Release Notes for Cisco Wireless Controllers and Lightweight Access Points, Cisco Wireless Release 8.2.151.0

---

---

Table 1 Revision History

Modification Date	Modification Details
January 29, 2018	Features Not Supported on Cisco Virtual WLCs – Modified information about FlexConnect central switching.
October 16, 2017	Features Not Supported on Cisco Aironet 1810 OEAP, 1810W, 1830, 1850, 2800, and 3800 Series APs – Added SIP snooping with FlexConnect in local switching mode
October 10, 2017	Features Not Supported on Cisco Virtual WLCs – Added Wired Guest and FlexConnect central switching.
April 19, 2017	Resolved Caveats – Added CSCvc32590 and CSCvc87146.
April 10, 2017	What’s New in this Release – Added information about change in functionality of CPU ACL.

Cisco Wireless Controller and Cisco Lightweight Access Point Platforms

The section contains the following subsections:

• Supported Cisco Wireless Controller Platforms
• Supported Access Point Platforms

Supported Cisco Wireless Controller Platforms

The following Cisco WLC platforms are supported in this release:

• Cisco 2500 Series Wireless Controllers (Cisco 2504 Wireless Controller)
• Cisco 5500 Series Wireless Controllers (5508 and 5520 Wireless Controllers)
• Cisco Flex 7500 Series Wireless Controllers (Cisco Flex 7510 Wireless Controller)
• Cisco 8500 Series Wireless Controllers (8510 and 8540 Wireless Controllers)
• Cisco Virtual Wireless Controllers on the Cisco Services-Ready Engine (Cisco SRE) or the Cisco Wireless LAN Controller Module for Cisco Integrated Services Routers G2 (UCS-E)

---

Note Kernel-based virtual machine (KVM) is supported in Cisco Wireless Release 8.1 and later releases.

After KVM is deployed, we recommend that you do not downgrade to a Cisco Wireless release that is earlier than Release 8.1.

• Cisco Wireless Controllers for High Availability for Cisco 2504 WLC, Cisco 5508 WLC, Cisco 5520 WLC, Cisco Wireless Services Module 2 (Cisco WiSM2), Cisco Flex 7510 WLC, Cisco 8510 WLC, and Cisco 8540 WLC.

---

Note AP Stateful switchover (SSO) is not supported on Cisco 2504 WLCs.

• Cisco WiSM2 for Catalyst 6500 Series Switches
• Cisco Mobility Express Solution

For information about features that are not supported on the Cisco WLC platforms, see “Features Not Supported on Cisco WLC Platforms” section.

Supported Access Point Platforms

The following access point platforms are supported in this release:

• Cisco Aironet 1040 Series Access Points
• Cisco Aironet 1140 Series Access Points
• Cisco Aironet 1260 Series Access Points
• Cisco Aironet 1600 Series Access Points
• Cisco Aironet 1700 Series Access Points
• Cisco Aironet 1810 Series OfficeExtend Access Points
• Cisco Aironet 1810W Series Access Points
• Cisco Aironet 1830 Series Access Points
• Cisco Aironet 1850 Series Access Points
• Cisco Aironet 2600 Series Access Points
• Cisco Aironet 2700 Series Access Points
• Cisco Aironet 2800 Series Access Points
• Cisco Aironet 3500 Series Access Points
• Cisco Aironet 3600 Series Access Points
• Cisco Aironet 3700 Series Access Points
• Cisco Aironet 3800 Series Access Points
• Cisco Aironet 600 Series OfficeExtend Access Points
• Cisco Aironet 700 Series Access Points
• Cisco Aironet 700W Series Access Points
• Cisco AP802 Integrated Access Point
• Cisco AP803 Integrated Access Point
• Cisco ASA 5506W-AP702
• Cisco Aironet 1530 Series Access Points
• Cisco Aironet 1550 Series Access Points
• Cisco Aironet 1570 Series Access Points
• Cisco Industrial Wireless 3700 Series Access Points

---

Note The Cisco 1040 Series, 1140 Series, and 1260 Series access points have feature parity with Cisco Wireless Release 8.0. Features introduced in Cisco Wireless Release 8.1 and later are not supported on these access points.

---

Note Cisco AP802 and AP803 are integrated access points on the Cisco 800 Series Integrated Services Routers (ISRs). For more information about the stock-keeping units (SKUs) for the AP802s and AP803s Cisco ISRs, see http://www.cisco.com/c/en/us/products/routers/800-series-routers/brochure-listing.html. Before you use a Cisco AP802 series lightweight access point with Cisco Wireless Release 8.2.151.0, you must upgrade the software in the Cisco 800 Series ISRs to Cisco IOS 15.1(4)M or later releases.

---

Note For information about features that are not supported on some access point platforms, see the “Features Not Supported on Cisco Access Point Platforms” section.

---

Note For information about Cisco Wireless software releases that support specific Cisco access point modules, see the Software Release Support for Specific Access Point Modules section in the Cisco Wireless Solutions Software Compatibility Matrix document.

