PDF(16.0 KB) View with Adobe Reader on a variety of devices
ePub(76.3 KB) View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi (Kindle)(72.8 KB) View on Kindle device or Kindle app on multiple devices
Updated:November 13, 2018
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This document is not restricted to specific software and hardware
The information in this document was created from the devices in a
specific lab environment. All of the devices used in this document started with
a cleared (default) configuration. If your network is live, make sure that you
understand the potential impact of any command.
The WAN interface cards -1AM and -2AM (WIC-1AM and WIC-2AM) provide one
or two internal V.90 analog modems. These WICs can be used for incoming or
outgoing analog modem calls. The WIC-2AM features dual RJ-11 connectors, while
the WIC-1AM uses one port for connection to a standard telephone line, and the
other port to connect to a basic analog telephone for use when the modem is