Revised June 2, 2008
October 7, 2002
THIS FIELD NOTICE HAS BEEN EXPIRED AND IS NO LONGER MAINTAINED OR UPDATED BY CISCO.
THIS FIELD NOTICE IS PROVIDED ON AN "AS IS" BASIS AND DOES NOT IMPLY ANY KIND OF GUARANTEE, WARRANTY OR SUPPORT. USE OF THE INFORMATION ON THIS FIELD NOTICE OR MATERIALS LINKED FROM THIS FIELD NOTICE IS AT YOUR OWN RISK. CISCO RESERVES THE RIGHT TO CHANGE OR UPDATE THIS FIELD NOTICE AT ANY TIME.
15454-XC-VT boards with a serial number of SAG0621XXX and earlier have a mismatch between the CLEI label and machine readable data.
Boards with serial numbers of SAG0622XXXX and later are not affected by this issue. For example: SAG0622XXXX [Year (06) = 2002, (04) = 2000, and Week (22) = 22nd week of the year].
Any board manufactured after the 21st week of 2002 is not affected by this issue.
A data entry error was responsible for a mismatch between Telcordia data and the Cisco CLEI database. The CLEI label consists of two portions, a human readable portion that shows the CLEI code, and a bar coded portion that reflects the ECI number. OTBU products typically use a split label, so that the human readable portion and bar-coded portions of the label are placed in separate areas on the faceplate. It has been determined that, while the CLEI code was incorrect, the ECI number (the bar-coded portion) does match the Telcordia records.
Note: There are three distinct components involved in the CLEI information data.
- Human readable CLEI label
- Bar code label
- Machine readable memory contents
The CLEI label and machine readable data content do not reflect the correct CLEI code information. This issue will only affect those customers using these forms of identification to track their hardware. The bar code label does match the Telcordia CLEI data base information.
Unless the above-mentioned forms of CLEI identification are used within your organization, you are not affected by this issue, and need take no further action.
If, your organization does rely on the CLEI label and/or the machine readable CLEI data, and your board has a serial number in the affected range, please contact the Technical Assistance Center as outlined below to obtain a replacement human readable label for the front panel.[an error occurred while processing this directive]
|1.3||02-JUN-2008||Expired field notice|
|1.2||02-MAR-2006||Removed Umpire Form|
|1.0||10-OCT-2002||Initial Public Release|
For More Information
If you require further assistance, or if you have any further questions regarding this field notice, please contact the Cisco Systems Technical Assistance Center (TAC) by one of the following methods:
Receive Email Notification For New Field Notices
Product Alert Tool - Set up a profile to receive email updates about reliability, safety, network security, and end-of-sale issues for the Cisco products you specify.