 Feedback
|
Table Of Contents
What's New in Cisco Product Documentation
Application Networking Services
Server Networking and Virtualization
Universal Gateways and Access Servers
Video, Cable, and Content Delivery
Voice and Unified Communications
Obtaining Additional Information
What's New in Cisco Product Documentation
January 2009
What's New in Cisco Product Documentation lists new and revised Cisco documentation since the last release of this monthly publication. To subscribe to the What's New in Cisco Product Documentation RSS feed, paste the following URL into your RSS reader:
http://www.cisco.com/cdc_content_elements/rss/whats_new/whatsnew_rss_feed.xml
Previous releases of the What's New in Cisco Product Documentation are available at the following URL:
http://www.cisco.com/en/US/docs/general/whatsnew/archive/archive.html
Recent Linksys Document Migration
Software downloads for Cisco Small Business Products (formerly Linksys Business Series) are now available at the Cisco Software Center.
Also Available: More than 600 Q&A articles to assist in the setup, troubleshooting, and maintenance of Cisco Small Business (formerly Linksys Business Series) Products.
View a representative sample Q&A article today.
Coming Soon! New Edition of the Cisco Product Quick Reference Guide
The February 2009 edition of the Cisco Product Quick Reference Guide will be released on February 16, 2009. You can pre-order the guide beginning January 19, 2009 at:
Application Networking Services
Revised Documents
•
Release Note for the Cisco Application Control Engine Module (Software Version A2(X))
Describes the resolved and open caveats, and CLI command changes for software version A2(1.3) of the ACE module.
Cisco Interfaces and Modules
New Documents
•
Describes a single-width, double-height, cross-platform optical carrier (OC) ATM adapter card that provides OC-12c/STM-4c (622.080 Mbps) connectivity and can be used in a Catalyst 6500 series switch.
•
Describes a single-width, double-height, cross-platform optical carrier (OC) ATM adapter card that provides OC-48c/STM-16 (2488 Mbps) connectivity and can be used in a Catalyst 6500 series switch.
Describes a single-width, double-height, cross-platform optical carrier (OC) ATM adapter card that provides OC-48c/STM-16 (2488 Mbps) Packet over SONET (POS) connectivity and can be used in a Catalyst 6500 series switch.
•
Describes single-width, double-height, cross-platform optical carrier (OC) ATM adapter cards that provides OC-3c/STM-1c (155.52 Mbps) connectivity and can be used in a Catalyst 6500 series switch.
Encapsulates Multiprotocol Label Switching (MPLS) packets inside IP tunnels, creating a virtual point-to-point link across non-MPLS networks.
Introduces IPv6 support for the Virtual Private Network (VPN) services port adapter (VSPA).
•
Extends support to T1/E1and T3/E3 shared port adapters (SPAs) for the SIP400 WAN card.
Helps enable high-performance IP security (IPSec) Virtual Private Network (VPN) services for data across a network.
•
Provides a routable interface type for terminating IPsec tunnels that simplifies the configuration process when you need to provide protection for remote access, and provides a simpler alternative to using generic routing encapsulation (GRE) tunnels and crypto maps with IPsec.
•
Provides IP security (IPsec) encryption and decryption, generic routing encapsulation (GRE), and Internet Key Exchange (IKE) key generation.
Revised Documents
•
Provides distributed forwarding with application-specific integrated circuit (ASIC) technology in the forwarding path (routing and switching, NetFlow, access control lists [ACLs]) and for queuing and shaping functions to provide the maximum performance for these features.
•
Provides operational management of link uptime.
Cisco IOS Software
New Documents
Provides e-mail-based and web-based notification of critical system events.
•
Provides a per-port configurable option that moves a port into a blocking state when an Operation, Administration, and Maintenance (OAM) protocol data unit (PDU) control request packet is received with the link fault status flag set.
•
Allows the router to keep from receiving multicast traffic from unauthenticated groups or unauthorized channels.
