End-of-Sale and End-of-Life Announcement for the Cisco CRS-1 Series OC-48 and OC-192 POS/DPT Physical Layer Interface Module

Available Languages

Download Options

  • PDF     (180.0 KB)
    View with Adobe Reader on a variety of devices
Updated:December 23, 2013
Document ID:1458423820564197

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

EOL6867

Cisco announces the end-of-sale and end-of life dates for the Cisco CRS-1 Series OC-48 and OC-192 POS/DPT Physical Layer Interface Module. The last day to order the affected product(s) is March 26, 2010. Customers with active service contracts will continue to receive support from the Cisco Technical Assistance Center (TAC) as shown in Table 1 of the EoL bulletin. Table 1 describes the end-of-life milestones, definitions, and dates for the affected product(s). Table 2 lists the product part numbers affected by this announcement. For customers with active and paid service and support contracts, support will be available until the termination date of the contract, even if this date exceeds the Last Date of Support shown in Table 1.

Table 1. End-of-Life Milestones and Dates for the Cisco CRS-1 Series OC-48 and OC-192 POS/DPT Physical Layer Interface Module

Milestone

Definition

Date

End-of-Life Announcement Date

The date the document that announces the end of sale and end of life of a product is distributed to the general public.

September 25, 2009

End-of-Sale Date

The last date to order the product through Cisco point-of-sale mechanisms. The product is no longer for sale after this date.

March 26, 2010

Last Ship Date: HW

The last-possible ship date that can be requested of Cisco and/or its contract manufacturers. Actual ship date is dependent on lead time.

June 24, 2010

End of Routine Failure Analysis Date: HW

The last-possible date a routine failure analysis may be performed to determine the cause of product failure or defect.

March 26, 2011

End of New Service Attachment Date: HW

For equipment and software that is not covered by a service-and-support contract, this is the last date to order a new service-and-support contract or add the equipment and/or software to an existing service-and-support contract.

March 26, 2011

End of Service Contract Renewal Date: HW

The last date to extend or renew a service contract for the product.

June 21, 2014

Last Date of Support: HW

The last date to receive service and support for the product. After this date, all support services for the product are unavailable, and the product becomes obsolete.

