Global Configuration Mode Commands (T-Z)

Mode

This section includes the commands inclusion-frequency and overload-threshold through upf-load-control-profile and upf-overload-control-profile profiles.

Exec > Global Configuration

configure

Entering the above command sequence results in the following prompt:

[local]UPlane (config)#

Note

The commands or keywords/variables that are available are dependent on platform type, product version, and installed license(s).

The Global Configuration Mode is used to configure basic system-wide parameters.

upf-load-control-profile

Creates a UPF Load Control Profile and enters UPF Load Control Configuration Mode.

Product

UPF

Privilege

Administrator, Security Administrator

Mode

Exec > Global Configuration

configure

Entering this command sequence results in the following prompt: 

[local]UPlane (config)#

Syntax

[ no ] upf-load-control-profile  profile_name

no

Removes the specified UPF Load Control Profile.

upf-load-control-profile

Creates a UPF Load Control Profile and enters UPF Load Control Profile Configuration Mode.

profile_name

Must be an alphanumeric string 1–64 characters in length.

Usage Guidelines

Use this command to create a UPF Load Control Profile and enter UPF Load Control Profile Configuration Mode.

Example

The following example creates a UPF Load Control Profile named loadcontrolprof:
upf-load-control-profile loadcontrolprof

upf-overload-control-profile

Creates a UPF Overload Control Profile and enters UPF Overload Control Configuration Mode.

Product

UPF

Privilege

Administrator, Security Administrator

Mode

Exec > Global Configuration

configure

Entering this command sequence results in the following prompt: 

[local]UPlane (config)#

Syntax

[ no ] upf-overload-control-profile  profile_name

no

Removes the specified UPF Overload Control Profile.

upf-overload-control-profile

Creates a UPF Overload Control Profile and enters UPF Overload Control Profile Configuration Mode.

profile_name

Must be an alphanumeric string 1–64 characters in length.

Usage Guidelines

Use this command to create a UPF Overload Control Profile and enter UPF Overload Control Profile Configuration Mode.

Example

The following example creates a UPF Load Control Profile named ovrloadcontrolprof:
upf-overload-control-profile ovrloadcontrolprof