Temporal Key Integrity Protocol (TKIP) Support

The TKIP security protocol option support is now extended to the following Cisco APs:

• Cisco Aironet 1810 Series APs
• Cisco Aironet 1830 Series APs
• Cisco Aironet 1850 Series APs
• Cisco Aironet 2800 Series APs
• Cisco Aironet 3800 Series APs

The following supported TKIP security protocol combination table is applicable to the above listed Cisco Wave2 APs only. The legacy APs continue to support the protocols without any change in this release.

For more information about this feature, see WPA1 and WPA2 section in the Cisco Wireless Controller Configuration Guide.

Change in Functionality of CPU ACL

The functionality of CPU ACL is changed as follows:

• Prior to this release: A permit statement in one direction (from client to Cisco WLC) also permitted traffic in the return direction (from Cisco WLC to client).
• From this release: CPU must be changed to have explicit permit statements in both the directions.

Table 3 Release Types

Release Type	Description	Benefit
Maintenance Deployment (MD) releases	Software releases that provide bug-fix support and ongoing software maintenance. These releases are categorized as Maintenance Deployment (MD) and may be part of the AssureWave program.1 These are releases with long life and ongoing software maintenance.	Provides you with a software release that offers stability and long support duration with periodic maintenance releases (MRs).
Early Deployment (ED) releases	Software releases that provide new features and new hardware platform support in addition to bug fixes. These releases are categorized as Early Deployment (ED). These are short-lived releases.	Allows you to deploy the latest features and new hardware platforms or modules.

Guidelines and Limitations

• In previous software versions, it was possible to enable 802.11r Fast Transition (FT) on a WLAN without WPA/WPA2 authentication. This behavior has been corrected in this release. However, if you have the FT parameters enabled on a non-WPA/WPA2 WLAN prior to your upgrade, you may find that the WLAN is subsequently disabled after the upgrade. WLAN cannot be enabled until you disable the FT parameters.
• WLAN-AP group association functionality:

– Functionality prior to Release 7.4.130.0—If a WLAN was added to an AP group prior to Release 7.4.130.0, the RF radio policy is set to All after an XML upload/download. This is because the default value of RF policy was not added. This issue was addressed through CSCud37443. However, this corrects only the newly created WLAN-AP group associations and not the previous ones. Therefore, if you have configured a WLAN-AP group association prior to Release 7.4.130.0, you must remove the WLAN from the AP group and add it again in Release 7.4.130.0 or a later release.

Also, the XML configuration for radio policy was not present in releases prior to 8.0. This issue is addressed through CSCul59089.

– Change in functionality with Release 7.4.130.0—The RF radio policy is by default set to None for all WLAN-AP group associations created in Release 7.4.130.0. Any previous WLAN-AP group associations that are carried over will continue to be set to All unless a WLAN is removed from the AP group and added again.

The XML upload/download for AP group RF radio policy is available only from Release 8.0.

• When you change the WLAN profile name, then FlexConnect APs (using AP-specific VLAN mapping) will become WLAN-specific. If FlexConnect Groups are properly configured, the VLAN mapping will become Group-specific.
• After upgrading to Release 8.2, the Cisco WLC might lose all IPv4 connectivity. The Cisco WLC can no longer service incoming SSH/Web sessions and is unable to ping other IPv4 stations. However, the default router is able to ping the Cisco WLC’s management interface.

Every 10 seconds, a message similar to the following is sent to the msglog:

This occurs in the following conditions:

a. LAG is not configured.

b. The management interface is untagged and is mapped to one physical port.

c. When an untagged dynamic interface is added and mapped to port 2, the default route for the management interface is lost.

The workaround is to configure all interfaces with VLANs.

---

Note In Release 8.2, it is not possible to have multiple untagged interfaces; however, this issue is resolved in Release 8.3. You can track this issue via CSCux75436.

• Effective with Release 8.2.100.0, you cannot download some of the older configurations from the Cisco WLC because of the Multicast and IP address validations introduced in this release. The platform support for global multicast and multicast mode are listed in the following table.

 

 

• To enable all CLI commands on IOS APs, enter the hidden command debug capwap console cli command.
• Cisco WLC Release 7.3.112.0, which is configured for new mobility, might revert to old mobility after upgrading to Release 7.6, even though Release 7.6 supports new mobility. This issue occurs when new mobility, which is compatible with the Cisco 5760 Wireless LAN Controller and the Cisco Catalyst 3850 Series Switch, are in use. However, old mobility is not affected.

The workaround is as follows:

a. Enter the following commands:

b. After the reboot, press Esc on the console, and use the boot menu to select Release 7.6.

c. After booting on Release 7.6, set back the primary boot, and save the configuration by entering the following command:

config boot primary

---

Note The epings are not available in the Cisco 5500 Series WLC when New Mobility is enabled.

---

Note If you downgrade from a Cisco WLC release that supports new mobility to a Cisco WLC release that does not support new mobility, for example, Cisco Wireless Release 7.6 to Release 7.3.x and you download the 7.6 configuration file with new mobility in enabled state, the release that does not support new mobility will have the new mobility feature in enabled state.

