Cisco Unified Communications Manager Administration Guide, Release 9.1(1)
Meet-Me number and pattern setup
Downloads: This chapterpdf (PDF - 1.07MB) The complete bookPDF (PDF - 9.6MB) | Feedback

Meet-Me number and pattern setup

Meet-Me number and pattern setup

This chapter provides information about Meet-Me Number and Pattern configuration.

For additional information, see topics related to conference bridges in the Cisco Unified Communications Manager System Guide.

About Meet-Me number and pattern setup

In Cisco Unified Communications Manager Administration, use the Call Routing > Meet-Me Number/Pattern menu path to configure meet-me numbers/patterns.

Meet-Me conferences require an allocation of directory numbers. Cisco Unified Communications Manager Administration provides the Meet-Me conference directory number range to users, so they can access the feature.

Meet-Me numbers and patterns configuration tips

Make sure that the following prerequisites are met before you configure Meet-Me numbers/patterns:

  • Configure the server(s).
  • Configure the device pools.
Related Information

Meet-Me number and pattern settings

The following table describes the meet-me number/pattern settings.

Table 1 Meet-Me number and pattern settings

Field

Description

Directory Number or Pattern

Enter a Meet-Me Numbers/pattern or a range of numbers.

To configure a range, the dash must appear within brackets and follow a digit; for example, to configure the range 1000 to 1050, enter 10[0-5]0.

Description

The description can include up to 50 characters in any language, but it cannot include double-quotes ("), percentage sign (%), ampersand (&), or angle brackets (<>).

Partition

To use a partition to restrict access to the meet-me/number pattern, choose the desired partition from the drop-down list box.

If you do not want to restrict access to the meet-me number/pattern, choose <None> for the partition. See the Partition setup for more information.

You can configure the number of partitions that display in this drop-down list box by using the Max List Box Items enterprise parameter. If more partitions exist than the Max List Box Items enterprise parameter specifies, the Find button displays next to the drop-down list box. Click the Find button to display the Find and List Partitions window. Find and choose a partition name by using the procedure in the Search for partition.

Note   

To set the maximum list box items, choose System > Enterprise Parameters and update the Max List Box Items field under CCMAdmin Parameters.

Note   

Make sure that the combination of meet-me number/pattern and partition is unique within the Cisco Unified Communications Manager cluster.

Minimum Security Level

Choose the minimum Meet-Me conference security level for this meet-me number or pattern from the drop-down list box.

  • Choose Authenticated to block participants with nonsecure phones from joining the conference.
  • Choose Encrypted to block participants with authenticated or nonsecure phones from joining the conference.
  • Choose Non Secure to allow all participants to join the conference.
Note   

To invoke this feature, ensure you have a secure conference bridge that is configured and available. See the Cisco Unified Communications Manager Security Guide for more information.

Related Information