•
Allows you to gather NetFlow statistics on traffic that is transmitted over a generic routing encapsulation (GRE) IP tunnel interface.
•
Enhances multicast high availability (HA) functionality by providing support for the synchronization of dynamically learned group-to-rendezvous point (RP) mappings and bidirectional Protocol Independent Manager (bidir-PIM) designated forwarder (DF) information on the standby Route Processor (RP).
Revised Documents
•
Enhances the Per Interface Mroute State Limit feature by implementing a way to count per interface mroute state limiters using cost multipliers (referred to as bandwidth-based multicast call admission control [CAC] policies).
•
Introduces support for continue clauses to be applied to outbound route maps.
Implements the second phase of end-to-end connectivity fault management (CFM) for Ethernet networks.
Provide detailed information on platform-independent Cisco IOS commands; specifically, on command syntax, defaults, command modes, command history, usage guidelines, and examples.
•
Contain Cisco IOS features that are shared across releases and platforms and grouped by technology areas.
•
Assists configuration management by enabling faster collection of running configuration file information.
Provides modularization ("partitioning") of the running configuration state to provide granular access to the running configuration in Cisco IOS software.
•
Enables a rollback to occur if confirmation of a requested changes is not received within a configured time frame.
•
Manages link, subnet, and site addressing changes.
•
Adds the remote identification (remote-ID) option to relayed (RELAY-FORWARD) Dynamic Host Configuration Protocol (DHCP)v6 packets.
•
Introduces persistency for the interface-identifier option after a configuration change or a router reload.
Allows you to create two levels of priority queues within a single policy map.
•
Enables an increase in network availability and reduces the downtime caused by software upgrades.
•
Integrates Enhanced Object Tracking (EOT) with Embedded Event Manager (EEM) to allow EEM to report on a status change of a tracked object and to allow EOT to track EEM objects.
•
Describes an Ethernet layer Operation, Administration, and Management (OAM) protocol that provides information to enable auto configuration of customer edge (CE) devices and the status of Ethernet virtual connections (EVCs) for large Ethernet metropolitan-area networks (MANs) and WANs.
•
Enables Ethernet Operation, Administration, and Maintenance (OAM) and Connectivity Fault Management (CFM) to function together in a network.
Contains information about network hosts that are using a Gateway Load Balancing Protocol (GLBP) group as the default gateway.
Provides automatic router backup for IPv6 hosts configured with a single default gateway on an IEEE 802.3 LAN.
Allows for transparent failover of the first-hop IPv6 router.
Configures Hot Standby Router Protocol (HSRP) to check that the entries in the Address Resolution Protocol (ARP) cache are correct and to send periodic gratuitous ARP packets from one or more HSRP active groups.
Enables you to configure a Hot Standby Router Protocol (HSRP) group to become disabled (its state changed to Init) instead of having its priority decremented when a tracked object goes down.
•
Improves the negotiation and maintenance of multiple Hot Standby Router Protocol (HSRP) groups configured on a subinterface.
•
Describes a Dynamic Host Configuration Protocol (DHCP) relay agent, which may reside on the client's link, and is used to relay messages between the client and the server.
•
Allows you to configure IPv6 access list entries matching Mobile-IPv6-specific Internet Control Message Protocol (ICMP) messages to match packets containing Mobile IPv6 extension headers.
Allows you to configure Enhanced Interior Gateway Routing Protocol (EIGRP) to route IPv6 prefixes.
Allows Internet service providers (ISPs) to offer IPv6 Virtual Private Network (VPN) services to their customers.
Enables you to configure your network to detect a failure in the network and reroute the Layer 2 (L2) service to another endpoint that can continue to provide service.
•
Provides the means to discover all possible equal-cost multipath (ECMP) routing paths of a label switched path (LSP) between an egress and ingress router.
•
Helps service providers monitor label switched paths (LSPs) and quickly isolate Multiprotocol Label Switching (MPLS) forwarding problems.
