This document describes how to add Converged Access (5760/3850/3650) to Prime Infrastructure with Simple Network Management Protocol (SNMP) v2 and v3.
Cisco recommends that you have knowledge of these topics:
Converged Access (5760/3850/3650) Cisco IOS® Version 3.3.x and later or Denali 16.x
Prime Infrastructure Version 2.0 or later
This document is not restricted to specific software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.