Cisco Network Convergence System 4000 Series
| Panoramica | Panoramica del prodotto |
|---|---|
| Status | Disponibile Ordina dalla serie |
| Data di rilascio della serie | 23-SEP-2013 |
|
Modelli supportati: - Cisco Network Convergence System (NCS) 4009 - Cisco Network Convergence System (NCS) 4016 Vedere anche: Confronto tra i modelli NCS serie 4000 > |
|
Feedback-
Risultati principali della ricerca
Informazioni principali
I clienti hanno visualizzato anche
Contenuti salvati
-
Ora puoi salvare i documenti per accedervi più facilmente e per future consultazioni. I documenti salvati per questo prodotto verranno elencati qui oppure sulla pagina Contenuti salvati dove potrai visualizzare e gestire tutti i contenuti salvati di Cisco.com.
Accedi per visualizzare i contenuti salvati.
Categorie di documenti
-
Collections
- Optical Networking Licensing Information
Licensing
-
Schede tecniche e informazioni sui prodotti
-
English
- End-of-Sale and End-of-Life Announcement for the Cisco NCS 4000 SW Release 6.1.42 and 6.5.1
- End-of-Sale and End-of-Life Announcement for the Cisco NCS 4000 2x 100G CPAK 10x10G SFP+ OTN/Packet Line Card and 24-port Low rate OTN LC
- End-of-Sale and End-of-Life Announcement for the Cisco NCS4000 SSD disk 200G for ECU
- End-of-Sale and End-of-Life Announcement for the Cisco NCS 4000 AC Power front connection adapter
- End-of-Sale and End-of-Life Announcement for the Cisco NCS4K TAA PIDs
- End-of-Sale and End-of-Life Announcement for the Cisco NCS4K Release 6.1.3.2
- End-of-Sale and End-of-Life Announcement for the Cisco NCS4K 5.2.4
- End-of-Sale and End-of-Life Announcement for the Cisco NCS4000 5.2.1 and 5.2.3
- End-of-Sale and End-of-Life Announcement for the Cisco NCS4016 200G Fabric Chassis
- End-of-Sale and End-of-Life Announcement for the Cisco NCS4K-2H-W (NCS 4000 2 x 100G CP-DQPSK - Full C band Tunable)
- End-of-Sale and End-of-Life Announcement for the Cisco NCS4000 Software Version 6.0.1 and 6.1.2
- End-of-Sale and End-of-Life Announcement for the Cisco NCS 4009 Agnostic Cross Connect - Single-Chassis
- End-of-Sale and End-of-Life Announcement for the Cisco Network Convergence System 4000 Series 20x10G and 2x100G OTN Line Card
Avvisi di fine del ciclo di vita e di fine vendita
-
- Cisco Network Convergence System 4000 Series Data Sheet
- Cisco Network Convergence System 4000 Multi-Chassis System Data Sheet
- Cisco Network Convergence System 4000 Series DWDM Line Cards Data Sheet
- Cisco NCS 4000 Optical Transport Network (OTN) Line Cards Data Sheet
- Cisco Network Convergence System (NCS) Converged 2x100 Gbps, 10 Gbps Line Card Data Sheet
- Cisco NCS 4000 400 Gbps DWDM/OTN/Packet Universal Line Card Data Sheet
Schede tecniche
-
-
Avvisi di sicurezza
-
Applicable to Multiple Models
- Field Notice: FN - 72290 - Cisco IOS XR: QuoVadis Root CA 2 Decommission Might Affect Smart Licensing and Smart Call Home Functionality - Workaround Provided
- Field Notice: FN - 70481 - SMAUG FPD Upgrade Does Not Complete for a Limited Set of NCS 4000 400 Gbps DWDM/OTN/Packet Universal Line Cards - Software Upgrade Recommended
