Label: emergency_call

Label Description: Number of emergency calls in cnSGW

Example: SGW:emergency_call:true

Label: rat_type

Label Description: Rat type of sessions. For cnSGW there is only one rat_type EUTRAN

Example: SGW:rat_type:EUTRAN

Label: state

Label Description: Number of active or idle subscriber state.

Example: SGW:state:active , SGW:state:idle

Label: pdn_active

Label Description: Number of active PDNs for that subscriber.

Example: SGW:pdn_active:1 , SGW:pdn_active:2

Label: bearer_active

Label Description: Number of active Bearers for that subscriber.

Example: SGW:bearer_active:1 , SGW:bearer_active:2

Label: apn

Label Description: Number of subscribers per apn.

Example: SGW:apn:internet2, SGW:apn:ims2

Label: colocated

Label Description: Number of colocated or non-colocated subscriber.

Example: SGW:colocated:true, SGW:colocated:false

Label: total

Label Description: Total number of sessions in CDL

Example: total

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: action

Label Description: Type of CDR operation

Example: close_final, close_interim, open

Label: change_condition

Label Description: Reason for container close operation

Example: recordClosure,qoSChange,userLocationChange,apnAmbrChange

Label: event

Label Description: Event that triggered CDR action

Example: StartAccounting,SGWChange,NormalRelease etc.

Label: pdn_type

Label Description: The pdn_type indicates the address type of PDN

Example: ipv4, ipv6, ipv4v6, unknown

Label: pdn_plmn_type

Label Description: The pdn_plmn_type indicates the plmn type

Example: homer,visitor,roamer,unknown

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: action

Label Description: Type of CDR operation

Example: close_final, close_interim, open

Label: cause

Label Description: Reason for CDR close operation

Example: maxChangeCond,servingNodeChange,volumeLimit,LTEServingNodeChange,abnormalRelease etc.

Label: event

Label Description: Event that triggered CDR action

Example: StartAccounting,SGWChange,NormalRelease etc.

Label: pdn_type

Label Description: The pdn_type indicates the address type of PDN

Example: ipv4, ipv6, ipv4v6, unknown

Label: pdn_plmn_type

Label Description: The pdn_plmn_type indicates the plmn type

Example: homer,visitor,roamer,unknown

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: status

Label Description: Processing status

Example: success, ur_dropped_invalid_urr_seqNo, ur_dropped_bearer_not_found, ur_dropped_urrInfo_not_found, ur_dropped_acct_ctxt_not_found, ur_dropped_bearer_not_connected

Label: sx_usage_report_trigger_type

Label Description: Usage Report Trigger Type

Example: VOLTH, TIMTH, TERMR, TEBUR etc

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: status

Label Description: Bearer Status

Example: active

Label: qci

Label Description: Bearer QCI

Example: 1, 2, 3, 4, 5, 6, 7, 8, 9, 65, 66, 69, 70, 80, 82, 83, non-std-qci

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: status

Label Description: Bearer Status

Example: attempted, setup, release, modified

Label: qci

Label Description: Bearer QCI

Example: 1, 2, 3, 4, 5, 6, 7, 8, 9, 65, 66, 69, 70, 80, 82, 83, non-std-qci

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: txn_type

Label Description: Transaction type

Example: ClearSubscriberSgwReq, N4SessionReportReq, NIntSgwSelfTxnBearerDisconnect, NIntSgwSelfTxnPagingStatusReq, NIntSgwSelfTxnPdnDisconnect, NIntSgwSelfTxnSxaSessRptReq, NSgwInternalTimerNotification, NSgwTimerNotificationReq, ReleaseAccessBearerReq, S11CreateSessReq, S11DeleteSessReq, S11ModifyBearerReq, S11ModifyBearerReqInitialAttach, S11ModifyBearerReqInterSystemHo, S11ModifyBearerReqIntraMMEX2S1HoNoSgwChange, S11ModifyBearerReqList, S11ModifyBearerReqListInterSystemHo, S11ModifyBearerReqListIntraMMEX2S1HoNoSgwChange, S11ModifyBearerReqListOnlyForUliChange, S11ModifyBearerReqListS1HOSgwRelocation, S11ModifyBearerReqListServiceRequest, S11ModifyBearerReqListUnknownMBR, S11ModifyBearerReqOnlyForUliChange, S11ModifyBearerReqS1HOSgwRelocation, S11ModifyBearerReqServiceRequest, S11ModifyBearerReqUnknownMBR, S5CreateBearerReq, S5DeleteBearerReq, S5S8BearerResourceCmd, S5UpdateBearerReq, S11SuspendNotf, S11ResumeNotf