•
Allows you to use IPv4 generic routing encapsulation (GRE) tunnels to provide IPv6 Virtual Private Network (VPN) over Multiprotocol Label Switching (MPLS) functionality to reach the Border Gateway Protocol (BGP) next hop.
•
Describes how to configure a Virtual Private Network (VPN) routing and forwarding (VRF) instance for IPv4 and IPv6 VPNs and how to upgrade your existing single-protocol IPv4-only VRF to a multiprotocol VRF configuration.
•
Introduces a policy-based routing (PBR) mechanism to classify and forward Virtual Private Network (VPN) traffic based on multiple VPN routing and forwarding (VRF) selection match criteria.
•
Provides the capability to limit the number of mroute states on an interface for different access control list (ACL)-classified sets of multicast traffic.
Provides the ability to apply quality of service (QoS) features (such as traffic classification, shaping, queueing, and policing) on a per-session basis.
Adds stateful switchover (SSO) support to Virtual Router Redundancy Protocol (VRRP), which is an election protocol that dynamically assigns responsibility for one or more virtual routers to the VRRP routers on a LAN, allowing several routers on a multiaccess link to use the same virtual IP address.
Cisco NX-OS Software
New Documents
•
Describes the fundamental commands for Cisco NX-OS Release 4.1(2).
•
Describes the security commands for Cisco NX-OS Release 4.1(2), including new features such as IPv6 ACLs and Public Key Infrastructure (PKI) support.
•
Describes the security configuration information for Cisco NX-OS Release 4.1(2), including new features such as IPv6 ACLs and Public Key Infrastructure (PKI) support.
•
Describes the software upgrade and downgrade information for Cisco NX-OS Release 4.1(2), including compatibility with earlier Cisco NX-OS releases.
•
Describes the VDC commands for Cisco NX-OS Release 4.1(2).
•
Describes the VDC configuration information for Cisco NX-OS Release 4.1(2).
Revised Documents
•
Provides a brief summary of new features for Cisco DCNM Release 4.1(2) and lists open and resolved caveats for this release.
•
Describes how to use the CMP.
•
Lists the documents in the Cisco Nexus 7000, Cisco NX-OS, and Cisco DCNM Release 4.1(2).
•
Provides a brief summary of the new FPGA/EPLDs for Release 4.1(2) and lists open and resolved caveats for this release.
•
Describes how to install a Cisco Nexus 7000 Series device.
•
Lists the documentation warnings and their translations.
•
Describes how to prepare a facility before installing a Cisco Nexus 7000 series device.
•
Provides a listing of the documented Cisco NX-OS commands in alphabetical order.
•
Describes the interfaces configuration commands for Cisco NX-OS Release 4.1(2).
•
Describes the interfaces configuration information for Cisco NX-OS Release 4.1(2).
•
Describes the Layer 2 switching commands for Cisco NX-OS Release 4.1(2).
•
Describes the Layer 2 configuration information for Cisco NX-OS Release 4.1(2).
•
Describes the QoS commands for Cisco NX-OS Release 4.1(2).
•
Describes the multicast routing commands for Cisco NX-OS Release 4.1(2).
•
Describes the multicast routing configuration information for Cisco NX-OS Release 4.1(2).
•
Describes the Cisco NX-OS system messages for the Nexus 5000 series and Nexus 7000 series products.
•
Describes the unicast routing commands for Cisco NX-OS Release 4.1(2), including new features such as IPv6 for EIGRP and object tracking support.
•
Describes the unicast routing configuration information for Cisco NX-OS Release 4.1(2), including new features such as IPv6 for EIGRP and object tracking support.
•
Describes the XML management interface for Cisco NX-OS Release 4.1(2).
Interoperability Systems
None at this time.
Network Management
New Documents
Enables monitoring of the backplane or fabric channel traffic utilization at a configured interval and generates a syslog message when a programmable threshold is crossed.
•
Sends a Cisco Discovery Protocol (CDP) message containing a host presence type, length, values (TLV) indicating the changed state of the IP phone's access port link to the switch.