March 25, 2015


HW = Hardware OS SW = Operating System Software App. SW = Application Software

Table 2. Product Part Numbers Affected by This Announcement

End-of-Sale Product Part Number

Product Description

Replacement Product Part Number

Replacement Product Description

Additional Information

16OC48-POS-LR2-SK

16 Port OC48 Long Reach Optics for Starter Kit

SPA-4XOC48POS/RPR

4-port OC48/STM16 POS/RPR Shared Port Adapters

-

16OC48-POS/DPT

Cisco CRS-1 Series 16xOC48/STM16 POS/DPT Interface Module

SPA-4XOC48POS/RPR

4-port OC48/STM16 POS/RPR Shared Port Adapters

-

16OC48-POS/DPT-LR

Cisco CRS-1 Series 16xOC48/STM16 POS/DPT Interface Module/LR

SPA-4XOC48POS/RPR

4-port OC48/STM16 POS/RPR Shared Port Adapters

-

16OC48-POS/DPT-LR=

Cisco CRS-1 Series 16xOC48/STM16 POS/DPT Interface Module/LR

SPA-4XOC48POS/RPR

4-port OC48/STM16 POS/RPR Shared Port Adapters

-

16OC48-POS/DPT=

Cisco CRS-1 Series 16xOC48/STM16 POS/DPT Interface Module

SPA-4XOC48POS/RPR

4-port OC48/STM16 POS/RPR Shared Port Adapters

-

1OC192-POS-IR-UP=

CRS-1 Series 1xOC192/STM64 POS Interface Module/IR Upgrade

SPA-OC192POS-XFP

1-port OC192/STM64 POS/RPR XFP Optics

-

1OC192-POS-IR=

CRS-1 Series 1xOC192/STM64 POS Interface Module/IR

SPA-OC192POS-XFP

1-port OC192/STM64 POS/RPR XFP Optics

-

1OC192-POS-LR-UP=

CRS-1 Series 1xOC192/STM64 POS Interface Module/LR Upgrade

SPA-OC192POS-XFP

1-port OC192/STM64 POS/RPR XFP Optics

-

1OC192-POS-LR=

CRS-1 Series 1xOC192/STM64 POS Interface Module/LR

SPA-OC192POS-XFP

1-port OC192/STM64 POS/RPR XFP Optics

-

1OC192-POS-SR-UP=

CRS-1 Series 1xOC192/STM64 POS Interface Module/SR Upgrade

SPA-OC192POS-XFP

1-port OC192/STM64 POS/RPR XFP Optics

-

1OC192-POS-SR=

CRS-1 Series 1xOC192/STM64 POS Interface Module/SR

SPA-OC192POS-XFP

1-port OC192/STM64 POS/RPR XFP Optics

-

1OC192-POS-VS-UP=

CRS-1 Series 1xOC192/STM64 POS Interface Module/VS Upgrade

SPA-OC192POS-VSR

1-port OC192/STM64 POS/RPR VSR Optics

-

1OC192-POS-VS=

CRS-1 Series 1xOC192/STM64 POS Interface Module/VS

SPA-OC192POS-VSR

1-port OC192/STM64 POS/RPR VSR Optics

-

4OC192-DPT-SR=

Cisco CRS-1 Series 4xOC192/STM64 DPT Interface Module/SR

SPA-OC192POS-XFP

1-port OC192/STM64 POS/RPR XFP Optics

-

4OC192-POS-IR-SK

4 Port OC192 Intermediate ReachOptics for Starter Kit

SPA-OC192POS-XFP

1-port OC192/STM64 POS/RPR XFP Optics

-

4OC192-POS-LR-SK

4 Port OC192 Long Reach Optics for Starter Kit

SPA-OC192POS-XFP

1-port OC192/STM64 POS/RPR XFP Optics

-

4OC192-POS-SR-SK

4 Port OC192 Short ReachOptics for Starter Kit

SPA-OC192POS-XFP

1-port OC192/STM64 POS/RPR XFP Optics

-

4OC192-POS-VS-SK

4 Port OC192 Very Short Optics for Starter Kit

SPA-OC192POS-VSR

1-port OC192/STM64 POS/RPR VSR Optics

-

4OC192-POS/DPT-IR

Cisco CRS-1 Series 4xOC192/STM64 POS/DPT Interface Module/IR

SPA-OC192POS-XFP

1-port OC192/STM64 POS/RPR XFP Optics

-

4OC192-POS/DPT-IR=

Cisco CRS-1 Series 4xOC192/STM64 POS/DPT Interface Module/IR

SPA-OC192POS-XFP

1-port OC192/STM64 POS/RPR XFP Optics

-

4OC192-POS/DPT-LR

Cisco CRS-1 Series 4xOC192/STM64 POS/DPT Interface Module/LR

SPA-OC192POS-XFP

1-port OC192/STM64 POS/RPR XFP Optics

-

4OC192-POS/DPT-LR=

Cisco CRS-1 Series 4xOC192/STM64 POS/DPT Interface Module/LR

SPA-OC192POS-XFP

1-port OC192/STM64 POS/RPR XFP Optics

-

4OC192-POS/DPT-SR

Cisco CRS-1 Series 4xOC192/STM64 POS/DPT Interface Module/SR

SPA-OC192POS-XFP

1-port OC192/STM64 POS/RPR XFP Optics

-

4OC192-POS/DPT-SR=

Cisco CRS-1 Series 4xOC192/STM64 POS/DPT Interface Module/SR

SPA-OC192POS-XFP

1-port OC192/STM64 POS/RPR XFP Optics

-

4OC192-POS/DPT-VS

Cisco CRS-1 Series 4xOC192/STM64 POS/DPT Interface Module/VS

SPA-OC192POS-VSR

1-port OC192/STM64 POS/RPR VSR Optics

-

4OC192-POS/DPT-VS=

Cisco CRS-1 Series 4xOC192/STM64 POS/DPT Interface Module/VS

SPA-OC192POS-VSR

1-port OC192/STM64 POS/RPR VSR Optics

-

Product Migration Options

Customers are encouraged to migrate to the Cisco 4-port OC-48/STM16 or 1-port OC-192/STM64 shared port adapter (SPA) or SPA interface processor. Information about these products can be found at: http://www.cisco.com/en/US/products/ps5763/products_data_sheets_list.html.
Customers can use the Cisco Technology Migration Program (TMP) to trade-in products and receive credit toward the purchase of new Cisco equipment. For more information about Cisco TMP, customers should work with their Cisco Partner or Cisco account team. Cisco Partners can find additional TMP information on Partner Central at http://www.cisco.com/web/partners/pr11/incentive/tmp/index.html
Customers may be able to continue to purchase the Cisco CRS-1 Series OC-48 and OC-192 POS/DPT Physical Layer Interface Module through the Cisco Certified Refurbished Equipment program. Refurbished units may be available in limited supply for sale in certain countries on a first-come, first-served basis until the Last Date of Support has been reached. For information about the Cisco Certified Refurbished Equipment program, go to: www.cisco.com/go/eos
Service prices for Cisco products are subject to change after the product End of Sale date.
The Cisco Takeback and Recycle program helps businesses dispose properly of surplus products that have reached their end of useful life. The program is open to all business users of Cisco equipment and its associated brands and subsidiaries. For more information, go to: http://www.cisco.com/web/about/ac227/ac228/ac231/about_cisco_takeback_recycling.html

For More Information

For more information about the Cisco 4-Port OC-48/STM16 or 1-Port OC-192/STM64 Shared Port Adapter or SPA Interface Processor, visit http://www.cisco.com/en/US/products/ps5763/products_data_sheets_list.html, or contact your local account representative.
For more information about the Cisco End-of-Life Policy, go to:
http://www.cisco.com/en/US/products/prod_end_of_life.html
To subscribe to receive end-of-life/end-of-sale information, go to:
http://www.cisco.com/cisco/support/notifications.html

Subscribe for RSS Notifications for End-of-Life and End-of-Sale Notices

To subscribe to the End-of-Life and End-of-Sale RSS Feed, insert the following URL into your RSS application: http://www.cisco.com/web/feeds/products/end_of_life_rss.xml

Contact Cisco

  • Get a call from Sales
  • Call Sales:
  • 1-800-553-6387
  • US/CAN | 5am-5pm PT
  • Product / Technical Support
  • Training & Certification

Was this Document Helpful?

FeedbackFeedback
Hello, how can I help?
Ask Cisco
Expand the window to see more details and enjoy a clearer chat!

Results generated by AI. Before using results, verify accuracy and completeness.