• If you downgrade from Release 8.2.151.0 to a 7.x release, the trap configuration is lost and must be reconfigured.
• If you upgrade from Release 8.0.110.0 to a later release, the config redundancy mobilitymac mac-addr command's setting is removed. You must manually reconfigure the mobility MAC address after the upgrade.
• If you are upgrading from Release 8.0.140.0 or 8.0.15x.0 to a later release and also have the multiple country code feature configured, the feature configuration is corrupted after the upgrade. For more information, see CSCve41740.
• If you have ACL configurations in a Cisco WLC, and downgrade from a 7.4 or later release to a 7.3 or earlier release, you might experience XML errors on rebooting the Cisco WLC. However, these errors do not have any impact on any of the functionalities or configurations.
• If you are upgrading from a 7.4.x or earlier release to a release later than 7.4, the Called Station ID type information is mapped to the RADIUS Accounting Called Station ID type; which, by default, is set to apradio-mac-ssid. You can configure the RADIUS Authentication Called Station ID type information by using the config radius auth callStationIdType command.
• When FlexConnect APs (known as H-REAP APs in the 7.0.x releases) that are associated with a Cisco WLC that has all the 7.0.x software releases prior to Release 7.0.240.0, upgrade to Release 8.2.151.0, the APs lose the enabled VLAN support configuration. The VLAN mappings revert to the default values of the VLAN of the associated interface. The workaround is to upgrade from Release 7.0.240.0 and later 7.0.x releases to Release 8.2.151.0.

---

Note In case of FlexConnect VLAN mapping deployment, we recommend that the deployment be done using FlexConnect groups. This allows you to recover VLAN mapping after an AP rejoins the Cisco WLC without having to manually reassign the VLAN mappings.

• When a client sends an HTTP request, the Cisco WLC intercepts it for redirection to the login page. If the HTTP GET request that is intercepted by the Cisco WLC is longer than 2000 bytes, the Cisco WLC drops the packet. Track CSCuy81133 for a possible enhancement to address this restriction.
• We recommend that you install the recommended Cisco Wireless LAN Controller Field Upgrade Software (FUS) listed in Table 5 , which is a special AES package that contains several system-related component upgrades. These include the bootloader, field recovery image, and FPGA/MCU firmware. Installing the FUS image requires special attention because it installs some critical firmware. The FUS image is independent of the runtime image. For more information, see http://www.cisco.com/c/en/us/td/docs/wireless/controller/release/notes/fus_rn_OL-31390-01.html.

---

Note The FUS image installation process reboots the Cisco WLC several times and reboots the runtime image. The entire process takes approximately 30 minutes. We recommend that you install the FUS image in a planned outage window.

---

Note If you are using a Cisco 2500 Series controller and you intend to use the Application Visibility and Control (AVC) and NetFlow protocol features, you must install Release 1.9.0.0 of Cisco Wireless LAN Controller FUS. This is not required if you are using other controller hardware models.

• After you upgrade to Release 7.4, networks that were not affected by the existing preauthentication access control lists might not work because the rules are now enforced. That is, networks with clients configured with static DNS servers might not work unless the static server is defined in the preauthentication ACL.
• On the Cisco Flex 7500 Series WLCs, if FIPS is enabled, the reduced boot options are displayed only after a bootloader upgrade.

---

Note Bootloader upgrade is not required if FIPS is disabled.

• If you have to downgrade from one release to another, you might lose the configuration from your current release. The workaround is to reload the previous Cisco WLC configuration files saved on the backup server, or to reconfigure the Cisco WLC.
• It is not possible to directly upgrade to Release 8.2.151.0 release from a release that is earlier than Release 7.0.98.0.
• You can upgrade or downgrade the Cisco WLC software only between certain releases. In some instances, you must first install an intermediate release prior to upgrading to Release 8.2.151.0. Table 6 shows the upgrade path that you must follow before downloading Release 8.2.151.0.

---

 

• When you upgrade the Cisco WLC to an intermediate software release, you must wait until all of the access points that are associated with the Cisco WLC are upgraded to the intermediate release before you install the latest Cisco WLC software. In large networks, it can take some time to download the software on each access point.
• When you upgrade to the latest software release, the software on the access points associated with the Cisco WLC is also automatically upgraded. When an access point is loading software, each of its LEDs blinks in succession.
• We recommend that you access the Cisco WLC GUI using Microsoft Internet Explorer 10 or a later version or Mozilla Firefox 32 or a later version.

---

Note Microsoft Internet Explorer 8 might fail to connect over HTTPS because of compatibility issues. In such cases, you can explicitly enable SSLv3 by entering the config network secureweb sslv3 enable command.

• Cisco WLCs support standard SNMP MIB files. MIBs can be downloaded from the Software Center on Cisco.com.
• Ensure that you have a TFTP, FTP, or SFTP server available for the software upgrade. Follow these guidelines when setting up a server:

– Ensure that your TFTP server supports files that are larger than the size of Cisco WLC software Release 8.2.151.0. Some TFTP servers that support files of this size are tftpd32 and the TFTP server within the Prime Infrastructure. If you attempt to download the 8.2.151.0 Cisco WLC software and your TFTP server does not support files of this size, the following error message appears:

• When you plug a Cisco WLC into an AC power source, the bootup script and power-on self test is run to initialize the system. During this time, press Esc to display the bootloader Boot Options menu. The menu options for the Cisco 5500 Series WLC differ from the menu options for the other Cisco WLC platforms.

