End-of-Sale and End-of-Life Announcement for the Cisco Catalyst 4500 FE (10/100) 48-Port RJ45 Non-E-Series PoE IEEE 802.3af Line Card
Available Languages
EOL9424 - Amended
Cisco announces the end-of-sale and end-of-life dates for the Cisco Catalyst 4500 FE (10/100) 48-Port RJ45 Non-E-Series PoE IEEE 802.3af Line Card. The last day to order the affected product(s) is April 28, 2014. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.
Table 1. End-of-Life Milestones and Dates for the Cisco Catalyst 4500 FE (10/100) 48-Port RJ45 Non-E-Series PoE IEEE 802.3af Line Card
| Milestone | Definition | Date |
| End-of-Life Announcement Date | The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. | October 28, 2013 |
| End-of-Sale Date | The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. | April 28, 2014 |
| Last Ship Date: | The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. | July 27, 2014 |
| End of SW Maintenance Releases Date: | The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software. | April 28, 2015 |
| End of Routine Failure Analysis Date: | The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect. | April 28, 2015 |
| End of New Service Attachment Date: | For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. | April 28, 2015 |
| End of Service Contract Renewal Date: | The last date to extend or renew a service contract for the product. | July 24, 2018 |
| Last Date of Support: | The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. | April 30, 2019 |
Table 2. Product Part Numbers Affected by This Announcement
| End-of-Sale Product Part Number | Product Description | Replacement Product Part Number | Replacement Product Description | Additional Information |
| WS-X4248-RJ45V | Catalyst 4500 PoE802.3af 10/100, 48-Ports (RJ45) | WS-X4748-RJ45V+E | Catalyst 4500E 48-Port PoE802.3at 10/100/1000(RJ45) | - For Cisco Catalyst 9400 information, please refer to Product Migration Options section |
| WS-X4248-RJ45V | Catalyst 4500 PoE802.3af 10/100, 48-Ports (RJ45) | WS-X4748-UPOE+E | Catalyst 4500E 48-Port UPOE 10/100/1000(RJ45) | - For Cisco Catalyst 9400 information, please refer to Product Migration Options section |
| WS-X4248-RJ45V= | Catalyst 4500 PoE802.3af 10/100, 48-Ports (RJ45) | WS-X4748-RJ45V+E= | Catalyst 4500E 48-Port PoE802.3at 10/100/1000(RJ45) | - For Cisco Catalyst 9400 information, please refer to Product Migration Options section |
| WS-X4248-RJ45V= | Catalyst 4500 PoE802.3af 10/100, 48-Ports (RJ45) | WS-X4748-UPOE+E= | Catalyst 4500E 48-Port UPOE 10/100/1000(RJ45) | - For Cisco Catalyst 9400 information, please refer to Product Migration Options section |
Product Migration Options
Customers are encouraged to migrate to the Cisco Catalyst 4500E Series 48-Port 10/100/1000 (RJ45) Line Cards. Information about this product can be found at: https://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea_ps4324_Products_Data_Sheet.html.
The Catalyst 9400 is the next generation of the industry’s most widely deployed Catalyst 4500 enterprise switching platform. Customers are encouraged to migrate to the Cisco Catalyst 9400. These modular access switches are built for security, Internet of Things (IoT), and the cloud. The platform provides unparalleled investment protection with a chassis architecture that is capable of supporting up to 9Tbps of system bandwidth and unmatched power delivery for high density IEEE 802.3BT (60W PoE). Redundancy is now table stakes across the portfolio. The Catalyst 9400 delivers state-of-the-art High Availability (HA) with capabilities like uplink resiliency, N+1/N+N redundancy for power supplies. The platform is enterprise optimized with an innovative dual-serviceable fan tray design, side to side airflow and is closet-friendly with ~16” depth. The platform also supports advanced routing and infrastructure services, SD-Access capabilities and network system virtualization. Information about this product can be found at: https://www.cisco.com/c/en/us/products/switches/catalyst-9400-series-switches/index.html”.
Customers may be able to use the Cisco Technology Migration Program (TMP) where applicable to trade-in eligible products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at: https://www.cisco.com/web/partners/incentives_and_promotions/tmp.html.
Customers may be able to continue to purchase Cisco Catalyst 4500 FE (10/100) 48-Port RJ45 Non-E-Series PoE IEEE 802.3af Line Card through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: https://www.cisco.com/go/eos.
Service prices for Cisco products are subject to change after the product End-of-Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: https://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.
For More Information
For more information about the Cisco Catalyst 4500E Series 48-Port 10/100/1000 (RJ45) Nonblocking PoE Line Card, visit https://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product_data_sheet0900aecd802109ea_ps4324_Products_Data_Sheet.html, or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to: https://www.cisco.com/en/US/products/products_end-of-life_policy.html.
For more information about the Cisco Product Warranties, go to: https://www.cisco.com/en/US/products/prod_warranties_listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: https://www.cisco.com/cisco/support/notifications.html.
Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices
To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: https://www.cisco.com/web/feeds/products/end_of_life_rss.xml.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.
Feedback