End-of-Sale and End-of-Life Announcement for the Cisco Select UCS R42610 Rack and Accessories
Available Languages
EOL11860
Cisco announces the end-of-sale and end-of-life dates for the Cisco Select UCS R42610 Rack and Accessories. The last day to order the affected product(s) is August 31, 2017. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available under the terms and conditions of customers' service contract.
Table 1. End-of-Life Milestones and Dates for the Cisco Select UCS R42610 Rack and Accessories
| Milestone |
Definition |
Date |
| End-of-Life Announcement Date |
The date the document that announces the end-of-sale and end-of-life of a product is distributed to the general public. |
June 1, 2017 |
| End-of-Sale Date: |
The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date. |
August 31, 2017 |
| Last Ship Date: |
The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time. |
November 29, 2017 |
| End of SW Maintenance Releases Date: |
The last date that Cisco Engineering may release any final software maintenance releases or bug fixes. After this date, Cisco Engineering will no longer develop, repair, maintain, or test the product software. |
August 31, 2018 |
| End of Vulnerability/Security Support: |
The last date that Cisco Engineering may release a planned maintenance release or scheduled software remedy for a security vulnerability issue. |
August 30, 2020 |
| End of Routine Failure Analysis Date: |
The last-possible date a routine failure analysis may be performed to determine the cause of hardware product failure or defect. |
August 31, 2018 |
| End of New Service Attachment Date: |
For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract. |
August 31, 2018 |
| End of Service Contract Renewal Date: |
The last date to extend or renew a service contract for the product. |
November 26, 2021 |
| Last Date of Support: |
The last date to receive applicable service and support for the product as entitled by active service contracts or by warranty terms and conditions. After this date, all support services for the product are unavailable, and the product becomes obsolete. |
August 31, 2022 |
Table 2. Product Part Numbers Affected by This Announcement
| End-of-Sale Product Part Number |
Product Description |
Replacement Product Part Number |
Replacement Product Description |
Additional Information |
| R42610-PDU-KIT |
PDU Mounting Kit for R42610 Rack |
There is currently no replacement product available for this product. |
- |
- |
| R42610-PDU-KIT= |
PDU Mounting Kit for R42610 Rack |
There is currently no replacement product available for this product. |
- |
- |
| RACK-BADGE-001 |
DO NOT PUBLISH |
There is currently no replacement product available for this product. |
- |
- |
| RACK-BADGE-001= |
Badge w/Cisco logo |
There is currently no replacement product available for this product. |
- |
- |
| RACK-BAR-001 |
DO NOT PUBLISH |
There is currently no replacement product available for this product. |
- |
- |
| RACK-BAR-001= |
Rear cable access bar |
There is currently no replacement product available for this product. |
- |
- |
| RACK-DOOR-001 |
DO NOT PUBLISH |
There is currently no replacement product available for this product. |
- |
- |
| RACK-DOOR-001= |
Front door |
RACK2-DOOR-001= |
Cisco R42612 front door |
- |
| RACK-DOOR-002 |
DO NOT PUBLISH |
There is currently no replacement product available for this product. |
- |
- |
| RACK-DOOR-002= |
Rear door (right, left) |
RACK2-DOOR-002= |
Cisco R42612 rear door (right, left) |
- |
| RACK-FOOT-001 |
DO NOT PUBLISH |
There is currently no replacement product available for this product. |
- |
- |
| RACK-FOOT-001= |
Front caster, fixed |
There is currently no replacement product available for this product. |
- |
- |
| RACK-FOOT-002 |
DO NOT PUBLISH |
There is currently no replacement product available for this product. |
- |
- |
| RACK-FOOT-002= |
Rear caster, swivel |
There is currently no replacement product available for this product. |
- |
- |
| RACK-FOOT-003 |
DO NOT PUBLISH |
There is currently no replacement product available for this product. |
- |
- |
| RACK-FOOT-003= |
Foot, leveling |
There is currently no replacement product available for this product. |
- |
- |
| RACK-HW-001 |
DO NOT PUBLISH |
There is currently no replacement product available for this product. |
- |
- |