Bootloader menu for Cisco 5500 Series WLC:

Bootloader menu for other Cisco WLC platforms:

Enter 1 to run the current software, enter 2 to run the previous software, enter 4 (on Cisco 5500 Series WLC), or enter 5 (on Cisco WLC platforms other than 5500 series) to run the current software and set the Cisco WLC configuration to factory defaults. Do not choose the other options unless directed to do so.

---

Note See the Installation Guide or the Quick Start Guide pertaining to your Cisco WLC platform for more details on running the bootup script and power-on self test.

• The Cisco WLC bootloader stores a copy of the active primary image and the backup image. If the primary image becomes corrupted, you can use the bootloader to boot with the backup image.

With the backup image stored before rebooting, choose Option 2: Run Backup Image from the boot menu to boot from the backup image. Then, upgrade with a known working image and reboot the Cisco WLC.

• You can control the addresses that are sent in the Control and Provisioning of Wireless Access Points (CAPWAP) discovery responses when NAT is enabled on the Management Interface using the following command:

config network ap-discovery nat-ip-only { enable | disable }

Here:

– enable —Enables use of NAT IP only in a discovery response. This is the default. Use this command if all the APs are outside the NAT gateway.

– disable —Enables use of both NAT IP and non-NAT IP in a discovery response. Use this command if APs are on the inside and outside the NAT gateway, for example, Local Mode and OfficeExtend APs are on the same Cisco WLC.

---

Note To avoid stranding of APs, you must disable AP link latency (if enabled) before you use the disable option for the config network ap-discovery nat-ip-only command. To disable AP link latency, use the config ap link-latency disable all command.

• You can reduce the network downtime using the following options:

– You can predownload the AP image.

– For FlexConnect access points, use the FlexConnect AP upgrade feature to reduce traffic between the Cisco WLC and the AP (main site and the branch). For more information about the FlexConnect AP upgrade feature, see the Cisco Wireless Controller Configuration Guide.

---

Note Predownloading Release 8.2.151.0 on a Cisco Aironet 1240 access point is not supported when upgrading from a previous Cisco WLC release. If predownloading is attempted on a Cisco Aironet 1240 access point, an AP disconnect will occur momentarily.

• Do not power down the Cisco WLC or any access point during the upgrade process; otherwise, you might corrupt the software image. Upgrading a Cisco WLC with a large number of access points can take as long as 30 minutes, depending on the size of your network. However, with the increased number of concurrent access point upgrades supported, the upgrade time should be significantly reduced. The access points must remain powered, and the Cisco WLC must not be reset during this time.
• To downgrade from Release 8.2.151.0 to Release 6.0 or an earlier release, perform either of these tasks:

– Delete all the WLANs that are mapped to interface groups, and create new ones.

– Ensure that all the WLANs are mapped to interfaces rather than interface groups.

• After you perform the following functions on the Cisco WLC, reboot the Cisco WLC for the changes to take effect:

– Enable or disable link aggregation (LAG)

– Enable a feature that is dependent on certificates (such as HTTPS and web authentication)

– Add a new license or modify an existing license

– Increase the priority of a license

– Enable HA

– Install the SSL certificate

– Configure the database size

– Install the vendor-device certificate

– Download the CA certificate

– Upload the configuration file

– Install the Web Authentication certificate

– Make changes to the management interface or the virtual interface

– Make changes to TCP MSS settings

Upgrading to Cisco WLC Software Release 8.2.x(GUI)

---

Step 1 Upload your Cisco WLC configuration files to a server to back up the configuration files.

---

Note We highly recommend that you back up your Cisco WLC configuration files prior to upgrading the Cisco WLC software.

Step 2 Follow these steps to obtain Cisco Wireless Release 8.2.151.0 software:

a. Click this URL to go to the Software Center:

http://www.cisco.com/cisco/software/navigator.html

b. Choose Wireless from the center selection window.

c. Click Wireless LAN Controllers.

The following options are displayed. Depending on your Cisco WLC platform, select either of these options:

– Integrated Controllers and Controller Modules

– Standalone Controllers

d. Select the Cisco WLC model number or name.

The Download Software page is displayed.

e. The software releases are labeled as follows to help you determine which release to download. Click a Cisco WLC software release number:

• Early Deployment (ED) —These software releases provide new features and new hardware platform support as well as bug fixes.
• Maintenance Deployment (MD) —These software releases provide bug fixes and ongoing software maintenance.
• Deferred (DF) —These software releases have been deferred. We recommend that you migrate to an upgraded release.

f. Click the filename ( filename.aes).

g. Click Download.

h. Read the Cisco End User Software License Agreement and click Agree.

i. Save the file to your hard drive.

j. Repeat steps a. through i. to download the remaining file.

