on a Switch
- Configure Telephony Organizationally Unique Identifiers (OUI) Settings on a Switch
- Configure Time Range Settings on a Switch
- Configure Time Range Settings on a Switch through the Command Line Interface (CLI)
- Configure Transmission Control Protocol (TCP) and User Datagram Protocol (UDP) Service Settings on a Switch
- Configure User Accounts to Enhance Security on a Cisco Smart or Managed Switch
- Configure VLAN Ingress Rate Limit on the 200/300 Series Managed Switches
- Configure VLAN Interface Settings on 200/300 Managed Switches
- Configure Virtual Local Area Network (VLAN) Interface Settings on an Sx300 or Sx500 Series Switch
- Configure a VLAN Protocol-Based Group on a Switch
- Configure a VLAN on a Switch
- Configuring 802.1X on SG300 Series Switches
- Configuring a Guest Wireless Network
- Creation and Management of Secure Sensitive Data (SSD) Rules on 200/300 Series Managed Switches
- DHCP Relay Configuration on 300 Series Managed Switch
- Denial of Service (DoS) IP Fragments Filtering Configuration on 300 Series Managed Switches
- Denial of Service (DoS) Martian Address Configuration on 300 Series Managed Switches
- Denial of Service (DoS) SYN Filtering Configuration on 300 Series Managed Switches
- Dynamic Host Configuration Protocol (DHCP) Server Auto Configuration on the 200/300 Series Managed Switches
- Dynamic MAC Address Aging Time Setup on the 200/300 Series Managed Switches
- Edit a Smartport Type Macro on the 200/300 Series Managed Switches
- Egress Shaping per Queue on 200/300 Series Managed Switches
- Enable Secure Shell (SSH) Service on 300/500 Series Managed Switches
- IPv6 Interface Configuration on 200/300 Series Managed Switches
- IPv6 Neighbor Information Definition on 200/300 Series Managed Switches
- IPv6 Tunnel Configuration on 200/300 Series Managed Switches
- IPv6-Based ACL & ACE on 300 Series Managed Switches
- IPv4 Static Route Setup on the 300 Series Managed Switches
- Internet Control Message Protocol (ICMP) Filtering Configuration on the 300 Series Managed Switches
- Layer 3 InterVLAN Routing Configuration on 300 Series Managed Switch
- Link Aggregate Group (LAG) Configuration on 200/300 Series Managed Switches
- Link Layer Discovery Protocol (LLDP) Media Endpoint Discovery (MED) Network Policy Configuration on the 200/300 Series Managed Switches
- Link Layer Discovery Protocol (LLDP) Overloading on 200/300 Series Managed Switches
- Link Layer Discovery Protocol Media Endpoint Discovery (LLDP MED) Port Settings on 200/300 Series Managed Switches
- Link Layer Discovery Protocol Properties Configuration on 200/300 Series Managed Switches
- MAC Based Access Control List (ACL) and Access Control Entry (ACE) Configuration on 300 Series Managed Switches
- MAC Based Access Control List (ACL) and Access Control Entry (ACE) Configuration on 300 Series Managed Switches
- Manage Interface Statistics on a Switch
- Manage Remote Network Monitoring (RMON) Statistics on a Switch
- Manage System Logs on the 200/300 Series Managed Switches
- Manage the Link Layer Discovery Protocol (LLDP) Neighbor Information on a Switch
- Management Access Authentication on 200/300 Series Managed Switches
- Manual Configuration of Time Settings of SG200, SG300, and SG500 Series Switches
- Memory Logs on the 200/300 Series Managed Switches
- Monitor the Fan Status on 200/300 Series Managed Switches
- Multicast Properties Configuration on 200/300 Series Managed Switches
- Multicast Router Port Configuration on 200/300 Series Managed Switches
- Ping Utility on the 300 Series Managed Switches
- Ping Utility on the 200/300 Series Managed Switches
- Port Security Configuration on the 300 Series Managed Switches
- Port Security Configuration on the 200/300 Series Managed Switches
- Port and VLAN Mirroring on the 200/300 Series Managed Switches
- Prevention of ICMP Jumbo Frames on the SG200/300 Series Managed Switches
- QoS Advanced Mode Configuration on 300 Series Managed Switches
- QoS Basic Mode Configuration on 300 Series Managed Switches
- QoS Configuration through CoS Trust Mode on 200/300 Series Managed Switches
- Quality of Service (QoS) Queue Statistics on the 200/300 Series Managed Switches
