t_sec_sxp

Available Languages

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

SXP

SXP

On the Configuration > Security > SXP page, you can set SXP global configuration and add Peer connections.

ClosedGlobal
  1. In the Global section, check the SXP Enabled check box to enable SXP.
  2. Enter the Default Source IP address.
  3. Enter the Reconciliation Period in seconds.
  4. Enter the Retry Period in seconds.
  5. Check the Set New Default Password check box to reveal password information fields.
  6. From the Password Type drop-down list, choose the type.
  7. Enter an appropriate password in Enter Password.
  8. Click Apply.
ClosedPeer
  1. In the Peer section, click Add.
  2. Enter the Peer IP and Source IP.
  3. From the Password drop-down list, choose the type.
  4. From the Mode of Local Device drop-down list, choose the type.

  5. Click Add & Apply.

 

© 2018 Cisco Systems, Inc. All rights reserved.

 

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products