SG350XG: Configuring DAC Fails on a Switch with Pre-configured 802.1X and RADIUS Settings

Available Languages

Download Options

  • PDF     (4.0 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (50.3 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (69.0 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 10, 2018
Document ID:SMB5682

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

SG350XG: Configuring DAC Fails on a Switch with Pre-configured 802.1X and RADIUS Settings

Date Identified

August 19, 2016

Date Resolved

June 5, 2017

Product Affected

Model

Firmware Version

Fixed In

SG350XG

2.2.0.x  

2.3.0.130

Problem Description

In some cases, if a switch has preconfigured 802.1X or Remote Authentication Dial-In User Service (RADIUS) configurations through the Command Line Interface (CLI) or via the web-based utility, the display or configuration via Device Authorization Control (DAC) may fail.

Resolution

This issue is fixed when you upgrade to the firmware version 2.3.0.130. To upgrade, click here for instructions.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco