Troubleshooting Cisco Unified IP Phone
This chapter contains the following sections:
•XML Parsing Errors
The following tips apply to troubleshooting Cisco Unified IP Phone service applications:
•Microsoft Internet Explorer 5 or higher can display the XML source with its default style sheet.
•Understand that standard IP troubleshooting techniques are important for HTTP errors.
•Externally verify name resolution (Phone has DNS set).
•If DNS is suspected, use IP addresses in URLs.
•Browse the URL in question with Microsoft Internet Explorer or download and verify with another web browser
•Use a logged telnet session to verify that the desired HTTP headers are returned (Telnet to the server on port 80; then, enter get /path/page).
XML Parsing Errors
The following tips apply to troubleshooting XML parsing errors in Cisco Unified IP Phone services applications:
•Verify the object tags (the object tags are case sensitive).
•Verify that "&" and the other four special characters are used per the restrictions while inside the XML objects. See Chapter 3, "CiscoIPPhone XML Objects" for more information.
•Validate XML applications developed prior to Cisco Unified IP Phone firmware release 8.3(2) against the more recent XML parser (see the "Updated XML Parser and Schema Enforcement" section on page B-1 for details). Some of examples of the types of errors you might encounter include:
–CiscoIPPhoneMenu Object—If the field
<Name> is missing for a
<MenuItem>, the original parser would stop rendering from that
<MenuItem> onwards. The new parser will display a blank line in the menu list and continue to render any subsequent
–CiscoIPPhoneDirectory Object—If the field
<Name> is not present, the old original parser would not display the directory entry, the new parser will display the directory entry, but there will be no
<Name> associated with it.
QueryStringParam fields are mandatory. The original parser would not report an error on the missing URL and on submit request would display a "Host not Found: message. If the
QueryStringParam field is missing, the updated parser will report an error.
–SoftKeyItem—The Position field is mandatory. If the Position field is not present, the updated XML parser will report an error.
The following error messages may appear on the prompt line of the Cisco Unified IP Phone display:
XML Error = XML Parser error (Invalid Object)
XML Error = Unsupported XML Object (not supported by this phone model)
HTTP Error = Unknown HTTP Error
HTTP Error = HTTP Connection Failed