Cisco Security Advisory
Click Icon to Copy Verbose Score
CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:C/C:N/I:N/A:L/E:X/RL:X/RC:X
-
A vulnerability in SSL/TLS certificate parsing in the Snort 2 Detection Engine of Cisco Secure Firewall Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause the Snort 2 Detection Engine to restart.
This vulnerability is due to incomplete validation of the SSL certificate. An attacker could exploit this vulnerability by sending a crafted SSL connection setup request to be parsed by Snort 2. A successful exploit could allow the attacker to cause the Snort 2 Detection Engine to restart unexpectedly, resulting in a denial of service (DoS) condition.
Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability.
This advisory is available at the following link:
https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-ftd-snort2-ssldos-Mw7WYX9cThis advisory is part of a group of advisories. For a complete list of the advisories and links to them, see Cisco Advance Notification for Publication of September 16, 2026, Security Advisories. In addition, for further documentation of improvements and fixes in Cisco Secure Firewall products, see Cisco Secure Firewall Adaptive Security Appliance Software, Secure Firewall Threat Defense Software, and Secure Firewall Management Center Software Hardening Release: September 2026.
-
Vulnerable Products
For information about which products were affected by this vulnerability at the time of publication, see the following sections.
Open Source Snort 2
At the time of publication, this vulnerability affected Open Source Snort 2.
For information about which Snort releases were vulnerable at the time of publication, see the Fixed Software section of this advisory. For more information on Snort, see the Snort website.
Cisco Secure FTD Software
At the time of publication, these vulnerabilities affected Cisco Secure FTD Software if Snort 2 was configured.
For information about which Cisco Secure FTD Software releases are vulnerable, see the Fixed Software section of this advisory.
Determine the Snort Configuration on Cisco Secure FTD Software
On new installations of Cisco Secure FTD Software releases 7.0.0 and later, Snort 3 is running by default. On devices that were running Cisco Secure FTD Software Release 6.7.0 or earlier and were upgraded to Release 7.0.0 or later, Snort 2 is running by default. Snort 2 was deprecated in Cisco Secure FTD Software releases 7.7.0 and later.
To determine which Snort version is running on Cisco Secure FTD Software, see Determine the Active Snort Version that Runs on Firepower Threat Defense (FTD).
Products Confirmed Not Vulnerable
Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.
Cisco has confirmed that this vulnerability does not affect the following products:
- Cisco Cyber Vision
- Cisco Meraki MX Security Appliances
- Cisco Secure Access Secure Internet Access (SIA) Advantage
- Cisco Secure Access Secure Private Access (SPA) Advantage
- Cisco Secure Firewall Adaptive Security Appliance (ASA) Software
- Cisco Secure Firewall Management Center (FMC) Software
- Cisco Umbrella Cloud-delivered Firewall (CDFW), formerly Umbrella Secure Internet Gateway (SIG)
- Open Source Snort 3
- Unified Threat Defense (UTD) Snort IPS Engine for Cisco IOS XE Software
- UTD Engine for Cisco IOS XE SD-WAN Software
-
There are no workarounds that address this vulnerability.
-
Cisco considers any workarounds and mitigations (if applicable) to be temporary solutions until an upgrade to a fixed software release is available. To remediate this vulnerability and avoid future exposure as described in this advisory, Cisco strongly recommends that customers upgrade to the fixed software indicated in this advisory.
Fixed Releases
For information about fixed releases, see the following sections.
Open Source Snort 2
Cisco has officially deprecated and reached End of Life for Open Source Snort 2. The final Open Source Snort 2 release was 2.9.20. Customers are advised to refer to the end-of-life notice for this product:
End of Life Announcement for versions of Snort 2
Cisco Secure Firewall ASA, Secure FMC, and Secure FTD Software
To help customers determine their exposure to vulnerabilities in Cisco Secure Firewall ASA, Secure FMC, and Secure FTD Software, Cisco provides the Cisco Software Checker. This tool identifies any Cisco security advisories that impact a specific software release and the earliest release that fixes the vulnerabilities that are described in each advisory (“First Fixed”). If applicable, the tool also returns the earliest release that fixes all the vulnerabilities that are described in all the advisories that the Software Checker identifies (“Combined First Fixed”).
To use the tool, go to the Cisco Software Checker page and follow the instructions. Alternatively, use the following form to search for vulnerabilities that affect a specific software release. To use the form, follow these steps:
- Choose which advisories the tool will search—all advisories, only advisories with a Critical or High Security Impact Rating (SIR), or only this advisory.
- Choose the appropriate software.
- Choose the appropriate platform.
- Enter a release number—for example, 9.20.3.4 for Cisco Secure Firewall ASA Software or 7.4.2 for Cisco Secure FTD Software.
- Click Check.
Additional Resources
For help determining the best Cisco Secure FTD Software release, see the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.
-
The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.
-
This vulnerability was found during the resolution of a Cisco Technical Assistance Center (TAC) support case.
-
To learn about Cisco security vulnerability disclosure policies and publications, see the Security Vulnerability Policy. This document also contains instructions for obtaining fixed software and receiving security vulnerability information from Cisco.
For additional information on Cisco's vulnerability management, disclosure cadence, and software patching strategy, see Cisco's Transition to a Risk-Based Vulnerability Disclosure Model.
-
Show LessVersion Description Section Status Date 1.0 Initial public release. — Final 2026-SEP-16
-
SOFTWARE DOWNLOADS AND TECHNICAL SUPPORT
The Cisco Support and Downloads page on Cisco.com provides information about licensing and downloads. This page can also display customer device support coverage for customers who use the My Devices tool. Please note that customers may download only software that was procured from Cisco directly or through a Cisco authorized reseller or partner and for which the license is still valid.
Customers who purchase directly from Cisco but do not hold a Cisco service contract and customers who make purchases through third-party vendors but are unsuccessful in obtaining fixed software through their point of sale should obtain upgrades by contacting the Cisco Technical Assistance Center (TAC). Customers should have the product serial number available and be prepared to provide the URL of this advisory as evidence of entitlement to a free upgrade.
When considering software upgrades, customers are advised to regularly consult the advisories for the relevant Cisco products to determine exposure and a complete upgrade solution. In all cases, customers should ensure that the devices to be upgraded contain sufficient memory and confirm that current hardware and software configurations will continue to be supported properly by the new release. If the information is not clear, customers are advised to contact the Cisco Technical Assistance Center (TAC) or their contracted maintenance providers.
LEGAL DISCLAIMER DETAILS
CISCO DOES NOT MAKE ANY EXPRESS OR IMPLIED GUARANTEES OR WARRANTIES OF ANY KIND, INCLUDING THE WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, CISCO DOES NOT GUARANTEE THE ACCURACY OR COMPLETENESS OF THIS INFORMATION. THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS. YOUR USE OF THE INFORMATION ON THE DOCUMENT OR MATERIALS LINKED FROM THE DOCUMENT IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS DOCUMENT AT ANY TIME.
Copies or summaries of the information contained in this Security Advisory may lack important information or contain factual errors. Customers are advised to visit the Cisco Security Advisories page for the most recent version of this Security Advisory. The Cisco Product Security Incident Response Team (PSIRT) assesses only the affected and fixed release information that is documented in this advisory. See the Cisco Security Vulnerability Policy for more information.