•
Describes the security configuration information for Cisco DCNM Release 4.1(2), including IPv6 ACL support.
•
Describes the VDC configuration information for Cisco DCNM Release 4.1(2).
Revised Documents
•
Implements the alarm filter profile capability defined in the CISCO-ENTITY-ALARM-MIB.
•
Describes the fundamental configuration information for Cisco DCNM Release 4.1(2).
•
Describes the interfaces configuration information for Cisco DCNM Release 4.1(2).
•
Describes the Layer 2 configuration information for Cisco DCNM Release 4.1(2).
•
Describes the unicast routing configuration information for Cisco DCNM Release 4.1(2), including new features such as HSRP support.
•
Describes the API services available for Cisco DCNM Release 4.1(2).
•
Describes a collection of services that can provide remote event-driven configuring of Cisco IOS networking devices and remote execution of some command-line interface (CLI) commands.
Assists in the initial configuration and subsequent partial configurations on a Cisco IOS device.
Describes the Cisco IOS infrastructure that allows Cisco IOS applications to publish and subscribe to events on a Cisco network services (CNS) event bus.
Enables the managed device to initiate a network connection and request an image download allowing devices using Network Address Translation (NAT), or behind firewalls, to access the image server.
Provides an XML interface that allows you to send interactive commands, such as those that generate prompts for user input, to a router.
•
Allows you to schedule fully qualified EXEC mode CLI commands to run once, at specified intervals, at specified calendar dates and times, or upon system startup.
Introduces new actions and event detectors and enhancements.
Provides a programmable framework that allows you to filter, escalate, correlate, route, and customize system logging messages prior to delivery by the Cisco IOS system message logger.
Supports polling of Remote Monitoring (RMON) variables up to 64 bit values.
Provides the capability to gather Ethernet layer network performance metrics.
Provides the capability to schedule multiple IP service level agreement (SLA) operations to begin at random intervals uniformly distributed over a specified duration of time and to restart at uniformly distributed random frequencies within a specified frequency range.
•
Allows you to enable either the NETCONF server or the NETCONF client to initiate a connection, thus supporting large networks of intermittently connected devices and those devices that must reverse the management connection where there are firewalls and network address translators (NATs).
Enables you to perform network configurations via the Cisco command-line interface (CLI) over an encrypted transport.
•
Allows you to customize a device for receipt of syslog messages.
Describes how to configure Simple Network Management Protocol (SNMP) over an IPv6 transport so that an IPv6 host can perform SNMP queries and receive SNMP notifications from a device running Cisco IOS IPv6.
•
Provides triple data encryption standard (3DES) and advanced encryption standard (AES) for message encryption.
Allows you to log syslog messages to external syslog servers and hosts with IPv6 addresses.
Optical Networking
The terms "Unidirectional Path Switched Ring" and "UPSR" may appear in Cisco literature. These terms do not refer to using Cisco ONS 15xxx products in a unidirectional path switched ring configuration. Rather, these terms, and "Path Protected Mesh Network" and "PPMN," refer generally to Cisco's path protection feature, which may be used in any topological network configuration. Cisco does not recommend using its path protection feature in any particular topological network configuration.
Routers
New Documents
Provides the end-user instructions to deploy the Cisco Virtual Office (CVO) for home or small office use.
•
Provides the end-user instructions to deploy the Cisco Virtual Office (CVO) for home or small office use.
Revised Documents
•
Provides late-breaking and cumulative release, upgrade, and installation information for release 4.5.
•
Provides late-breaking and cumulative release and upgrade information for Cisco NAC Profiler Release 2.1.8 (build 37).
Security
New Documents
•
Contains up-to-date troubleshooting information and frequently asked questions. This information is generated by customer queries and developer input.
•
Identifies and links to installation and setup information for Cisco Security Manager 3.2.2 (Security Manager 3.2.2) and Auto Update Server 3.2.2 (AUS 3.2.2).