Label: status

Label Description: Indicate whether transaction is success, aborted or timeout

Example: success, collision_abort, timeout

Label: cdl_update_type

Label Description: Indicate CDL update type

Example: partial_cdl_update, full_cdl_update, no_cdl_update

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: action_type

Label Description: The pre-defined action taken to handle the collision. The action can be

Example: abort_new, abort_old, discard_new, discard_old

Label: new_proc

Label Description: The new procedure and message type"

Example: Unknown, PDN Setup, PDN Modify, Create Bearer, Update Bearer, Delete Bearer, PDN Disconnect - UE initiated, PDN Disconnect - Admin initiated, PDN Disconnect - PGW initiated, PDN Disconnect - Self initiated, Modify Bearer Command, Delete Bearer Command, Release Access Bearer, Downlink Data Notification, Clear Subsciber - S5e Recovery Initiated,Clear Subsciber - Sx Recovery Initiated,Clear Subsciber - S11 Recovery Initiated,Clear Subsciber - S5e Path Failure Initiated,Clear Subsciber - Sx Path Failure Initiated,Clear Subsciber - S11 Path Failure Initiated,Clear Subsciber - S11 Path Failure Local Purge Initiated,Clear Subsciber - S11 Recovery Local Purge Initiated,Clear Subsciber - S5e Path Failure Local Purge Initiated,Clear Subsciber - S5e Recovery Local Purge Initiated,Clear Subscriber - Sx Association Release Initiated, Change Notification, PDN Disconnect - Upf Graceful Termination Initiated, PDN Disconnect - S5u Gtpu Error Local Purge Initiated, PDN Disconnect - S1u Gtpu Session replacement Initiated, PDN Disconnect - S5u Gtpu Session replacement Initiated, PDN Disconnect - S1u Gtpu Error Local Purge Initiated, PDN Disconnect - S5u Gtpu Error Local Purge Initiated, PDN Disconnect - S1u Gtpu Session replacement Local Purge Initiated, PDN Disconnect - S5u Gtpu Session replacement Local Purge Initiated, Clear Subscriber - Sx Session Idle Timeout Initiated, Bearer Disconnect - S1u Gtpu Error Local Purge Initiated, Bearer Disconnect - S5u Gtpu Error Local Purge Initiated, Bearer Disconnect - S1u Gtpu Session replacement Local Purge Initiated, Bearer Disconnect - S5u Gtpu Session replacement Local Purge Initiated, Bearer Disconnect - S5u Gtpu Error Local Purge Initiated, Bearer Disconnect - S1u Gtpu Session replacement Initiated, Bearer Disconnect - S5u Gtpu Session replacement Initiated, Clear Subsciber - S1u Gtpu Path Failure Initiated, Clear Subsciber - S5u Gtpu Path Failure Initiated, Clear Subsciber - S1u Gtpu Path Failure Local Purge Initiated, Clear Subsciber - S5u Gtpu Path Failure Local Purge Initiated, Bearer Disconnect - S1u Gtpu Path Failure Initiated, Bearer Disconnect - S5u Gtpu Path Failure Initiated, Bearer Disconnect - S1u Gtpu Path Failure Local Purge Initiated, Bearer Disconnect - S5u Gtpu Path Failure Local Purge Initiated, upf_initiated_clear_subscriber, upf_initiated_association_release, upf_recovery_failure, sx_urss_association_release_initiated_deletion, upf_initiated_self_protection_termination

Label: old_proc

Label Description: Indicates the ongoing procedure at eGTP-C when a new message arrived at the interface which caused the collision. The Msg Type in brackets specifies which message triggered this ongoing procedure"