Step 3 Copy the Cisco WLC software file ( filename.aes) to the default directory on your TFTP, FTP, or SFTP server.

Step 4 Choose Commands > Download File to open the Download File to Controller page.

Step 5 From the File Type drop-down list, choose Code.

Step 6 From the Transfer Mode drop-down list, choose TFTP, FTP, or SFTP.

Step 7 In the IP Address text box, enter the IP address of the TFTP, FTP, or SFTP server.

Step 8 If you are using a TFTP server, the default value of 10 retries for the Maximum Retries text field, and 6 seconds for the Timeout text field should work correctly without any adjustment. However, you can change these values, if desired. To do so, enter the maximum number of times that the TFTP server attempts to download the software in the Maximum Retries text box and the amount of time (in seconds) for which the TFTP server attempts to download the software, in the Timeout text box.

Step 9 In the File Path text box, enter the directory path of the software.

Step 10 In the File Name text box, enter the name of the software file ( filename.aes).

Step 11 If you are using an FTP server, perform these steps:

a. In the Server Login Username text box, enter the username with which to log on to the FTP server.

b. In the Server Login Password text box, enter the password with which to log on to the FTP server.

c. In the Server Port Number text box, enter the port number on the FTP server through which the download occurs. The default value is 21.

Step 12 Click Download to download the software to the Cisco WLC.

A message appears indicating the status of the download.

Step 13 After the download is complete, click Reboot.

Step 14 If you are prompted to save your changes, click Save and Reboot.

Step 15 Click OK to confirm your decision to reboot the Cisco WLC.

Step 16 For Cisco WiSM2 on the Catalyst switch, check the port channel and re-enable the port channel if necessary.

Step 17 If you have disabled the 802.11a/n and 802.11b/g/n networks in Choose Commands > Download File to open the Download File to Controller page., re-enable them.

Step 18 To verify that the 8.2.151.0 Cisco WLC software is installed on your Cisco WLC, click Monitor on the Cisco WLC GUI and view the Software Version field under Controller Summary.

 

---

Downloading and Installing a DTLS License for an LDPE Cisco WLC

---

Step 1 To download the Cisco DTLS license:

a. Go to the Cisco Software Center at this URL:

https://tools.cisco.com/SWIFT/LicensingUI/Home

b. From the Product License Registration page from the Get Other Licenses drop-down list, click IPS, Crypto, Other....

c. In the Wireless section, click Cisco Wireless Controllers (2500/5500/7500/WiSM2) DTLS License and click Next.

d. Follow the on-screen instructions to generate the license file. The license file information will be sent to you in an e-mail.

Step 2 Copy the license file to your TFTP server.

Step 3 Install the DTLS license either by using the Cisco WLC web GUI interface or the CLI:

• To install the license using the WLC web GUI, choose:

Management > Software Activation > Commands > Action : Install License

• To install the license using the CLI, enter this command:

license install tftp ://ipaddress /path /extracted-file

After the installation of the DTLS license, reboot the system. Ensure that the DTLS license that is installed is active.

 

Upgrading from an LDPE to a Non-LDPE Cisco WLC

---

Step 1 Download the non-LDPE software release:

a. Go to the Cisco Software Center at:

http://www.cisco.com/cisco/software/navigator.html?mdfid=282585015&i=rm

b. Choose the Cisco WLC model.

c. Click Wireless LAN Controller Software.

d. In the left navigation pane, click the software release number for which you want to install the non-LDPE software.

e. Choose the non-LDPE software release: AIR-X-K9-X-X.X.aes

f. Click Download.

g. Read the Cisco End User Software License Agreement and then click Agree.

h. Save the file to your hard drive.

Step 2 Copy the Cisco WLC software file ( filename.aes) to the default directory on your TFTP server or FTP server.

Step 3 Upgrade the Cisco WLC with this version by performing Step 3 through Step 18 detailed in the “Upgrading to Cisco WLC Software Release 8.2.x” section.

 

Table 7 Test Bed Configuration for Interoperability

Hardware/Software Parameter	Hardware/Software Configuration Type
Release	8.2.151.0
Cisco WLC	Cisco 55xx Series Controller
Access points	AIR-CAP3802E-B-K9, AIR-AP1852I-B-K9, AIR-AP2802I-B-K9
Radio	802.11ac, 802.11a, 802.11g, 802.11b, 802.11n
Security	Open, PSK (WPA-TKIP), PSK (WPA-TKIP, WPA2-AES), 802.1X (WPA-TKIP and WPA2-AES) (LEAP, EAP-FAST)
RADIUS	ACS 5.3, ISE 1.4
Types of tests	Connectivity, traffic, and roaming between two access points

