Cisco Ultra Cloud Core CPC AAA- API Reference, Release 2026.02

API Requests and Responses

Note

Elements defined as mandatory ([1..x]) in cnAAA response schema is applicable only to success response and not to failure response.

Single API Request

CreateSubscriberRequest

This API creates a subscriber in the USuM database. It also allows provisioning of initial quota/balance using the CreateBalance element.

Schema

<CreateSubscriberRequest>
<audit> AuditType </audit> [0..1] ?
<subscriber> SubscriberType </subscriber> [1]
</CreateSubscriberRequest>

Example

curl -k -X POST "https://pcf.unified-api.203.0.113.1.nip.io/apirouter" \
     -H "Content-Type: text/xml; charset=utf-8" \
     -H "SOAPAction: \"http://broadhop.com/unifiedapi/soap/types/CreateSubscriberRequest\"" \
     -d '<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv=
"http://schemas.xmlsoap.org/soap/envelope/" xmlns:typ="http://broadhop.com/unifiedapi/soap/types">
   <soapenv:Header/>
   <soapenv:Body>
      <typ:CreateSubscriberRequest>
         <subscriber>
        <name>
            <fullName>LaasUser_41</fullName>
        </name>
        <credential>
            <networkId>uniqueIdentifier</networkId>
            <password>password</password>
        </credential>
        <service>
            <code>Plan0</code>
            <enabled>true</enabled>
        </service>
        <avp>
            <code>Called-Station-Id</code>
            <value>LaasUser_41</value>
        </avp>
        <avp>
            <code>CIRCLE_CODE</code>
            <value>WB</value>
        </avp>
        <avp>
            <code>PINCODE</code>
            <value>405041</value>
        </avp>
        <status>ACTIVE</status>
    </subscriber>
     </typ:CreateSubscriberRequest>
   </soapenv:Body>
</soapenv:Envelope>'

CreateSubscriberResponse

Schema

<CreateSubscriberResponse>
			<errorCode> xsd:integer (0 >= value < 1000) </errorCode> [1] ?
			<errorMessage> xsd:string </errorMessage> [1] ?
</CreateSubscriberResponse>

Example

<se:Envelope xmlns:se="http://schemas.xmlsoap.org/soap/envelope/">
  <se:Body>
    <CreateSubscriberResponse xmlns="http://broadhop.com/unifiedapi/soap/types">
      <errorCode>0</errorCode>
      <errorMessage>Request completed successfully</errorMessage>
    </CreateSubscriberResponse>
  </se:Body>
</se:Envelope>

GetSubscriberRequest

This API retrieves a subscriber from the USuM database.

Note

Success Response

The GetSubscriber API returns error code 0 (success) even if no subscriber is found.

See the QueryBalance request for information about the boolean options: includeExpiredData and excludeReservationsFromCreditTotal

Schema:

<GetSubscriberRequest>
<audit> AuditType </audit> [0..1] ?
<networkId> xsd:string </networkId> [1] ?
<returnSessions> xsd:boolean </returnSessions> [0..1] ?
<returnBalances> xsd:boolean </returnBalances> [0..1] ?
<includeExpiredData> xsd:boolean </includeExpiredData> [0..1] ?
<excludeReservationsFromCreditTotal> xsd:boolean </excludeReservationsFromCreditTotal>
[0..1] ?
</GetSubscriberRequest>

Example:

curl -k -X POST "https://pcf.unified-api.203.0.113.1.nip.io/apirouter" \
     -H "Content-Type: text/xml; charset=utf-8" \
     -H "SOAPAction: \"http://broadhop.com/unifiedapi/soap/types/GetSubscriberRequest\"" \
     -d '<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:typ="http://broadhop.com/unifiedapi/soap/types">
   <soapenv:Header/>
   <soapenv:Body>
      <typ:GetSubscriberRequest>
         <typ:networkId>SVI_Subscriber_3300424</typ:networkId>
      </typ:GetSubscriberRequest>
   </soapenv:Body>
</soapenv:Envelope>'

Note

This existing GetSubscriberRequest is used in a new Dual-Write Proxy logic. The UpdateSubscriber logic is enhanced to require specific <id> and <version> injection for data consistency.