Example: Unknown, PDN Setup, PDN Modify, Create Bearer, Update Bearer, Delete Bearer, PDN Disconnect - UE initiated, PDN Disconnect - Admin initiated, PDN Disconnect - PGW initiated, PDN Disconnect - Self initiated, Modify Bearer Command, Delete Bearer Command, Release Access Bearer, Downlink Data Notification, Clear Subsciber - S5e Recovery Initiated,Clear Subsciber - Sx Recovery Initiated,Clear Subsciber - S11 Recovery Initiated,Clear Subsciber - S5e Path Failure Initiated,Clear Subsciber - Sx Path Failure Initiated,Clear Subsciber - S11 Path Failure Initiated,Clear Subsciber - S11 Path Failure Local Purge Initiated,Clear Subsciber - S11 Recovery Local Purge Initiated,Clear Subsciber - S5e Path Failure Local Purge Initiated,Clear Subsciber - S5e Recovery Local Purge Initiated,Clear Subscriber - Sx Association Release Initiated, Change Notification, PDN Disconnect - Upf Graceful Termination Initiated, PDN Disconnect - S5u Gtpu Error Local Purge Initiated, PDN Disconnect - S1u Gtpu Session replacement Initiated, PDN Disconnect - S5u Gtpu Session replacement Initiated, PDN Disconnect - S1u Gtpu Error Local Purge Initiated, PDN Disconnect - S5u Gtpu Error Local Purge Initiated, PDN Disconnect - S1u Gtpu Session replacement Local Purge Initiated, PDN Disconnect - S5u Gtpu Session replacement Local Purge Initiated, Clear Subscriber - Sx Session Idle Timeout Initiated, Bearer Disconnect - S1u Gtpu Error Local Purge Initiated, Bearer Disconnect - S5u Gtpu Error Local Purge Initiated, Bearer Disconnect - S1u Gtpu Session replacement Local Purge Initiated, Bearer Disconnect - S5u Gtpu Session replacement Local Purge Initiated, Bearer Disconnect - S5u Gtpu Error Local Purge Initiated, Bearer Disconnect - S1u Gtpu Session replacement Initiated, Bearer Disconnect - S5u Gtpu Session replacement Initiated, Clear Subsciber - S1u Gtpu Path Failure Initiated, Clear Subsciber - S5u Gtpu Path Failure Initiated, Clear Subsciber - S1u Gtpu Path Failure Local Purge Initiated, Clear Subsciber - S5u Gtpu Path Failure Local Purge Initiated, Bearer Disconnect - S1u Gtpu Path Failure Initiated, Bearer Disconnect - S5u Gtpu Path Failure Initiated, Bearer Disconnect - S1u Gtpu Path Failure Local Purge Initiated, Bearer Disconnect - S5u Gtpu Path Failure Local Purge Initiated, upf_initiated_clear_subscriber, upf_initiated_association_release, upf_recovery_failure, sx_urss_association_release_initiated_deletion, upf_initiated_self_protection_termination

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: ddn_stats_type

Label Description: The pre-defined ddn_stats_type

Example: high_priority_initiated, high_priority_suppressed, throttled, delayed, control_proc_triggered, data_triggered, gtpu_err_ind_triggered

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: pdn_type

Label Description: The pdn_type indicates the address type of PDN

Example: ipv4, ipv6, ipv4v6, unknown

Label: rat_type

Label Description: The rat_type indicates which Radio Access Technology is currently serving the UE"

Example: EUTRAN

Label: reason

Label Description: The reason indicates the disconnect reason associate with the pdn"

Example: admin_init_disconnect, remote_init_disconnect, pgw_init_pdn_sess_rel, mme_init_pdn_sess_rel, sx_request_rejected, sx_context_not_found, sx_msg_invalid_length, sx_no_resource_available, sx_no_response, sx_reason_unknown, no_response, s5_context_not_found, s11_context_not_found, local_disconnect, no_cause, userplane_info_not_available, setup_timeout, admin_init_local_purge, db_conflict_init_disconnect, context_replacement, userplane_session_idle_timeout, userplane_requested_graceful_termination, s1u_gtpu_error, s5u_gtpu_error, s1u_gtpu_session_replacement, s5u_gtpu_session_replacement, sx_recovery, sx_path_failure,s11_path_failure, s5e_path-failure,s11_path_failure_local_purge, s5e_ path_failure_local_purge,s5e_recovery, s11_recovery, s5e_recovery_local_purge,s11_recovery_local_purge, s1u_gtpu_path_failure, s5u_gtpu_path_failure, stale_session_init_disconnect, mop_offline, userplane_initiated_clear_subscriber, userplane_initiated_association_release, userplane_initiated_recovery_failure, sx_urss_association_release, userplane_initiated_self_protection_termination

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: status

Label Description: Active emps session

Example: active

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: status

Label Description: Status of emps session

Example: setup, release

Label: rat_type

Label Description: The rat_type indicates which Radio Access Technology is currently serving the UE"

