- Preface
- Product Overview
- Preparing for Installation
- Mounting the Access Point
- Installing Other Components
- Troubleshooting
- Appendix A - Access Point Tech Specs References
- Appendix B - Declarations of Conformity and Regulatory Information
- Appendix C - Access Point Pinouts
- Appendix D - Configuring DHCP Option 43
Access Point Tech Specs References
Access Point Data Sheet
The detailed technical specifications for the Cisco Aironet 1570 Series Outdoor Access Points are available at the following URL:
http://www.cisco.com/c/dam/en/us/products/collateral/wireless/aironet-1570-series/datasheet-c78-732348.pdf
You can also download a copy of the Cisco Aironet 1570 Series Outdoor Access Point Data Sheet from the above URL for offline use.
Radio Channels and Power Levels
For channel and maximum power level settings, refer to the Channels and Maximum Power Settings for Cisco Aironet Lightweight Access Points and Bridges document available at:
http://www.cisco.com/c/en/us/support/wireless/aironet-1570-series/products-installation-guides-list.html
Power Distribution Budget
Table A-1 lists the power distribution budget for AP1572IC access point configurations.
|
|
|
---|---|---|
Table A-2 lists the power distribution budget for AP1572EC access point configurations.
|
|
|
---|---|---|
Table A-3 lists the power distribution budget for AP1572EACaccess point configurations.
|
|
|
---|---|---|
Access Point Operating Temperature Specifications
|
|
---|---|
45°C (AP will be fully operational with 4Tx) If temperature continues to increase, the number of transmitters is decreased to 2Tx, and then to 1Tx at 55°C. |
|