•
Uses an external audit server to check the antivirus posture of clients that do not run a Cisco Trust Agent (CTA) and cannot respond to Network Admission Control (NAC) queries.
•
Provides a means of assigning authentication methods to ports and specifying the order in which the methods are executed when an authentication attempt fails.
•
Allows one 802.1X/MAC authentication bypass (MAB) client on the voice VLAN and multiple authenticated 802.1X/MAB/webauth clients on the data VLAN.
•
Allows you to have limited network access (defined by a static access control list [ACL] on the user-facing ports) without having to go through 802.1x authentication.
•
Allows you to associate a user-defined description with an interface after a successful authentication of the host by 802.1X or MAC authentication bypass (MAB) methods.
•
Describes new features available in Cisco Performance Monitor 3.2.2, provides important notes regarding the product, lists recently resolved problems and currently known problems, and provides high-level instructions for installing, upgrading to, and uninstalling Performance Monitor.
•
Provides requirements and procedures for installing Security Manager 3.2.2 on a Windows server and for installing dedicated client software for Security Manager 3.2.2 on a Windows PC. Includes pre- and postinstallation guidelines and troubleshooting information.
•
Describes new features available in Security Manager 3.2.2, provides important notes regarding the product, and lists recently resolved problems and currently known problems in Security Manager 3.2.2.
Grants network access to specific MAC addresses regardless of 802.1x capability or credentials.
•
Lists the devices and operating system versions supported by AUS 3.2.2.
•
Lists the devices and operating system versions supported by Cisco Performance Monitor.
•
Lists the devices and operating system versions supported by Security Manager 3.2.2.
Lets the firewall services module (FWSM) take advantage of the processing power of the switch supervisor to increase packet throughput.
•
Provides detailed descriptions of all the features available in AUS 3.2.2 and procedures for implementing these features.
•
Provides detailed descriptions of all the features available in Cisco Performance Monitor 3.2.2 and procedures for implementing these features.
•
Provides detailed descriptions of all the features available in Security Manager 3.2.2, procedures for implementing these features, and comprehensive coverage of each field in the GUI.
Allows you to customize the authproxy web page being displayed and provides redirection to an external web portal after authentication.
Authenticates end users on host systems that do not run the IEEE 802.1X supplicant.
Revised Documents
Supports a switch port for IEEE 802.1x authentication with web authentication as a fallback.
•
Allows an IP phone (Cisco or third-party) and a single host behind the IP phone to authenticate independently, using 802.1X, MAC authentication bypass (MAB), or (for the host only) web-based authentication.
•
Allows you to use identity-based access control lists (ACLs) to assign an access control policy dynamically to an interface based on 802.1x authentication.
Allows you to configure per virtual route forwarding (per VRF) for authentication, authorization, and accounting (AAA) on TACACS+ servers.
Allows Internet service providers (ISPs) to partition RADIUS server groups based on virtual route forwarding (VRF).
•
Provides late-breaking and cumulative release, upgrade, and installation information for Release 4.5.
•
Provides late-breaking and cumulative release and upgrade information for Cisco NAC Profiler Release 2.1.8 (build 37).
Enables network administrators to restrict user access to command-line interface (CLI) and configuration information.
Server Networking and Virtualization
None at this time.
Service Exchange
None at this time.
Storage Networking
None at this time.
Switches
New Documents
•
Enables you to configure switches to stop the multiple spanning tree (MST) region from interacting with per-VLAN spanning tree (PVST) regions.
•
Limits the outgoing interface list to only the local interfaces that each replication engine supports, which prevents unnecessary processing of multicast traffic.
Contains packet switching tests that check different hardware components and verify the data path and control signals.
Forwards packets from one VLAN to another VLAN without doing IP routing.
•
Allows a spanning tree protocol (STP) designated port to revert to discarding if one of its connected bridges does not receive its bridge protocol data units (BPDUs).