- Quality of Service (QoS) with DSCP Trust Mode Configuration on the 200/300 Series Managed Switches
- Query of Internet Group Management Protocol (IGMP) / Multicast Listener Discovery (MLD) IP Multicast Group on 200/300 Series Managed Switches
- RADIUS Configuration on the 200/300 Series Managed Switches
- RADIUS Configuration with Cisco 200/300 Series Managed Switches and Windows Server 2008
- RMON Alarms Configuration on 300 Series Managed Switches
- RMON Events on 200/300 Series Managed Switches
- Rapid Spanning Tree Protocol (RSTP) Configuration on the 300 Series Managed Switches
- Rapid Spanning Tree Protocol (RSTP) Configuration on the 200/300 Series Managed Switches
- Reboot and Factory Default Reset on 300 Series Managed Switches
- Remote Network Monitoring (RMON) History Entry Configuration on 200/300 Series Managed Switches
- Reset Auto Voice Virtual Local Area Network (VLAN) Settings on a Switch
- SNTP Authentication on 300 Series Managed Switches
- SNTP Authentication on 200/300 Series Managed Switches
- SYN Rate Protection on 300 Series Managed Switches
- Security Suite Settings on 300 Series Managed Switches
- Setting System Time Dynamically from a SNTP Server for 200, 300, & 500 Series Managed Switches
- Setting Time Range on 200, 300, & 500 Series Managed Switches
- Setup Spanning Tree Protocol (STP) on a Interface on the 300 Series Managed Switches
- Setup Spanning Tree Protocol (STP) on a Interface on the 200/300 Series Managed Switches
- Simple Network Management Protocol (SNMP) Communities Configuration on 300 Series Managed Switches
- Simple Network Management Protocol (SNMP) Group Configuration on a 300 Series Managed Switch
- Simple Network Management Protocol (SNMP) Notification Filter and Notification Recipient Configuration on 300 Series Managed Switches
- Simple Network Management Protocol (SNMP) Trap Settings on the 300 Series Managed Switches
- Simple Network Management Protocol (SNMP) User Configuration on 300 Series Managed Switches
- Simple Network Management Protocol (SNMP) Views Configuration on the 300 Series Managed Switches
- Simple Network Management Protocol (SNMP) Views Configuration on the 300 Series Managed Switches
- Smartport Interface Configuration on the 200/300 Series Managed Switches
- Smartport Properties Configuration on the 300 Series Managed Switches
- Smartport Properties Configuration on the 200/300 Series Managed Switches
- Switch Interface Statistics and Diagnostics on the 200/300 Series Managed Switches
- Switches Glossary of Terms
- Switching to Layer 3 Mode on the SF/SG 300 Series Switches
- Synchronize (SYN) Filtering Configuration on the 300 Series Managed Switches
- System Information on the 300 Series Managed Switches
- System Information on the 200/300 Series Managed Switches
- System Settings Configuration on 200/300 Series Managed Switches
- System Time Configuration on the 200/300 Series Managed Switches
- TACACS+ Server Configuration on the 300 Series Managed Switches
- TCP Congestion Avoidance Configuration on 300 Series Managed Switches
- Telnetting to Cisco 300 Series Managed Switches
- VLAN Configuration on the 200/300 Series Managed Switches
- VLAN Configuration via CLI on 300/500 Series Managed Switches
- View 802.1x Extensible Authentication Protocol (EAP) Traffic Statistics on the 200/300 Series Managed Switches
- View Ternary Content Addressable Memory (TCAM) Utilization on the 300 Series Managed Switches
- Voice VLAN Configuration on the 200/300 Series Managed Switches
-
Data Sheets
- Cisco 300 Series Data Sheet (Chinese) (PDF - 916 KB)
- Cisco 300 Series Data Sheet (French) (PDF - 637 KB)
- Cisco 300 Series Data Sheet (German) (PDF - 644 KB)
- Cisco 300 Series Data Sheet (Italian) (PDF - 635 KB)
- Cisco 300 Series Data Sheet (Spanish) (PDF - 634 KB)
- Cisco 300 Series Managed Switches Data Sheet
-
End-of-Life and End-of-Sale Notices
English
- End-of-Sale and End-of-Life Announcement for the Cisco Small Business 300 Series Managed Switches (Select Models)
- End-of-Sale and End-of-Life Announcement for the Cisco Small Business 300 Series Managed Switches (Select Models)
- End-of-Sale and End-of-Life Announcement for the Cisco Small Business 300 Series Managed Switches (Select Models)