Example: EUTRAN

Label: pdn_type

Label Description: The pdn_type indicates the address type of PDN

Example: ipv4, ipv6, ipv4v6, unknown

Label: pdn_plmn_type

Label Description: It indicates the plmn type for the subscriber

Example: homer, visitor, roamer, unknown

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: rat_type

Label Description: The rat_type indicates which Radio Access Technology is currently serving the UE"

Example: EUTRAN

Label: status

Label Description: Subscriber status

Example: setup, release

Label: pdn_type

Label Description: The pdn_type indicates the address type of PDN

Example: ipv4, ipv6, ipv4v6, unknown

Label: pdn_plmn_type

Label Description: It indicates the plmn type for the subscriber

Example: homer, visitor, roamer, unknown

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: sgw_procedure_type

Label Description: The procedure type associated with the call flow procedure

Example: initial_attach, secondary_pdn_creation, mme_initiated_deletion, pgw_initiated_deletion, update_bearer, create_bearer, downlink_data_notification, downlink_data_notification_retry, pgw_initiated_dedicated_bearer_deletion, release_access_bearer, inter_mme_intra_sgw_idle_mode, intra_mme_intra_sgw_idle_mode, service_request, modify_bearer_req_initial_attach, inter_mme_handover, intra_mme_handover, inter_system_handover, modify_bearer_req_uli_tz_change, admin_initiated_deletion, s5_cnf_initiated_deletion, s11_cnf_initiated_deletion, sx_cnf_initiated_deletion, local_initiated_deletion, setup_timeout_deletion, create_indirect_data_forwarding_tunnel, delete_indirect_data_forwarding_tunnel, indirect_data_forwarding_tunnel_guard_timer_expiry, db_conflict_initiated_deletion, s1_sgw_relocation_attach, context_replacement, modify_bearer_command, delete_bearer_command, inter_system_handover_attach, x2_gngp_to_lte_relocation_attach, s1_gngp_to_lte_relocation_attach, inter_system_handover, modify_bearer_req_x2_gngp_to_lte_relocation, modify_bearer_req_s1_gngp_to_lte_relocation, change_notification, upf_sess_idle_timeout_deletion, upf_initiated_graceful_deletion,s5e_path_failure_initiated_deletion,s5e_recovery_initiated_deletion,s11_path_failure_initiated_deletion,s11_recovery_initiated_deletion,sx_path_failure_initiated_deletion,sx_recovery_initiated_deletion, s5u_gtpu_error_initiated, s1u_gtpu_session_replacement_initiated, s5u_gtpu_session_replacement_initiated, s1u_gtpu_path_failure_initiated, s5u_gtpu_path_failure_initiated, s5u_gtpu_error_initiated_bearer_deletion, s1u_gtpu_error_local_purge_initiated_bearer_deletion, s5u_gtpu_error_local_purge_initiated_bearer_deletion, s1u_gtpu_session_replacement_initiated_bearer_deletion, s5u_gtpu_session_replacement_initiated_bearer_deletion, s1u_gtpu_session_replacement_local_purge_initiated_bearer_deletion, s5u_gtpu_session_replacement_local_purge_initiated_bearer_deletion, s1u_gtpu_path_failure_initiated_bearer_deletion, s5u_gtpu_path_failure_initiated_bearer_deletion, s1u_gtpu_path_failure_local_purge_initiated_bearer_deletion, s5u_gtpu_path_failure_local_purge_initiated_bearer_deletion, stale_session_initiated_deletion, dbcfi_cnf_local_purge_initiated_bearer_deletion, suspend_notification, resume_notification, pdn_state_sync, upf_initiated_clear_subscriber, upf_initiated_association_release, upf_recovery_failure, sx_urss_association_release_initiated_deletion, upf_initiated_self_protection_termination

Label: interface

Label Description: The interface type associated with the call flow procedure

Example: interface_sgw_ingress, interface_sgw_egress

Label: status

Label Description: The status of the call flow procedure. In case of procedure failure it can indicate whether the message was rejected or was the message discarded.

Example: attempted, success, failure, rejected, discarded

Label: fail_reason

Label Description: High level reason for failure status. For sucessess and attempted it will be Empty

Example: gtp_validation_fail, gtp_cause_fail, gtp_peer_not_responding, sx_validation_fail, sx_cause_fail, sx_peer_not_responding, timeout, internal_failure, userplane_selection_fail, gtp_partial_fail, sx_oci_throttling_reject, collision_abort, collision_discard, gtp_entity_in_congestion

Label: sub_fail_reason

Label Description: Incoming negative GTP/Sx Cause or type of TIMEOUT that led to the failure. For other failures it will be Empty

Example: invalid_msg_format, version_not_supported, service_not_supported, imsi_imei_not_known, preferred_pdn_type_unsupported, mand_ie_missing, cond_ie_missing, invalid_len, mand_ie_incorrect, no_resource_available, temp_rejected_due_to_handover_in_progress, peer_not_responding, context_not_found, unable_to_page_ue, unable_to_page_ue_due_to_suspension, ue_already_reattached, temp_rejected_due_to_ho_in_progress, sx_req_rejected, invalid_fw_policy, invalid_fteid_alloc_opt, rule_creation_mod_fail, no_estab_sx_assoc, system_failure, pfcp_entity_in_congestion, procedure_timeout, ipc_timeout, transaction_timeout, missing_or_unknown_apn

Label: reject_cause

Label Description: In case of procedure failure it will be used to indicate the outgoing GTP/Sx cause being sent to the peer. In other cases it will be Empty.

Example: invalid_msg_format, version_not_supported, invalid_len, mandatory_ie_missing, conditional_ie_missing, mandatory_ie_incorrect, service_not_supported, imsi_imei_not_known, preferred_pdn_type_unsupported, system_failure, no_resources_available, temp_rejected_due_to_handover_in_progress, service_denied, peer_not_responding, context_not_found, request_rejected, missing_or_unknown_apn, entity_in_congestion

Label: svc_to_svc

Label Description: In case of gtp bypass, i.e. service to service communication this is set as True, else False

Example: True, False

Label: label_id_type

Label Description: The label_id_type indicates if its ID allocation or deallocation"

Example: id_alloc, id_dealloc

Label: status

Label Description: The status of ID allocation/deallocation

Example: attempted, success, failure

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: sx_session_report_type

Label Description: Type of the session-report

Example: USAR, DLDR, ERIR, UPIR, SPTER, SRIR, GTER, UPRR, UISR

Label: sx_usage_report_status

Label Description: Processing status of usage report

Example: success, failure

Label: reason

Label Description: Reason for Session Report Request

Example: psdbu

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: timer_type

Label Description: Timer type

Example: internal_ddn_delay

Label: status

Label Description: Status of timer

Example: start, stop, expired

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: reason

Label Description: The reason indicates the disconnect reason associated with the UE

Example: admin_init_disconnect, remote_init_disconnect, pgw_init_pdn_sess_rel, mme_init_pdn_sess_rel, sx_request_rejected, sx_context_not_found, sx_msg_invalid_length, sx_no_resource_available, sx_no_response, sx_reason_unknown, no_response, s5_context_not_found, s11_context_not_found, local_disconnect, no_cause, userplane_info_not_available, db_conflict_init_disconnect, userplane_session_idle_timeout, userplane_requested_graceful_termination, s1u_gtpu_error, s5u_gtpu_error, s1u_gtpu_session_replacement, s5u_gtpu_session_replacement, sx_recovery, sx_path_failure,s11_path_failure, s5e_path-failure,s11_path_failure_local_purge, s5e_ path_failure_local_purge,s5e_recovery, s11_recovery, s5e_recovery_local_purge, s11_recovery_local_purge, s1u_gtpu_path_failure, s5u_gtpu_path_failure, stale_session_init_disconnect, mop_offline, userplane_initiated_clear_subscriber, userplane_initiated_association_release, userplane_initiated_recovery_failure, sx_urss_association_release, userplane_initiated_self_protection_termination

Label: rat_type

Label Description: The rat_type indicates which Radio Access Technology is currently serving the UE"

Example: EUTRAN

Label: state

Label Description: Subscriber state

Example: idle, connected

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: rat_type

Label Description: The rat_type indicates which Radio Access Technology is currently serving the UE"

Example: EUTRAN

Label: status

Label Description: Subscriber status

Example: setup, release

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: state

Label Description: Session type

Example: VolteSession

Label: gr_instance_id

Label Description: GR instance ID

Example: 1, 2

Label: type

Label Description: Callflow optimization type

Example: suppress_uli_reporting_on_s5, rab_prepone_ack