GetSubscriberResponse

Schema:

<GetSubscriberResponse>
<errorCode> xsd:integer (0 >= value < 1000) </errorCode> [1] ?
<errorMessage> xsd:string </errorMessage> [1] ?
<subscriber> SubscriberType </subscriber> [0..1]
</GetSubscriberResponse>

Example:

<se:Envelope xmlns:se="http://schemas.xmlsoap.org/soap/envelope/"><se:Body><GetSubscriberResponse 
xmlns="http://broadhop.com/unifiedapi/soap/types"><errorCode>0</errorCode><errorMessage>
Request completed successfully</errorMessage><subscriber><id>00cd69d02edd246467628f40</id><credential>
<networkId></networkId><password></password></credential><credential><networkId> 
]]></networkId><type>Called-Station-Id</type></credential><service><code>Plan0</code><enabled>true</enabled>
</service><status>ACTIVE</status><avp><code>Called-Station-Id</code><value>IN001_3300424</value></avp><avp><code>CIRCLE_CODE
</code><value>DL</value></avp><avp><code>PINCODE</code><value>395004</value></avp><avp><code>SprKeyHash</code><value>2</value>
</avp><version>0</version>
</subscriber></GetSubscriberResponse></se:Body></se:Envelope>

UpdateSubscriberRequest

This API updates a subscriber. An entire subscriber object must be sent. This request also updates credentials.

It also allows provisioning initial quota/balance using the CreateBalance element.

Note

The proper steps to use this API:

Call GetSubscriber API to get the subscriber object.
Update returned subscriber object as required.
Call UpdateSubscriber API with updated subscriber object.

Schema:

<UpdateSubscriberRequest>
<audit> AuditType </audit> [0..1] ?
<subscriber> SubscriberType </subscriber> [1] ?
</UpdateSubscriberRequest>

Example:

curl -k -X POST "https://pcf.unified-api.203.0.113.1.nip.io/apirouter" \
     -H "Content-Type: text/xml; charset=utf-8" \
     -H "SOAPAction: \"http://broadhop.com/unifiedapi/soap/types/UpdateSubscriberRequest\"" \
     -d '<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:typ="http://broadhop.com/unifiedapi/soap/types">
   <soapenv:Header/>
   <soapenv:Body>
      <typ:UpdateSubscriberRequest>
         <subscriber>
                  <id>001000001ca50459681090ee</id>
                  <name>
                     <fullName>uniqueidentifier</fullName>
                  </name>
                  <credential>
                     <networkId>uniqueidentifier</networkId>
                     <password>password</password>
                  </credential>
                  <service>
                     <code>Plan0-FTTX</code>
                     <enabled>true</enabled>
                  </service>
                  <status>ACTIVE</status>
                  <avp>
                     <code>CIRCLE_CODE</code>
                     <value>WB</value>
                  </avp>
                  <version>0</version>
               </subscriber>
     </typ:UpdateSubscriberRequest>
   </soapenv:Body>
</soapenv:Envelope>'

Note

This existing UpdateSubscriberRequest is used in a new Dual-Write Proxy logic. The UpdateSubscriber logic is enhanced to require specific <id> and <version> injection for data consistency.

UpdateSubscriberResponse

Schema

<UpdateSubscriberResponse>
			<errorCode> xsd:integer (0 >= value < 1000) </errorCode> [1] ?
			<errorMessage> xsd:string </errorMessage> [1] ?
</UpdateSubscriberResponse>

Example


<se:Envelope xmlns:se="http://schemas.xmlsoap.org/soap/envelope/">
  <se:Body>
    <UpdateSubscriberResponse xmlns="http://broadhop.com/unifiedapi/soap/types">
      <errorCode>0</errorCode>
      <errorMessage>Request completed successfully</errorMessage>
    </UpdateSubscriberResponse>
  </se:Body>
</se:Envelope>

DeleteSubscriberRequest

This API deletes a subscriber from the USuM database.

Note

Renamed

The API has been renamed. It is DeleteSubscriberByKey in v1.0 API.

Schema

<DeleteSubscriberRequest>
			<audit> AuditType </audit> [0..1] ?
			<networkId> xsd:string </networkId> [1] ?
			<hardDelete> xsd:boolean </hardDelete> [0..1] ?
</DeleteSubscriberRequest>

Example

curl -k -X POST "https://pcf.unified-api.203.0.113.1.nip.io/apirouter" \
     -H "Content-Type: text/xml; charset=utf-8" \
     -H "SOAPAction: \"http://broadhop.com/unifiedapi/soap/types/DeleteSubscriberRequest\"" \
     -d '<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:typ="http://broadhop.com/unifiedapi/soap/types">
   <soapenv:Header/>
   <soapenv:Body>
      <typ:DeleteSubscriberRequest>
         <networkId>uniqueidentifier</networkId>
         <hardDelete>true</hardDelete>
      </typ:DeleteSubscriberRequest>
   </soapenv:Body>
</soapenv:Envelope>'

DeleteSubscriberResponse

Schema

<DeleteSubscriberResponse>
			<errorCode> xsd:integer (0 >= value < 1000) </errorCode> [1] ?
			<errorMessage> xsd:string </errorMessage> [1] ?
</DeleteSubscriberResponse>

Example

<se:Envelope xmlns:se="http://schemas.xmlsoap.org/soap/envelope/">
  <se:Body>
    <DeleteSubscriberResponse xmlns="http://broadhop.com/unifiedapi/soap/types">
      <errorCode>0</errorCode>
      <errorMessage>Request completed successfully</errorMessage>
    </DeleteSubscriberResponse>
  </se:Body>
</se:Envelope>

Bulk API Request

CreateBulkSubscribersRequest

The CreateBulkSubscribers API enables the creation of multiple subscribers in one request. It includes subscriber details like credentials and services, ensuring correct provisioning.

Schema:

<CreateBulkSubscribersRequest>
<audit> AuditType </audit> [0..1] ?
<subscriber> SubscriberType </subscriber> [1..1000]
</CreateBulkSubscribersRequest>

Example:

curl -k -X POST "https://pcf.unified-api.203.0.113.1.nip.io/apirouter" \
     -H "Content-Type: text/xml; charset=utf-8" \
     -H "SOAPAction: \"http://broadhop.com/unifiedapi/soap/types/CreateBulkSubscribersRequest\"" \
     -d '<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:typ="http://broadhop.com/unifiedapi/soap/types">
   <soapenv:Header/>
   <soapenv:Body>
      <typ:CreateBulkSubscribersRequest>
         <subscriber>
        <name>
            <fullName>uniqueIdentifier</fullName>
        </name>
        <credential>
            <networkId>uniqueIdentifier</networkId>
            <password>password</password>
        </credential>
        <service>
            <code>Plan0</code>
            <enabled>true</enabled>
        </service>
        <avp>
            <code>Called-Station-Id</code>
            <value>LaasUser_31</value>
        </avp>
        <avp>
            <code>CIRCLE_CODE</code>
            <value>WB</value>
        </avp>
        <avp>
            <code>PINCODE</code>
            <value>405061</value>
        </avp>
        <status>ACTIVE</status>
    </subscriber>
    <subscriber>
        <name>
            <fullName>uniqueIdentifier</fullName>
        </name>
        <credential>
            <networkId>uniqueIdentifier</networkId>
            <password>password</password>
        </credential>
        <service>
            <code>Plan0</code>
            <enabled>true</enabled>
        </service>
        <avp>
            <code>Called-Station-Id</code>
            <value>LaasUser_32</value>
        </avp>
        <avp>
            <code>CIRCLE_CODE</code>
            <value>WB</value>
        </avp>
        <avp>
            <code>PINCODE</code>
            <value>405061</value>
        </avp>
        <status>ACTIVE</status>
    </subscriber>
    <subscriber>
        <name>
            <fullName>uniqueIdentifier</fullName>
        </name>
        <credential>
            <networkId>uniqueIdentifier</networkId>
            <password>password</password>
        </credential>
        <service>
            <code>Plan0</code>
            <enabled>true</enabled>
        </service>
        <avp>
            <code>Called-Station-Id</code>
            <value>LaasUser_33</value>
        </avp>
        <avp>
            <code>CIRCLE_CODE</code>
            <value>WB</value>
        </avp>
        <avp>
            <code>PINCODE</code>
            <value>405061</value>
        </avp>
        <status>ACTIVE</status>
    </subscriber>
      </typ:CreateBulkSubscribersRequest>
   </soapenv:Body>
</soapenv:Envelope>'

CreateBulkSubscribersResponse

Schema:

<CreateBulkSubscribersResponse>
<errorCode> xsd:integer (0 >= value < 1000) </errorCode> [1] ?
<errorMessage> xsd:string </errorMessage> [1] ?
</CreateBulkSubscribersResponse>

Example:

 <se:Envelope xmlns:se="http://schemas.xmlsoap.org/soap/envelope/">
   <se:Body>
      <list>
         <CreateBulkSubscribersResponse xmlns="http://broadhop.com/unifiedapi/soap/types">
            <errorCode>0</errorCode>
            <errorMessage>Request completed successfully</errorMessage>
         </CreateBulkSubscribersResponse>
         <CreateBulkSubscribersResponse xmlns="http://broadhop.com/unifiedapi/soap/types">
            <errorCode>0</errorCode>
            <errorMessage>Request completed successfully</errorMessage>
         </CreateBulkSubscribersResponse>
         <CreateBulkSubscribersResponse xmlns="http://broadhop.com/unifiedapi/soap/types">
            <errorCode>0</errorCode>
            <errorMessage>Request completed successfully</errorMessage>
         </CreateBulkSubscribersResponse>
      </list>
   </se:Body>
</se:Envelope>

GetSubscribersRequest

The GetSubscribers API retrieves subscriber details based on specified network IDs. It allows for querying multiple subscribers in a single request to access the information.

Schema:

<GetSubscribersRequest>
<audit> AuditType </audit> [0..1] ?
<networkId> xsd:string </networkId> [1..1000] ?
<returnSessions> xsd:boolean </returnSessions> [0..1] ?
<includeExpiredData> xsd:boolean </includeExpiredData> [0..1] ?
<excludeReservationsFromCreditTotal> xsd:boolean </excludeReservationsFromCreditTotal>
[0..1] ?
</GetSubscribersRequest>

Example:

curl -k -X POST "https://pcf.unified-api.203.0.113.1.nip.io/apirouter" \
     -H "Content-Type: text/xml; charset=utf-8" \
     -H "SOAPAction: \"http://broadhop.com/unifiedapi/soap/types/GetSubscribersRequest\"" \
     -d '<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:typ="http://broadhop.com/unifiedapi/soap/types">
   <soapenv:Header/>
   <soapenv:Body>
      <typ:GetSubscribersRequest>
         <typ:networkId>SVI_Subscriber_3300422</typ:networkId>
         <typ:networkId>SVI_Subscriber_3300423</typ:networkId>
         <typ:networkId>SVI_Subscriber_3300424</typ:networkId>
      </typ:GetSubscribersRequest>
   </soapenv:Body>
</soapenv:Envelope>'

GetSubscribersResponse

Schema:


<GetSubscribersResponse>
<errorCode> xsd:integer (0 >= value < 1000) </errorCode> [1] ?
<errorMessage> xsd:string </errorMessage> [1] ?
<subscriber> SubscriberType </subscriber> [1..1000]
</GetSubscribersResponse>

Example:

<se:Envelope xmlns:se="http://schemas.xmlsoap.org/soap/envelope/"><se:Body><list>
<GetSubscribersResponse xmlns="http://broadhop.com/unifiedapi/soap/types"><errorCode>
0</errorCode><errorMessage>Request completed successfully</errorMessage><subscriber>
<subscriber><id>00d69c018cab7b49680ab385</id><credential><networkId>
<![CDATA[SVI_Subscriber_3300422]]></networkId><password><![CDATA[{SSHA}
Yk6GaDy0tor24AigH7tS4FirGPY/PwE/Pz91Pw==]]>
</password></credential><credential><networkId><![CDATA[INJKNORAXXXXTW0013ENBESR001_3300422]]>
</networkId><type>Called-Station-Id</type></credential><service>
<code>Plan0</code><enabled>true</enabled>
</service><status>ACTIVE</status><avp><code>Called-Station-Id</code>
<value>INJKNORAXXXXTW0013ENBESR001_3300422</value></avp><avp>
<code>CIRCLE_CODE</code><value>DL</value>
</avp><avp><code>PINCODE</code><value>385006</value></avp><avp><code>SprKeyHash</code><value>1</value>
</avp><version>0</version></subscriber><subscriber><id>00e69c018cab7b49680ab385</id><credential><networkId>
<![CDATA[SVI_Subscriber_3300423]]></networkId><password><![CDATA[{SSHA}a6CJLxyyf2h2KZmzgWxCehNixGRIV0gTP3c/Pw==]]>
</password></credential><credential><networkId><![CDATA[INJKNORAXXXXTW0013ENBESR001_3300423]]>
</networkId><type>Called-Station-Id</type></credential><service><code>Plan0</code><enabled>true</enabled></service>
<status>ACTIVE</status><avp><code>Called-Station-Id</code><value>INJKNORAXXXXTW0013ENBESR001_3300423</value></avp>
<avp><code>CIRCLE_CODE</code><value>KO</value></avp><avp><code>PINCODE</code><value>385007</value></avp><avp><code>
SprKeyHash</code><value>0</value></avp><version>0</version></subscriber><subscriber><id>00d69c01e2171601680ab385
</id><credential><networkId><![CDATA[SVI_Subscriber_3300424]]></networkId><password>
<![CDATA[{SSHA}qFkpMzgCrSyVepwSOitG5JnEMDczOj90Pz9XPw==]]></password></credential><credential><networkId>
<![CDATA[INJKNORAXXXXTW0013ENBESR001_3300424]]></networkId><type>Called-Station-Id</type></credential><service>
<code>Plan0</code><enabled>true</enabled></service><status>ACTIVE</status><avp><code>Called-Station-Id</code>
<value>INJKNORAXXXXTW0013ENBESR001_3300424</value></avp><avp><code>CIRCLE_CODE</code><value>AP</value></avp><avp>
<code>PINCODE</code><value>385008</value></avp><avp><code>SprKeyHash</code><value>2</value></avp><version>0</version>
</subscriber><subscriber><id>00f69c01e2171601680ab385</id><credential><networkId></GetSubscribersResponse></list>
</se:Body></se:Envelope>

UpdateSubscribersRequest

The UpdateSubscribers API modifies subscriber details, including credentials and services, for active subscribers in the system. It ensures updates are reflected in the subscriber database.

Schema:


<UpdateSubscribersRequest>
<audit> AuditType </audit> [0..1] ?
<subscriber> SubscriberType </subscriber> [1..1000] ?
</UpdateSubscribersRequest>

Example:

curl -k -X POST "https://pcf.unified-api.203.0.113.1.nip.io/apirouter" \
     -H "Content-Type: text/xml; charset=utf-8" \
     -H "SOAPAction: \"http://broadhop.com/unifiedapi/soap/types/UpdateSubscribersRequest\"" \
     -d '<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:typ="http://broadhop.com/unifiedapi/soap/types">
   <soapenv:Header/>
   <soapenv:Body>
      <typ:UpdateSubscribersRequest>
         <subscriber>
                  <id>00200000602b083e680f3b6f</id>
                  <name>
                     <fullName>uniqueIdentifier</fullName>
                  </name>
                  <credential>
                     <networkId>uniqueIdentifier</networkId>
                     <password>password</password>
                  </credential>
                  <service>
                     <code>Plan0-FTTX</code>
                     <enabled>true</enabled>
                  </service>
                  <status>ACTIVE</status>
                  <avp>
                     <code>CIRCLE_CODE</code>
                     <value>MU</value>
                  </avp>
                  <avp>
                     <code>SprKeyHash</code>
                     <value>0</value>
                  </avp>
                  <version>0</version>
               </subscriber>
          <subscriber>
                  <id>00300000602b083e680f3b6f</id>
                  <name>
                     <fullName>uniqueIdentifier</fullName>
                  </name>
                  <credential>
                     <networkId>uniqueIdentifier</networkId>
                     <password>password</password>
                  </credential>
                  <service>
                     <code>Plan0-FTTX</code>
                     <enabled>true</enabled>
                  </service>
                  <status>ACTIVE</status>
                  <avp>
                     <code>CIRCLE_CODE</code>
                     <value>MU</value>
                  </avp>
                  <avp>
                     <code>SprKeyHash</code>
                     <value>1</value>
                  </avp>
                  <version>0</version>
               </subscriber>
          <subscriber>
                  <id>0010000065805166680f3bde</id>
                  <name>
                     <fullName>uniqueIdentifier</fullName>
                  </name>
                  <credential>
                     <networkId>uniqueIdentifier</networkId>
                     <password>password</password>
                  </credential>
                  <service>
                     <code>Plan0-FTTX</code>
                     <enabled>true</enabled>
                  </service>
                  <status>ACTIVE</status>
                  <avp>
                     <code>CIRCLE_CODE</code>
                     <value>MU</value>
                  </avp>
                  <avp>
                     <code>SprKeyHash</code>
                     <value>2</value>
                  </avp>
                  <version>0</version>
               </subscriber>
                </typ:UpdateSubscribersRequest>
   </soapenv:Body>
</soapenv:Envelope>'

