SG350XG: Show Queue Statistics Command May Display Incorrect Information

Available Languages

Download Options

  • PDF     (4.1 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (47.7 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (66.0 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:December 12, 2018
Document ID:SMB5680

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

SG350XG: Show Queue Statistics Command May Display Incorrect Information

Date Identified

May 23, 2017

Date Resolved

June 12, 2017

Product Affected

Model

Firmware Version

Fixed In

SG350XG-2F10

2.2.0.x  

2.2.0.66

SG350XG-24F

2.2.0.x  

2.2.0.66

SG350XG-24T

2.2.0.x  

2.2.0.66


Problem Description

The show queue statistics command may show incorrect information on the number of packets and bytes. This happens among SG350XG devices with less than 48 ports.

Resolution

This issue is fixed when you upgrade to the firmware version 2.2.0.66. To upgrade, click here for instructions.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco