The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
How do I set up a PlayStation 2 with a Cisco Small Business VoIP Router?
This article is one in a series to assist in the setup, troubleshooting, and maintenance of Cisco Small Business products.
Note: Before you proceed, note that Cisco Small Business does NOT support the configuration of PlayStationregTag;2. These instructions simply tell you how to configure the router for the PlayStationregTag;2, not the game console itself. For technical support on the PS2regTag;, contact Sony.
In order to set up a PlaystationregTag;2 on the Cisco Small Business router, complete these steps:
Set up the PlayStationregTag;2
After you install your PlayStationregTag;2 Network Adapter, connect a regular straight thru cable from one of the numbered ports on the router. Plug the other end of the cable into the PlayStationregTag;2's Network Adapters Ethernet port.
You must assign a static IP address on PlayStationregTag;2. To do that, please consult your PlayStationregTag;2 documentation, or click here. In this example "192.168.15.20" was used for the IP Address, "255.255.255.0" for the Subnet mask, "192.168.15.1" for the Default Gateway, and your DNS information.
Once the PlayStationregTag;2 is set-up, complete the steps in the next section in order to configure the Cisco Small Business router.
Configure the Router
Access the router's web-based setup page. For instructions, click here.
When the router's web-based setup page appears, click Applications and Gaming > DMZ.
Select Enabled, and enter the PlayStationregTag;2's IP address in the DMZ Host IP Address field.