UpdateSubscribersResponse

Schema:

<UpdateSubscribersResponse>
<errorCode> xsd:integer (0 >= value < 1000) </errorCode> [1] ?
<errorMessage> xsd:string </errorMessage> [1] ?
</UpdateSubscribersResponse>

Example:

<se:Envelope xmlns:se="http://schemas.xmlsoap.org/soap/envelope/">
   <se:Body>
      <list>
         <UpdateSubscribersResponse xmlns="http://broadhop.com/unifiedapi/soap/types">
            <errorCode>0</errorCode>
            <errorMessage>Request completed successfully</errorMessage>
         </UpdateSubscribersResponse>
         <UpdateSubscribersResponse xmlns="http://broadhop.com/unifiedapi/soap/types">
            <errorCode>0</errorCode>
            <errorMessage>Request completed successfully</errorMessage>
         </UpdateSubscribersResponse>
         <UpdateSubscribersResponse xmlns="http://broadhop.com/unifiedapi/soap/types">
            <errorCode>0</errorCode>
            <errorMessage>Request completed successfully</errorMessage>
         </UpdateSubscribersResponse>
      </list>
   </se:Body>
</se:Envelope>

DeleteSubscribersRequest

The DeleteSubscribers API removes subscribers from the system based on specified network IDs. It supports hard deletions, offering flexible option for managing subscriber data.

Schema:

<DeleteSubscribersRequest>
<audit> AuditType </audit> [0..1] ?
<networkId> xsd:string </networkId> [1..1000] ?
<hardDelete> xsd:boolean </hardDelete> [0..1] ?
</DeleteSubscribersRequest>

Example:

curl -k -X POST "https://pcf.unified-api.203.0.113.1.nip.io/apirouter" \
     -H "Content-Type: text/xml; charset=utf-8" \
     -H "SOAPAction: \"http://broadhop.com/unifiedapi/soap/types/DeleteSubscribersRequest\"" \
     -d '<?xml version="1.0" encoding="UTF-8"?>
<soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:typ="http://broadhop.com/unifiedapi/soap/types">
   <soapenv:Header/>
   <soapenv:Body>
      <typ:DeleteSubscribersRequest>
         <networkId>uniqueidentifier</networkId>
         <networkId>uniqueidentifier</networkId>
         <networkId>uniqueidentifier</networkId>
         <hardDelete>true</hardDelete>
      </typ:DeleteSubscribersRequest>
   </soapenv:Body>
</soapenv:Envelope>'

DeleteSubscribersResponse

Schema:

<DeleteSubscribersResponse>
<errorCode> xsd:integer (0 >= value < 1000) </errorCode> [1] ?
<errorMessage> xsd:string </errorMessage> [1] ?
</DeleteSubscribersResponse>

Example:

<se:Envelope xmlns:se="http://schemas.xmlsoap.org/soap/envelope/">
   <se:Body>
      <list>
         <DeleteSubscribersResponse xmlns="http://broadhop.com/unifiedapi/soap/types">
            <errorCode>0</errorCode>
            <errorMessage>Request completed successfully</errorMessage>
         </DeleteSubscribersResponse>
         <DeleteSubscribersResponse xmlns="http://broadhop.com/unifiedapi/soap/types">
            <errorCode>0</errorCode>
            <errorMessage>Request completed successfully</errorMessage>
         </DeleteSubscribersResponse>
         <DeleteSubscribersResponse xmlns="http://broadhop.com/unifiedapi/soap/types">
            <errorCode>0</errorCode>
            <errorMessage>Request completed successfully</errorMessage>
         </DeleteSubscribersResponse>
      </list>
   </se:Body>
</se:Envelope>

Refresh profile API implementation in cnAAA

RefreshSubscriberProfileRequest

The Refresh Profile API in cnAAA accepts a mac-address. This API triggers the policy engine. The policy engine queries the SPR, fetches the subscriber record, and processes CoA if the session is available in CDL.

