This document describes upgrade procedure of Cisco Energy Management (CEM) from version 5.0 to 5.2.
There are no specific requirements for this document.
The information in this document is based on these software and hardware versions:
Cisco Energy Management Server
Cisco Energy Management Controller
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
Upgrade CEM Controller and Server from 5.0 to 5.2.
Follow these steps to upgrade CEM version from 5.0 to 5.2, before you upgrade to ensure to take last backup.