Protects against a unidirectional link failure or other software failure and a device that continues to forward data traffic when it is no longer running the spanning tree algorithm.
•
Provides the minimum policer burst value of 0.25 milliseconds.
•
Introduces support for a maximum of 512 EtherChannels in a virtual switching system (VSS).
Introduces support for the application control engine (ACE10 and ACE20) (ACE10-6500-K9 and ACE20-MOD-K9) service modules in a virtual switching system (VSS).
•
Uses special hello messages over a backup Ethernet connection to determine the state of the active chassis.
•
Introduces support for the firewall services module (FWSM) (WS-SVC-FWM-1-K9) in a virtual switching system (VSS).
•
Introduces support for the intrusion detection system services module (IDSM-2) (WS-SVC-IDSM2-K9) in a virtual switching system (VSS).
Allows you apply port-based quality of service (QoS) and port access control lists (PACLs) to any physical port in a virtual switching system (VSS).
Introduces support for the wireless services module (WiSM) (WS-SVC-WiSM-1-K9) in a virtual switching system (VSS).
Introduces enhancements for the VLAN Trunking Protocol (VTP).
Revised Documents
Allows network administrators to select and then capture Layer 2 and Layer 3 protocol traffic for network diagnostics purposes.
TelePresence
None at this time.
Universal Gateways and Access Servers
None at this time.
Video, Cable, and Content Delivery
New Documents
•
Describes how to perform basic and advanced configuration on the Cisco Unified Videoconferencing 3515 MCU12 and MCU24.
Describes how to perform basic and advanced configuration on the Cisco Unified Videoconferencing 3522 BRI Gateway and 3527 PRI Gateway.
•
Describes how to perform basic and advanced configuration on the Cisco Unified Videoconferencing 3545 MCU.
Describes how to perform basic and advanced configuration on the Cisco Unified Videoconferencing 3545 PRI and serial gateways.
•
Describes how to use the Resource Manager, the Network Manager, and the desktop component to configure and manage videoconferencing.
•
Describes how to install and upgrade the Cisco Unified Videoconferencing 3515 MCU.
Describes how to install and upgrade the Cisco Unified Videoconferencing 3522 BRI Gateway and 3527 PRI Gateway.
•
Describes how to install and upgrade the Cisco Unified Videoconferencing 3545 MCU.
Describes how to install and upgrade the Cisco Unified Videoconferencing 3545 PRI and serial gateways.
•
Describes how to install the Cisco Unified Videoconferencing Manager software and how to back up and restore its data.
Describes to administrators how to install and configure the Cisco Unified Videoconferencing Desktop Connector plug-in for use with IBM Lotus Sametime.
Describes to administrators how to install and configure the IBM Lotus Notes plug-in for use with Cisco Unified Videoconferencing Manager.
Describes to administrators how to install and configure the Microsoft OCS plug-in for use with Cisco Unified Videoconferencing Manager.
Describes to administrators how to install and configure the Microsoft Outlook Client plug-in for use with Cisco Unified Videoconferencing Manager.
Describes to end users how to use the Microsoft OCS plug-in to join and moderate a videoconferencing meeting.
Describes to end users how to install and configure the IBM Lotus Notes plug-in and how to use the plug-in to manage videoconferencing meetings.
•
Describes the system requirements, supported upgrades, and caveats.
•
Describes the system requirements, supported upgrades, and caveats.
•
Describes the system requirements, supported upgrades, and caveats.
•
Describes how to perform dialing operations.
•
Describes how to perform dialing operations.
•
Describes how to use the web-based Resource Manager application to manage and monitor visual communication.
Describes to end users how to install and configure the Resource Manager Outlook client and how to manage meetings through Outlook.
Describes to end users how to install and configure the Desktop connector plug-in and how to use the plug-in to establish a Cisco Unified Videoconferencing Connector meeting from the Sametime web user interface.
Voice and Unified Communications
New Documents
•
Explains how to administer and maintain the Cisco IP Communicator and related tools.