| RACK-HW-001= |
Hardware kit |
There is currently no replacement product available for this product. |
- |
- |
| RACK-JOIN-001 |
Rack joining kit |
RACK2-JOIN-001 |
Cisco R42612 joining kit |
- |
| RACK-JOIN-001= |
Rack joining kit |
RACK2-JOIN-001= |
Cisco R42612 joining kit |
- |
| RACK-LOCK-001 |
DO NOT PUBLISH |
There is currently no replacement product available for this product. |
- |
- |
| RACK-LOCK-001= |
Door latch |
There is currently no replacement product available for this product. |
- |
- |
| RACK-SIDE-001 |
DO NOT PUBLISH |
There is currently no replacement product available for this product. |
- |
- |
| RACK-SIDE-001= |
Side panel, set of 1 (top, bottom) |
RACK2-SIDE-001= |
Cisco R42612 side panel, set of 1 (top, bottom) |
- |
| RACK-STABLE-001 |
Rack stabilizer kit |
There is currently no replacement product available for this product. |
- |
- |
| RACK-STABLE-001= |
Rack stabilizer kit |
There is currently no replacement product available for this product. |
- |
- |
| RACK-UCS |
Cisco R42610 expansion rack, no side panels |
RACK2-UCS |
Cisco R42612 expansion rack, no side panels |
- |
| RACK-UCS2 |
Cisco R42610 standard rack, w/side panels |
RACK2-UCS2 |
Cisco R42612 standard rack, w/side panels |
- |
| RACK-UCS2-INT |
Cisco R42610 dynamic rack, w/side panels |
RACK2-UCS2-INT |
Cisco R42612 dynamic rack, w/side panels |
- |
| RP208-30-1P-U-1 |
Cisco RP208-30-U-1 Single Phase PDU 2x C13, 4x C19 |
RP208-30M1P-4-8, RP208-60M3P-12, RP208-60M3P-12-9 |
24A Metered Input 1-Phase 4x C19, 8x C13 - 1U Mount PDU, 48A Metered Input 3-Phase 12x C19 - 2U Mount PDU, 48A Metered Input 3-Phase 12x C19, 9x C13 - 0U PDU |
- |
| RP208-30-1P-U-1= |
Cisco RP208-30-U-1 Single Phase PDU 2x C13, 4x C19 |
RP208-30M1P-4-8=, RP208-60M3P-12=, RP208-60M3P-12-9= |
24A Metered Input 1-Phase 4x C19, 8x C13 - 1U Mount PDU, 48A Metered Input 3-Phase 12x C19 - 2U Mount PDU, 48A Metered Input 3-Phase 12x C19, 9x C13 - 0U PDU |
- |
| RP208-30-1P-U-2 |
Cisco RP208-30-U-2 Single Phase PDU 20x C13, 4x C19 |
RP208-30M1P-6-36, RP208-30M3P-6-30, RP208-60M3P-12-9 |
24A Metered Input 1-Phase 6x C19, 36x C13 - 0U PDU, 24A Metered Input 3-Phase 6x C19, 30x C13 - 0U PDU, 48A Metered Input 3-Phase 12x C19, 9x C13 - 0U PDU |
- |
| RP208-30-1P-U-2= |
Cisco RP208-30-U-2 Single Phase PDU 20x C13, 4x C19 |
RP208-30M1P-6-36=, RP208-30M3P-6-30=, RP208-60M3P-12-9= |
24A Metered Input 1-Phase 6x C19, 36x C13 - 0U PDU, 24A Metered Input 3-Phase 6x C19, 30x C13 - 0U PDU, 48A Metered Input 3-Phase 12x C19, 9x C13 - 0U PDU |
- |
| RP230-32-1P-U-1 |
Cisco RP230-32-U-1 Single Phase PDU 2x C13, 4x C19 |
RP230-32M3P-12-12 |
32A Metered Input 3-Phase 12x C19, 12x C13 - 0U PDU |
- |
| RP230-32-1P-U-1= |
Cisco RP230-32-U-1 Single Phase PDU 2x C13, 4x C19 |
RP230-32M3P-12-12= |
32A Metered Input 3-Phase 12x C19, 12x C13 - 0U PDU |
- |
| RP230-32-1P-U-2 |
Cisco RP230-32-U-2 Single Phase PDU 20x C13, 4x C19 |
RP230-32M1P-6-36 |
32A Metered Input 1-Phase 6x C19, 36x C13 - 0U PDU |
- |
| RP230-32-1P-U-2= |
Cisco RP230-32-U-2 Single Phase PDU 20x C13, 4x C19 |
RP230-32M1P-6-36= |
32A Metered Input 1-Phase 6x C19, 36x C13 - 0U PDU |
- |
Product Migration Options
Service prices for Cisco products are subject to change after the product End-of-Sale date.
The Cisco Takeback and Recycle program helps businesses properly dispose of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html.
For More Information
For more information about the Cisco End-of-Life Policy, go to: http://www.cisco.com/en/US/products/products_end-of-life_policy.html.
For more information about the Cisco Product Warranties, go to: http://www.cisco.com/en/US/products/prod_warranties_listing.html.
To subscribe to receive end-of-life/end-of-sale information, go to: http://www.cisco.com/cisco/support/notifications.html.
Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices
To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml.
Any authorized translation issued by Cisco Systems or affiliates of this end-of-life Product Bulletin is intended to help customers understand the content described in the English version. This translation is the result of a commercially reasonable effort; however, if there are discrepancies between the English version and the translated document, please refer to the English version, which is considered authoritative.
Feedback