Table 8 Laptop Client Type List

Client Type and Name	Version
Intel 3160	18.40.0.9
Intel 6205	15.16.0.2
Intel 6300	15.16.0.2
Intel 7260	18.33.3.2
Intel 7265	19.10.1.2
Intel 8260	19.10.1.2
Broadcom 4360	6.30.163.2005
Linksys AE6000 (USB)	5.1.2.0
Netgear A6200 (USB)	6.30.145.30
Netgear A6210(USB)	5.1.18.0
D-Link DWA-182 (USB)	6.30.145.30
Engenius EUB 1200AC(USB)	1026.5.1118.2013
Asus AC56(USB)	1027.515.2015
Dell 1520/Broadcom 43224HMS	5.60.48.18
Dell 1530 (Broadcom BCM4359)	5.100.235.12
Dell 1540	6.30.223.215
Dell 1560	6.30.223.262
MacBook Pro	OSX 10.11.6
MacBook Air old	OSX 10.11.5
MacBook Air new	OSX 10.11.5
Macbook Pro with Retina Display	OSX 10.12
Macbook New 2015	OSX 10.12

Table 9 Tablet Client Type List

Client Type and Name	Version
Apple iPad Air	iOS 10
Apple iPad Air 2	iOS 10
Apple iPad mini with Retina display	iOS 10
Apple iPad Pro	iOS 10
Apple iPad2	iOS 10
Apple iPad3	iOS 10
Google 10.2" Pixel C	Android 7.1.1
Google Nexus 9	Android 6.0.1
MC40N0	Android 4.4.4
MC9090-C030	OS 5.1.478 (Build 15706.3.5.2)
MC9190G	OS 6.00.000
MC92	Android 4.4.4
Microsoft Surface Pro 2	Windows 8.1 Driver: 14.69.24039.134
Microsoft Surface Pro 3	Windows 8.1 Driver: 15.68.3093.197
Microsoft Surface Pro 4	Windows 10 Driver: 15.68.9040.67
Motorola MC 55A	OS 5.2.23121(Build 23121.5.3.6)
Motorola MC 75A	OS 5.2.23137 (Build 23137.5.3.9)
Samsung Galaxy Note 3 – SM-N900	Android 5.0
Samsung Galaxy Tab 10.1- 2014 SM-P600	Android 4.4.2
Samsung Galaxy Tab Pro SM-T320	Android 4.4.2
Symbol MC70	Windows Mobile 05.01.0476
Symbol MC9090	Windows Mobile 5.1.478 (Build 15706.3.5.2)
Symbol TC55	Android 4.1.2
Symbol TC75	Android 4.4.3
Symbol VC5090	5.0.1400
Toshiba Thrive AT105	Android 4.0.4
Zebra MC55A	OS 5.2.29344 (Build 29344.5.3.12.40)
Zebra TC8000	Android 4.4.3

Table 10 Phone and Printer Client Type List

Client Type and Name	Version
Apple iPhone 4S	iOS 10.2
Apple iPhone 5	iOS 10.2
Apple iPhone 5c	iOS 10
Apple iPhone 5s	iOS 10.2
Apple iPhone 6	iOS 10.2
Apple iPhone 6 Plus	iOS 10.2
Apple iPhone 6s	iOS 10.2
Cisco 7921G	1.4.5.3.LOADS
Cisco 7925G	1.4.5.3.LOADS
Cisco 8861	Sip88xx.10-2-1-16
Cisco 9971	Sip88xx.10-2-1-16
Google Nexus 5	Android 6.0.1
Google Nexus 5X	Android 6.0.1
Google Pixel	Android 7.1.1
HP Color LaserJet Pro M452nw	version 2.4.0.125
HTC One	Android 5.0
LG G4	Android 5.1
Nokia Lumia 925	Windows Phone 8.10.12393.890
Nokia Lumia 1520	Windows Phone 8.10.14219.341
OnePlus One	Android 4.3
OnePlus Three	Android 6.0.1
Samsung Galaxy Mega SM900	Android 4.4.2
Samsung Galaxy Nexus GTI9200	Android 4.4.2
Samsung Galaxy S III	Android 4.3
Samsung Galaxy S4	Android 5.0.1
Samsung Galaxy S4 – GT-I9500	Android 5.0.1
Samsung Galaxy S5	Android 4.4.2
Samsung Galaxy S5-SM-G900A	Android 4.4.2
Samsung Galaxy S6	Android 6.0.1
Samsung Galaxy S7	Android 6.0.1
Sony Xperia Z Ultra	Android 4.4.2
Xiaomi Mi 4c	Android 5.1.1
Xiaomi Mi 4i	Android 5.1.1

---

Features Not Supported on Cisco 2504 WLC

• Autoinstall
• Cisco WLC integration with Lync SDN API
• Application Visibility and Control (AVC) for FlexConnect local switched access points

---

Note However, AVC for local mode APs is supported.

• Bandwidth Contract
• Service Port
• AppleTalk Bridging
• Right-to-Use Licensing
• Smart Licensing
• PMIPv6
• EoGRE
• AP Stateful Switchover (SSO) and client SSO
• Multicast-to-Unicast
• Cisco Smart Software Licensing

---

Note The features that are not supported on Cisco WiSM2 and Cisco 5508 WLC are not supported on Cisco 2504 WLCs too.

---

Note Directly connected APs are supported only in the local mode.

Features Not Supported on Cisco WiSM2 and Cisco 5508 WLC

• Spanning Tree Protocol (STP)
• Port Mirroring
• VPN Termination (such as IPsec and L2TP)
• VPN Passthrough Option

---

Note You can replicate this functionality on a Cisco 5500 Series WLC by creating an open WLAN using an ACL.