Schema:

<RefreshSubscriberProfileRequest>
	<audit> AuditType </audit> [0..1] ?
	<networkId> xsd:string </networkId> [1] ?
</RefreshSubscriberProfileRequest>

Example:

<?xml version="1.0" encoding="UTF-8"?>
<se:Envelope xmlns:se="http://schemas.xmlsoap.org/soap/envelope/">
<se:Body><RefreshSubscriberProfileRequest xmlns="http://broadhop.com/unifiedapi/soap/types">
	<networkId>uniqueidentifier</networkId>
</RefreshSubscriberProfileRequest>
</se:Body>
</se:Envelope>

RefreshSubscriberProfileResponse

Schema:

<RefreshSubscriberProfileResponse>
	<errorCode> xsd:integer (0 >= value < 1000) </errorCode> [1] ?
	<errorMessage> xsd:string </errorMessage> [1] ?
</RefreshSubscriberProfileResponse>

Example:

<se:Envelope xmlns:se="http://schemas.xmlsoap.org/soap/envelope/">
<se:Body>
<RefreshSubscriberProfileResponse>
	<errorCode>0</errorCode>
	<errorMessage>Request completed successfully</errorMessage>
	<sessionId>192.168.175.148:00012</sessionId>
	<sessionId>192.168.175.148:00013</sessionId>
	<sessionId>192.168.175.148:00014</sessionId>
</RefreshSubscriberProfileResponse>
</se:Body>
</se:Envelope>

Delete session API implementation in cnAAA

The Delete Session API in cnAAA accepts a mac-address. This API triggers the policy engine to delete the CDL sessions of that subscriber.

DeleteSubscriberSessionRequest

Schema:

<DeleteSubscriberSessionRequest>
	<networkId> xsd:string </networkId> [1] ?
	<subscriberId> xsd:string </subscriberId> [1] ?
</DeleteSubscriberSessionRequest>

Example:

<?xml version="1.0" encoding="UTF-8"?>
<se:Envelope xmlns:se="http://schemas.xmlsoap.org/soap/envelope/">
<se:Body>
<DeleteSubscriberSessionRequest xmlns="http://broadhop.com/unifiedapi/soap/types">
	<networkId>uniqueidentifier</networkId>
	<subscriberId>00c5000042e99b6068bed7ce</subscriberId>
</DeleteSubscriberSessionRequest>
</se:Body>
</se:Envelope>

DeleteSubscriberSessionResponse

Schema:

<DeleteSubscriberSessionResponse>
	<errorCode> xsd:integer (0 >= value < 1000) </errorCode> [1] ?
	<errorMessage> xsd:string </errorMessage> [1] ?
</DeleteSubscriberSessionResponse>

Example:

<se:Envelope xmlns:se="http://schemas.xmlsoap.org/soap/envelope/">
<se:Body>
<DeleteSubscriberSessionResponse xmlns="http://broadhop.com/unifiedapi/soap/types">
<errorCode>0</errorCode>
<errorMessage>Request completed successfully</errorMessage>
<sessionCount>3</sessionCount>
<sessionId>192.168.175.148:00012</sessionId>
<sessionId>192.168.175.148:00013</sessionId>
<sessionId>192.168.175.148:00014</sessionId>
</DeleteSubscriberSessionResponse>
</se:Body>
</se:Envelope>

Bias-Free Language

Book Title

Requests, Responses, and Schema

Results

Chapter: Requests, Responses, and Schema

Requests, Responses, and Schema

API Requests and Responses

Single API Request

CreateSubscriberRequest

CreateSubscriberResponse

GetSubscriberRequest

GetSubscriberResponse

UpdateSubscriberRequest

UpdateSubscriberResponse

DeleteSubscriberRequest

DeleteSubscriberResponse

Bulk API Request

CreateBulkSubscribersRequest

CreateBulkSubscribersResponse

GetSubscribersRequest

GetSubscribersResponse

UpdateSubscribersRequest

UpdateSubscribersResponse

DeleteSubscribersRequest

DeleteSubscribersResponse

Refresh profile API implementation in cnAAA

Delete session API implementation in cnAAA

Was this Document Helpful?

Contact Cisco