- End-of-Sale and End-of-Life Announcement for the Cisco Small Business 300 Series Managed Switches (Select Models)
French - Canadian
- Annonce d’arrêt de commercialisation et de fin de vie de Cisco Small Business 300 Series Managed Switches (Select Models)
- Annonce d’arrêt de commercialisation et de fin de vie de Commutateurs gérés de la gamme Cisco Small Business 300 (certains modèles)
- Annonce d’arrêt de commercialisation et de fin de vie de Cisco Small Business 300 Series Managed Switches (Select Models)
-
Install and Upgrade Guides
- Cisco 300 Series Managed Switches Quick Start Guide (English) (PDF - 691 KB)
- Cisco 300 Series Managed Switches Quick Start Guide (Hebrew) (PDF - 778 KB)
- Cisco Small Business 300 Series Managed Switches Quick Start Guide (PDF - 934 KB)
- Regulatory Compliance and Safety Information for the Cisco Switches (EMC Class A Devices) (PDF - 3 MB)
-
Maintain and Operate Guides
-
Release Notes
- Open Source Document for Cisco 300 Series Switches Software Version 1.4.1.x (PDF - 787 KB)
- Open Source Document for Cisco 300 Series Switches Software Version 1.4.0.x (PDF - 783 KB)
- Open Source Used In Cisco Sx300 Series Switches 1.4.9.x (PDF - 808 KB)
- Open Source Used In Sx300 Series Switches Release 1.3.7.x (PDF - 783 KB)
- Open Source Used In Sx300 Series Switches Release 1.3.5.x (PDF - 783 KB)
- Open Source Used In Sx300 Series Switches Release 1.3.0.x (PDF - 46 KB)
- Open Source Used In Sx300 Series Switches Release 1.2.9.x (PDF - 43 KB)
- Open Source Used in Cisco 300 Series Switches Release 1.4.8.x (PDF - 808 KB)
- Open Source Used in Cisco 300 Series Switches Release 1.4.5.x (PDF - 795 KB)
- Open Source Used in Cisco 300 Series Switches Release 1.4.2.x (PDF - 787 KB)
- Release Notes for 200, 300 and 500 Series Switches Software Version 1.2.9 (PDF - 76 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.4.8.6 (PDF - 132 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.4.7 (PDF - 133 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.4.7.06 (PDF - 133 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.4.5.02 (PDF - 127 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.4.2.04 (PDF - 127 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.4.1 (PDF - 125 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.4.0 (PDF - 133 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.3.7.x (PDF - 132 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.3.5.x (PDF - 131 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.3.0 (PDF - 189 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.3.0.62 (PDF - 110 KB)
- Release Notes for 200, 300, and 500 Series Switches Software Version 1.4.9.4 (PDF - 128 KB)
-
Security Advisories, Responses and Notices
Most Recent
- Multiple Vulnerabilities in OpenSSL (December 2015) Affecting Cisco Products 02-Apr-2019
- Multiple Vulnerabilities in OpenSSL (June 2015) Affecting Cisco Products 02-Apr-2019
- Cisco Small Business Switches Privileged Access Vulnerability 16-Jan-2019
- Multiple Vulnerabilities in OpenSSL Affecting Cisco Products: September 2016 02-Jan-2019
- Cisco Small Business 300 Series Managed Switches Cross-Site Scripting Vulnerability 03-Oct-2018
- Cisco Small Business 300 Series Managed Switches Authenticated Reflected Cross-Site Scripting Vulnerability 01-Aug-2018
- Cisco Small Business 300 Series Managed Switches Persistent Cross-Site Scripting Vulnerability 01-Aug-2018
- Cisco Small Business SG300 Managed Switch Web Framework GUI Function Denial of Service Vulnerability 07-Apr-2018
- Cisco Small Business 300 and 500 Series Managed Switches HTTP Response Splitting Vulnerability 07-Apr-2018
- Cisco Small Business Switches SSH Packet Processing Denial of Service Vulnerability 07-Apr-2018
- Cisco Small Business Managed Switches Denial of Service Vulnerability 07-Apr-2018
- Cisco Small Business 300 and 500 Series Managed Switches Cross-Site Scripting Vulnerability 07-Apr-2018
-
Technical References
- Rack Mounting Application Note (PDF - 905 KB)
-
Translated End-User Guides
- Cisco 300 Series Managed Switch Administration Guide 1.4.0.x (French) (PDF - 4 MB)