•
Contains information about this release of Cisco Unified MeetingPlace Express.
•
Provides task-based information about how to use Cisco IP Communicator Release 7.0.
•
Lists the voice prompts for Cisco Unified MeetingPlace Express in Brazilian Portuguese.
•
Lists the voice prompts for Cisco Unified MeetingPlace Express in Chinese Simplified.
•
Lists the voice prompts for Cisco Unified MeetingPlace Express in Chinese Traditional.
•
Lists the voice prompts for Cisco Unified MeetingPlace Express in Danish.
•
Lists the voice prompts for Cisco Unified MeetingPlace Express in Dutch.
•
Lists the voice prompts for Cisco Unified MeetingPlace Express in European Spanish.
•
Lists the voice prompts for Cisco Unified MeetingPlace Express in Italian.
•
Lists the voice prompts for Cisco Unified MeetingPlace Express in Japanese.
•
Lists the voice prompts for Cisco Unified MeetingPlace Express in Korean.
•
Lists the voice prompts for Cisco Unified MeetingPlace Express in Latin American Spanish.
•
Lists the voice prompts for Cisco Unified MeetingPlace Express in Russian.
•
Lists the voice prompts for Cisco Unified MeetingPlace Express in Swedish.
Revised Documents
•
Contains information about configuring and maintaining Cisco Unified MeetingPlace Express.
•
Lists information for installing and upgrading Cisco Unified MeetingPlace Express Release 2.1.
•
Describes system requirements, new features, changed information, documentation updates, and open caveats for Cisco Phone Control and Presence 7.0 with IBM Lotus Sametime.
•
Contains information about this release of Cisco Unified MeetingPlace Audio Server.
•
Contains information about this release of Cisco Unified MeetingPlace Directory Services.
•
Contains information about this release of Cisco Unified MeetingPlace for IBM Lotus Notes.
•
Contains information about this release of Cisco Unified MeetingPlace for Microsoft Outlook.
•
Contains information about this release of Cisco Unified MeetingPlace H.323/SIP IP Gateway.
•
Contains information about this release of Cisco Unified MeetingPlace Network Backup Gateway.
•
Contains information about this release of Cisco Unified MeetingPlace SMTP Gateway.
Contains information about this release of Cisco Unified MeetingPlace Video Integration and Video Administration.
•
Contains information about this release of Cisco Unified MeetingPlace Web Conferencing.
•
Lists the voice prompts for Cisco Unified MeetingPlace Express in English.
•
Lists the voice prompts for Cisco Unified MeetingPlace Express in European French.
•
Lists the voice prompts for Cisco Unified MeetingPlace Express in French Canadian.
•
Lists the voice prompts for Cisco Unified MeetingPlace Express in German.
•
Describes how to use Cisco Unified MeetingPlace Express.
Wireless
None at this time.
Support from Cisco
Select from Cisco support opportunities at:
http://www.cisco.com/en/US/support/index.html
Uses for this website include:
•
•
•
•
–
–
–
•
•
•
Submitting a Service Request
Open a service request online at:
http://www.cisco.com/techsupport/servicerequest
View a list of Cisco worldwide contacts at:
http://www.cisco.com/warp/public/687/Directory/DirTAC.shtml
Obtaining Additional Information
Information about Cisco products, services, technologies, and networking solutions is available from various online sources.
•
http://www.cisco.com/offer/subscribe
•
http://www.cisco.com/techsupport
•
•
http://www.cisco.com/go/services
•
http://www.cisco.com/go/marketplace/
•
•
•
http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html
•
http://www.cisco.com/public/countries_languages.shtml
CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect, ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient, TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United States and certain other countries.
All other trademarks mentioned in this document or website are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (0812R)
Any Internet Protocol (IP) addresses used in this document are not intended to be actual addresses. Any examples, command display output, and figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses in illustrative content is unintentional and coincidental.
© 2009 Cisco Systems, Inc. All rights reserved.