Summary

• A vulnerability in Datagram TLS (DTLS) message handling of Cisco Secure Firewall Adaptive Security Appliance (ASA) Software and Cisco Secure Firewall Threat Defense (FTD) Software for Cisco Secure Firewall 3100 Series and 4200 Series devices could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.

  This vulnerability is due to improper resource management when processing certain DTLS messages. An attacker could exploit this vulnerability by sending a crafted stream of DTLS traffic to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

  Cisco has released software updates that address this vulnerability. There are workarounds that address this vulnerability.

  This advisory is available at the following link:
  https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asaftd-dtls-dos-Kp57HkyO

  This advisory is part of a group of advisories. For a complete list of the advisories and links to them, see Cisco Advance Notification for Publication of September 16, 2026, Security Advisories. In addition, for further documentation of improvements and fixes in Cisco Secure Firewall products, see Cisco Secure Firewall Adaptive Security Appliance Software, Secure Firewall Threat Defense Software, and Secure Firewall Management Center Software Hardening Release: September 2026.

Affected Products

• Vulnerable Products

  This vulnerability affects Cisco Secure Firewall 3100 Series and 4200 Series devices if they are running a vulnerable release of Cisco Secure Firewall ASA or Secure FTD Software and have DTLS flow offload enabled. DTLS flow offload is enabled by default.

  For information about which Cisco software releases are vulnerable, see the Fixed Software section of this advisory.

  Determine Whether DTLS Flow Offload Is Enabled

  To determine whether DTLS flow offload is enabled on a Cisco Secure Firewall 3100 Series or 4200 Series device, use the show flow-offload-dtls info CLI command, as shown in the following example:

  firewall# show flow-offload-dtls info
    DTLS offload : Enabled
    Egress Optimization: Enabled

   

  Products Confirmed Not Vulnerable

  Only products listed in the Vulnerable Products section of this advisory are known to be affected by this vulnerability.

  Cisco has confirmed that this vulnerability does not affect Cisco Secure Firewall Management Center (FMC) Software.

Workarounds

• There is a workaround that addresses this vulnerability. Use the no flow-offload-dtls CLI command to disable DTLS flow offload. 

  Note: For devices that are running Cisco FTD Software, the no flow-offload-dtls command can be pushed using FlexConfig.

  Disabling DTLS flow offload will cause DTLS-encrypted traffic to be processed in software rather than hardware, which may reduce throughput and increase CPU utilization on the affected device. This impact will be more significant in deployments with a high volume of DTLS sessions.

  While this workaround has been deployed and was proven successful in a test environment, customers should determine the applicability and effectiveness in their own environment and under their own use conditions. Customers should be aware that any workaround or mitigation that is implemented may negatively impact the functionality or performance of their network based on intrinsic customer deployment scenarios and limitations. Customers should not deploy any workarounds or mitigations before first evaluating the applicability to their own environment and any impact to such environment.

Fixed Software

• Cisco considers any workarounds and mitigations (if applicable) to be temporary solutions until an upgrade to a fixed software release is available. To remediate this vulnerability and avoid future exposure as described in this advisory, Cisco strongly recommends that customers upgrade to the fixed software indicated in this advisory.

  Cisco Secure Firewall ASA, Secure FMC, and Secure FTD Software

  To help customers determine their exposure to vulnerabilities in Cisco Secure Firewall ASA, Secure FMC, and Secure FTD Software, Cisco provides the Cisco Software Checker. This tool identifies any Cisco security advisories that impact a specific software release and the earliest release that fixes the vulnerabilities that are described in each advisory (“First Fixed”). If applicable, the tool also returns the earliest release that fixes all the vulnerabilities that are described in all the advisories that the Software Checker identifies (“Combined First Fixed”).

  To use the tool, go to the Cisco Software Checker page and follow the instructions. Alternatively, use the following form to search for vulnerabilities that affect a specific software release. To use the form, follow these steps:

  1. Choose which advisories the tool will search—all advisories, only advisories with a Critical or High Security Impact Rating (SIR), or only this advisory.
  2. Choose the appropriate software.
  3. Choose the appropriate platform.
  4. Enter a release number—for example, 9.20.3.4 for Cisco Secure Firewall ASA Software or 7.4.2 for Cisco Secure FTD Software.
  5. Click Check.

  Only this advisory All Critical and High advisories All advisories Cisco ASA Software Cisco FMC Software Cisco FTD Software Any Platform 3000 Series Industrial Security Appliances (ISA) ASA 5500-X Series Firewalls ASA Service Module Adaptive Security Virtual Appliance (ASAv) Firepower 1000 Series Firepower 2100 Series Firepower 4100 Series Firepower 9000 Series Secure Firewall 1200 Series Secure Firewall 3100 Series Secure Firewall 4200 Series

   

   

  Additional Resources

  For help determining the best Cisco Secure Firewall ASA, Secure FMC, or Secure FTD Software release, see the following Recommended Releases documents. If a security advisory recommends a later release, Cisco recommends following the advisory guidance.

  Cisco Secure Firewall ASA Compatibility
  Cisco Secure Firewall ASA Upgrade Guide
  Cisco Secure Firewall Threat Defense Compatibility Guide

Exploitation and Public Announcements

• The Cisco Product Security Incident Response Team (PSIRT) is not aware of any public announcements or malicious use of the vulnerability that is described in this advisory.

Source

• This vulnerability was found during the resolution of a Cisco Technical Assistance Center (TAC) support case.

URL

• https://sec.cloudapps.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-asaftd-dtls-dos-Kp57HkyO

Revision History

• Version	Description	Section	Status	Date
  1.0	Initial public release.	—	Final	2026-SEP-16

  Show Less

---