• Configuration of 802.3 bridging, AppleTalk, and Point-to-Point Protocol over Ethernet (PPPoE)
• Fragmented pings on any interface
• Right-to-Use Licensing
• Cisco 5508 WLC cannot function as mobility controller (MC). However, Cisco 5508 WLC can function as guest anchor in a New Mobility environment.
• Smart Licensing

Features Not Supported on Cisco Flex 7510 WLCs

• Static AP-manager interface

---

Note For Cisco Flex 7500 Series WLCs, it is not necessary to configure an AP-manager interface. The management interface acts as an AP-manager interface by default, and the access points can join on this interface.

• TrustSec SXP
• IPv6 and Dual Stack client visibility

---

Note IPv6 client bridging and Router Advertisement Guard are supported.

• Internal DHCP server
• Access points in local mode

---

Note An AP associated with the Cisco WLC in the local mode should be converted to the FlexConnect mode or monitor mode, either manually or by enabling the autoconvert feature. On the Cisco Flex 7500 WLC CLI, enable the autoconvert feature by entering the config ap autoconvert enable command.

• Mesh (use Flex + Bridge mode for mesh-enabled FlexConnect deployments)
• Spanning Tree Protocol (STP)
• Cisco Flex 7500 Series WLC cannot be configured as a guest anchor Cisco WLC. However, it can be configured as a foreign Cisco WLC to tunnel guest traffic to a guest anchor Cisco WLC in a DMZ.
• Multicast

---

Note FlexConnect local-switched multicast traffic is bridged transparently for both wired and wireless on the same VLAN. FlexConnect access points do not limit traffic based on Internet Group Management Protocol (IGMP) or MLD snooping.

• PMIPv6
• Smart Licensing

Features Not Supported on Cisco 5520, 8510, and 8540 WLCs

• Internal DHCP Server
• Mobility controller functionality in converged access mode

---

Note Smart Licensing is not supported on Cisco 8510 WLC.

Features Not Supported on Cisco Virtual WLCs

• Cisco Aironet 1850 and 1830 Series APs
• Internal DHCP server
• TrustSec SXP
• Access points in local mode
• Mobility/Guest Anchor
• Wired Guest
• Multicast

---

Note FlexConnect local-switched multicast traffic is bridged transparently for both wired and wireless on the same VLAN. FlexConnect access points do not limit traffic based on IGMP or MLD snooping.

• FlexConnect central switching in large-scale deployments

---

Note FlexConnect central switching is supported in only small-scale deployments, wherein the total traffic on Cisco WLC ports is not more than 500 Mbps.

FlexConnect local switching is supported.

• AP and Client SSO in High Availability
• PMIPv6
• EoGRE (Supported in only local switching mode)
• Workgroup Bridges
• Client downstream rate limiting for central switching
• SHA2 certificates
• Cisco OfficeExtend Access Points

Features Not Supported on Cisco Aironet 1550 APs (with 64-MB Memory)

• PPPoE
• PMIPv6

---

Note To see the amount of memory in a Cisco Aironet 1550 AP, enter the following command:

(Cisco Controller) >show mesh ap summary

Features Not Supported on Cisco Aironet 1810 OEAP, 1810W, 1830, 1850, 2800, and 3800 Series APs

2.For more details, see the Wi-Fi Alliance Technical Note TKIP document in the Wi-Fi Organization's website.

Features Not Supported on Cisco Aironet 1810 OEAP and 1810W Series APs

Features Not Supported on Cisco Aironet 1830 and 1850 Series APs

Features Not Supported on Cisco Aironet 2800 and 3800 Series APs

Features Not Supported on Mesh Networks

• Load-based call admission control (CAC). Mesh networks support only bandwidth-based CAC or static CAC
• High availability (fast heartbeat and primary discovery join timer)
• AP acting as supplicant with EAP-FASTv1 and 802.1X authentication
• Access point join priority (mesh access points have a fixed priority)
• Location-based services

Open Caveats

Resolved Caveats

---

Supported Cisco Aironet Access Points

Mobility Express Features

The following features and functionalities are present in this release:

• CLI-based Initial configuration wizard
• Up to three Network Time Protocol (NTP) servers, with support for FQDN names.
• Simple Network Management Protocol (SNMP) version 3 polling, supported via CLI only.
• IEEE 802.11r with support for Over-the-Air Fast BSS transition method, Over-the-DS Fast BSS transition method, and Fast Transition PSK authentication. Fast BSS transition methods are supported via CLI only.
• CCKM, supported via CLI only.
• Client ping test
• Changing the country code on the controller and APs on the network, via the controller GUI.
• Syslog messaging towards external server
• Software image download using HTTP for networks containing only AP 1850, AP 1830, or both kinds of access points.

The following are existing features, with continued support in the current release:

---

Note Even if the Cisco AP is 802.3ad (LACP)-compliant, link aggregation groups (LAG) are not supported on the AP while it has a Cisco Mobility Express software image.