- Field Notice: FN - 70503 - Certain NCS 4000 Products Are Not Supported With Software Releases Earlier Than Cisco IOS XR 6.5.29 Without a Software Upgrade - Software Upgrade Recommended
- Field Notice: FN - 64142 - NCS4K-RP AMI Mode for BITS Interface TI and E1 Non-Functional - Replace on Failure
-
Cisco NCS 4016
- Field Notice: FN - 70589 - DC Power Supply Units on NCS 4000 Series Fabric Card Chassis Have Limited FPD Upgrade Support on Cisco IOS XR 6.5.26 - Software Upgrade Recommended
Notifiche sul campo
-
-
Versione e compatibilità
-
Applicable to Multiple Models
- Release Notes for Cisco NCS 4000 Series, IOS XR Release 6.5.35
- Release Notes for Cisco NCS 4000 Series, Cisco IOS XR Release 6.5.33
- Release Notes for Cisco NCS 4000 Series, Cisco IOS XR Release 6.5.32
- Release Notes for Cisco NCS 4000 Series, Cisco IOS XR Release 6.5.29
- Release Notes for Cisco NCS 4000 Series, Cisco IOS XR Release 6.5.28
- Release Notes for Cisco NCS 4000 Series, Cisco IOS XR Release 6.5.26
- Release Notes for Cisco NCS 4000 Series, Cisco IOS XR Release 6.5.25
- Release Notes for Cisco NCS 4000 Series, Cisco IOS XR Release 6.1.42
- Release Notes for Cisco NCS 4000 Series, Cisco IOS XR Release 5.2.4.7
- Release Notes for Cisco NCS 4000 Series, Cisco IOS XR Release 5.2.4
- Release Notes for Cisco NCS 4000 Series, Cisco IOS XR Release 6.1.22
- Release Notes for Cisco NCS 4000 Series, Cisco IOS XR Release 6.1.1.2
- Release Notes for Cisco NCS 4000 Series, Cisco IOS XR Release 6.1.1.2
Note release
-
-
Riferimento
-
Applicable to Multiple Models
Riferimenti per i comandi
-
Applicable to Multiple Models
- Cisco NCS 4000 Series MIB Specifications Guide (PDF - 3 MB)
Riferimenti tecnici
-
-
Installazione e aggiornamento
-
Applicable to Multiple Models
- Hardware Installation Guide for Cisco NCS 4000 Series
- Regulatory Compliance and Safety Information - Cisco Network Convergence System 4000 Information sur la réglementation de la conformité et de sécurité-Cisco Network Convergence System 4000 (PDF - 4 MB)
- Cisco Network Convergence System 4000 Fabric Card Chassis Hardware Installation Guide
-
Cisco NCS 4016
Guide all'installazione e all'aggiornamento
-
-
Configurazione
-
Applicable to Multiple Models
- Risoluzione dei problemi relativi alle schede di linea (LC) su NCS4016
Esempi di configurazione e note tecniche
-
Applicable to Multiple Models
- Configuration Guide for Cisco NCS 4000 Series
- Quality of Service Configuration Guide for Cisco NCS 4000 Series
- Telemetry Configuration Guide for Cisco NCS 4000 Series Routers, IOS XR Release 6.5.x
- Programmability Configuration Guide for Cisco NCS 4000 Series Routers, IOS XR Release 6.5.x
- System Setup and Software Installation Guide for Cisco NCS 4000 Series
-
Cisco NCS 4009
Guide alla configurazione
-
-
Risoluzione dei problemi
-
Applicable to Multiple Models
Guide alla risoluzione dei problemi
-
Applicable to Multiple Models
-
Cisco NCS 4016
- Verifica della programmazione VoQ hardware su un NCS4K multicassis
- Risoluzione dei problemi relativi al BFD nello stato INIT sul nodo NCS4K
- Procedura di migrazione in servizio da ECU a ECU2 per sistema NCS4000 con CLI
Note tecniche per la risoluzione dei problemi
-
-
Accedi per visualizzare i download disponibili.
-