- Cisco 300 Series Managed Switch Administration Guide 1.4.0.x (Simplified Chinese) (PDF - 3 MB)
- Cisco 300 Series Managed Switches Administration Guide 1.4.0 (German) (PDF - 5 MB)
- Cisco 300 Series Managed Switches Administration Guide 1.4.0 (Italian) (PDF - 5 MB)
- Cisco 300 Series Managed Switches Administration Guide 1.4.0 (Spanish) (PDF - 5 MB)
- Cisco 300 Series Managed Switches Quick Start Guide (Chinese) (PDF - 843 KB)
- Cisco 300 Series Managed Switches Quick Start Guide (French) (PDF - 698 KB)
- Cisco 300 Series Managed Switches Quick Start Guide (German) (PDF - 715 KB)
- Cisco 300 Series Managed Switches Quick Start Guide (Italian) (PDF - 708 KB)
- Cisco 300 Series Managed Switches Quick Start Guide (Multilingual) (PDF - 2 MB)
- Cisco 300 Series Managed Switches Quick Start Guide (Russian) (PDF - 889 KB)
- Cisco 300 Series Managed Switches Quick Start Guide (Spanish) (PDF - 709 KB)
- Cisco 300 Series Managed Switches Quick Start Guide (Trilingual) (PDF - 1 MB)
- Cisco Small Business 300 Series Managed Switch Administration Guide 1.3.7 (Chinese) (PDF - 5 MB)
- Cisco Small Business 300 Series Managed Switch Administration Guide 1.3.7 (French) (PDF - 5 MB)
- Cisco Small Business 300 Series Managed Switch Administration Guide 1.3.7 (German) (PDF - 5 MB)
- Cisco Small Business 300 Series Managed Switch Administration Guide 1.3.7 (Italian) (PDF - 5 MB)
- Cisco Small Business 300 Series Managed Switch Administration Guide 1.3.7 (Spanish) (PDF - 5 MB)
- Cisco Small Business 300 Series Managed Switches Administration Guide 1.3.5 (Chinese) (PDF - 5 MB)
- Cisco Small Business 300 Series Managed Switches Administration Guide 1.3.5 (French) (PDF - 6 MB)
- Cisco Small Business 300 Series Managed Switches Administration Guide 1.3.5 (German) (PDF - 3 MB)
- Cisco Small Business 300 Series Managed Switches Administration Guide 1.3.5 (Italian) (PDF - 6 MB)
- Cisco Small Business 300 Series Managed Switches Administration Guide 1.3.5 (Spanish) (PDF - 5 MB)
- Cisco Small Business 300 Series Managed Switches Quick Start Guide (Japanese) (PDF - 568 KB)
- Cisco Small Business 300 Series Managed Switches Quick Start Guide (Korean) (PDF - 445 KB)
- Regulatory Compliance and Safety Information for the Cisco Small Business Switches EMC Class A Devices (French) (PDF - 6 MB)
- Release Notes for 200, 300 and 500 Series Switches Software Version 1.2.9 (French) (PDF - 107 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.3.5.x (French) (PDF - 194 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.3.0 (French) (PDF - 152 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.3.0.62 (French) (PDF - 166 KB)
- Release Notes for 200, 300, 500, and ESW2 Series Switches Software Version 1.2.9 (French) (PDF - 107 KB)
-
Troubleshooting TechNotes
- CPU Utilization on the 200/300 Series Managed Switches
- Configuring Switch as a Unicast Simple Network Time Protocol SNTP Client via CLI
- Etherlike Statistics on the 200/300 Series Managed Switches
- How to Copper Test a Port on a Switch
- How to Copper Test a Port on a Switch through the Command Line Interface (CLI)
- How to Upgrade Firmware on 200/300 Series Switches
- Manual Reset Procedure on the 200 and 300 Series Managed Switches
- SR-638771309 - US SG300-10: DHCP Auto configuration is not working
- View CPU Utilization on 300 Series Managed Switches using Command Line Interface
- View Quality of Service (QoS) Aggregate Policer Statistics on 300 Series Managed Switches
- View Quality of Service (QoS) Single Policer Statistics on 300 Series Managed Switches
-
White Papers
- Miercom Report: SMB Managed Switch Comparison (PDF - 797 KB)
- Miercom Report: SMB Managed Switch Comparison (French) (PDF - 1 MB)
- Miercom Report: SMB Managed Switch Comparison (German) (PDF - 1 MB)
- Miercom Report: SMB Managed Switch Comparison (Italian) (PDF - 1 MB)
- Miercom Report: SMB Managed Switch Comparison (Portuguese) (PDF - 1 MB)
- Miercom Report: SMB Managed Switch Comparison (Spanish) (PDF - 1 MB)
Contact Cisco
Technical Support
- Open a TAC Case Online
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
Technical Sales Questions
- Contact Us for Sales Questions
- Call 1 800 553 6387
- US/CAN | 5am - 5pm Pacific
- Other Countries
Cisco Services
-
Feedback