• Scalability:

– Up to 25 APs

– Up to 500 clients

– Up to 16 WLANs

– Up to 100 rogue APs

– Up to 1000 rogue clients

• License—Does not require any licenses (Cisco Right-To-Use License or Swift) for APs.
• Operation— The primary AP can concurrently function as controller (to manage APs) and as an AP (to serve clients).
• Initial configuration wizard.
• Priming at distribution site.
• Default Service Set Identifier (SSID), set from factory. Available for initial provisioning only.
• Management—Through a web interface Monitoring Dashboard.
• Cisco Wireless Controller Best Practices.
• Quality of Service (QoS).
• Multicast with default settings.
• Application Visibility and Control (AVC)—Limited HTTP, with only Application Visibility and not Control. Deep Packet inspection with 1,500+ signatures.
• WLAN access control lists (ACLs).
• Roaming—Layer 2 roaming without mobility groups.
• IPv6—For client bridging only.
• High Density Experience (HDX)—Supported when managing APs that support HDX.
• Radio Resource Management (RRM)—Supported within AP group only.

---

Note Cisco 2800 and 3800 APs may experience issues forming RF neighborhood when NDP encryption is turned on in a mix deployment environment.

• WPA2 Security.
• WLAN-VLAN mapping.
• Guest WLAN login with Web Authorization.
• Local EAP Authentication (local RADIUS server).
• Local profile.
• Network Time Protocol (NTP) Server.
• Cisco Discovery Protocol (CDP) and Link Layer Discovery Protocol (LLDP).
• Clean Air.
• Simple Network Management Protocol (SNMP).
• Management—SSH, Telnet, Admin users.
• Reset to factory defaults.
• Serviceability—Core file and core options, Logging and syslog.
• Cisco Prime Infrastructure.
• Cisco CMX 10.x—Only CMX Presence is supported. CMX Connect, Location and Analytics are not supported.
• BYOD—Onboarding only.
• UX regulatory domain.
• Authentication, Authorization, Accounting (AAA) Override.
• IEEE 802.11k
• IEEE 802.11r

– Supported—Over-the-Air Fast BSS transition method

– Not Supported—Over-the-DS Fast BSS transition and Fast Transition PSK authentication

• Passive Client
• Voice with Call Admission Control (CAC), with Traffic Specification (TSpec)
• Fast SSID
• Terminal Access Controller Access Control System (TACACS)
• Management over wireless
• High Availability and Redundancy—Built-in redundancy mechanism to self-select a primary AP and to select a new AP as primary in case of a failure. Supported using VRRP.
• Software upgrade with preimage download
• Migration to controller-based deployment.

New Features and Functionalities

The following new features and functionalities have been introduced in this release.

• Updates to the Client View page in the Monitoring Dashboard.
• Client ping test and packet capture.
• Changing the country code on the controller and APs on the network.
• NTP servers for automatically setting the date and time.
• Software update using HTTP.
• CCKM support.

Compatibility with Other Cisco Wireless Solutions

See the Cisco Wireless Solutions Software Compatibility Matrix, at:

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

Software Release Information

Cisco Mobility Express software for Cisco Wireless Release 8.2.151.0, is as follows:

Installing Mobility Express Software

See the “Getting Started” section in the Mobility Express User Guide at the following URL:

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/82/user_guide/b_ME_User_Guide_82.html

Caveats

The open caveats applicable to the Cisco Mobility Express solution are listed under the “Caveats” section. All caveats associated with the Cisco Mobility Express solution have Cisco Mobility Express specified in the headline.

Related Documentation

• Cisco Mobility Express User Guide

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/82/user_guide/b_ME_User_Guide_82.html

• Cisco Aironet Universal AP Priming and Cisco AirProvision User Guide

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/ux-ap/guide/uxap-mobapp-g.html

Related Documentation

Cisco Wireless Controller

For more information about the Cisco WLCs, lightweight access points, and mesh access points, see these documents:

• The quick start guide or installation guide for your particular Cisco WLC or access point
• Cisco Wireless Solutions Software Compatibility Matrix
• Cisco Wireless Controller Configuration Guide
• Cisco Wireless Controller Command Reference
• Cisco Wireless Controller System Message Guide

For all Cisco WLC software related documentation, see http://www.cisco.com/c/en/us/support/wireless/wireless-lan-controller-software/tsd-products-support-series-home.html

Cisco Mobility Express

• Cisco Mobility Express User Guide

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mob_exp/83/user_guide/b_ME_User_Guide_83.html

• Cisco Aironet Universal AP Priming and Cisco AirProvision User Guide

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/ux-ap/guide/uxap-mobapp-g.html

Wireless Products Comparison

Use this tool to compare the specifications of Cisco wireless access points and controllers:

http://www.cisco.com/c/dam/assets/prod/wireless/cisco-wireless-products-comparison-tool/index.html

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at: http://www.cisco.com/c/en/us/td/docs/general/whatsnew/whatsnew.html.

Subscribe to What’s New in Cisco Product Documentation, which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.

Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)

Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.

© 2017 Cisco Systems, Inc. All rights reserved.