Issue in PI3.0- Netflow data display for the Individual Sites

Available Languages

Download Options

  • PDF     (39.1 KB)
    View with Adobe Reader on a variety of devices
  • ePub     (105.4 KB)
    View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
  • Mobi (Kindle)     (100.2 KB)
    View on Kindle device or Kindle app on multiple devices
Updated:November 17, 2016
Document ID:200856

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document describes how to overcome the issue of  netflow data which is not displayed for the individual site but for the unassigned devices.

Background Information

If rules are not declared properly at Services > Application Visibility & control > Endpoint Association then you face this issue.

After declaring the same we are able to see traffic classified into corresponding site.

For Netflow data not shown for sites.

http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-0/administrator/guide/PIAdminBook/metrics.html

Procedure

Follow the procedure as shown in the image:

TAC Authored

Contributed by Cisco Engineers

  • Ajay Mishra
    Cisco TAC Engineer

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products